| : |
( The attributes listed under "Global Attributes" affect every component in the Compaq Analyze system on the current machine, whether or not the component has been enrolled in the configuration.
2
| ( | : |
( P Changes to the Logging attributes (prefaced with "log") take effect immediately.
( Changes to the Communications and Controller attributes (prefaced with "comm" and "ctrlr," respectively) take effect only when a new Compaq Analyze process is started (such as the Director or another process that connects to the Director).
( P Be aware that changing a global configuration attribute affects both interfaces.
2
| ( | : |
( Table6-1 describes the ports used by Compaq Analyze and indicates whether or not they can be configured.
8 ?
| s |
L( If a port is configurable, you can change the port number used. Most ports are configured using the web interface, however, the commSocketListenerPort, which is used for connections to the director, can only be modified from the CLI."
e
>8 Connections to the DirectorA t
f( The commSocketListenerPort defines the TCP/IP socket port used by the Director to communicate with other processes on the same machine or on other machines on the network (Port 7901, by default).r
e2
H  | r ; Note r u | t
| t | : o Do not change the commSocketListenerPort attribute with the web interface. If you do, the Director cannot be stopped from that point on. After the socket port is changed, only a service that is already connected can stop the Director running on the old port. u a u | I
>( v To change the TCP/IP socket port attribute on all operating systems use the following command from the command prompt.
s
0( desta msg -chgport nnn
Where nnn is the new port number n
G
y( This command changes the port number and then stops the Director and all connected processes. After the Director has finished shutting down, you can safely restart it on the new port.B
s( The Director can only communicate with Directors on other machines that have the same TCP/IP socket port number defined in their configuration./
D
N2
| L | p(: | e
- ( To reprocess the system event log file, select Full View in the navigation frame and click the Reprocess button located in the display frame., i
- ( To reprocess any other log file, select its entry under the Other Logs heading in the navigation frame and click the Reprocess button located in the display frame.2 #
t( When you change between the Full Report Type and the Brief Report Type, the changes will not be visible in binary event logs that have already been processed using the web interface. When you change the report type, the output from manual and automatic analysis is cached using the previous report type. To view the analysis results with the new report type, you will need to reprocess the binary log file.
E
- A
C( q Refer to Chapter3 for more information on manual analysis and the Reprocess button.N
,
S
1
O
9
i
8 c | Title PageT | Prev" | NextNh | onMouseOut="self.status=''; return true">Table of Contents | Service Tools[ | Index |L