                                     C                      Compaq_DECprint_Supervisor_(DCPS)_for_OpenVMS_ 0                      Software Installation Guide  .                      Order Number: AA-PSVDF-TE                          June 2001  E                      This guide describes how to install the DECprint 5                      Supervisor for OpenVMS software.             G                      Revision/Update Information: This guide supersedes >                                                   AA-PSVDE-TE.  @                      Operating System & Versions: OpenVMS Alpha,D                                                   Version 6.2, 7.2-18                                                   or 7.3F                                                   OpenVMS VAX, VersionC                                                   5.5-2, 7.2 or 7.3   A                      Software Version:            Compaq DECprint C                                                   Supervisor (DCPS) F                                                   for OpenVMS, Version5                                                   2.0   0                      Compaq Computer Corporation#                      Houston, Texas                  E            __________________________________________________________   -             2001 Compaq Computer Corporation   B            Compaq, VAX, VMS and the Compaq logo Registered in U.S.>            Patent and Trademark Office. DECnet and OpenVMS areD            trademarks of Compaq Information Technologies Group, L.P.4            in the United States and other countries.  <            Microsoft and Windows are trademarks of Microsoft@            Corporation in the United States and other countries.  E            All other product names mentioned herein may be trademarks B            or registered trademarks of their respective companies.  D            Confidential computer software. Valid license from Compaq?            required for possession, use, or copying. Consistent D            with FAR 12.211 and 12.212, Commercial Computer Software,B            Computer Software Documentation, and Technical Data forE            Commercial Items are licensed to the U.S. Government under 0            vendor's standard commercial license.  @            Compaq shall not be liable for technical or editorial@            errors or omissions contained herein. The information@            in this document is provided "as is" without warranty?            of any kind and is subject to change without notice. >            The warranties for Compaq products are set forth in?            the express limited warranty statements accompanying ?            such products. Nothing herein should be construed as /            constituting an additional warranty.   D            The DECprint Supervisor documentation set is available on            CD-ROM.  E            This document was prepared using DECdocument, Version 3.3.                                C    ________________________________________________________________   C                                                            Contents     C    Preface..................................................      v     $    1  Before Installing the Software  C          1.1   Checking the Disk Space......................    1-1 C          1.2   Related Software.............................    1-2 C          1.2.1     DEC C Run-Time Library...................    1-2 C          1.2.2     PrintServer Software.....................    1-2 C          1.2.3     TCP/IP Networks..........................    1-3 C          1.2.4     AppleTalk Networks.......................    1-3 C          1.2.5     DDIF Printing............................    1-3 C          1.2.6     DEC Image Print-PLUS (ICPS)..............    1-3 :          1.3   Ensuring that All Executable Components AreC                Compatible ..................................    1-3       2  Installing the Software   C          2.1   Overview.....................................    2-1 C          2.2   VMSINSTAL Conventions........................    2-2 C          2.3   Installing the Software......................    2-2   "    A  Sample Installation Sessions      B  System Messages   C          B.1   System Message Overview......................    B-1 C          B.1.1     Message Format...........................    B-1 C          B.1.2     Severity Level...........................    B-2 C          B.2   DCPS Installation Messages...................    B-2         C                                                                 iii                  )      C  Ordering Additional Documentation     
      Index    
      Examples   <            A-1       Sample Installation on an OpenVMS AlphaE                      System...................................    A-1   5            A-2       Sample Upgrade on an OpenVMS VAX E                      System...................................    A-5         Tables   E            1-1       Disk Space Requirements..................    1-1                                                               iv                            H         ________________________________________________________________  H                                                                  Preface               Intended Audience   @               This manual is for system managers responsible forC               installing the DECprint Supervisor (DCPS) for OpenVMS H               printing software. To install the printing software, it is5               necessary to have some experience with:   C               o  OpenVMS DCL command language and system management                   procedures   G               o  Procedures and commands in the DECprint Supervisor for /                  OpenVMS System Manager's Guide   B               o  VMSINSTAL utility for installing OpenVMS software  B               If your printing environment utilizes the network toH               communicate with printers, you must have some knowledge of'               network management tools.   H               The DECprint Supervisor for OpenVMS System Manager's GuideH               contains information about postinstallation tasks, such asH               creating queues and customizing your printing environment.                        H                                                                        v                       Conventions  =            The following conventions are used throughout this             document:  E            __________________________________________________________ E            Convention__Meaning_______________________________________   B            UPPERCASE   Uppercase characters indicate DCL commands,2                        qualifiers, and parameters.  E            italics     Italic characters are used in command examples D                        to indicate that you are to substitute a word/                        or value of your choice.   C            bold        Bold characters are used in examples to show C                        the characters that you should enter as part (                        of the procedure.  B            []          Brackets indicate that the enclosed item is                         optional.  D            Ctrl/x      This symbol indicates a control key sequence.;                        Press the key labeled Ctrl while you D                        simultaneously press another key, represented                        by x.  B            <Return>    This symbol indicates that you should pressE            ____________the_Return_key._______________________________                                       vi                        H                                                                        1H         ________________________________________________________________  H                                           Before Installing the Software      C               DECprint Supervisor runs on OpenVMS Alpha and OpenVMS B               VAX systems. The files that are installed on the twoC               systems differ. See the Release Notes for a full list                of the files.   F                 ________________________Note  ________________________  C                 Starting with DCPS V2.0, the need for DCPS-OPEN and A                 DCPS-PLUS licenses has been eliminated. The right D                 to use all features of DCPS is now included with the1                 OpenVMS operating system license.   E                 _____________________________________________________   #         1.1 Checking the Disk Space   F               Depending on whether DECprint Supervisor is installed onD               an Alpha or VAX processor, disk space requirements may@               vary. Table 1-1 lists the disk space requirements.  H               Table_1-1_Disk_Space_Requirements_________________________  )               Disk space required   Alpha H               for_._._._____________system______VAX_system______________  ;               Installation          7400        5900 blocks *                                     blocks  ;               Permanent use         6900        5500 blocks H               ______________________blocks______________________________  @               These disk space requirements are approximate, andC               depend on your system environment, disk cluster size, 1               configuration and software options.   H                                       Before Installing the Software 1-1                       1.2 Related Software   B            DECprint Supervisor works with other software to create@            a fully functional printing system. Before installingC            DECprint Supervisor, make sure the other application and +            printing software is compatible.   E            The following sections detail the software you need. Refer B            to the DECprint Supervisor for OpenVMS Software Product?            Description (SPD) for specific version requirements.   !      1.2.1 DEC C Run-Time Library   E            DCPS requires that the DEC C run-time library is installed D            on your system. This library is included with the OpenVMSB            operating system starting with OpenVMS V6.1, and in theC            DEC C/C++ Run-Time Components kit. To run on OpenVMS VAX E            V5.5-2 and V6.0 systems, the DEC C/C++ Run-Time Components 8            kit must be installed before installing DCPS.  <            To determine if the DEC C run-time library exists>            on your system, check for the existence of the fileD            SYS$STARTUP:CRT$STARTUP.COM. If this file exists, the DECD            C/C++ Run-Time Components kit has already been installed.B            If it does not, you must install the DEC C/C++ Run-TimeC            Components kit before installing DECprint Supervisor for             OpenVMS.   C            The DEC C/C++ Run-Time Components kit is included on the @            DCPS CD-ROM starting with V1.6, and is also available=            on the OpenVMS VAX Software Product Library CD-ROM ?            distributed by Compaq. Please refer to the DEC C/C++ B            Run-Time Components documentation for information aboutC            installing the kit, starting with Read Before Installing A            or Using DEC C/C++ Run-Time Components Version 6.0 for             OpenVMS VAX Systems.         1.2.2 PrintServer Software   B            To print to a DIGITAL PrintServer printer, the printingD            environment must contain a supporting host system running,            the PrintServer software product.      '      1-2 Before Installing the Software                           1.2.3 TCP/IP Networks   E               TCP/IP connections to PrintServer printers using Common F               Printer Access Protocol (CPAP), and connections to otherH               printers using the raw TCP/IP socket protocol, require one               of the following:   3               o  Compaq TCP/IP Services for OpenVMS   6               o  Process Software MultiNet for OpenVMS  5               o  Process Software TCPware for OpenVMS             1.2.4 AppleTalk Networks  F               Printers connected to AppleTalk networks can be accessedB               by the DECprint Supervisor for OpenVMS software, andF               thus be made available to OpenVMS system users as sharedB               network printers. This printing system configurationB               requires PATHWORKS for OpenVMS (Macintosh) software.           1.2.5 DDIF Printing   F               To print DDIF encoded bitonal images, DCPS requires thatF               either DECwindows or DECimage Application Services (DAS)C               be installed on your system. DAS is only available on "               OpenVMS VAX systems.  )         1.2.6 DEC Image Print-PLUS (ICPS)   C               DCPS V1.1 and later versions cannot coexist with ICPS ?               V1.x software. Installing DCPS replaces the image C               SYS$LIBRARY:TRN$DDIF_IMAGE.EXE. This new image is not 0               compatible with the ICPS software.  B         1.3 Ensuring that All Executable Components Are Compatible  C               All DCPS executable components attempt to ensure they D               are a matched set. If a mis-match occurs, DCPS reportsD               an error when the queue starts. This error occurs whenD               a component of a prior (incompatible) software versionB               exists in the SYS$SPECIFIC area and newer componentsB               are installed in the SYS$COMMON area. The error thatF               occurs depends on which versions of which components are%               executing. For example:   H                                       Before Installing the Software 1-3                 D            o  If the executing version of DCPS$SMB.EXE is V1.1A, andA               all other components are from Version 1.2, then the E               following error occurs on an OpenVMS VAX V5.5-2 system:   "               $ start/que atk_1152F               %%%%%%%%%%%  OPCOM  13-FEB-1995 21:38:08.66  %%%%%%%%%%%6               Message from user QUEUE_MANAGE on DAHLIAE               %QMAN-E-SYMDEL, unexpected symbiont process termination   F               %%%%%%%%%%%  OPCOM  13-FEB-1995 21:38:08.67  %%%%%%%%%%%6               Message from user QUEUE_MANAGE on DAHLIAA               -SYSTEM-F-ACCVIO, access violation, reason mask=00, A               virtual address=00000000, PC=0001A9B8, PSL=03C00000   C            o  If the executing version of DCPS$SMBSHR.EXE is V1.1A, E               and all other components are from Version 1.2, then the >               following error occurs on an OpenVMS VAX system:  F               %%%%%%%%%%%  OPCOM  13-FEB-1995 21:44:42.40  %%%%%%%%%%%0               Message from user SYSTEM on DAHLIAD               Process SYMBIONT_98: %SMBSHRMISMTCH2, Wrong version of               DCPS$SMBSHR.EXE   F               %%%%%%%%%%%  OPCOM  13-FEB-1995 21:44:42.51  %%%%%%%%%%%6               Message from user QUEUE_MANAGE on DAHLIAE               %QMAN-E-SYMDEL, unexpected symbiont process termination   F               %%%%%%%%%%%  OPCOM  13-FEB-1995 21:44:42.52  %%%%%%%%%%%6               Message from user QUEUE_MANAGE on DAHLIA6               -NONAME-F-NOMSG, Message number 064BE124  C            o  If the executing version of DCPS$SMBSHR.EXE is V1.1A, E               and all other components are from Version 1.2, then the @               following error occurs on an OpenVMS Alpha system:  F               %%%%%%%%%%%  OPCOM   1-FEB-1995 12:20:35.02  %%%%%%%%%%%6               Message from user QUEUE_MANAGE on DNGBATE               %QMAN-E-SYMDEL, unexpected symbiont process termination   F               %%%%%%%%%%%  OPCOM   1-FEB-1995 12:20:35.03  %%%%%%%%%%%6               Message from user QUEUE_MANAGE on DNGBATH               -IMGACT-F-SYMVECMIS, shareable image's symbol vector table               mismatch    '      1-4 Before Installing the Software                        H                                                                        2H         ________________________________________________________________  H                                                  Installing the Software      G               This chapter describes how to install DECprint Supervisor_B               software using the VMSINSTAL utility. If you are notG               familiar with the VMSINSTAL utility, refer to the OpenVMS .               Upgrade and Installation Manual.           2.1 Overview  C               Follow these steps to install the DECprint Supervisoro*               (DCPS) for OpenVMS software:  *               1. Review all release notes.  C               2. Stop each DCPS queue using STOP/QUEUE/NEXT or STOPPB                  /QUEUE/RESET if you have existing DCPS queues and?                  do not want the DCPS installation procedure tooF                  automatically stop them, or you have DCPS executablesG                  in the SYS$SPECIFIC system areas, or you need to apply ;                  OpenVMS or other patches that impact DCPS.   B               3. Remove any DCPS executables from the SYS$SPECIFIC                  system areas.  A               4. Apply OpenVMS or other patches that impact DCPS, C                  as determined from the DCPS release notes or other E                  sources. If the patches require that you reboot yourC:                  system, do so after applying the patches.                 5. Install DCPS.  G               6. Create or update DCPS$STARTUP.COM, as described in theCH                  DECprint Supervisor for OpenVMS System Manager's Guide.G                  For example, add queue definitions to the file and setVH                  the value of the DCPS$MAX_STREAMS logical following the4                  examples provided in the procedure.  H                                              Installing the Software 2-1 C  o            H            7. Start your DCPS print queues by invoking DCPS$STARTUP.COM.@               The DCPS installation procedure may have restarted@               DCPS queues that it stopped, if you chose to allowB               it to do so. If you changed your DCPS environment orD               DCPS$STARTUP.COM after the DCPS installation procedure?               automatically restarted some queues, you may needoB               to stop all DCPS queues and restart them before your'               changes will take effect.           2.2 VMSINSTAL Conventions  C            VMSINSTAL will prompt you for site-specific information.i?            Questions are preceded by an asterisk (*) and may be.C            followed by default responses enclosed in brackets ([]).h4            Enter your response followed by <Return>.  ?            Press <Return> to enter the default response. If youu>            are not sure of the response, enter a question markC            (?). VMSINSTAL displays explanatory text and repeats thel            prompt.  C            VMSINSTAL messages are documented in the OpenVMS Upgrader<            and Installation Manual. Messages specific to theE            installation of DECprint Supervisor software are listed ini            Appendix B.         2.3 Installing the Software  C               ________________________Note ________________________   A               This section does not reproduce all of the text you.?               may see on your screen during the installation of1@               the DECprint Supervisor software. Sample VMSINSTAL;               installation scripts are shown in Appendix A.d  C               _____________________________________________________C  @            To install the software, use the following procedure:  -            1. Invoke the VMSINSTAL procedure.   *               Enter the following command:  F               $ @SYS$UPDATE:VMSINSTAL DCPSpppnnn device-id [OPTIONS N]         2-2 Installing the Software I  r            6                  You supply the following information:  D                  o  DCPSpppnnn is the save set name, with ppp desig-D                     nating the platform (AXP (Alpha) or VAX) and nnnH                     designating the version (for example, 020 for V2.0).  D                  o  device-id is the name of the device on which you;                     want to mount the media, such as MUA0:.   B                  o  OPTIONS N allows you to request release notes.B                     If you do not include the OPTIONS N parameter,G                     VMSINSTAL does not ask you about the release notes. G                     Review the release notes before proceeding with the H                     installation. If you are restarting the installationG                     and have already reviewed the release notes, you do 2                     not need to specify OPTIONS N.  F                  First, VMSINSTAL displays a banner line with the dateC                  and time, and instructions for running the dialog.tE                  You may receive one or more of the following warning.A                  messages when VMSINSTAL starts up. Exit from the E                  procedure, correct the cause of the warning message,.9                  and start the VMSINSTAL procedure again.D  D                  o  If you are not currently logged in to the SYSTEM@                     account, the following message is displayed:  X                     %VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account.  H                  o  If processes are running while VMSINSTAL is running,7                     the following message is displayed:r  R                     %VMSINSTAL-W-ACTIVE, The following processes are still active:(                             process-name  C                  Other processes may cause the installation of HELPrC                  to fail. When any of these messages are displayed,aD                  the following question is displayed to allow you to?                  terminate VMSINSTAL and correct the situation:   7                  * Do you want to continue anyway [NO]?   G                  Enter YES to continue. If you answer NO, the VMSINSTAL 5                  procedure is terminated immediately.   H                                              Installing the Software 2-3                 ?               You can enter a question mark (?) at this time too=               display advice from the VMSINSTAL software. Fora               example:  N               The above conditions may cause VMSINSTAL to function improperly.R               In particular, problems may occur with file ownership if you are not-               logged into the SYSTEM account.   5            2. Ensure that existing software is saved.e  9               VMSINSTAL then asks the following question:_  L               * Are you satisfied with the backup of your system disk [YES]?  E               Enter YES to continue, or enter NO to exit VMSINSTAL to 4               make a backup and run VMSINSTAL again.  B               If you enter a question mark (?) in response to thisE               question, VMSINSTAL displays the following explanation:t  O               VMSINSTAL attempts to ensure that a power failure or system crashuQ               will not corrupt your system disk.  However, for absolute safety we S               recommend that you back it up before installing new products.  Please J               see the documentation for more information on crashes during               installation.   8            3. Confirm that distribution media is loaded.  C               VMSINSTAL asks for confirmation that the distributiony%               media has been mounted.   E                Please mount the first volume of the set on device-id:                * Are you ready?  0            4. Announce products to be installed.  C               VMSINSTAL then announces the products to be installed B               where ppp designates the platform and n.n designates               the version.  7               The following products will be processed:_                 DCPSppp Vn.n  E                       Beginning installation of DCPSppp Vn.n at 13:45e  ?               %VMSINSTAL-I-RESTORE, Restoring product saveset Ao  '            5. Obtain the release notes.          2-4 Installing the Software    t            D                  If you specified OPTIONS N in the VMSINSTAL command>                  line, the following Release Notes options are                  displayed:_  T                  Release notes included with this kit are always copied to SYS$HELP.  2                  Additional Release Notes Options:  *                     Release Notes Options:4                            (1) Display release notes2                            (2) Print release notes+                            (3) Both 1 and 2_0                            (4) None of the above  C                  After you enter the release note option, VMSINSTAL C                  asks whether you want to continue the installationm                  procedure:   ?                  Do you want to continue the installation [NO]?i  D                  If you did not include the OPTIONS N portion of theH                  VMSINSTAL command line, VMSINSTAL does not display thisG                  question. Instead, the following message is displayed:9  [                  %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP9  .               6. Check for active DCPS queues.  @                  If DCPS print queues are active while VMSINSTALB                  is running, messages similar to the following are                  displayed:d  R                  %DCPSVAX-W-QUEACTIVE, The following DCPS queues are still active:  [                  Queue                     Device                                    Statust[                  -----                     ------                                    ------ Y                  LN09                      DAN::LTA9000:                             IDLEeY                  LN17                      DAN::"AppleTalk/Dan's LN17+ps"            IDLE Y                  LN40                      DAN::"IP_RawTCP/ln40:6869"                IDLEpY                  LPS32                     DAN::"IP_CPAP/lps32.office.genicom.com"   IDLEu  L                  %DCPSVAX-I-NUMQUEUES, 4 existing DCPS queues, with 4 active  L                          Previously installed DCPS queues are still running.F                          Continuing this installation without enteringG                          STOP/QUEUE/RESET for each such queue can causetI                          inconsistent behavior among queues and can cause )                          the IVP to fail.e  H                                              Installing the Software 2-5 t               G                       Note that if you choose to have this installation G                       procedure automatically stop such queues, and the F                       installation subsequently aborts, this procedure:                       will not automatically restart them.  S               * Do you want these queues automatically stopped and restarted [YES]?   >               If you do not want the installation procedure to@               automatically stop them, you are given the optionsA               of aborting the installation or continuing with the ;               queues active. Continuing is not recommended./  .            7. Check for sufficient disk space.  A               VMSINSTAL checks to see if the amount of disk spaceR@               required for the installation is available. If theD               space is not available, a message indicates the amountB               of disk space that is required, and the installationA               is aborted. You must allocate sufficient disk spaceuD               and then start the VMSINSTAL procedure again. However,A               if you have already provided enough disk space, the /               installation procedure continues.   1            8. Purge extraneous versions of files.C  D               VMSINSTAL asks if you want to purge any files that are               being replaced.u  O               * Do you want to purge files replaced by this installation [YES]?   C               Enter YES if you want to save disk space or NO if you 2               think the files may still be of use.  B               If you enter a question mark (?) in response to this8               query, the following message is displayed:  M               During this installation, new files will be provided to replaceSQ               existing versions.  You may purge these older versions to save diskrM               space, or keep them if you feel they may be of use.  Purging is                recommended.               9. Define DCPS$LAYUP.  E               Next, the installation procedure looks for a definition C               of the logical name DCPS$LAYUP in the system table ing               executive mode.   A               o  If a definition exists, the following message is                   displayed:m         2-6 Installing the Software S  C            F                     %DCPSppp-I-LAYUPDEF, DCPS$LAYUP is already definedM                     -DCPSppp-I-LAYUPDEF, This installation will use its valueI  F                  o  If a definition does not exist, the procedure asksF                     you for a definition. Press <Return> to select theC                     default, SYS$SYSROOT:[SYSHLP.EXAMPLES.DCPS], orsD                     enter a directory specification where the system<                     layup definition files should be stored.  Z                     * Full definition for DCPS$LAYUP [SYS$SYSROOT:[SYSHLP.EXAMPLES.DCPS]]:  B                     The procedure will validate the definition youF                     provide. If you do not accept the default locationC                     and the specified directory does not exist, thesD                     procedure will ask you if you want to create it:  <                     DISK$USER:[MY-LAYUP-DIR] does not exist.  %                     * Create it? [N]?r  H                     If you answer NO, the procedure will ask again for a                     definition.   $              10. Create directories.  G                  VMSINSTAL then attempts to create several directories. G                  If they already exist, it displays additional messages !                  indicating this:A  P                  %VMSINSTAL-I-SYSDIR, This product creates system disk directory.                       VMI$ROOT:[SYSTEST.DCPS].I                  %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.DCPS] already exists P                  %VMSINSTAL-I-SYSDIR, This product creates system disk directory6                       VMI$ROOT:[SYSHLP.EXAMPLES.DCPS].Q                  %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.DCPS] already exists P                  %VMSINSTAL-I-SYSDIR, This product creates system disk directory?                       VMI$ROOT:[SYSHLP.EXAMPLES.DCPS.NETPRINT].%Z                  %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.DCPS.NETPRINT] already exists  8              11. Make sure the queue manager is running.  H                  VMSINSTAL checks to see if the queue manager is running                   on your system.  F                  If the queue manager is not present, the InstallationC                  Verification Procedure (IVP) does not run, and the A                  following messages are displayed on your screen:%  H                                              Installing the Software 2-7 -  O            F               %DCPSppp-I-NOQUEMGR, System queue manager is not runningQ               -DCPSppp-I-NOQUEMGR, IVP will NOT run.  Installation continuing ...   ?               The queue manager must be running if you want thee*               installation to run the IVP.             12. Stop queues.  E               At this point, VMSINSTAL displays the following message                on your screen:i  E               %DCPSppp-I-NOQUEST, No further questions will be asked.   ?               VMSINSTAL stops active DCPS queues, if any and ifA               desired.  S               %DCPSppp-I-STOPQUEUES, Stopping queues previously reported as active.   B           13. Restore the remaining save sets. As it restores each:               save set, VMSINSTAL reports on its progress:  B               VMSINSTAL-I-RESTORE, Restoring product saveset B ...B               VMSINSTAL-I-RESTORE, Restoring product saveset C ...  <               This operation may require up to 10 minutes to               complete.p  B               When all the save sets have been restored, VMSINSTALC               instructs you to perform postinstallation procedures.fA               Refer to the DECprint Supervisor for OpenVMS System 4               Manager's Guide for full instructions.  @               Next, VMSINSTAL moves the files from the temporaryC               locations used during installation to their permanent                directories.  M               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their targetx               directories...  =           14. Verify a successful software loading procedure.   E               The IVP verifies that the software was loaded properly. B               If the system queue manager is running, the IVP runsA               automatically and VMSINSTAL performs the following:   0               1. Creates a temporary print queue  ?               2. Queues the test files in [SYSTEST.DCPS] to theO4                  temporary print queue DCPS$IVP_TEST         2-8 Installing the Software a  n            ?                  3. Displays messages similar to the following:o  [                  Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43) started on DCPS$IVP_TESTlT                  %DCPS-I-JOBSTART, Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43)/                        started on DCPS$IVP_TESTs  L                  Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43) completed[                  Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44) started on DCPS$IVP_TEST T                  %DCPS-I-JOBSTART, Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44)/                        started on DCPS$IVP_TEST   L                  Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44) completed\                  Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) started on DCPS$IVP_TESTU                  %DCPS-I-JOBSTART, Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45)r/                        started on DCPS$IVP_TESTC  M                  Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) completedo^                  Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46) started on DCPS$IVP_TESTW                  %DCPS-I-JOBSTART, Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46)V/                        started on DCPS$IVP_TESTa  O                  Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46) completed Z                  Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47) started on DCPS$IVP_TESTS                  %DCPS-I-JOBSTART, Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47)o/                        started on DCPS$IVP_TESTr  K                  Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47) completedta                  Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48) started on DCPS$IVP_TEST Z                  %DCPS-I-JOBSTART, Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48)/                        started on DCPS$IVP_TEST   R                  Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48) completed[                  Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) started on DCPS$IVP_TESTtT                  %DCPS-I-JOBSTART, Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49)/                        started on DCPS$IVP_TESTV  L                  Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) completed  F                 ________________________Note  ________________________  =                 The IVP does not produce any hardcopy output.   E                 _____________________________________________________w    H                                              Installing the Software 2-9 N  ]            C               The IVP procedure automatically deletes the temporarypA               queue when the IVP completes. You can print the IVP ?               test files to a real printer later. (Refer to thee>               DECprint Supervisor for OpenVMS System Manager's               Guide.)r  <               You can also manually invoke the IVP after the'               installation by entering:   "               $ @SYS$TEST:DCPS$IVP  D               VMSINSTAL issues an informational message when the IVP               is completed:   Y                       IVP successful for OpenVMS DECprint Supervisor for OpenVMS Softwarek             15. Restart queues.   =               VMSINSTAL restarts previously stopped queues if A               the installation is successful and issues its finaln               messages:   V               %DCPSppp-I-STARTQUEUES, Restarting queues previously reported as active.  E                       Installation of DCPSppp Vn.n completed at 14:04e  7                       VMSINSTAL procedure done at 14:08c               $   $           16. Where to go from here.  A               Refer to the DECprint Supervisor for OpenVMS SystemeE               Manager's Guide for instructions on how to create print =               queues and customize your printing environment.d                      !      2-10 Installing the Software     y                  H                                                                        AH         ________________________________________________________________  H                                             Sample Installation Sessions        F               This appendix shows sample installations of the DECprintH               Supervisor software on both OpenVMS Alpha and VAX systems,G               with and without the DCPS software already present on the                system.o  C               Example A-1 shows a sample of an initial installationhE               of the DECprint Supervisor software on an OpenVMS AlphagH               system. Example A-2 shows a sample upgrade of the DECprint;               Supervisor software on an OpenVMS VAX system.a  B         Example A-1 Sample Installation on an OpenVMS Alpha System  8         $ @SYS$UPDATE:VMSINSTAL DCPSAXP CDROM: OPTIONS N  L                 OpenVMS Alpha Software Product Installation Procedure V7.2-1  #         It is 15-MAR-2001 at 23:02.   7         Enter a question mark (?) at any time for help.t  F         %VMSINSTAL-W-ACTIVE, The following processes are still active:                 ANDERSON                 KAMATH                 SCHULLMANS0         * Do you want to continue anyway [NO]? YF         * Are you satisfied with the backup of your system disk [YES]?  1         The following products will be processed:              DCPSAXP V2.0  ?                 Beginning installation of DCPSAXP V2.0 at 23:02n  H                                                      Cont'd on next page  H                                         Sample Installation Sessions A-1 S  T            @      Example A-1 (Cont.) Sample Installation on an OpenVMS Alpha                          Systemi  ;      %VMSINSTAL-I-RESTORE, Restoring product save set A ...t  L          Release notes included with this kit are always copied to SYS$HELP.  *          Additional Release Notes Options:  &              1.  Display release notes$              2.  Print release notes              3.  Both 1 and 2u"              4.  None of the above        * Select option [2]: 4o  7      * Do you want to continue the installation [NO]? Y P      %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.  I                 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * I                 *                                                       *oI                 *     Compaq DECprint Supervisor (DCPS) for OpenVMS     * I                 *                                                       *uI                 *    Copyright 1993-2001 Compaq Computer Corporation    *pI                 *                  All Rights Reserved                  * I                 *                                                       * I                 * * * * * * * * * * * * * * * * * * * * * * * * * * * * *   F      * Do you want to purge files replaced by this installation [YES]?  K      * Full definition for DCPS$LAYUP [SYS$SYSROOT:[SYSHLP.EXAMPLES.DCPS]]: D      %VMSINSTAL-I-SYSDIR, This product creates system disk directory!          VMI$ROOT:[SYSTEST.DCPS].lD      %VMSINSTAL-I-SYSDIR, This product creates system disk directory)          VMI$ROOT:[SYSHLP.EXAMPLES.DCPS].iD      %VMSINSTAL-I-SYSDIR, This product creates system disk directory-          VMI$ROOT:[SYSHLP.EXAMPLES.NETPRINT].eN      %DCPSAXP-I-ESTTIME, This installation will take between 1 and 10 minutes.<      %DCPSAXP-I-NOQUEST, No further questions will be asked.;      %VMSINSTAL-I-RESTORE, Restoring product save set B ...N;      %VMSINSTAL-I-RESTORE, Restoring product save set C ...a        Software installer:  E                                                   Cont'd on next page   %      A-2 Sample Installation Sessions  D  o            C         Example A-1 (Cont.) Sample Installation on an OpenVMS Alphal"                             System  M                 Starting with DCPS V2.0, the need for DCPS-OPEN and DCPS-PLUS O                 licenses has been eliminated.  The right to use all features of O                 DCPS is now included with the OpenVMS operating system license.   L                 Please remember to copy SYS$STARTUP:DCPS$STARTUP.TEMPLATE toL                 SYS$STARTUP:DCPS$STARTUP.COM.  Then edit the resulting copy,I                 following the instructions contained within it, to defineCL                 your DCPS environment and queue characteristics.  When done,H                 execute the file to establish and start the DCPS queues.K                 Also remember to edit SYS$MANAGER:SYSTARTUP_VMS.COM so that M                 DCPS$STARTUP.COM is automatically run at system startup time.:  M                 DCPS$STARTUP.COM should be executed after all printer devicesNH                 and interconnects are running.  Below is a summary list:  @                   printers via TCP/IP:      after TCP is startedI                   printers via LAT:         after LAT devices are createdoP                   printers via AppleTalk:   after the AppleTalk driver is loadedC                   PrintServers via DECnet:  after DECnet is started   V         %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...%         %DCPS-I-IVP, Beginning IVP...E  L                    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *L                    *                                                       *L                    *          Installation Verification Procedure          *L                    *                                                       *L                    *     Compaq DECprint Supervisor (DCPS) for OpenVMS     *L                    *                                                       *L                    *    Copyright 1993-2001 Compaq Computer Corporation    *L                    *                  All Rights Reserved                  *L                    *                                                       *L                    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  B                 IVP using Version DCPS V2.0 of DECprint Supervisor  S         Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 104) started on DCPS$IVP_TEST L         %DCPS-I-JOBSTART, Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 104)&               started on DCPS$IVP_TEST  H                                                      Cont'd on next page  H                                         Sample Installation Sessions A-3                 @      Example A-1 (Cont.) Sample Installation on an OpenVMS Alpha                          Systema  A      Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 104) completedsP      Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 105) started on DCPS$IVP_TESTI      %DCPS-I-JOBSTART, Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 105)t#            started on DCPS$IVP_TEST   A      Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 105) completedrQ      Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 106) started on DCPS$IVP_TEST J      %DCPS-I-JOBSTART, Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 106)#            started on DCPS$IVP_TESTt  B      Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 106) completedS      Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 107) started on DCPS$IVP_TESTvL      %DCPS-I-JOBSTART, Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 107)#            started on DCPS$IVP_TEST   D      Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 107) completedO      Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 108) started on DCPS$IVP_TESThH      %DCPS-I-JOBSTART, Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 108)#            started on DCPS$IVP_TESTb  @      Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 108) completedV      Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 109) started on DCPS$IVP_TESTO      %DCPS-I-JOBSTART, Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 109)D#            started on DCPS$IVP_TEST   G      Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 109) completed P      Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 110) started on DCPS$IVP_TESTI      %DCPS-I-JOBSTART, Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 110) #            started on DCPS$IVP_TESTP  A      Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 110) completedh  =              IVP successful for DECprint Supervisor DCPS V2.0   <              Installation of DCPSAXP V2.0 completed at 23:04  C          Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORYc  N          Creating installation data file: VMI$ROOT:[SYSUPD]DCPSAXP014.VMI_DATA  .              VMSINSTAL procedure done at 23:05  E                                                   Cont'd on next pagec  %      A-4 Sample Installation Sessionsi                 C         Example A-1 (Cont.) Sample Installation on an OpenVMS Alpha "                             System  	         $a    ;         Example A-2 Sample Upgrade on an OpenVMS VAX System   8         $ @SYS$UPDATE:VMSINSTAL DCPSVAX CDROM: OPTIONS N  H                 OpenVMS VAX Software Product Installation Procedure V7.2  #         It is 13-MAR-2001 at 12:24.s  7         Enter a question mark (?) at any time for help.s  F         * Are you satisfied with the backup of your system disk [YES]?  1         The following products will be processed:.             DCPSVAX V2.0  ?                 Beginning installation of DCPSVAX V2.0 at 12:24   >         %VMSINSTAL-I-RESTORE, Restoring product save set A ...  O             Release notes included with this kit are always copied to SYS$HELP.A  -             Additional Release Notes Options:a  )                 1.  Display release notesD'                 2.  Print release notesc                  3.  Both 1 and 2%                 4.  None of the above            * Select option [2]: 4:         * Do you want to continue the installation [NO]? YS         %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.c  H                                                      Cont'd on next page          H                                         Sample Installation Sessions A-5                 @      Example A-2 (Cont.) Sample Upgrade on an OpenVMS VAX System  I                 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * I                 *                                                       * I                 *     Compaq DECprint Supervisor (DCPS) for OpenVMS     *DI                 *                                                       * I                 *    Copyright 1993-2001 Compaq Computer Corporation    *nI                 *                  All Rights Reserved                  *tI                 *                                                       *uI                 * * * * * * * * * * * * * * * * * * * * * * * * * * * * *e  F      %DCPSVAX-W-QUEACTIVE, The following DCPS queues are still active:  O      Queue                     Device                                    StatuspO      -----                     ------                                    ------AM      LN09                      DAN::LTA9000:                             IDLE M      LN17                      DAN::"AppleTalk/Dan's LN17+ps"            IDLE M      LN40                      DAN::"IP_RawTCP/ln40:6869"                IDLEo  @      %DCPSVAX-I-NUMQUEUES, 4 existing DCPS queues, with 3 active  @              Previously installed DCPS queues are still running.:              Continuing this installation without entering;              STOP/QUEUE/RESET for each such queue can causer=              inconsistent behavior among queues and can causec              the IVP to fail.M  >              Note that if you choose to have this installation>              procedure automatically stop such queues, and the=              installation subsequently aborts, this proceduren1              will not automatically restart them.r  J      * Do you want these queues automatically stopped and restarted [YES]?  F      * Do you want to purge files replaced by this installation [YES]?  E                                                   Cont'd on next page                 %      A-6 Sample Installation Sessions                  C         Example A-2 (Cont.) Sample Upgrade on an OpenVMS VAX Systemf  :         %DCPSVAX-I-LAYUPDEF, DCPS$LAYUP is already definedA         -DCPSVAX-I-LAYUPDEF, This installation will use its value G         %VMSINSTAL-I-SYSDIR, This product creates system disk directoryg%              VMI$ROOT:[SYSTEST.DCPS].T@         %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.DCPS] already existsG         %VMSINSTAL-I-SYSDIR, This product creates system disk directoryy-              VMI$ROOT:[SYSHLP.EXAMPLES.DCPS].PH         %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.DCPS] already existsG         %VMSINSTAL-I-SYSDIR, This product creates system disk directoryt6              VMI$ROOT:[SYSHLP.EXAMPLES.DCPS.NETPRINT].Q         %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.DCPS.NETPRINT] already exists Q         %DCPSVAX-I-ESTTIME, This installation will take between 1 and 10 minutes,TU         -DCPSVAX-I-ESTTIME,  excluding time needed to stop and restart active queues.r?         %DCPSVAX-I-NOQUEST, No further questions will be asked.,M         %DCPSVAX-I-STOPQUEUES, Stopping queues previously reported as active.a>         %VMSINSTAL-I-RESTORE, Restoring product save set B ...>         %VMSINSTAL-I-RESTORE, Restoring product save set C ...           Software installer:_  M                 Starting with DCPS V2.0, the need for DCPS-OPEN and DCPS-PLUSDO                 licenses has been eliminated.  The right to use all features ofoO                 DCPS is now included with the OpenVMS operating system license.n  L                 Please remember to copy SYS$STARTUP:DCPS$STARTUP.TEMPLATE toL                 SYS$STARTUP:DCPS$STARTUP.COM.  Then edit the resulting copy,I                 following the instructions contained within it, to defineCL                 your DCPS environment and queue characteristics.  When done,H                 execute the file to establish and start the DCPS queues.K                 Also remember to edit SYS$MANAGER:SYSTARTUP_VMS.COM so thatJM                 DCPS$STARTUP.COM is automatically run at system startup time.s  M                 DCPS$STARTUP.COM should be executed after all printer devicesIH                 and interconnects are running.  Below is a summary list:  @                   printers via TCP/IP:      after TCP is startedI                   printers via LAT:         after LAT devices are created P                   printers via AppleTalk:   after the AppleTalk driver is loadedC                   PrintServers via DECnet:  after DECnet is started_  H                                                      Cont'd on next page    H                                         Sample Installation Sessions A-7 _  _            @      Example A-2 (Cont.) Sample Upgrade on an OpenVMS VAX System  J              If you are converting CPS queues to DCPS, you may want to runG              the utility SYS$STARTUP:CPS_TO_DCPS_STARTUP.COM instead oftG              editing the startup template.  This utility will read yourtK              CPS startup file, change the queue definitions to use DCPS$SMBgH              and its library and logical names, and write out a new DCPS              startup file.  S      %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... "      %DCPS-I-IVP, Beginning IVP...  I                 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * I                 *                                                       * I                 *          Installation Verification Procedure          *eI                 *                                                       *iI                 *     Compaq DECprint Supervisor (DCPS) for OpenVMS     *tI                 *                                                       *lI                 *    Copyright 1993-2001 Compaq Computer Corporation    *AI                 *                  All Rights Reserved                  *rI                 *                                                       *eI                 * * * * * * * * * * * * * * * * * * * * * * * * * * * * *   ?              IVP using Version DCPS V2.0 of DECprint Supervisor   O      Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43) started on DCPS$IVP_TEST H      %DCPS-I-JOBSTART, Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43)#            started on DCPS$IVP_TEST_  @      Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43) completedO      Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44) started on DCPS$IVP_TEST H      %DCPS-I-JOBSTART, Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44)#            started on DCPS$IVP_TEST   @      Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44) completedP      Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) started on DCPS$IVP_TESTI      %DCPS-I-JOBSTART, Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) #            started on DCPS$IVP_TEST   A      Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) completedeR      Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46) started on DCPS$IVP_TESTK      %DCPS-I-JOBSTART, Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46):#            started on DCPS$IVP_TEST   E                                                   Cont'd on next pageM  %      A-8 Sample Installation Sessionss n  r            C         Example A-2 (Cont.) Sample Upgrade on an OpenVMS VAX Systems  F         Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46) completedQ         Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47) started on DCPS$IVP_TEST J         %DCPS-I-JOBSTART, Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47)&               started on DCPS$IVP_TEST  B         Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47) completedX         Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48) started on DCPS$IVP_TESTQ         %DCPS-I-JOBSTART, Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48)A          started on DCPS$IVP_TEST  I         Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48) completed R         Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) started on DCPS$IVP_TESTK         %DCPS-I-JOBSTART, Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) &               started on DCPS$IVP_TEST  C         Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) completede  @                 IVP successful for DECprint Supervisor DCPS V2.0  P         %DCPSVAX-I-STARTQUEUES, Restarting queues previously reported as active.  ?                 Installation of DCPSVAX V2.0 completed at 12:27   1                 VMSINSTAL procedure done at 12:27   	         $                                   H                                         Sample Installation Sessions A-9                       H                                                                        BH         ________________________________________________________________  H                                                          System Messages      F               This appendix describes the DECprint Supervisor messages(               in the following sections:  2               o  Overview of messages, Section B.1  8               o  DCPS Installation Messages, Section B.2  #         B.1 System Message Overviewl           B.1.1 Message Format  A               DECprint Supervisor system messages have one of theM                following formats:                  %fac-s-ident, text                -fac-s-ident, text  H               __________________________________________________________H               Code___Meaning____________________________________________  8               %      The prefix for all primary messages  =               -      The prefix for all continuation messagesa  <               fac    The facility code, which should be DCPS  6               s      The severity level of the message  8               ident  An abbreviation of the message text  H               text___The_expanded_text_of_the_message___________________        H                                                      System Messages B-1 a  n                  B.1.2 Severity Level   E            The severity levels of DECprint Supervisor system messages "            are defined as follows:  E            __________________________________________________________ E            Code_Meaning______________________________________________s  >            S    Success - successful completion of the request  7            I    Informational - may require user actionc  @            W    Warning - request may not have completed and may#                 require user actions  ?            E    Error - system encountered an error that may bew                 recoverable   C            F    Fatal - system encountered a fatal error and cannot E            _____continue_processing_this_request_____________________   #      B.2 DCPS Installation MessagesY  C            The following DCPS message descriptions are alphabetizediD            by the ident portion of the message. The message severity>            level and text are also shown, while the prefix andD            facility designation (DCPSppp are omitted. If you receiveB            a message from a facility other than DCPS, refer to theD            OpenVMS System Messages: Companion Guide for Help MessageC            Users for the message description or use the online helpr:            message utility with the command HELP /MESSAGE.  @        E-BADSPEC, File spec LPS$SINGLEHOLES.LUP cannot be parsed  @          Explanation: The current definition of the logical name@          DCPS$LAYUP is invalid, possibly because of an incorrectA          answer given to the question about the location of layup D          files in an earlier DCPS installation. (DCPS V1.6 and laterD          now validate such responses; see the Release Notes for more          information.)  A          User Action: Deassign the logical name with the command:E  6          $ DEASSIGN /SYSTEM /EXECUTIVE_MODE DCPS$LAYUP  ?          Then start the DCPS installation again and you will be 7          prompted for the location for the layup files.o        B-2 System Messages    *            F          E-BADVMSVER, This product requires OpenVMS version version or             later to install  F             Explanation: The DCPS software requires a later version of)             the OpenVMS operating system.   E             User Action: Upgrade your operating system to the correctP             version.  @          I-ESTTIME, This installation will take between 1 and 10             minutes,D          I-ESTTIME, excluding time needed to stop and restart active             queues.   F             Explanation: This informational message estimates the time1             it will take to install the software.s  /             User Action: No action is required.S  E          W-HIDES, If these files remain, they will be used instead of              theVD          W-HIDES, DCPS product files you are installing now, and the             IVPI  G             Explanation: DECprint Supervisor for OpenVMS warns you thatPG             the existing DCPS files in SYS$SPECIFIC directories will beI,             used instead of the latest ones.  D             User Action: Remove or rename the listed DCPS files from)             the SYS$SPECIFIC directories.   5          E-INVDIRSPE, invalid directory specificationV  E             Explanation: The syntax of the directory specified is not$             correct.  A             User Action: Specify a directory with correct syntax.$  3          I-LAYUPDEF, DCPS$LAYUP is already defined.C:          I-LAYUPDEF, This installation will use its value.  C             Explanation: The installation uses the existing logical4              name for DCPS$LAYUP.  /             User Action: No action is required._  H                                                      System Messages B-3 _               <        I-NOHELP, There is no help in this install procedure.A        I-NOHELP, Please refer to the Software Installation Guide.   @          Explanation: This informational messages states that no          help is available.I  B          User Action: Refer to the Software Installation Guide for          more information.  7        I-NOQUEMGR, System queue manager is not running.S@        I-NOQUEMGR, IVP will NOT be run. Installation continuing.  C          Explanation: The queue manager is not running on your sys-PB          tem. The installation will continue, but the Installation+          Verification Procedure cannot run.u  B          User Action: After the installation, start the queue man-D          ager and then manually invoke the IVP (@SYS$TEST:DCPS$IVP).  4        I-NOQUEST, No further questions will be asked  @          Explanation: The VMSINSTAL procedure will continue from=          this point without requiring further input from you.   ,          User Action: No action is required.  <        W-NORSTRT, Automatically stopped queues have not been          restarted  @          Explanation: VMSINSTAL has not restarted queues that it          automatically stopped.a  A          User Action: Resolve the problem that caused the instal- B          lation to terminate abnormally, and then manually restartC          the queues that the DCPS installation procedure previously           listed as active.  ,        E-NOSUCHDEV, no such device available  :          Explanation: The device specified does not exist.  B          User Action: Specify a device that exists on your system.  >        E-NO_DECC_RTL, DEC C run-time library is not installed.  @          Explanation: There is no DEC C run-time library on your          system.  D          User Action: Install the DEC C/C++ Run-Time Components kit.        B-4 System Messages    e            @          E-NO_QUEMAN, This product requires the queue management              facility to install.  B             Explanation: The queue manager could not be found. The.             installation procedure is aborted.  G             User Action: Start the queue manager. For information refer2=             to the OpenVMS System Manager's Reference Manual.Y  F          E-NO_SPACE, This product requires number blocks of disk space             to install.   >             Explanation: There are not enough free disk blocks@             to install this software. The installation procedure             terminates.   D             User Action: Ensure that you have at least the specifiedD             number of free disk blocks and restart the installation.  @          I-NUMQUEUES, existing-number existing DCPS queues, with!             active-number active.   G             Explanation: This message informs you of the number of DCPS E             queues you have and how many of them are active (that is,              not stopped).1  /             User Action: No action is required.   F          W-PURGW, Purging files may leave running queues with no image,          W-PURGW, file and the IVP may fail.  B             Explanation: Purging DCPS files while multistream DCPS:             symbionts are still active can cause problems.  B             User Action: Avoid purging existing files, or stop allB             active queues before proceeding with the installation.  ?          I-QSCANNING, Looking for existing DCPS print queues...   F             Explanation: This informational message tells you that theD             installation procedure is checking for print queues that             already exist.  /             User Action: No action is required.   H                                                      System Messages B-5                 :        W-QUEACTIVE, The following queues are still active:  @          Explanation: The installation procedure found some DCPSC          queues still active, as listed in subsequent lines. If younD          do not stop the active queues, the installation may fail or9          interfere with jobs that are currently printing.l  >          User Action: When subsequently asked, allow VMSINSTAL@          to automatically stop the queues, or manually stop themD          yourself and restart the installation procedure. If some ofB          the queues are not in an idle state, you may wish to wait/          until all jobs have finished printing.i  E        I-STARTQUEUES, Restarting queues previously reported as activeo  B          Explanation: VMSINSTAL is currently restarting all queues.          it had previously reported as active.  ,          Explanation: No action is required.  B        I-STOPQUEUES, Stopping queues previously reported as active  C          Explanation: VMSINSTAL is currently stopping all queues itS+          had previously reported as active.d  ,          User Action: No action is required.  @        W-SYSPF, This system contains DCPS images in SYS$SPECIFIC          areas:S  A          Explanation: Your system has one or more DCPS executable D          images in a SYS$SPECIFIC directory, as listed in subsequentA          lines. The new images that you are about to install willS@          not be used because of the presence of the SYS$SPECIFIC          versions.  <          User Action: Delete or rename the DCPS files in theA          SYS$SPECIFIC directories, so that new ones in SYS$COMMON           will be used.  =        F-WRONGARCH, This product will only install on OpenVMSu          platform.  B          Explanation: You have attempted to install the kit on the          wrong platform.  ?          User Action: Install the kit on either an Alpha or VAXtB          platform, as indicated by the message, or use a different&          kit for the current platform.        B-6 System Messages .                     H                                                                        CH         ________________________________________________________________  H                                        Ordering Additional Documentation      ?               This appendix lists Compaq software documents andoE               documentation kits associated with PostScript printers,:1               and their respective order numbers.   G               The asterisk (*) in an order number stands for the latest -               version of the document or kit.h  H               PrintServer_Software______________________________________                 SoftwareH               Document_________Part_Number______________________________  *               Digital UNIX     QA-0V9AJ-GZ  *               HP-UX            QA-0V9AD-GZ  *               IBM-AIX          QA-0V9AE-GZ  *               IRIX             QA-0V9AQ-GZ  *               OpenVMS          QA-0V9AA-GZ  *               Solaris          QA-0V9AK-GZ  *               SunOS            QA-0V9AC-GZ  *               ULTRIX           QA-0V9AB-GZ  H               Windows__________QA-0V9AH-GZ______________________________  F                 ________________________Note  ________________________  C                 PrintServer Software is being retired in 2001. This 9                 documentation may no longer be available.   E                 _____________________________________________________A  H                                    Ordering Additional Documentation C-1 o  r            /            PostScript Programming Documentatione  B            o  PrintServer Printers PostScript Level 2 Programmer's               Supplement)               (order number: EK-PRTPL-PS)   9            o  PostScript Printers Programmer's SupplementP)               (order number: AA-HL84*-TE)g  3            DECprint Supervisor Software for OpenVMSt  @            The following is the DECprint Supervisor Software for!            OpenVMS documentation.%  A            Complete documentation kit (order number: QA-09NAA-GZ)   C            o  DECprint Supervisor for OpenVMS Software Installation                Guide   D            o  DECprint Supervisor for OpenVMS System Manager's Guide  :            o  DECprint Supervisor for OpenVMS User's Guide  ;            DIGITAL ANSI-Compliant Level 3 Printing Protocolp  >            The following is the DIGITAL ANSI-Compliant Level 3+            Printing Protocol documentation.   8            Documentation kit (order number: QA-YNCA*-GZ)  >            o  DIGITAL ANSI-Compliant Printing Protocol Level 3*               Programming Reference Manual  >            o  DIGITAL ANSI-Compliant Printing Protocol Level 3$               Programming Supplement                    *      C-2 Ordering Additional Documentation g  r                          E      ________________________________________________________________s  E                                                                 Index     C      A                                    Installation Verificationb5      ___________________________            Procedured2      AppleTalk network printing,           See IVP-         1-3                               IVPBB                                            how to manually invoke,2      C__________________________              2-10D      Conventions,  vi                      may fail if purging files4      CPAP,  1-3                               ,  B-58                                            may fail withA      D__________________________              SYS$SPECIFIC files,b1      DCPS$LAYUP logical,  2-6                 B-3pD      DDIF printing,  1-3                   requires queue manager to>      DEC C Run-time library,                  be running,  B-4  +         1-2                               MsE      Disk space requirements,             ___________________________ 7         1-1                               Messages, B-1nD      Documentation                         descriptions,  B-2 to B-67        Compaq/DIGITAL PostScript           format,  B-1KB          printers,  C-1                    severity level of,  B-2  E      ___________________________          N__________________________D  :      Error messages                       Network printing@        See Messages                        using AppleTalk,  1-3=                                            using TCP/IP,  1-3S  +      I__________________________          O E      Installation procedure               ___________________________NE        questions, 2-2                     OpenVMS VAX V5.5-2 systems, /        sample session, A-1                  1-2_      E                                                               Index-1n                 C                                            for other software,  1-2$D      P__________________________           for printers on AppleTalk<      Printer documentation,  C-1              networks,  1-3A      Printers                              for printers on TCP/IP0<        on AppleTalk networks,                 networks,  1-3            1-3E        on TCP/IP networks, 1-3            S__________________________2  9      PrintServer printers                 System messages 7        requirements, 1-2                   See Messages   E      Q__________________________          T__________________________   0      Queues                               TCP/IPD        for printers on AppleTalk           printer connections,  1-3=          networks,  1-3                    requirements,  1-3         for printers on TCP/IP E          networks,  1-3                   V__________________________i  3      R                                    VMSINSTALs<      ___________________________           conventions,  2-2B      Raw TCP/IP,  1-3                      installation questions,1      Requirements                             2-2e        disk space, 1-1                                              Index-2