2
| : |
Analysis information can be viewed using any of the following methods:
When analysis is successfully started, the log file's icon is animated and a status message similar to the following is shown in the display frame (Figure3–17).
M 
8 U 
If the file cannot be processed for any reason, a message similar to the one in Figure3–18 is shown.
M
8 U 
@ Once the file is processed, the icon in the toolbar changes to reflect the status of the log file (see Section3.7). To view the analysis results in the display frame, click the log file's entry in the navigation tree. 2
| P | ; Note |
| : v You can view the results of analysis before a file has finished processing. Once Compaq Analyze has finished reading a file and has begun analysis, you can click on the file to display any problem reports and events that have been generated so far. Refer to Section3.7 for information on how to determine when analysis has started. Be aware that if you view the results before processing is completed, Compaq Analyze will not automatically update the display when it finishes analyzing the file. Once analysis completes, you must click the tab you are viewing again to see the full results. |
Both automatic and manual analysis results are shown in the display frame. The information is divided between the following tabs:
2
| P | ; Note |
| : If you have configured the User Settings so Compaq Analyze only performs manual translation, rather than translation and analysis, the Problem Reports tab is empty. See Section3.10.1 for more information on User Settings. |
-2
| " | Q(: | e
" When you are performing automatic analysis, the Clear button, shown in Figure3–19, appears in the toolbar.
s
M g
8 S 
t i
X The Clear button removes all the entries (problem reports and events) from the display tabs.
I2
| i | -(: | r
h When you are performing manual analysis, the button shown in Figure3–20 appears in the toolbar.
M l
8 M 
r "
G It is used to reprocess binary log files so they reflect changes to the report type. Refer to Chapter6 for more information on changing the report type.
2
| < | (: | /
E If the User Settings are configured to only perform manual translation, rather than translation and analysis, no information is shown on the problem reports tab (See Section3.10.1 for more information on User Settings). However, an Analyze button appears in the toolbar when you view the details of manual translation (Figure3–21).
M h
8 S 
d A
> Clicking the Analyze button will perform analysis for the current log file. Thus, if you need to perform analysis, it is not necessary to change the User Settings and reprocess the file.
i
e2
| r | "(: | "
i Compaq Analyze displays the results of analysis in a list in the display frame. You can view the details of any entry by clicking on it in the list. In order to make viewing events easier, navigation buttons are available at the top of each detailed entry. The navigation buttons are shown in Figure3–22.
=
M c
8 [ 
C n
/ The buttons are used to move between entries in the list, you can view the details for other events in the list using the Previous and Next buttons. Click the Index button to redisplay the list of entries in the display frame. If there is no event in the list for the Next or Previous button to display, you will receive an informational message and detailed entry will not change. 2
8
| P | ; Note a |
| u | : O If your user settings display event details in a separate window, the Index button will not be available and clicking the Previous and Next buttons will not open additional new windows. See Section3.10.1 for more information on user settings. a / | /
,2
| f | (: | e
The Problem Reports tab displays the reports that were generated by analysis. An example of the problem report list is shown in Figure3–23.
M A
8 ;)
b Click for Larger Image
D The filters that affect how problem reports are displayed are listed at the top of the screen. Be aware that the screen only shows the filters that apply to analysis and may not list all the filters you applied.
E= To view the details of a specific report, click on its entry in the list of available problem reports. The report details are shown in the display frame. Refer to AppendixA for an example of a problem report.
O
#2
| N | A(: | Z
i2
| P | l ; 2 Note L " | I
| : S The Summary tab is only available when you perform manual analysis. Hence, if you select Real Time Monitoring from the Navigation Tree, the Summary tab is not displayed.< s E |
sd The Summary tab describes the event types contained in the binary event log file. Each event type is listed along with the number of occurrences. The time stamps for the first and last events are listed under the summary information. (Figure3–24).
M N
8 ;)
b Click for Larger Image
G The filters that affected the output are listed at the top of the screen. Be aware that the screen only shows the filters that apply to the summary report and may not list all the filters you applied.
2
| r | g(: | 0
tV The Events tab provides translation information for the events in the binary event log file. Depending on the filtering options that were applied during processing, all the events in the log file may or may not be shown (Figure3–25).
M
8 ;)
b Click for Larger Image
c
The filters that affected the output are listed at the top of the screen. Be aware that the screen only shows the filters that apply to translation and may not list all the filters you applied.
E To view the text of a translated event in the display frame, click on the desired entry in the list of events. Compaq Analyze includes information about the source of the event and the time it was created at the top of the detailed display. Refer to AppendixA for an example of a translated event. 2
| P | g ; s Note 3 > | 3
| / | : O You can control the fields that are shown on the events tab from the User Settings window. Refer to Section3.10.1 for more details.m n Z | T
>2
| e | s(: |
e You can sort the results shown on any tab using the field names. Any field name that appears in blue can be used to sort. Simply click on the field name to sort based on that field. An arrow appears next to the field to indicate the direction of the sorting. The sorting options are applied to all the tabs, regardless of which tab was used to specify the sorting criteria.
T
D Entries can be sorted in either ascending or descending order. To change the sort order, click on the field name a second time. The arrow next to the field changes direction to indicate the new sort order. When the arrow is pointing up, it indicates an ascending sort. When the arrow is pointing down, it indicates a descending sort.
N
O