                         H                     DEC_PHIGS___________________________________________,                     Installing DEC PHIGS for'                     OpenVMS VAX Systems   -                     Order Number: AA-PBE5H-TE                          April 1995  F                     This document contains instructions for installingE                     DEC PHIGS[TM] on an OpenVMS[TM] VAX[TM] operating C                     system. It also explains how to read the online I                     release notes before or after installing the product. C                     This document applies to DEC PHIGS Version 3.1.               E                     Revision/Update Information:  This revised manual @                                                   supersedes theF                                                   Installing DEC PHIGSA                                                   for OpenVMS VAX G                                                   Systems (Order Number ?                                                   AA-PBE5G-TE).   E                     Operating System and Version: OpenVMS VAX Version B                                                   5.5-2 or higher.@                                                   VAXstation[TM]>                                                   Requirement:I                                                   DECwindows[TM] Motif[R] A                                                   Version 1.2 for =                                                   OpenVMS VAX   G                     Software Version:             DEC PHIGS for OpenVMS A                                                   VAX Version 3.1   1                     Digital Equipment Corporation *                     Maynard, Massachusetts                                   J           ________________________________________________________________'           First Printing, December 1987            Revised, April 1989             Revised, February 1990!           Revised, September 1990            Revised, January 1992            Revised, January 1994            Revised, July 1994           Revised, October 1994            Revised, April 1995   @           Digital Equipment Corporation makes no representationsA           that the use of its products in the manner described in B           this publication will not infringe on existing or futureB           patent rights, nor do the descriptions contained in thisB           publication imply the granting of licenses to make, use,>           or sell equipment or software in accordance with the           description.  ?           Possession, use, or copying of the software described >           in this publication is authorized only pursuant to a=           valid written license from Digital or an authorized            sublicensor.  A            Digital Equipment Corporation 1987, 1989, 1990, 1992, *           1994, 1995. All Rights Reserved.  A           The postpaid Reader's Comments forms at the end of this @           document request your critical evaluation to assist in)           preparing future documentation.   ;           The following are trademarks of Digital Equipment @           Corporation: DDIF, DEC, DECnet, DEC C, DEC Open3D, DEC?           PHIGS, DECwindows, Digital, OpenVMS, VAX, VAXcluster, 0           VAXstation, VMS, and the DIGITAL Logo.  3           The following are third-party trademarks:   :           Motif is a registered trademark of Open Software           Foundation, Inc.  @           PostScript is a registered trademark of Adobe Systems,           Incorporated.   E                                                                ZK6195   /           This document is available on CD-ROM.   D           This document was prepared using VAX DOCUMENT Version 2.1.                                           C   _________________________________________________________________   C                                                            Contents       C   Preface...................................................      v   )   1  Preparing for DEC PHIGS Installation   C         1.1   Prerequisite Software.........................    1-1 C         1.2   Online Release Notes..........................    1-2 C         1.3   Media Distribution Kit........................    1-2 C         1.4   License Registration..........................    1-3 C         1.5   Installation Procedure Requirements...........    1-3 C         1.5.1     Privileges................................    1-4 C         1.5.2     Disk Space................................    1-4 9         1.5.3     Global Pages and Global Sections System C                   Parameters................................    1-5 ;         1.5.3.1     Determining the Global Pages and Global C                     Sections Available......................    1-6 ;         1.5.3.2     Determining the Global Pages and Global C                     Sections Used...........................    1-7 C         1.5.3.3     Modifying the Global Pages Parameter....    1-8 1         1.5.3.4     Modifying the Global Sections C                     Parameter...............................    1-8 6         1.5.3.5     Recalculating the Global Pages andC                     Global Sections Parameters..............    1-9 C         1.5.4     Other System Parameters...................    1-9 C         1.5.5     User Account Quotas.......................    1-9 C         1.6   Backing Up Your System Disk...................   1-10      2  Installing DEC PHIGS   C         2.1   Installation Procedure........................    2-1 C         2.2   Error Recovery................................   2-13                   C                                                                 iii                    !     3  After Installing DEC PHIGS   =           3.1   Installing DEC PHIGS on an OpenVMS VAXcluster E                 Configuration.................................    3-1 E           3.2   Editing the Startup File......................    3-2 5           3.3   Running the Installation Verification E                 Procedure.....................................    3-2 E           3.4   Installing Maintenance Updates................    3-3 E           3.5   Determining and Reporting Problems............    3-4   %     A  Files Installed on Your System   E           A.1   DEC PHIGS Development Kit Files...............    A-1 E           A.2   DEC PHIGS Run-Time-Only Kit Files.............   A-11        B  Sample Installations   E           B.1   DEC PHIGS Development Kit Installation........    B-1 E           B.2   DEC PHIGS Run-Time-Only Kit Installation......    B-4        Figures   E           3-1       Sample IVP Display........................    3-3   
     Tables  E           1-1       Disk Space Requirements...................    1-4   5           1-2       Minimum Required System Parameter E                     Values....................................    1-5   5           A-1       Installed Files for the DEC PHIGS E                     Development Kit...........................    A-1   5           A-2       Installed Files for the DEC PHIGS E                     Run-Time-Only Kit.........................   A-11                                      iv                             I         _________________________________________________________________   I                                                                   Preface       G               This guide describes how to install the DEC PHIGS Version E               3.1 development kit and run-time-only kit on an OpenVMS C               VAX operating system. Because this installation guide F               is not usually revised for software maintenance updates,B               you should read the Read Before Installing or Using H               DEC PHIGS for OpenVMS VAX Systems letter for a summary of D               the significant changes to the installation procedure.  E               Keep this document with your distribution kit. You will H               need it to install maintenance updates or to reinstall DEC)               PHIGS for any other reason.   E               At the back of the printed version of this document are I               two Reader's Comments forms. If you have any comments about I               this document, fill out one form and mail it; your comments H               will be considered for the next revision of this document.           Intended Audience   I               This manual is for system managers installing DEC PHIGS for                OpenVMS VAX.  "         Structure of this Document  2               This manual is organized as follows:  F               o  Chapter 1 describes the preparations and requirements4                  necessary for installing DEC PHIGS.  I               o  Chapter 2 provides the step-by-step instructions for the                   installation.  E               o  Chapter 3 describes the operations you perform after                   installation.  E               o  Appendix A lists the files installed with DEC PHIGS.   I               o  Appendix B contains sample development kit and run-time- (                  only kit installations.    I                                                                         v                    .     Manuals in the DEC PHIGS Documentation Set  E           In addition to this manual, the DEC PHIGS documentation set )           includes the following manuals:   3           o  DEC PHIGS Ada Binding Reference Manual   1           o  DEC PHIGS C Binding Reference Manual   5           o  DEC PHIGS ISO C Binding Reference Manual   ;           o  DEC PHIGS ISO Fortran Binding Reference Manual   6           o  DEC PHIGS PHIGS$ Binding Reference Manual  >           o  Device Specifics Reference Manual for DEC GKS and              DEC PHIGS  +           o  Getting Started with DEC PHIGS    (           o  DEC PHIGS Developer's Guide   >          If you use DEC PEXlib, you may require the DEC Open3D@          PEXlib C Binding Reference Manual, which is part of the*          DEC Open3D[TM] documentation set.       Related Manuals   ?           For information on OpenVMS system management, see the            following manuals:  ,           o  OpenVMS System Manager's Manual  .           o  Guide to Maintaining a VMS System  6           o  OpenVMS License Management Utility Manual  4           o  Guide to OpenVMS Performance Management  #     Conventions Used in This Manual   ?               The following conventions are used in this guide:   C               UPPERCASE TEXT         Uppercase letters indicate the H                                      name of a command, file, parameter,;                                      procedure, or utility.   I               bold                   Boldface text is used in interactive D                                      examples to indicate typed user+                                      input.             vi                   D           $                      The dollar sign is used to indicateC                                  the DCL prompt. This prompt may be :                                  different on your system.  E           system output          This typeface is used in interactive E                                  and code examples to indicate system B                                  output. In text, this typeface isC                                  used to indicate the exact name of C                                  a command, option, partition, path :                                  name, directory, or file.  B           [logical-name]         Square brackets indicate that theC                                  enclosed item is optional. (Square D                                  brackets are not, however, optionalB                                  in the syntax of a directory nameB                                  in a file specification or in theD                                  syntax of a substring specification=                                  in an assignment statement.)   B           <Ctrl/x>               In procedures, a sequence such asA                                  <Ctrl/X> indicates that you must E                                  hold down the key labeled Ctrl while D                                  you press another key or a pointing/                                  device button.   C           <Return>               In procedures, a key name is shown D                                  enclosed to indicate that you press7                                  a key on the keyboard.   C           VMS[TM]                The terms VMS and OpenVMS refer to ;           OpenVMS                the same operating system.   @                                  Vertical ellipsis in an example@               .                  means that information has been)               .                  omitted.                .                                 I                                                                       vii                            I                                                                         1 I         _________________________________________________________________   I                                      Preparing for DEC PHIGS Installation     F               This chapter describes the preparations and requirements=               necessary for installing DEC PHIGS Version 3.1.   A               This chapter will help you determine the following:   G               o  Whether the system on which you will install DEC PHIGS 8                  has the prerequisite software installed  5               o  How to read the online release notes   A               o  If installing DEC PHIGS from media, whether your D                  distribution kit includes all the components listed/                  on the Bill of Materials (BOM)   3               o  How to register a software license   D               o  The privileges required to perform the installation  2               o  How much disk space you will need  E               o  Whether the global pages and sections parameters are !                  defined properly   I               o  Whether the process account quotas are defined correctly   0               o  How to back up your system disk  !         1.1 Prerequisite Software   H               To install DEC PHIGS on a VAXstation workstation, you must4               have the following products installed:  E               o  OpenVMS VAX Operating System Version 5.5-2 or higher   G               o  DECwindows Motif for OpenVMS VAX Version 1.2 or higher   0               o  DEC C[TM] Version 4.0 or higher  I                  This software must be installed if you are using OpenVMS I                  VAX Version 5.5-2; however, no DEC C license is required "                  to run DEC PHIGS.    I                                  Preparing for DEC PHIGS Installation 1-1                    ?           You must also have the following OpenVMS VAX classes:   *           o  OpenVMS VAX required save set  :           o  Network support-where full DECwindows network'              functionality is necessary   :           o  Programming support-required by the DEC PHIGS              development kit  >           If you are using DEC PHIGS on a workstation, DigitalC           recommends the OpenVMS VAX class for workstation support.        1.2 Online Release Notes  A           DEC PHIGS provides online release notes. You can access B           release notes during the installation procedure when youD           invoke VMSINSTAL with the OPTIONS N parameter. This optionD           lets you read or print the release notes before installing           DEC PHIGS.  C           To obtain the DEC PHIGS release notes for the development <           or run-time-only kit after installation, print the           following files:  >           o  SYS$HELP:DECPHIGS031.RELEASE_NOTES (ASCII format)  A           o  SYS$HELP:DECPHIGS031_RELEASE_NOTES.PS (PostScript[R]               format)  0           o  SYS$HELP:DECPHIGSJ031.RELEASE_NOTES  3           o  SYS$HELP:DECPHIGSJ031_RELEASE_NOTES.PS        1.3 Media Distribution Kit  @           Your bill of materials (BOM) and indented bills report>           (BIL) specify the number and contents of your media.@           Be sure to check the contents of your kit against thisA           information. If your kit is damaged or if you find that D           parts of it are missing, call your Digital representative.B           For more information on how to mount distribution media,D           see your processor-specific installation/operations guide,A           which also details several options for the installationo           procedure.              ,     1-2 Preparing for DEC PHIGS Installation                             1.4 License Registration  I               Before you install and run DEC PHIGS Version 3.1 on a newly:I               licensed node or cluster, you must first register a LicenseuG               Product Authorization Key (License PAK) using the LicensegG               Management Facility (LMF). The PAK is a paper certificate F               that contains information about the license that enablesF               you to use the software. The License PAK is shipped withD               the kit if you ordered the license and media together;F               otherwise, the PAK is shipped separately to the location.               specified on your license order.  D               If you are installing DEC PHIGS as an update on a node@               or cluster already licensed for this software, youA               have already completed the License PAK registration A               requirements. If you are installing prerequisite or D               optional software along with DEC PHIGS, review the PAKB               status and install the PAKs for this prerequisite or=               optional software before you install DEC PHIGS.   G               To register a license under the OpenVMS operating system, G               first log in to the system manager's account, SYSTEM. You_?               can then register the license in one of two ways:   H               o  Invoke the SYS$UPDATE:VMSLICENSE.COM procedure. When itH                  prompts you for information, respond with the data from"                  your License PAK.  F               o  Type the LICENSE REGISTER command with the qualifiers>                  corresponding to the License PAK information.  E               If you plan to use DEC PHIGS on more than one node in a F               VAXcluster[TM] configuration, you will need to perform aE               license load on the other nodes after you complete this 8               installation. See Section 3.1 for details.  D               For complete information on using LMF, see the OpenVMS0               License Management Utility Manual.  /         1.5 Installation Procedure Requirementst  F               The following sections describe the various requirements>               for installing DEC PHIGS. The installation takesE               approximately 5 to 30 minutes, depending on your system                configuration.              I                                  Preparing for DEC PHIGS Installation 1-3  o  e                   1.5.1 Privileges  C           To install DEC PHIGS, you must be logged in to an accounthB           that has the SETPRV privilege, or at least the following           privileges:              o  CMKRNL              o  WORLD             o  SYSPRV,  =           When you invoke VMSINSTAL to begin the installationg>           procedure, VMSINSTAL turns off the BYPASS privilege.  B           After installation, each user account must have at leastD           the TMPMBX and NETMBX privileges to use DEC PHIGS. Use theC           OpenVMS Authorize Utility to determine whether users have &           the privileges they require.       1.5.2 Disk Space  @           The DEC PHIGS requirements for free disk storage spaceC           are different during installation and after installation. 2           Table 1-1 summarizes these requirements.  E           ___________________________________________________________ +           Table 1-1 Disk Space Requirements.E           ___________________________________________________________iB                                      Blocks During    Blocks AfterB           Kit                        Installation     InstallationE           ___________________________________________________________K  <           DEC PHIGS Development Kit  70,000           65,000           Version 3.1.  <           With Ada option            90,000           85,000  <           DEC PHIGS Run-Time-Only    40,000           36,000           Kit Version 3.1 E           ___________________________________________________________   ?           To determine the number of free blocks on the current E           system disk, enter the following command at the DCL prompt:.  .           $ SHOW DEVICE SYS$SYSDEVICE <Return>            ,     1-4 Preparing for DEC PHIGS Installation .                 G                 _______________________ Caution _______________________   B                 You must ensure that your system has the necessaryD                 global page and global section SYSGEN quotas for theB                 installation. Otherwise, the DCL tables may become0                 corrupted in certain situations.F                 ______________________________________________________  @         1.5.3 Global Pages and Global Sections System Parameters  G               The installation of DEC PHIGS requires minimum values foraH               the system parameters defining the global pages and globalF               sections. These values are shown in Table 1-2. DependingG               on the kinds of programs and applications running at your 9               site, you may need to define larger values.   I               ___________________________________________________________ @               Table 1-2 Minimum Required System Parameter ValuesI               ___________________________________________________________ 6               System Parameter           Minimum ValueI               ___________________________________________________________   1               GBLPAGES[1]                n + 6500   /               GBLSECTIONS[1]             n + 42.I               ___________________________________________________________.E               [1]The n variable refers to the system parameter values.G               that are currently in use. To install DEC PHIGS, you must.<               increase those values by the number indicated.H               These dynamic system parameters must be set permanently toG               values equal to or greater than the values listed. Do notn;               decrease these values after the installation.eI               ___________________________________________________________   5               The following sections describe how to:   I               o  Determine the number of global pages and global sections-                  available  D               o  Determine the global pages and global sections used  2               o  Modify the global pages parameter  5               o  Modify the global sections parameter   A               o  Recalculate the global pages and global sections H                  parameters in order to take the new values into account          I                                  Preparing for DEC PHIGS Installation 1-5                    <     1.5.3.1 Determining the Global Pages and Global Sections             Available   D           You can determine the available global pagelets and globalD           sections using the WRITE command with the F$GETSYI lexicalC           function. The following example shows how to display this D           information on your terminal (the default for SYS$OUTPUT):  ?           $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLPAGES") <Return>a           15848 ?           $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLSECTS") <Return>            24  D           If the values displayed by the system are greater than theE           values in Table 1-2, you do not need to increase the values B           for these parameters. If the values of free global pagesC           or global sections are less than the values in Table 1-2, E           you must increase the parameter values, as described in thee           following sections.n  >           You can also determine the number of global sections2           available using the following procedure:  '           1. Invoke the SYSGEN Utility:   -              $ RUN SYS$SYSTEM:SYSGEN <Return>i)              SYSGEN> USE CURRENT <Return>d  ?           2. Determine the number of global sections available:n  .              SYSGEN> SHOW GBLSECTIONS <Return>  L       Parameter Name     Current   Default   Minimum   Maximum Unit  DynamicL       --------------     -------   -------   -------   ------- ----  -------D       GBLSECTIONS         512       250        20      4095 Sections  @              The first number displayed is the current number ofB              global sections. Compare this number to the number ofD              global sections in use displayed by the OpenVMS Install+              Utility (see Section 1.5.3.2).n  *           3. Exit from the SYSGEN Utility:  "              SYSGEN> EXIT <Return>              ,     1-6 Preparing for DEC PHIGS Installation                   A     1.5.3.2 Determining the Global Pages and Global Sections Used   A           To determine the global pages and global sections used:   0           1. Invoke the OpenVMS Install Utility:  9              $ INSTALL :== $INSTALL/COMMAND_MODE <Return>               $ INSTALL <Return>R  7           2. Determine the number of global pages used:n  2              INSTALL> LIST/GLOBAL/SUMMARY <Return>  <                      Summary of Local Memory Global Sections  I              nn Global Sections Used,  nnnn/nnnn Global Pages Used/Unused   #              INSTALL> EXIT <Return>a  B              The system displays a summary of the number of globalD              sections used, the number of global pages used, and the.              number of global pages available.  3           3. Exit from the OpenVMS Install Utility:   #              INSTALL> EXIT <Return>D  0     1.5.3.3 Modifying the Global Pages Parameter  /           To modify the number of global pages:   E           1. If there are fewer than 6500 pages available, modify theS'              GBLPAGES system parameter.G  A              You can modify the GBLPAGES parameter by editing thegA              SYS$SYSTEM:MODPARAMS.DAT file. To change a parameteraC              value in this file, delete the current value and enter B              the new value. (Another way of allocating space is toD              delete an existing known image with the OpenVMS Install              Utility.)  C              To modify GBLPAGES, use ADD_GBLPAGES as shown, where no2              is the number of global pages to add:                ADD_GBLPAGES = n   C              Note that when you set the page file quota, you should A              not use a value that exceeds the amount of page file +              space available on the system.              2. Exit the editor.   I                                  Preparing for DEC PHIGS Installation 1-7t y                 B           3. Update the GBLPAGES parameter by invoking the AUTOGEN<              command procedure described in Section 1.5.3.5.  3     1.5.3.4 Modifying the Global Sections Parameters  2           To modify the number of global sections:  D           1. If the number of global sections in use plus 42 exceeds>              the current number of global sections, modify the#              GBLSECTIONS parameter.   D              You can modify the GBLSECTIONS parameter by editing theA              SYS$SYSTEM:MODPARAMS.DAT file. To change a parameter C              value in this file, delete the current value and enter               the new value.h  A              To modify GBLSECTIONS, use ADD_GBLSECTIONS as shown, =              where n is the number of global sections to add:i                 ADD_GBLSECTIONS = n  C              Note that when you set the page file quota, you should A              not use a value that exceeds the amount of page file +              space available on the system.s             2. Exit the editor.   E           3. Update the GBLSECTIONS parameter by invoking the AUTOGEN <              command procedure described in Section 1.5.3.5.  >     1.5.3.5 Recalculating the Global Pages and Global Sections             Parameters
              RC           To update the GBLPAGES and GBLSECTIONS parameters, invoke @           the AUTOGEN command procedure, SYS$UPDATE:AUTOGEN.COM:
           7           $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT <Return>   @           AUTOGEN automatically recalculates the parameters withC           the values you defined manually. When you specify REBOOT, @           AUTOGEN performs an automatic system shutdown and thenC           reboots the system. Any users logged on to the system are 7           immediately disconnected during the shutdown.   ?           AUTOGEN also automatically adjusts some of the SYSGEN A           parameters, based on the consumption of resources since B           the last reboot. If you do not want to take advantage ofE           this automatic adjustment, include the NOFEEDBACK qualifier &           on the AUTOGEN command line.      ,     1-8 Preparing for DEC PHIGS Installation c  t              G               For more information about using AUTOGEN, see the OpenVMSD'               System Management Subkit.h  %         1.5.4 Other System Parametersl  G               The installation for DEC PHIGS requires that you increaseEI               the values of the CLISYMTBL and CTLPAGES system parameters. G               Once the installation is complete, you can decrease thesen<               values to ensure efficient system performance.  !         1.5.5 User Account Quotasm  E               To use DEC PHIGS, you must have an account with an open H               file limit (FILLM) of at least 20. In addition, if you areI               using the Ada binding, the FILLM should be set to 2000, andi1               the BYTLM should be set to 200,000.t  B               Using the OpenVMS Authorize Utility (AUTHORIZE), youA               can compare the current values of these quotas withrE               the requirements for DEC PHIGS. The account used in thek6               following example is the SYSTEM account:  /               $ SET DEFAULT SYS$SYSTEM <Return>o&               $ RUN AUTHORIZE <Return>'               UAF> SHOW SYSTEM <Return>O  B               To change the values of these quotas, use the MODIFYC               command. For more information, see the OpenVMS System 4               Management Utilities Reference Manual.  '         1.6 Backing Up Your System Disko  C               Digital recommends that you back up your system disk,EG               before installing any software. Use the backup procedures ?               that are established at your site. For details on H               performing a backup, see the section on the Backup Utility6               in the OpenVMS System Management Subkit.                              I                                  Preparing for DEC PHIGS Installation 1-9r                           I                                                                         2 I         _________________________________________________________________t  I                                                      Installing DEC PHIGSs    I               This chapter describes the DEC PHIGS installation procedure B               and the operations you may need to perform after theC               installation. For a list of the files and directories H               created during the installation procedure, see Appendix A.I               For sample development kit and run-time-only installations,m"               refer to Appendix B.  D               To abort the installation procedure at any time, pressG               Ctrl/Y. When you press Ctrl/Y, the installation procedureHC               deletes all files it has created up to that point and)?               exits. You can then start the installation again. H               Attempting to link programs against the DEC PHIGS run-time-               library results in link errors.d  "         2.1 Installation Procedure  C               Before you install DEC PHIGS, Digital recommends thatcB               you back up your system disk. Once you have done so,D               you can begin the installation. The installation takesE               approximately 5 to 30 minutes, depending on your systemi               configuration.  F               You should not install DEC PHIGS run-time Version 3.1 ifH               you have already installed the full development kit of DECF               PHIGS Version 3.1. If you do, the installation procedureG               will overwrite the development kit with the run-time-only G               kit. To determine which version of DEC PHIGS is currently 8               installed, type the following DCL command:  N       $ ANALYZE/IMAGE/INTERACTIVE/HEADER SYS$COMMON:[SYSLIB]PHIGS$RTL <Return>  8               The procedure for installing DEC PHIGS is:  D               1. Log in to a privileged account and set your default4                  device and directory to SYS$UPDATE.  E                  Digital recommends that you use the system manager'sd                  account.t  *                  Username: SYSTEM <Return>+                  Password:         <Return> 2                  $ SET DEFAULT SYS$UPDATE <Return>  I                                                  Installing DEC PHIGS 2-1r r  y                         2. Invoke VMSINSTAL.  @              When you invoke VMSINSTAL, it checks the following:  B              o  Whether you are logged in to a privileged account.E                 You should install software from the system manager'stE                 account with your default device and directory set ton                 SYS$UPDATE.l  4              o  The installing account has adequate:                      Disk space                     Global pages "                    Global sections!                    Account quotas   F                  o  Whether you have adequate quotas for installation.B                     VMSINSTAL requires the following minimum quota                     values:e  !                        ASTLM = 24e!                        BIOLM = 18h$                        BYTLM = 18000!                        DIOLM = 18n!                        ENQLM = 30.!                        FILLM = 20e  ;                  o  Whether the following conditions exist:r  <                     -  DECnet[TM] network is up and running.  9                     -  Users are logged in to the system.   I                  If VMSINSTAL detects problems, you will be asked whethereB                  you want to continue the installation. You shouldH                  correct these problems before resuming the installationE                  procedure. If you want to continue, type YES. If your=                  want to stop the installation, press Return.n  B                  To invoke the VMSINSTAL command procedure, enter:  M           $ @SYS$UPDATE:VMSINSTAL saveset-name device-name OPTIONS N <Return>   .                  The VMSINSTAL parameters are:                    saveset-namevE                  The installation name for the component. For the DECc5                  PHIGS development kit, use the name:l                    DECPHIGS031         2-2 Installing DEC PHIGS                   ?              For the DEC PHIGS run-time-only kit, use the name:o                DECPHIGSRTO031                 ddcuTB              The name of the device on which you plan to mount the@              distribution volumes for the DEC PHIGS installationD              media, where dd is the device code, c is the controllerC              code, and u is the unit number. For example, DKA400 ise*              the device name for a CD-ROM.  @              You do not have to use the console drive to installA              DEC PHIGS. If you do use the console drive after the C              installation, you should replace any media you removed_6              from the drive prior to the installation.  A              For CD-ROM media, you must also supply the directory_A              location of the DEC PHIGS save set on the CD-ROM. To C              obtain this location, see the Software Product Library D              CD-ROM User's Guide booklet that accompanies the CD-ROME              distribution kit, or complete the following steps beforem'              starting the installation:   E              1. Determine whether the CD-ROM drive is already mounted5(                 by entering the command:  .                 $ SHOW DEVICE DKA400: <Return>  C                 If the device is mounted, skip to the next step. If_E                 it is not mounted, type the appropriate MOUNT command E                 to mount the CD-ROM, omitting the /FOREIGN qualifier..  B              2. Obtain the directory name by entering the command:  B                 $ DIRECTORY DKA400:[000000]*decphigs*.dir <Return>  B                 The directory name will be displayed; for example:  )                 Directory DKA400:[000000]m  <                 DECPHIGS031.DIR;1          (development kit)  >                 DECPHIGSRTO031.DIR;1       (run-time-only kit)  E              3. Obtain the save set name by using a DIRECTORY commandn?                 specifying the directory file from the previous_E                 command. For example, for the development kit, enter:e  @                 $ DIRECTORY DKA400:[DECPHIGS031.KIT]*.A <Return>      I                                                  Installing DEC PHIGS 2-3l l                 2                  For the run-time-only kit, enter:  D                  $ DIRECTORY DKA400:[DECPHIGSRTO031.KIT]*.A <Return>                    OPTIONS NE                  An optional parameter that enables you to access the_C                  release notes. If you do not include the OPTIONS NiH                  parameter, VMSINSTAL does not ask you about the releaseB                  notes. You should review the release notes beforeG                  proceeding with the installation, because they contain_?                  additional information about the installation.   I                  Note that there are several other options you can select +                  when you invoke VMSINSTAL:_  *                  o  Auto_answer option (A)  F                     This option initially creates a file that containsE                     your answers to VMSINSTALL questions and prompts.tH                     You can then use the option (and the answer file) toF                     save time during a reinstallation (typically after+                     upgrading your system).   +                  o  Get save set option (G)a  G                     This option lets you temporarily store product save_C                     sets on a magnetic tape or in a disk directory.   '                  o  File log option (L)a  H                     This option logs all activity to the terminal during!                     installation.b  -                  o  Alternate root option (R)l  H                     This option lets you install the product to a system?                     root other than that of the current system.c  =                  If you do not supply the save set and deviceeC                  names, VMSINSTAL prompts you for them later in thefD                  installation. VMSINSTAL does not prompt you for anyD                  options, however, so be sure to include the desiredF                  options on the VMSINSTAL command line. If you specifyG                  more than one option, separate the options with commas F                  (for instance, OPTIONS A,N). See the documentation onG                  software installation in the OpenVMS System Management B                  Subkit for detailed information on these options.               2-4 Installing DEC PHIGS Y  F              C              The following example invokes VMSINSTAL to install DECsE              PHIGS development kit from a CD-ROM and shows the systeme              response:  J              $ @SYS$UPDATE:VMSINSTAL DECPHIGS031 DKA400 OPTIONS N <Return>  K                    OpenVMS VAX Software Product Installation Procedure V6.1u  (              It is dd-mmm-yyyy at hh:mm.<              Enter a question mark (?) at any time for help.  9              If VMSINSTAL detects any problems during theiB              installation, it notifies you and asks if you want toB              continue the installation. In some instances, you canD              enter YES to continue. To stop the installation processA              and correct the situation, enter NO or press Return.BD              Then, correct the problem and restart the installation.  0           3. Check the status of your processes.  B              VMSINSTAL displays a list of all active processes and;              asks if you want to continue the installation:   K              %VMSINSTAL-W-ACTIVE, The following processes are still active:a!                     DECW$SERVER_0t                     _FTA8:                     _FTA11:e                     _FTA12:                         .                        .                        .  >              * Do you want to continue anyway [NO]? Y <Return>  >              You can install DEC PHIGS even if other processes<              are running. If you do not wish to continue the@              installation, press Return. If you wish to continue>              installing DEC PHIGS, enter YES and press Return.  #           4. Confirm system backup.N  N         * Are you satisfied with the backup of your system disk [YES]?<Return>  A              VMSINSTAL asks if you are satisfied with your systemM?              backup. You should always back up your system diskaD              before performing an installation. If you are satisfied?              with the backup of your system disk, press Return. =              Otherwise, enter NO and press Return to stop the B              installation. After you back up your system disk, you*              can restart the installation.    I                                                  Installing DEC PHIGS 2-5S L  X              !               5. Mount the media.P        mH                  If you omitted the device name on the VMSINSTAL command4                  line, the following prompt appears:  N              * Where will the distribution volume be mounted: DKA400: <Return>  D                  Enter the name of the distribution media device andE                  directory that contains the DEC PHIGS save sets. ForhG                  example, if the media is contained on a CD-ROM locatedlI                  on unit DKA400:, and the DEC PHIGS save sets are locatedOF                  in the directory DECPHIGS031.KIT (for the development                  kit), enter:h  )                  DKA400:[DECPHIGS031.KIT]p  G                  Depending on the type of device and whether the deviceeI                  is already mounted, the following may or may not appear:a  C                  Please mount the first volume of the set on DKA400 ,                  * Are you ready? Y <Return>  F                  If you entered the wrong device name when you invokedF                  VMSINSTAL and need to restart the installation, enterH                  NO in response to the "Are you ready?" question. If youF                  respond YES to indicate that you are ready, VMSINSTALG                  indicates that the media containing DEC PHIGS has beenrG                  mounted, and then prompts for the product name and anye.                  desired installation options:  *                  DEC PHIGS DEVELOPMENT KIT  E                  %MOUNT-I-MOUNTED, cd_name MOUNTED ON DKA400 (NODE 1):  D                   Enter the products to be processed from the first *                   distribution volume set.3                    * Products: DECPHIGS031 <Return>GP                    * Enter installation options you wish to use (none): <Return>  :                  The following products will be processed:                     DECPHIGS V3.1  J                          Beginning installation of DECPHIGS V3.1 at hh:mm.  E                  %VMSINSTAL-I-RESTORE, Restoring product saveset A...                      2-6 Installing DEC PHIGS U  t              (              DEC PHIGS RUN-TIME-ONLY KIT  C              %MOUNT-I-MOUNTED, DEC PHIGS MOUNTED ON DKA400 (NODE 1).  @               Enter the products to be processed from the first &               distribution volume set.2                * Products: DECPHIGSRTO031 <Return>L                * Enter installation options you wish to use (none): <Return>  6              The following products will be processed:                DECPHIGSRTO V3.1a  I                      Beginning installation of DECPHIGSRTO V3.1 at hh:mm.l  A              %VMSINSTAL-I-RESTORE, Restoring product saveset A...   +           6. Select a release notes option.   C              This step applies only if you specified OPTIONS N wheni'              starting the installation.   #              Release Notes Options:s  *                  1.  Display release notes(                  2.  Print release notes!                  3.  Both 1 and 2o&                  4.  None of the above  ,              * Select option [2]: 1 <Return>  C              If you select option 1, VMSINSTAL displays the releaser?              notes immediately on the console terminal. You can B              terminate the display at any time by pressing Ctrl/C.  @              If you select option 2, VMSINSTAL prompts you for aD              queue name. Either type a queue name or press Return to>              send the file to the default output print device:  /              * Queue name [SYS$PRINT]: <Return>t  C              If you select option 3, VMSINSTAL displays the releaseuC              notes on the terminal and then prompts you for a queueuA              name for the printed version. After you type a queueuA              name or press Return to send the file to the defaultIB              output print device, the release notes are copied to:  A              o  SYS$HELP:DECPHIGS031.RELEASE_NOTES (ASCII format)   A              o  SYS$HELP:DECPHIGS031_RELEASE_NOTES.PS (PostScriptT                 format)       I                                                  Installing DEC PHIGS 2-7m s  r              7                  o  SYS$HELP:DECPHIGSJ031.RELEASE_NOTESs  :                  o  SYS$HELP:DECPHIGSJ031_RELEASE_NOTES.PS  D                  If you select option 4, VMSINSTAL does not display,A                  print, or copy the release notes. This option is >                  typically used when you wish to terminate the                  installation.  G                  ________________________ Note ________________________p        tD                  This version of the release notes file installed byG                  VMSINSTAL is labeled with the current product name andpD                  version number. Be sure not to delete release notes4                  for previous versions of DEC PHIGS.G                  ______________________________________________________t  ?                  VMSINSTAL then displays the following promp t: L                  * Do you want to continue the installation [N]?: Y <Return>J                  %VMSINSTAL-I-RELMOVED, Product's release notes have been #                  moved to SYS$HELP._  B                  To continue the installation, enter YES and pressE                  Return. Otherwise, press Return. In either case, thecB                  release notes are copied to files in the SYS$HELP                  directory.n  D                  After the installation, you can enter the followingE                  command to review the release notes through the Helpr'                  facility, for example:o  4                  $ HELP PHIGS RELEASE_NOTES <Return>  /               7. Purge the old DEC PHIGS files.   ?                  * Do you want to purge files replaced by this  -                  installation [YES]? <Return>l  G                  The directories SYS$COMMON:[SYSLIB] and SYS$SYSTEM may D                  contain previous versions of DEC PHIGS files. TheseD                  files are replaced during the installation with newG                  files, but the old files are not automatically purged. C                  Purging is recommended. In response to the purging F                  prompt, press Return to purge the files or type NO to                  keep them.   H                  Appendix A lists the files on the system that are addedG                  or modified when you install the DEC PHIGS developmento/                  kit and the run-time-only kit.a           2-8 Installing DEC PHIGS                   5           8. Respond to license registration queries.   C              DEC PHIGS supports the VMS License Management Facility ?              (LMF). The installation procedure displays licenseoE              information about your product and then asks if you haverA              registered and loaded your authorization key for DEC D              PHIGS. The following is an example of this information:  &              DEC PHIGS DEVELOPMENT KIT  $                 Product:       PHIGS"                 Producer:      DEC"                 Version:       3.1*                 Release Date:  27-JAN-1994  F              * Does this product have an authorization key registered %                and loaded? Y <Return>   (              DEC PHIGS RUN-TIME-ONLY KIT  ,                 Product:       PHIGS-RUNTIME"                 Producer:      DEC"                 Version:       3.1*                 Release Date:  dd-mmm-yyyy  F              * Does this product have an authorization key registered %                and loaded? Y <Return>l  ;              Your PAK must be registered and loaded for theeA              installation to complete successfully. Therefore, ifsC              your PAK is not registered and loaded, you must answerdE              NO to this question, stop the installation, register and >              load your PAK, and then restart the installation.  E           9. Install the ACS library containing the PHIGS Ada binding $              (development kit only).  K              The DEC PHIGS Ada binding requires 20000 blocks of disk space. N              * Do you wish to install the ACS library containing the PHIGS Ada#              binding [NO]? <Return>T  ?              Press Return if you do not want to install the ACS =              library. Type YES if you want to install the ACS               library.   C           10.Install the PHIGS help library (development kit only).o  P              * Do you wish to install the help library for PHIGS [YES]? <Return>  ?              Press Return if you want to install the PHIGS help D              library. Type NO if you do not want to install the help              library.   I                                                  Installing DEC PHIGS 2-9t e  p              G               11.Install examples from PHIGS documentation (developmentn                  kit only).   E                  * Do you wish to install the examples from the PHIGS .                  documentation [YES]? <Return>  I                  Press Return if you want to install the example programsNG                  from the Getting Started with DEC PHIGS manual and the H                  DEC PHIGS Developer's Guide. Type NO if you do not wantH                  to install the programs. The DEC PHIGS example programsG                  use approximately 2200 blocks and are installed in the 2                  PHIGS$EXAMPLES:[...] directories.  7               12.Install PEXlib (development kit only).   G                  * Do you wish to have PEXlib installed [YES]? <Return>a  G                  Press Return if you want to install PEXlib. Type NO ifa3                  you do not want to install PEXlib.,  I               13.Install the PEXlib documentation (development kit only).e  @                  * Do you wish to have the PEXlib documentation *                  installed [YES]? <Return>  ?                  Press Return if you want to install the PEXlibvE                  documentation. Type NO if you do not want to installo*                  the PEXlib documentation.  :               14.Install the Japanese PHIGS-related files.  @                        This kit contains Japanese-related files.5                        They require Japanese OpenVMS.s  O                  * Do you wish to install Japanese related files [NO]? <Return>l  H                  If the Japanese version of OpenVMS is installed on yourE                  system, you will be asked if you want to install the I                  Japanese components of DEC PHIGS. Press Return if you do H                  not want to install the Japanese files. Type YES if you0                  do want to install these files.  >               15.Reboot the system after installing DEC PHIGS.  B                  If you are installing DEC PHIGS on a workstation,;                  you should reboot the system and then run  E                  SYS$TEST:PHIGS_IVP.COM to complete the installation.   L                  * Do you wish to have the system reboot following the PHIGS-                  installation [YES]? <Return>          2-10 Installing DEC PHIGSm                   C              Press Return if you want the system to reboot. Type NOS5              if you do not want to reboot the system.3  -           16.Read the informational messages.o  A              At this point, the installation procedure displays au@              number of informational messages that report on the?              progress of the installation; there are no further.>              questions. If the installation procedure has beenA              successful up to this point, VMSINSTAL moves the new C              or modified files to their target directories, updatesAE              help files, and updates DCL tables, if necessary. If you D              requested that files be purged, they are purged at this              time.  (              The messages displayed are:  '              DEC PHIGS DEVELOPMENT KIT:o  N                  STARTING to perform all the installation work. No additional <                  user actions are necessary from this point.  I                  The remaining part of the installation will take 5 - 20  /                  minutes depending on your CPU.t  C              %VMSINSTAL-I-RESTORE, Restoring product save set B ...oC              %VMSINSTAL-I-RESTORE, Restoring product save set C ... C              %VMSINSTAL-I-RESTORE, Restoring product save set D ...sC              %VMSINSTAL-I-RESTORE, Restoring product save set E ...sC              %VMSINSTAL-I-RESTORE, Restoring product save set F ...iC              %VMSINSTAL-I-RESTORE, Restoring product save set G ...l                    .                    .                    .  M              %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target t              directories..._  A                  Installation of DECPHIGS V3.1 completed at hh:mm   2                  VMSINSTAL procedure done at hh:mm  )              DEC PHIGS RUN-TIME-ONLY KIT:o  N                  STARTING to perform all the installation work. No additional <                  user actions are necessary from this point.  I                  The remaining part of the installation will take 5 - 20 h/                  minutes depending on your CPU.       I                                                 Installing DEC PHIGS 2-11m                         fG                  %VMSINSTAL-I-RESTORE, Restoring product save set B ... G                  %VMSINSTAL-I-RESTORE, Restoring product save set C ... G                  %VMSINSTAL-I-RESTORE, Restoring product save set D ...                         .                        .                        .  J                  %VMSINSTAL-I-MOVEFILES, Files will now be moved to their &                  target directories...  G                     Installation of DECPHIGSRTO V3.1 completed at hh:mmp  5                     VMSINSTAL procedure done at hh:mm   I                  The installation procedure is complete. If the procedureEH                  was successful, the DEC PHIGS files were moved to their$                  target directories.  C               17.Run the Installation Verification Procedure (IVP).   B                  After DEC PHIGS is installed, you can run the IVPG                  independently to verify that the software is availabletI                  on your system. You might also need to run the IVP after E                  a system failure to ensure that users can access DECk                  PHIGS.   3               18.Log out of the privileged account.c  "                  $ LOGOUT <Return>A                  SYSTEM     logged out at dd-mmm-yyyy hh:mm:ss.sst  D                  VMSINSTAL deletes or changes entries in the processI                  symbol tables during the installation. Therefore, if yourI                  are going to continue using the system manager's accountaF                  and you want to restore these symbols, you should log&                  out and log in again.           2.2 Error Recovery  E               If errors occur during installation, VMSINSTAL displays H               failure messages. If the installation procedure fails, one@               or more of the following messages may also appear:  K               %VMSINSTAL-E-INSFAIL, The installation of DEC PHIGS V3.1 has n               failed.   2               This kit requires OpenVMS VAX V5.5-2  I               System disk does not contain enough free blocks to install i               DECPHIGS           2-12 Installing DEC PHIGSa p  s              B           If the Installation Verification Procedure fails for any5           reason, the following message is displayed:   D           DEC PHIGS V3.1 Installation Verification Procedure failed.  F           %VMSINSTAL-E-IVPFAIL, The IVP for DEC PHIGS V3.1 has failed.  ;           If you receive this message, and all the previous C           conditions listed are correct, contact your Digital fieldO!           service representative.   @           Errors can occur during the installation if any of the%           following conditions exist:t  7           o  The operating system version is incorrect.   :           o  A prerequisite software version is incorrect.  =           o  Quotas necessary for successful installation areo              insufficient.  D           o  System parameter values for successful installation are              insufficient.  :           o  The OpenVMS help library is currently in use.  D           o  The product license has not been registered and loaded.  A           If you are notified that any of these conditions exist, A           you should take the appropriate action, as described inaD           the error message. For descriptions of the error messages,A           see the OpenVMS System Messages and Recovery ProcedurestA           Reference Manual, your processor-specific installation/D=           operations guide, or the OpenVMS License Managementy           Utility Manual.e                                  I                                                 Installing DEC PHIGS 2-13s o                         I                                                                         3 I         _________________________________________________________________   I                                                After Installing DEC PHIGSn    B               The following tasks may be performed after DEC PHIGS               installation:   2               o  Installing DEC PHIGS on a cluster  0               o  Editing the system startup file  @               o  Running the Installation Verification Procedure  /               o  Installing maintenance updates   3               o  Determining and reporting problems   G         3.1 Installing DEC PHIGS on an OpenVMS VAXcluster Configuration   A               If you want to run DEC PHIGS on multiple nodes of a H               VAXcluster configuration, first check to see that you haveH               the appropriate software license. Then, follow these steps)               after installing DEC PHIGS:i  G               1. Issue the LICENSE LOAD command to activate the license H                  on each node in the cluster on which DEC PHIGS is to beH                  executed. Issue the command as described in the OpenVMS3                  License Management Utility Manual.   F               2. Run SYS$STARTUP:PHIGS$STARTUP.COM on each node of the5                  cluster that has a software license.   G               Do not purge files during the installation. You can purgeiB               these files after you have run the DEC PHIGS startup<               command procedure on each node of the cluster.                        I                                            After Installing DEC PHIGS 3-1C G  O                    3.2 Editing the Startup File  ;           To enable the automatic startup of DEC PHIGS when-?           your system is rebooted, you must include the startup :           procedure PHIGS$STARTUP.COM in the startup file-C           SYS$MANAGER:SYSTARTUP_V5.COM under OpenVMS Version 5.5-2,l@           or SYS$MANAGER:SYSTARTUP_VMS.COM under OpenVMS VersionE           6.1. Because DEC PHIGS cannot be started before the network C           has been started, you must position this new command lineaA           after the line that invokes the network startup command D           procedure. The following example shows the network startup@           command line followed by the DEC PHIGS startup command           line:s  %           $ @SYS$MANAGER:STARTNET.COM                 .                .                .*           $ @SYS$STARTUP:PHIGS$STARTUP.COM  C           If you have a graphics peripheral set (dial box or buttone;           box) installed on your workstation, add the line:P  (           $ @SYS$STARTUP:PCM$STARTUP.COM  D           When you install DEC PHIGS on a cluster, PHIGS$STARTUP.COMB           is automatically executed for the system node from whichA           the installation was performed. You may need to executeeD           this file for other nodes in the cluster, however, to haveA           the newest DEC PHIGS images installed on those systems.PC           This is particularly true if you purged older versions ofP,           DEC PHIGS during the installation.  7     3.3 Running the Installation Verification Procedure   ?           The installation copies the Installation Verification E           Procedure (IVP) to SYS$SYSTEST. You should run this program E           after you reboot the system to complete the installation ofoE           DEC PHIGS. The IVP verifies that the installation procedure B           was successfully completed, and ensures the integrity ofB           installed files if system problems occur. To run the IVP2           separately, enter the following command:  ,           $ @SYS$TEST:PHIGS_IVP.COM <Return>                "     3-2 After Installing DEC PHIGS                   D               If the IVP runs successfully, it generates the pictureK               shown in the hardcopy documentation. If your device produces f;               color output, the image will appear in color._  *         3.4 Installing Maintenance Updates  D               Digital periodically issues maintenance updates of DECD               PHIGS, each of which contains an installation kit. YouG               should install this kit as described in the documentatione6               that accompanies the maintenance update.  E               Each time a maintenance update is released, the version I               number changes. For example, if the current version is 3.1,rG               the version number of the next maintenance update will beo               3.2.  B               Furthermore, each maintenance update includes onlineD               release notes describing the changes made to DEC PHIGSE               since the previous release. You should read the release_G               notes when you first install DEC PHIGS; however, they are H               accessible at any time after the product is installed. ForE               information on reading the release notes during the DECSF               PHIGS installation, refer to the installation procedure.E               To read the release notes after DEC PHIGS is installed,e)               display or print the files:   E               o  SYS$HELP:DECPHIGS031.RELEASE_NOTES (ASCII format) or   B               o  SYS$HELP:DECPHIGS031_RELEASE_NOTES.PS (PostScript                  format)  4               o  SYS$HELP:DECPHIGSJ031.RELEASE_NOTES  7               o  SYS$HELP:DECPHIGSJ031_RELEASE_NOTES.PSn  .         3.5 Determining and Reporting Problems  I               If you encounter a problem while using DEC PHIGS, report ittH               to Digital. Depending on the nature of the problem and theI               type of support you have, you can take one of the following                actions:  C               o  Call Digital if your software contract or warrantyn=                  agreement entitles you to telephone support.u         <               o  Submit a Software Performance Report (SPR).            I                                            After Installing DEC PHIGS 3-3i n  m              @           o  Fill out and submit a Reader's Comments form if the@              problem has to do with the DEC PHIGS documentation.B              There are Reader's Comments forms at the back of eachB              printed manual. Use the form from the manual in whichD              you found the error. Be sure to include the section and&              page number of the error.  D           Review the Software Product Description (SPD) and WarrantyE           Addendum for an explanation of warranty. If you encounter a C           problem during the warranty period, report the problem as E           described in this section, or follow alternate instructionsi>           provided by Digital for reporting SPD nonconformance           problems.f                                                                              "     3-4 After Installing DEC PHIGS p  e                    I                                                                         A I         _________________________________________________________________   I                                            Files Installed on Your Systemq    G               During installation, DEC PHIGS installs a number of files G               on your system. These files are listed in Section A.1 andT               Section A.2.  +         A.1 DEC PHIGS Development Kit Files   G               Table A-1 lists the files on the system that are added oraF               modified when you install the DEC PHIGS development kit.  I         _________________________________________________________________]C         Table A-1 Installed Files for the DEC PHIGS Development KitII         _________________________________________________________________eD         Directory        File Name                       DescriptionI         _________________________________________________________________I  D         PHIGS$EXAMPLES:[ADA]:                            Ada bindingA                                                          examplesl  #                          ADEMO1.ADAc  #                          ADEMO2.ADA   #                          ADEMO3.ADAa  #                          ADEMO4.ADA   #                          ADEMO5.ADAI  #                          SHUTLE.DATC  B         PHIGS$EXAMPLES:[BATTLEZONE]:                     DEC PHIGSH                                                          Battlezone game  B                          BATTLE.HELP                     Help file  #                          BATTLE.MMS   #                          BATTLE.OPTl  (                          BATTLE_CONFIG.H  &                          BATTLE_DEFS.HI                                                  (continued on next page)p  I                                        Files Installed on Your System A-1  3  s              E     _________________________________________________________________iG     Table A-1 (Cont.) Installed Files for the DEC PHIGS Development KitRE     _________________________________________________________________iA     Directory        File Name                       Description nE     _________________________________________________________________I%                      BATTLE_EXTERNS.H.  !                      BATTLE_GPR.Co  &                      BATTLE_GRAPHICS.C  "                      BATTLE_MAIN.C  "                      BATTLE_MOVE.C  '                      BATTLE_PARSEOPTS.C<  #                      BATTLE_PHIGS.Ca  $                      BATTLE_SCORES.C  %                      BATTLE_STRUCTS.He  %                      PHIGS_BATTLE.EXE                         VMS_UTIL.CE  C     PHIGS$EXAMPLES:[DEMO]:                           DEC PHIGS demot:                                                      files  )                      PHIGS_DEMO_BUILD.COMR  .                      PHIGS_DEMO_CHANGE_OBJECT_                      SIZE.Ct  3                      PHIGS_DEMO_CHANGE_VIEW_ANGLE.Cu  /                      PHIGS_DEMO_CREATE_OBJECT.C   /                      PHIGS_DEMO_CREATE_STRUCT.Cl  2                      PHIGS_DEMO_MOVE_VIEW_PLANES.C  '                      PHIGS_DEMO_PHIGS.C   )                      PHIGS_DEMO_PHIGS.EXE   '                      PHIGS_DEMO_PHIGS.H   E                                              (continued on next page)N    &     A-2 Files Installed on Your System h  y              I         _________________________________________________________________hC         Table A-1 Installed Files for the DEC PHIGS Development KitiI         _________________________________________________________________;D         Directory        File Name                       DescriptionI         _________________________________________________________________ .                          PHIGS_DEMO_README.TXT  G                          PHIGS_DEMO_README_JP.TXT        Japanese PHIGSbI                                                          demo informatione3                          PHIGS_DEMO_ROTATE_OBJECT.C   6                          PHIGS_DEMO_TRANSLATE_OBJECT.C                     '                          PHIGS$DEMO.ARCe  B         PHIGS$EXAMPLES:[DEVELOPERS_GUIDE]:               DEC PHIGSD                                                          Developer'sG                                                          Guide programs   '                          DG_ANNO_TEXT.CT  $                          DG_BUNDLE.C  *                          DG_CULL_DIAMOND.C  '                          DG_DEPTH_CUE.CS  (                          DG_EDIT_WHEEL.C  +                          DG_EXECUTE_STRUC.Ci  '                          DG_FILL_AREA.CM  &                          DG_FILL_ATT.C  )                          DG_FOUR_WHEELS.C,  *                          DG_GLOBAL_ROBOT.C  )                          DG_HELLO_PHIGS.C   #                          DG_HOUSE.CO  !                          DG_HSV.Ch  (                          DG_INDEX_DATA.C  %                          DG_INHERIT.CG  I                                                  (continued on next page):    I                                        Files Installed on Your System A-3o r  m              E     _________________________________________________________________rG     Table A-1 (Cont.) Installed Files for the DEC PHIGS Development KittE     _________________________________________________________________ A     Directory        File Name                       Description DE     _________________________________________________________________A#                      DG_LINE_ATTS.Ce  %                      DG_LOCAL_ROBOT.CE  $                      DG_MULT_VIEWS.C                        DG_NURBS.CT  %                      DG_PERSPECTIVE.C   $                      DG_PHIGS_DRAW.C  "                      DG_PICKPATH.C  %                      DG_QUAD_SPHERE.CF  !                      DG_REQ_LOC.C                         DG_RGB.C.  $                      DG_ROLL_WHEEL.C  "                      DG_SEE_VIEW.C  '                      DG_SHADE_DIAMOND.Co  "                      DG_SPECULAR.C  &                      DG_STRUCT_ROBOT.C                        DG_TEXT3.Cc  "                      DG_TEXT_ATT.C                        DG_WHEEL.C   D     PHIGS$EXAMPLES:[GETTING_STARTED]:                Getting StartedC                                                      with DEC PHIGSn=                                                      programs                         GS_ARCS.C  #                      GS_FILL_AREA.Ce                        GS_LIGHT.C E                                              (continued on next page)   &     A-4 Files Installed on Your System                   I         _________________________________________________________________oC         Table A-1 Installed Files for the DEC PHIGS Development KitlI         _________________________________________________________________nD         Directory        File Name                       DescriptionI         _________________________________________________________________ (                          GS_LINE_COLOR.C  (                          GS_LINE_TYPES.C  )                          GS_LINE_WIDTHS.Ce  '                          GS_NAME_SETS.Cd  #                          GS_NURBS.Cs  '                          GS_POLYLINES.C                  %                          GS_REQUEST.Ca  &                          GS_SAMPLE.FOR  $                          GS_SIMPLE.C  $                          GS_TEAPOT.C  "                          GS_TEXT.C           PHIGS$EXAMPLES:[MISC]:  .                          CREATE_PHIGS_WIDGET.C  .                          CREATE_PHIGS_WIDGET.H  .                          CREATE_PHIGS_WINDOW.C  .                          CREATE_PHIGS_WINDOW.H  B                          ESCAPE_CB.C                     C binding@                                                          program  G                          ESCAPE_DB.FOR                   PHIGS$ binding @                                                          program  H                          ESCAPE_FB.FOR                   Fortran binding@                                                          program  $                          FONTS_HEX.C  I                                                  (continued on next page)t      I                                        Files Installed on Your System A-5Q a  e              E     _________________________________________________________________SG     Table A-1 (Cont.) Installed Files for the DEC PHIGS Development KitfE     _________________________________________________________________ A     Directory        File Name                       Description eE     _________________________________________________________________ E                      JPHIGS_CHOICE_CB.C              Japanese example >                                                          files  (                      JPHIGS_CHOICE_DOL.C  )                      JPHIGS_CHOICE_FB.FORc  '                      JPHIGS_STRING_CB.Ci  (                      JPHIGS_STRING_DOL.C  )                      JPHIGS_STRING_FB.FORa  %                      JPHIGS_TEXT_CB.C   &                      JPHIGS_TEXT_DOL.C  '                      JPHIGS_TEXT_FB.FOR   $                      MOTIF_333_343.C                         MOTIF_2X3.C  #                      PHIGS_PREDEF.C_  %                      PHIGS_PREDEF.EXE_  +                      PHIGS_PREDEF_BUILD.COM                      D                      PHIGS_RINGS_3D.FOR              Sample programs  "                      PHIGS_XDEMO.C       PHIGS$EXAMPLES:[UTILS]:   @                      FORTRAN_CONVERTER.DAT           ISO Fortran<                                                      bindingC                                                      converter filec                           (                      PHIGS$CONVERTER.EXE  E                                              (continued on next page)           &     A-6 Files Installed on Your System p  n              I         _________________________________________________________________ C         Table A-1 Installed Files for the DEC PHIGS Development Kit I         _________________________________________________________________CD         Directory        File Name                       DescriptionI         _________________________________________________________________I*         SYS$COMMON:[DECW$DEFAULTS.SYSTEM]:  &                          GFX_MOTIF.UID             )                          GFX_MOTIF_EN.UIDA  )                          GFX_MOTIF_JP.UID            SYS$COMMON:[SYSFONT]:n  /                          PHIGS$MARKERS.VWS$FONT   1                          PHIGS$MARKERS.VWS$VAFONTe  "         SYS$COMMON:[SYSHLP.JA_JP]:  $                          HELPLIB.HLB           SYS$COMMON:[SYSLIB]                              C_IDL.H  7                          DECW$SVEXT_MULTI_BUFFERING.EXE   /                          DECW$SVEXT_X3D_PEX.EXEi  2                          DECW$SVEXT_X3D_PEX_GB.EXE                       /                          DECW$SVEXT_X3D_PEX_GB_r"                          UCODE.EXE  2                          DECW$SVEXT_X3D_PEX_GE.EXE  3                          DECW$SVEXT_X3D_PEX_STP.EXE   0                          DECW$SVEXT_X3D_PEX_STP_"                          UCODE.EXE  4                          DECW$SVEXT_X3D_PEX_VCFB.EXE  $                          PCM$LIB.EXE  E                          FLOATDEF.H                      PEXlib fileso    I                                                  (continued on next page)   I                                        Files Installed on Your System A-7e                   E     _________________________________________________________________ G     Table A-1 (Cont.) Installed Files for the DEC PHIGS Development Kit E     _________________________________________________________________dA     Directory        File Name                       Description ME     _________________________________________________________________S                      MPEX.Ht                        MPEXLIB.H                        MPEXOC.Hn                         MPEXPROTO.H  #                      MPEXPROTOSTR.H                         PEX.H                        PEXLIB.He                        PEXLIB.OLBo  #                      PEXLIBPROTOS.Hl                                             PEXOC.H                        PEXOCBUF.H                         PEXPROTO.HV  !                      PEXPROTOST.Hh  >                      PHIGS.H                         DEC PHIGSB                                                      include files  >                      PHIGS_DEC.H                     C bindingA                                                      include file   #                      PHIGS_DEFS.ADA   #                      PHIGS_DEFS.BAS   #                      PHIGS_DEFS.FORr                       !                      PHIGS_DEFS.H                         S#                      PHIGS_DEFS.PAS                        #                      PHIGS_DEFS.PL2   #                      PHIGS_DEFS.PLIcE                                              (continued on next page)   &     A-8 Files Installed on Your System                   I         _________________________________________________________________eC         Table A-1 Installed Files for the DEC PHIGS Development KitaI         _________________________________________________________________.D         Directory        File Name                       DescriptionI         _________________________________________________________________ 1                          PHIGS_FOR_BND_CONSTS.FORh  F                          PHIGS_ISO.H                     ISO C bindingE                                                          include fileu  '                          PHIGS_MSGS.ADA   '                          PHIGS_MSGS.BASe  '                          PHIGS_MSGS.FORe  %                          PHIGS_MSGS.HS  '                          PHIGS_MSGS.PAS   '                          PHIGS_MSGS.PL2   '                          PHIGS_MSGS.PLIe  @                          PHIGS$ARCHIVE_CONVERTER.EXE     ArchiveB                                                          converter  H                          PHIGS$CGMO_DEV_HANDLER.EXE      Device handlers  5                          PHIGS$COLSIX_DEV_HANDLER.EXEo  B                          PHIGS$CRTL.EXE                  DEC PHIGSD                                                          executables  &                          PHIGS$DBM.EXE
              E'                          PHIGS$DEFS.BAS   '                          PHIGS$DEFS.FORI  %                          PHIGS$DEFS.HS  '                          PHIGS$DEFS.PAS   '                          PHIGS$DEFS.PL2s  '                          PHIGS$DEFS.PLIm  I                                                  (continued on next page)e      I                                        Files Installed on Your System A-9a o  o              E     _________________________________________________________________tG     Table A-1 (Cont.) Installed Files for the DEC PHIGS Development KitlE     _________________________________________________________________nA     Directory        File Name                       Description  E     _________________________________________________________________ D                      PHIGS$DDIF_DEV_HANDLER.EXE      DDIF[TM] device<                                                      handler  &                      PHIGS$FOR_BND.OLB  -                      PHIGS$FOR_BND_CONSTS.FORe  %                      PHIGS$GFXRTL.EXE   /                      PHIGS$HPGL_DEV_HANDLER.EXEi  0                      PHIGS$HPPCL_DEV_HANDLER.EXE  "                      PHIGS$I3D.EXE  '                      PHIGS$ISO_CRTL.EXEe  0                      PHIGS$MOTIF_DEV_HANDLER.EXE  B                      PHIGS$MSGS.BAS                  Message files  #                      PHIGS$MSGS.FORo  !                      PHIGS$MSGS.H   #                      PHIGS$MSGS.PASt  #                      PHIGS$MSGS.PL2e  #                      PHIGS$MSGS.PLI   -                      PHIGS$PS_DEV_HANDLER.EXE-  0                      PHIGS$REGIS_DEV_HANDLER.EXE  "                      PHIGS$RTL.EXE  0                      PHIGS$SIXEL_DEV_HANDLER.EXE  .                      PHIGS$TEK_DEV_HANDLER.EXE  0                      PHIGS$TEK41_DEV_HANDLER.EXE  E                      PHIGS$TRACE.EXE                 DEC PHIGS tracera  E                                              (continued on next page)t  '     A-10 Files Installed on Your Systemn                   I         _________________________________________________________________aC         Table A-1 Installed Files for the DEC PHIGS Development Kit I         __________________________________________________________________D         Directory        File Name                       DescriptionI         __________________________________________________________________2                          PHIGS$UIS_DEV_HANDLER.EXE  '                          PHIGS$WSIM.EXEe  &                          PHIGS$WSM.EXE  D                          VAXGFX$DDIF_COLOR_TABLE.DAT     DDIF deviceF                                                          handler color>                                                          table  .                          VAXGFX$FONT_J0102.FNT  1                          VAXGFX$FONT_JISX0201.FNT   1                          VAXGFX$FONT_JISX0208.FNTD  E                          VAXGFX$FONT_NEG01.FNT           Stroke fontsU  .                          VAXGFX$FONT_NEG02.FNT  .                          VAXGFX$FONT_NEG03.FNT  .                          VAXGFX$FONT_NEG04.FNT  .                          VAXGFX$FONT_NEG05.FNT  .                          VAXGFX$FONT_NEG06.FNT  .                          VAXGFX$FONT_NEG07.FNT  .                          VAXGFX$FONT_NEG08.FNT  .                          VAXGFX$FONT_NEG09.FNT  .                          VAXGFX$FONT_NEG10.FNT  .                          VAXGFX$FONT_NEG11.FNT  .                          VAXGFX$FONT_NEG12.FNT  .                          VAXGFX$FONT_NEG13.FNT  .                          VAXGFX$FONT_NEG14.FNT    I                                                  (continued on next page)_  I                                       Files Installed on Your System A-11l a                 E     __________________________________________________________________G     Table A-1 (Cont.) Installed Files for the DEC PHIGS Development Kit E     _________________________________________________________________ A     Directory        File Name                       Description EE     _________________________________________________________________B*                      VAXGFX$FONT_NEG15.FNT  *                      VAXGFX$FONT_NEG16.FNT  *                      VAXGFX$FONT_NEG17.FNT  *                      VAXGFX$FONT_NEG18.FNT  *                      VAXGFX$FONT_NEG19.FNT  *                      VAXGFX$FONT_NEG20.FNT  *                      VAXGFX$FONT_NEG21.FNT  *                      VAXGFX$FONT_NEG22.FNT  *                      VAXGFX$FONT_NEG23.FNT  *                      VAXGFX$FONT_NEG24.FNT  
     SYS$HELP:V  .                      DECPHIGS031.RELEASE_NOTES  1                      DECPHIGS031_RELEASE_NOTES.PSA  /                      DECPHIGSJ031.RELEASE_NOTESE  2                      DECPHIGSJ031_RELEASE_NOTES.PS  +                      HELPLIB.HLB (modified)X       SYS$MESSAGE:  #                      PHIGS$MSGS.EXE   $                      VAXGFX$MSGS.EXE       SYS$MANAGER:  &                      PCM$CUSTOM_SS.DAT  (                      PCM$STANDARD_SS.DAT    E                                              (continued on next page)   '     A-12 Files Installed on Your Systemn i                 I         _________________________________________________________________tC         Table A-1 Installed Files for the DEC PHIGS Development Kit_I         _________________________________________________________________ D         Directory        File Name                       DescriptionI         _________________________________________________________________          SYS$STARTUP:  *                          PHIGS$STARTUP.COM  (                          PCM$STARTUP.COM           SYS$SYSTEM:N  '                          PCM$SERVER.EXE 	                    SYS$TEST:R  &                          PHIGS_IVP.COM  &                          PHIGS_IVP.EXEI         _________________________________________________________________   -         A.2 DEC PHIGS Run-Time-Only Kit Fileso  G               Table A-2 lists the files on the system that are added or H               modified when you install the DEC PHIGS run-time-only kit.  I         _________________________________________________________________ E         Table A-2 Installed Files for the DEC PHIGS Run-Time-Only Kit I         _________________________________________________________________ E         Directory        File Name                       Description TI         _________________________________________________________________ *         SYS$COMMON:[DECW$DEFAULTS.SYSTEM]:  &                          GFX_MOTIF.UID  )                          GFX_MOTIF_EN.UIDI  )                          GFX_MOTIF_JP.UID            SYS$HELP:   2                          DECPHIGS031.RELEASE_NOTES  5                          DECPHIGS031_RELEASE_NOTES.PS   3                          DECPHIGSJ031.RELEASE_NOTES_  6                          DECPHIGSJ031_RELEASE_NOTES.PS    I                                                  (continued on next page)_  I                                       Files Installed on Your System A-13     s              E     _________________________________________________________________ I     Table A-2 (Cont.) Installed Files for the DEC PHIGS Run-Time-Only KitEE     _________________________________________________________________BA     Directory        File Name                       Description  E     _________________________________________________________________      SYS$COMMON:[SYSHLP.JA_JP]:                         HELPLIB.HLB                        G     SYS$COMMON:[SYSLIB]:  3                      DECW$SVEXT_MULTI_BUFFERING.EXEC  +                      DECW$SVEXT_X3D_PEX.EXE   .                      DECW$SVEXT_X3D_PEX_GB.EXE  +                      DECW$SVEXT_X3D_PEX_GB_                       UCODE.EXE  .                      DECW$SVEXT_X3D_PEX_GE.EXE  /                      DECW$SVEXT_X3D_PEX_STP.EXE   ,                      DECW$SVEXT_X3D_PEX_STP_                      UCODE.EXE  0                      DECW$SVEXT_X3D_PEX_VCFB.EXE                         PCM$LIB.EXE  <                      PHIGS$ARCHIVE_CONVERTER.EXE     Archive>                                                      converter  D                      PHIGS$CGMO_DEV_HANDLER.EXE      Device handlers  1                      PHIGS$COLSIX_DEV_HANDLER.EXE_  >                      PHIGS$CRTL.EXE                  DEC PHIGS@                                                      executables  "                      PHIGS$DBM.EXE  @                      PHIGS$DDIF_DEV_HANDLER.EXE      DDIF device<                                                      handler  &                      PHIGS$FOR_BND.OLB  %                      PHIGS$GFXRTL.EXEI  I                                                  (continued on next page)   '     A-14 Files Installed on Your System     G              I         _________________________________________________________________YM         Table A-2 (Cont.) Installed Files for the DEC PHIGS Run-Time-Only Kit I         _________________________________________________________________ E         Directory        File Name                       Description  I         _________________________________________________________________I3                          PHIGS$HPGL_DEV_HANDLER.EXET  4                          PHIGS$HPPCL_DEV_HANDLER.EXE  &                          PHIGS$I3D.EXE  +                          PHIGS$ISO_CRTL.EXE   4                          PHIGS$MOTIF_DEV_HANDLER.EXE  1                          PHIGS$PS_DEV_HANDLER.EXE   4                          PHIGS$REGIS_DEV_HANDLER.EXE  &                          PHIGS$RTL.EXE  4                          PHIGS$SIXEL_DEV_HANDLER.EXE  2                          PHIGS$TEK_DEV_HANDLER.EXE  4                          PHIGS$TEK41_DEV_HANDLER.EXE  I                          PHIGS$TRACE.EXE                 DEC PHIGS tracer                        2                          PHIGS$UIS_DEV_HANDLER.EXE  '                          PHIGS$WSIM.EXE   &                          PHIGS$WSM.EXE  D                          VAXGFX$DDIF_COLOR_TABLE.DAT     DDIF deviceF                                                          handler color>                                                          table  .                          VAXGFX$FONT_J0102.FNT  1                          VAXGFX$FONT_JISX0201.FNT_  1                          VAXGFX$FONT_JISX0208.FNTJ  E                          VAXGFX$FONT_NEG01.FNT           Stroke fonts   .                          VAXGFX$FONT_NEG02.FNTI                                                  (continued on next page)O      I                                       Files Installed on Your System A-15I D  C              E     _________________________________________________________________.I     Table A-2 (Cont.) Installed Files for the DEC PHIGS Run-Time-Only Kit_E     _________________________________________________________________ A     Directory        File Name                       Description  E     _________________________________________________________________L*                      VAXGFX$FONT_NEG03.FNT  *                      VAXGFX$FONT_NEG04.FNT  *                      VAXGFX$FONT_NEG05.FNT  *                      VAXGFX$FONT_NEG06.FNT  *                      VAXGFX$FONT_NEG07.FNT  *                      VAXGFX$FONT_NEG08.FNT  *                      VAXGFX$FONT_NEG09.FNT  *                      VAXGFX$FONT_NEG10.FNT  *                      VAXGFX$FONT_NEG11.FNT  *                      VAXGFX$FONT_NEG12.FNT  *                      VAXGFX$FONT_NEG13.FNT  *                      VAXGFX$FONT_NEG14.FNT  *                      VAXGFX$FONT_NEG15.FNT  *                      VAXGFX$FONT_NEG16.FNT  *                      VAXGFX$FONT_NEG17.FNT  *                      VAXGFX$FONT_NEG18.FNT  *                      VAXGFX$FONT_NEG19.FNT  *                      VAXGFX$FONT_NEG20.FNT  *                      VAXGFX$FONT_NEG21.FNT  *                      VAXGFX$FONT_NEG22.FNT  *                      VAXGFX$FONT_NEG23.FNT  *                      VAXGFX$FONT_NEG24.FNT  I                                                  (continued on next page)F    '     A-16 Files Installed on Your SystemF .                 I         _________________________________________________________________ M         Table A-2 (Cont.) Installed Files for the DEC PHIGS Run-Time-Only KitPI         _________________________________________________________________LE         Directory        File Name                       Description CI         _________________________________________________________________.         SYS$FONT:   /                          PHIGS$MARKERS.VWS$FONT   0                          PHIGS$MARKER.VWS$VAFONT             SYS$MANAGER:  *                          PCM$CUSTOM_SS.DAT  ,                          PCM$STANDARD_SS.DAT           SYS$MESSAGE:  '                          PHIGS$MSGS.EXE$  (                          VAXGFX$MSGS.EXE           SYS$STARTUP:  *                          PHIGS$STARTUP.COM  (                          PCM$STARTUP.COM           SYS$SYSTEM:O  '                          PCM$SERVER.EXE            SYS$TEST:   &                          PHIGS_IVP.COM  &                          PHIGS_IVP.EXEI         _________________________________________________________________                         I                                       Files Installed on Your System A-17e i                I                                                                         B_I         _________________________________________________________________r  I                                                      Sample Installations_    @               This appendix provides sample installations of the1               development and run-time-only kits.   2         B.1 DEC PHIGS Development Kit Installation  D               This section contains a sample installation of the DEC$               PHIGS development kit.  :         $ @VMSINSTAL DECPHIGS031 DKA400 options N <Return>  H                 OpenVMS VAX Software Product Installation Procedure V6.1  #         It is 12-APR-1995 at 13:56.   7         Enter a question mark (?) at any time for help. E         VMSINSTAL-W-ACTIVE, The following processes are still active:                 DECW$SERVER_0                _FTA8:H                _FTA11:                _FTA12:                _FTA13:                _FTA14:9         * Do you want to continue anyway [NO]? Y <Return> O         * Are you satisfied with the backup of your system disk [YES]? <Return>   1         The following products will be processed:              DECPHIGS V3.1   @                 Beginning installation of DECPHIGS V3.1 at 13:56  >         %VMSINSTAL-I-RESTORE, Restoring product save set A ...              Release Notes Options:    %             1.  Display release notes #             2.  Print release notes              3.  Both 1 and 2!             4.  None of the above_  %         * Select option [2]: <Return>t          I                                                  Sample Installations B-1_ _  _            &     * Queue name [sys$print]: <Return>?     * Do you want to continue the installation [NO]? Y <Return>_  O     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.PL     Copyright Digital Equipment Corporation 1988, 1995. All rights reserved.  M     Restricted Rights: Use, duplication, or disclosure by the U.S. GovernmentcI     is subject to restrictions as set forth in subparagraph (c)(1)(ii) of J     DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III,     as applicable.  L     This software is proprietary to and embodies the confidential technologyI     of Digital Equipment Corporation. Possession, use, or copying of this M     software and media is authorized only pursuant to a valid written license .     from Digital or an authorized sublicensor.  N     * Do you want to purge files replaced by this installation [YES]? <Return>               Product:      PHIGS_             Producer:     DEC              Version:      3.1 %             Release Date: 27-JAN-1994   A     * Does this product have an authorization key registered and       loaded? Y <Return>  B     The DEC PHIGS Ada binding requires 20000 blocks of disk space.  F     * Do you wish to install the ACS library containing the PHIGS Ada      binding [NO]?  Y <Return>D  G     * Do you wish to install the help library for PHIGS [YES]? <Return>   9     * Do you wish to install the examples from the PHIGS  !     documentation [YES]? <Return>e  :     * Do you wish to have PEXlib installed [YES]? <Return>  L     * Do you wish to have the PEXlib documentation installed [YES]? <Return>  5             This kit contains Japanese-related files. *             They require Japanese OpenVMS.  B     * Do you wish to install Japanese related files [NO]? <Return>  K         If you are installing DEC PHIGS on a workstation, you should reboot F         the system and then run SYS$TEST:PHIGS_IVP.COM to complete the         installation.S  @     * Do you wish to have the system reboot following the PHIGS       installation [YES]? <Return>         B-2 Sample Installations B  O              J             STARTING to perform all the installation work.  No additional 7             user actions are necessary from this point.   K             The remaining part of the installation will take 5 - 20 minutesS"             depending on your CPU.  >         %VMSINSTAL-I-RESTORE, Restoring product save set B ...>         %VMSINSTAL-I-RESTORE, Restoring product save set C ...>         %VMSINSTAL-I-RESTORE, Restoring product save set D ...>         %VMSINSTAL-I-RESTORE, Restoring product save set E ...>         %VMSINSTAL-I-RESTORE, Restoring product save set F ...>         %VMSINSTAL-I-RESTORE, Restoring product save set G ...  K             WARNING:  In order to update the DEC PHIGS Ada binding, all theIL             files from the DEC PHIGS Ada ACS library in the system directoryK             [SYSLIB.PHIGS_ADA] will be deleted and replaced with files fromN             this kit.   L         The server extensions on your system are newer than the ones in this:         kit.  The server extensions will not be installed.  2         The PEX server microcode has been updated.  8             PEXLIB_V5.PS has been installed in SYS$HELP:             System Manager:   C             Upon completion of this installation, please be sure to_D             edit the system startup file and add the following line:  /                $ @SYS$STARTUP:PHIGS$STARTUP.COM   K             If you have a button or dial box connected to your workstation,_H             edit the system file SYS$STARTUP:VMS$LPBEGIN-050_STARTUP.COMJ             (refer to the release notes for details) and add the following             line:   -                $ @SYS$STARTUP:PCM$STARTUP.COM   J             A copy of the Installation Verification Procedure has been put&             in SYS$TEST:PHIGS_IVP.COM.  I             If you are installing DEC PHIGS on a 3D workstation and use a K             PEX workstation type, you need to restart the DECwindows server$;             after the installation with the following line:G  6                $ @SYS$STARTUP:DECW$STARTUP.COM RESTART  K             PHIGS demo programs, along with their sources have been put in:       I                                                  Sample Installations B-3T G  F              <             PHIGS$EXAMPLES:[DEMO] - PHIGS_DEMO_PHIGS example  K             PHIGS$EXAMPLES:[DEVELOPERS_GUIDE] - Examples from the DEC PHIGS 5                                     Developer's Guide   J             PHIGS$EXAMPLES:[GETTING_STARTED] - Examples from the "Getting B                                     Started with DEC PHIGS" manual  A             PHIGS$EXAMPLES:[MISC] - Assorted other PHIGS examples   >             PHIGS$EXAMPLES:[ADA] - Assorted PHIGS Ada examples  8             PHIGS$EXAMPLES:[UTILS] - Assorted utilities.  M             To complete the installation of the DEC PHIGS Ada binding, please )             issue the following commands:_  ;             $ ACS SET LIBRARY SYS$COMMON:[SYSLIB.PHIGS_ADA] )             $ ACS ENTER FOREIGN/REPLACE -_E                  SYS$COMMON:[SYSLIB.PHIGS_ADA]PHIGS$ADA.OLB/LIBRARY -e"                  PHIGS_INTERNALS_C  H         %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target          directories...<             Installation of DECPHIGS V3.1 completed at 14:30  -             VMSINSTAL procedure done at 14:30X                                                            B-4 Sample Installations V  F              4         B.2 DEC PHIGS Run-Time-Only Kit Installation  C              This section contains a sample installation of the DEC$$               PHIGS development kit.  2         $ @vmsinstal DECPHIGSRTO031 DKA400<Return>  H                 OpenVMS VAX Software Product Installation Procedure V6.1  #         It is 12-APR-1995 at 13:51.0  7         Enter a question mark (?) at any time for help.EE         VMSINSTAL-W-ACTIVE, The following processes are still active:                 DECW$SERVER_0                _FTA8:$                _FTA11:                _FTA12:                _FTA13:                _FTA14:9         * Do you want to continue anyway [NO]? Y <Return> O         * Are you satisfied with the backup of your system disk [YES]? <Return>   1         The following products will be processed:s             DECPHIGSRTO V3.1  C                 Beginning installation of DECPHIGSRTO V3.1 at 13:52_  >         %VMSINSTAL-I-RESTORE, Restoring product save set A ...J         %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to          SYS$HELP._P         Copyright Digital Equipment Corporation 1988, 1995. All rights reserved.  G         Restricted Rights: Use, duplication, or disclosure by the U.S.  N         Government is subject to restrictions as set forth in subparagraph (c)B         (1)(ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in .         FAR 52.227-14 Alt. III, as applicable.  P         This software is proprietary to and embodies the confidential technologyM         of Digital Equipment Corporation. Possession, use, or copying of this_J         software and media is authorized only pursuant to a valid written :         license from Digital or an authorized sublicensor.  6         * Do you want to purge files replaced by this $         installation [YES]? <Return>  +                 Product:      PHIGS-RUNTIME !                 Producer:     DEC !                 Version:      3.1 )                 Release Date: 27-JAN-1994_      I                                                  Sample Installations B-5                    A     * Does this product have an authorization key registered and _     loaded? Y <Return>  5             This kit contains Japanese-related files.G*             They require Japanese OpenVMS.  B     * Do you wish to install Japanese related files [NO]? <Return>  I             If you are installing DEC PHIGS on a workstation, you should  E             reboot the system and then run SYS$TEST:PHIGS_IVP.COM to  &             complete the installation.  @     * Do you wish to have the system reboot following the PHIGS       installation [YES]? <Return>  N             STARTING to perform all the installation work.  No additional user2             actions are necessary from this point.  K             The remaining part of the installation will take 5 - 20 minutes "             depending on your CPU.  :     %VMSINSTAL-I-RESTORE, Restoring product save set B ...:     %VMSINSTAL-I-RESTORE, Restoring product save set C ...:     %VMSINSTAL-I-RESTORE, Restoring product save set D ...  H     The server extensions on your system are newer than the ones in this6     kit.  The server extensions will not be installed.  .     The PEX server microcode has been updated.         System Manager:X  C             Upon completion of this installation, please be sure to D             edit the system startup file and add the following line:  /                $ @SYS$STARTUP:PHIGS$STARTUP.COMO  K             If you have a button or dial box connected to your workstation, H             edit the system file SYS$STARTUP:VMS$LPBEGIN-050_STARTUP.COMP             (refer to the release notes for details) and add the following line:  -                $ @SYS$STARTUP:PCM$STARTUP.COM   L             A copy of the Installation Verification Procedure will be put inE             SYS$TEST:PHIGS_IVP.EXE along with SYS$TEST:PHIGS_IVP.COM.M                     B-6 Sample Installations            I             If you are installing DEC PHIGS on a 3D workstation and use a K             PEX workstation type, you need to restart the DECwindows servere;             after the installation with the following line:   6                $ @SYS$STARTUP:DECW$STARTUP.COM RESTART  H         %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target          directories...C                 Installation of DECPHIGSRTO V3.1 completed at 13:56   1                 VMSINSTAL procedure done at 13:56                                                                                         I                                                  Sample Installations B-7. n