 

















                     HP_DECforms___________________________________
                     Installation Guide for OpenVMS Systems

                     Order Number: AA-Q504F-TE


                     January 2006

                     HP DECforms is a software product for applications,
                     services, and tools that require a structured,
                     forms-based, or menu-based user interface. DECforms
                     is the first commercial implementation of an
                     ANSI/ISO standard for forms-based interfaces, the
                     CODASYL Form Interface Management System (FIMS).






                     Revision/Update Information: This is a revised
                                                  manual.

                     Operating System:            OpenVMS Alpha Version
                                                  7.3-2 or later
                                                  OpenVMS I64 Version
                                                  8.2 or later

                     Software Version:            HP DECforms Version
                                                  4.0

                     Hewlett-Packard Company
                     Palo Alto, California

 






           __________________________________________________________

            Copyright 2006 Hewlett-Packard Development Company, L.P.

           Confidential computer software. Valid license from HP
           required for possession, use, or copying. Consistent
           with FAR 12.211 and 12.212, Commercial Computer Software,
           Computer Software Documentation, and Technical Data for
           Commercial Items are licensed to the U.S. Government under
           vendors standard commercial license.

           The information contained herein is subject to change
           without notice. The only warranties for HP products
           and services are set forth in the express warranty
           statements accompanying such products and services.
           Nothing herein should be construed as constituting an
           additional warranty. HP shall not be liable for technical
           or editorial errors or omissions contained herein.

           Intel and Itanium are trademarks or registered trademarks
           of Intel Corporation or its subsidiaries in the United
           States and other countries.

           Oracle CDD, Oracle/Administrator, Oracle CDD/Repository,
           Oracle Rdb, and Oracle TRACE are trademarks of Oracle
           Corporation.

           Motif is a registered trademark of the Open Software
           Foundation, Inc.

           ISO is a trademark of the International Organization for
           Standardization.

           PostScript is a registered trademark of Adobe Systems,
           Incorporated.

           Printed in the US.

           This document was prepared using VAX DOCUMENT Version 2.1.

 













   ________________________________________________________________

                                                           Contents


   Preface..................................................    vii


   1  Preparing to Install DECforms Software

         1.1   Required Operating System Components.........    1-1
         1.2    Required and Optional Software..............    1-2
         1.3   Required Hardware............................    1-3
         1.4   License Registration.........................    1-3
         1.5   Installation Requirements....................    1-4
         1.5.1     Time.....................................    1-4
         1.5.2     Privileges...............................    1-4
         1.5.3     Disk Space...............................    1-4
         1.5.4     VMSINSTAL Requirements...................    1-5
         1.5.5     Backing Up Your System Disk..............    1-6

   2  Installing DECforms Software

         2.1   Accessing the Online Release Notes...........    2-1
         2.2   Determining the Files and Logical Names Added
               to the System................................    2-1
         2.3   Running the Installation Verification
               Procedure....................................    2-2
         2.4   Aborting the Installation....................    2-2
         2.5   Running the Installation Procedure...........    2-2
         2.5.1     Running VMSINSTAL........................    2-3
         2.5.2     Answering Installation Questions.........    2-4
         2.5.3     Informational Messages...................    2-9
         2.5.4     Running the Installation Verification
                   Procedure................................   2-10
         2.5.5     Completing the Installation Procedure....   2-10
         2.6   Error Recovery...............................   2-11


                                                                iii

 






     3  After Installing DECforms Software

           3.1   Editing the System Startup File..............    3-1
           3.2   Hebrew Installation Notes....................    3-2
           3.3   User Account Requirements....................    3-3
           3.4   System Parameters............................    3-5
           3.5   Cluster Considerations.......................    3-6
           3.6   Installing the Form Development Utilities as
                 Shared Images................................    3-6
           3.7   Determining and Reporting Problems...........    3-8

     A  Alpha Systems Sample Installation

           A.1   Full Development Kit for English Variant of
                 DECforms.....................................    A-2
           A.2   Run-Time Kit for English Variant of
                 DECforms.....................................    A-6
           A.3   Full Development Kit for Asian Variant of
                 DECforms.....................................    A-9
           A.4   Run-Time Kit for Asian Variant of DECforms...   A-15

     B  I64 Systems Sample Installation

           B.1   Full Development Kit for English Variant of
                 DECforms.....................................    B-2
           B.2   Run-Time Kit for English Variant of
                 DECforms.....................................    B-7
           B.3   Full Development Kit for Asian variant of
                 DECforms.....................................   B-10
           B.4   Run-Time Kit for Asian Variant of DECforms...   B-16

     C  Files and Logical Names Installed on Your System

           C.1   Files Added and Modified by the Full
                 Development Kit..............................    C-1
           C.2   Files Added and Modified by the Run-Time
                 Kit..........................................    C-5
           C.3   Logical Names Added..........................    C-6







     iv

 






        Examples

              A-1       Alpha Sample Full Development Kit
                        Installation.............................    A-2

              A-2       Alpha Sample Run-Time Kit Installation
                        for English Variant......................    A-7

              A-3       Alpha Sample Full Development Kit
                        Installation.............................   A-10

              A-4       Alpha Sample Full Development Kit
                        Installation.............................   A-15

              B-1       I64 Sample Full Development Kit
                        Installation.............................    B-2

              B-2       I64 Sample Run-Time Kit Installation.....    B-7

              B-3       I64 Sample Full Development Kit
                        Installation.............................   B-10

              B-4       I64 Sample Run-Time Kit Installation.....   B-16

        Tables

              1         Conventions Used in the Guide............     xi

              1-1       Disk Space Requirements..................    1-5

              3-1       Minimum User Account Quotas for
                        Developing DECforms Applications.........    3-3

              3-2       Minimum System Parameter Values for
                        Developing DECforms Applications.........    3-5










                                                                       v

 











        ________________________________________________________________

                                                                 Preface



              This manual describes how to install HP DECforms Version
              4.0 and how to verify the installation.

              This manual refers to some HP products by their abbrevi-
              ated names:

              o  HP DECforms software is referred to as DECforms.

              o  DEC Language-Sensitive Editor software is referred to
                 as DEC LSE.

        Who Should Use This Guide

              This manual is for those who install and maintain DECforms
              software. You should read this manual before installing
              DECforms.

        Structure of This Guide

              This manual has three chapters and three appendixes.

              Chapter 1   Describes the preparations and requirements
                          for installing DECforms.

              Chapter 2   Describes the installation procedure.

              Chapter 3   Describes the tasks you should do after
                          installing DECforms.

              Appendix A  Reproduces typical installation sessions on
                          Alpha systems.

              Appendix B  Reproduces typical installation sessions on
                          I64 systems.

                                                                     vii

 







           Appendix C  Lists the files that are installed or modified
                       and the logical names that are defined or
                       modified during the installation procedure.









































     viii

 






        For More Information

              See the online help, the online release notes, and the
              following documents for more information about DECforms:

              o  HP DECforms Guide to Commands and Utilities-Describes
                 the DECforms FORMS commands and utilities.

              o  HP DECforms IFDL Reference Manual-Describes the syntax
                 of the DECforms Independent Form Description Language.

              o  HP DECforms Style Guide for Character-Cell Devices-
                 Describes how to develop user interfaces with a Motif
                 style for DECforms applications for character-cell
                 terminals.

              o  HP DECforms Programmer's Reference Manual-Describes how
                 DECforms software operates at run time and how to call
                 the DECforms requests from an application program.

              o  HP DECforms Guide to Developing an Application-Part I
                 explains for the beginning DECforms programmer how to
                 create a DECforms application, including both the form
                 and the program. Part II contains additional guidelines
                 and examples for more experienced DECforms programmers.

              o  HP DECforms Guide to Demonstration Forms and Applications-
                 Describes how to use various demonstration forms and
                 applications. This guide is contained in online files
                 named forms$demo_guide.txt and forms$demo_guide.ps in
                 the FORMS$EXAMPLES directory on OpenVMS systems. If you
                 cannot find this document, ask your system manager to
                 install it in the appropriate directory.

                 For information about displaying these forms, see the
                 HP DECforms Guide to Developing an Application.

              o  HP DECforms Guide to Converting FMS Applications-
                 Describes how to convert a VAX FMS or DEC FMS
                 application to a DECforms application.





                                                                      ix

 






           For further information on other topics covered in this
           guide, see the following:

           o  DEC LSE documentation for information on how to use DEC
              LSE

           o  Oracle CDD documentation set for information on CDD
              definitions

           o  ISO IS 11730:1994 for information on the standard
              of which DECforms is an implementation (see the
              Acknowledgment section)

           For additional information on installing DECforms, see the
           OpenVMS operating system documentation for these topics:

           o  VMSINSTAL procedure

           o  Install Utility (INSTALL)

           o  System management and operations

     Reader's Comments

           HP welcomes your comments on this manual or any of the
           DECforms. Please send comments to either of the following
           addresses:

           Internet    openvmsdoc@hp.com

           Mail        Hewlett-Packard Company
                       OSSG Documentation Group, ZKO3-4/U08
                       110 Spit Brook Rd.
                       Nashua, NH 03062-2698

     How To Order Additional Documentation

           For information about how to order additional documenta-
           tion and for online versions of most DECforms, visit the
           following World Wide Web address:

           http://www.hp.com/go/openvms/doc/



     x

 






        Conventions

              Table 1 lists the conventions used in this guide.

              Table_1_Conventions_Used_in_the_Guide_____________________

              Symbol_or_Term___Meaning__________________________________

              Ctrl/X           In procedures, a sequence such as Ctrl/X
                               indicates that you must hold down the key
                               labeled Ctrl while you press another key.

              KPn              Key names that begin with KP indicate
                               keys on the numeric keypad on the right
                               side of the terminal keyboard. For
                               example, KP4 and KP. are keys on the
                               numeric keypad.

              PF1-x            A sequence such as PF1-x indicates that
                               you must first press and release the key
                               labeled PF1, and then press and release
                               another key.

               . . .           In examples, horizontal ellipsis
                               points indicate one of the following
                               possibilities:

                               o  Additional optional arguments in a
                                  statement have been omitted.

                               o  The preceding item or items can be
                                  repeated one or more times.

                               o  Additional parameters, values, or
                                  other information can be entered.

              .                Vertical ellipsis points indicate the
              .                omission of items from a code example
              .                or command format; the items are omitted
                               because they are not important to the
                               topic being discussed.

                                                (continued on next page)


                                                                      xi

 






           Table_1_(Cont.)_Conventions_Used_in_the_Guide_____________

           Symbol_or_Term___Meaning__________________________________

           ()               In format descriptions, parentheses
                            indicate that if you choose more than
                            one option, you must enclose the choices
                            in parentheses.

           []               In format descriptions, brackets indicate
                            that whatever is enclosed is optional;
                            you can select none, one, or all of the
                            choices.

           {}               In format descriptions, braces surround
                            a required choice of options; you must
                            choose one of the options listed.

           $ user input     User input is shown in bold.

           Bold             DECforms terms are shown in bold where
                            introduced or explained.

           $                The dollar sign is used to indicate the
           _________________user_prompt_on_OpenVMS_systems.__________

           Unless otherwise specified, you terminate commands by
           pressing the Return key.

     Acknowledgment

           DECforms is the HP implementation of a Form Interface
           Management System (FIMS) ANSI/ISO standard prepared by
           the CODASYL Form Interface Management System Committee
           and ISO/IEC JTC1/SC22 Working Group 18. The FIMS standard
           is documented in ISO IS 11730:1994 and can be purchased
           from the International Organization for Standardization or
           American National Standards Institute.







     xii

 









                                                                       1
        ________________________________________________________________

                                  Preparing to Install DECforms Software



              This chapter discusses the preparations and requirements
              for installing HP DECforms software.

              Your bill of materials (BOM) and indented bills report
              (BIL) specify the number of media in your kit and the
              contents of your kit. Make sure you compare your kit with
              this information. If your kit is damaged or incomplete,
              contact your HP representative.

              DECforms provides online release notes. You can read or
              print the release notes before you begin the DECforms
              installation.

                ___________________Recommendation  ___________________

                HP Computer Corporation strongly recommends that you
                read the release notes before you proceed with the
                installation. For more information about the release
                notes that ship with your kit, see Section 2.1.

                _____________________________________________________

        1.1 Required Operating System Components

              To install DECforms, you must have certain operating
              system components. The components you need depend on
              whether you are installing the DECforms full development
              kit or the run-time kit.

              The DECforms full development kit contains the DECforms
              run-time system and development utilities. To install
              this kit, you must have installed the following OpenVMS
              classes:

              o  OpenVMS required save set

              o  Programming support (for STARLET.OLB and IMAGELIB.OLB)

                              Preparing to Install DECforms Software 1-1

 






           o  Utilities (for HELPLIB.OLB)

           The DECforms run-time kit contains only the DECforms run-
           time system. To install the DECforms run-time kit, you
           must have installed the OpenVMS required save set class.

     1.2  Required and Optional Software

           This section discusses the software that must already be
           installed on your system before installing DECforms. The
           section also includes information about optional software
           that you can use with DECforms.

           To install DECforms, you must have installed on your
           system:

           o  OpenVMS operating system supported:

              o  OpenVMS Alpha Version 7.3-2 without support for
                 Oracle CDD/Repository Version 7.2 or later

              o  OpenVMS Alpha Version 8.2 with support for Oracle
                 CDD/Repository Version 7.2 or later

              o  OpenVMS I64 Version 8.2 without support for Oracle
                 CDD/Repository Version 7.2 or later

              o  OpenVMS I64 Version 8.2-1 with support for Oracle
                 CDD/Repository Version 7.2 or later

           o  Oracle CDD/Repository Version 7.2 or later, if you
              intend to store definitions in Oracle CDD/Repository
              software

           o  DEC LSE Version 2.3 or later if you intend to use the
              DEC Language-Sensitive Editor (DEC LSE) templates for
              the DECforms Independent Form Description Language
              (IFDL)

              For a complete list of the products that are compatible
              with this version of DECforms, see the Software Product
              Description.

              ________________________Note ________________________

              DECforms Version 4.0 software can be used with HP
              ACMS Version 5.0 or later.

              _____________________________________________________

     1-2 Preparing to Install DECforms Software

 






        1.3 Required Hardware

              DECforms supports HP VT100-, VT200-, VT300-, VT400-,
              VT500-series terminals, and PCs that use the Windows NT
              operating system.

        1.4 License Registration

              You must register the DECforms software license with
              the OpenVMS License Management Facility (LMF). The LMF
              is available with Version 5.0 of the OpenVMS operating
              system.

              The Product Authorization Key (PAK) that is shipped with
              DECforms contains the license registration information
              you need. The PAK is a paper certificate that contains
              information about the license you have purchased to run a
              particular piece of software.

              During the installation, you are asked whether you have
              registered the DECforms license and loaded the appropriate
              authorization keys. It is therefore best to register your
              DECforms license before you do the installation.

              If you have not registered the DECforms license and loaded
              the appropriate authorization keys, you can complete the
              installation; however, you cannot run either the DECforms
              software or its Installation Verification Procedure (IVP).
              Once you register the license and load an authorization
              key, you can run the IVP and use DECforms.

              To register a license under Version 5.5 or later of the
              OpenVMS operating system, log in to the system manager's
              account, SYSTEM. You then can register a license in one of
              the following ways:

              o  Run the SYS$UPDATE:VMSLICENSE.COM procedure. When the
                 procedure prompts you for information, enter data from
                 your PAK.

              o  Enter the LICENSE REGISTER command with the appropriate
                 qualifiers that correspond to information on the PAK.

              If you are installing DECforms on an OpenVMS Cluster
              system, you must register your license on each licensed
              node in the OpenVMS Cluster system.

                              Preparing to Install DECforms Software 1-3

 






           For complete information on using LMF, see the section in
           the OpenVMS documentation set on the License Management
           Facility.

     1.5 Installation Requirements

           The following sections discuss various requirements for
           installing DECforms.

     1.5.1 Time

           Installing DECforms and running the IVP requires
           approximately 5 to 35 minutes, depending on your system
           configuration and the distribution media you are using.

     1.5.2 Privileges

           To install DECforms, you must be logged into an account
           that has SETPRV or the following privileges:

           o  CMKRNL

           o  WORLD

           o  SYSPRV

           VMSINSTAL turns off BYPASS privilege at the start of the
           installation.

     1.5.3 Disk Space

           Installing DECforms requires a certain amount of free
           storage space before and after the installation, as shown
           in Table 1-1.











     1-4 Preparing to Install DECforms Software

 






              Table_1-1_Disk_Space_Requirements_________________________

                                 Blocks During    Blocks After
              DECforms_Kit_______Installation_____Installation__________

              Alpha Run-Time     5,300            5000
              Kit

              Alpha Full         41,000           40,000 (with sample
              Development Kit                     and demo applications)
                                                  21,000 (without sample
                                                  and demo applications)

              I64 Run-Time Kit   25,000           23,000

              I64 Full           80,000           75,000 (with sample
              Development Kit                     and demo applications)
                                                  60,000 (without sample
              ____________________________________and_demo_applications)

              To determine the number of free disk blocks on the system
              disk, enter the following command:

              $ SHOW DEVICE SYS$SYSDEVICE

        1.5.4 VMSINSTAL Requirements

              When you run VMSINSTAL, it checks whether:

              o  You are logged in to a privileged account.

              o  You have adequate quotas for installation.

              o  DECnet is up and running.

              o  Any users are logged in to the system.

              If VMSINSTAL detects any problems during the installation,
              it notifies you and asks whether you want to continue
              the installation. In some instances, you can enter YES
              to continue. To stop the installation and correct the
              situation, enter NO or press Return. Correct the problem
              and restart the installation.

              For more information about VMSINSTAL, see the HP OpenVMS
              System Management Utilities Reference Manual.

                              Preparing to Install DECforms Software 1-5

 






     1.5.5 Backing Up Your System Disk

           At the beginning of the installation, VMSINSTAL asks
           whether you have backed up your system disk. HP recommends
           that you back up your system disk before installing any
           software.

           Use the backup procedures that have been established at
           your site. For details on backing up your disk, see the
           section on the Backup Utility in the OpenVMS documentation
           set.


































     1-6 Preparing to Install DECforms Software

 









                                                                       2
        ________________________________________________________________

                                            Installing DECforms Software



              This chapter describes how to install HP DECforms
              software. Section 2.5 contains a step-by-step description
              of the installation procedure.

        2.1 Accessing the Online Release Notes

              You should review the Release Notes that DECforms
              provides; they might contain information about changes in
              the installation procedures. If you specify OPTIONS N when
              you run VMSINSTAL, the installation procedure asks you
              whether you want to display or print the release notes. HP
              recommends that you print the release notes.

              After you install DECforms, you can find the OpenVMS Alpha
              release notes located in

              $ SYS$HELP:FORMSA040.RELEASE_NOTES

              The release notes for OpenVMS I64 are located in

              $ SYS$HELP:FORMSI040.RELEASE_NOTES

        2.2 Determining the Files and Logical Names Added to the System

              The DECforms installation procedure adds a number of files
              to your system. It also modifies some files and defines
              some logical names. Appendix C lists the changes that the
              DECforms installation procedure makes to your system.







                                        Installing DECforms Software 2-1

 






     2.3 Running the Installation Verification Procedure

           The IVP for DECforms verifies the installation. DECforms
           provides two IVPs, one for the full development kit and
           one for the run-time kit.

           When you are installing the DECforms kit, the installation
           procedure asks whether you want to run the IVP as part of
           the installation. If you respond YES, VMSINSTAL runs the
           appropriate IVP. You should run the IVP to verify that
           DECforms is installed correctly.

           Should you need to run the IVP at any time after
           installation, enter the following command on a VT100-,
           VT200-, VT300-, VT400-, or VT500-series terminal or on a
           corresponding workstation terminal emulator:

           Run-Time Kit IVP

           $ @SYS$TEST:FORMS$RT_IVP.COM

           Full Development Kit IVP

           $ @SYS$TEST:FORMS$IVP.COM

     2.4 Aborting the Installation

           To abort the installation procedure at any time, press
           Ctrl/Y. The installation procedure deletes all files that
           it has created and exits. You can start the installation
           again.

     2.5 Running the Installation Procedure

           The DECforms installation procedure consists of a series
           of questions and informational messages. The following
           sections explain how to run the VMSINSTAL procedure
           and answer the installation questions. These sections
           also explain the informational messages displayed by the
           procedure.





     2-2 Installing DECforms Software

 






        2.5.1 Running VMSINSTAL

              To start the installation, run the VMSINSTAL command
              procedure from a privileged account, such as the SYSTEM
              account. VMSINSTAL is in the SYS$UPDATE directory.

              To set default to the SYS$UPDATE directory, enter the
              following command:

              $ SET DEFAULT SYS$UPDATE

              To run VMSINSTAL, enter a command with the following
              syntax:

              @VMSINSTAL [product-name device-name options-list]

              If you omit the parameters from the command line,
              VMSINSTAL asks you for this information later.

              The following list defines the elements of the VMSINSTAL
              procedure.

              product-name
              The installation name for the product. For the DECforms
              full development kit running on Alpha, use the installa-
              tion name FORMSA040. For the DECforms full development kit
              running on I64, use the installation name FORMSI040.

              For the DECforms run-time kit running on Alpha, use the
              installation name FORMSRTA040. For the DECforms run-time
              kit running on I64, use the installation name FORMSRTI040.

              device-name
              The name of the device on which you plan to mount the
              media or the directory where you copied the savesets.
              For example, MTA0: is the device name for a tape drive;
              DKA0:[MYDIRECTORY] the name for a disk drive. You do not
              need to use the console drive for this installation. If
              you do use the console drive, once the installation is
              complete, you should replace any media you removed.

              options-list
              The word OPTIONS followed by one or more of the available
              options designators, including the following:

              o  Display or print release notes (N)

                                        Installing DECforms Software 2-3

 






              Indicates you want to see the installation question
              on release notes. If you do not include the OPTIONS
              N parameter, VMSINSTAL does not ask you about the
              release notes. You should review the release notes
              before proceeding with the installation in case they
              contain additional information about the installation.

              If you are restarting the installation and have already
              reviewed the release notes, you do not need to specify
              OPTIONS N.

           o  Alternate root option (R)

              Lets you install the product to a system root other
              than that of the running system.

           To specify more than one option, separate the options with
           commas (OPTIONS N,R).

           VMSINSTAL has several other options; for more information,
           see the HP OpenVMS System Management Utilities Reference
           Manual section on software installation.

           The following example shows the command that runs
           VMSINSTAL to install DECforms from tape drive MTA0:
           and the system response. This example uses the OPTIONS
           N parameter to print or display release notes.

           $ @VMSINSTAL FORMSI040 MTA0: OPTIONS N

                 OpenVMS Software Product Installation Procedure V8.2-1

           It is 30-NOV-2005 at 16:46.
           Enter a question mark (?) at any time for help.

     2.5.2 Answering Installation Questions

           This section discusses the questions that appear during
           the installation. Except where noted, the questions are
           the same for both the full development kit and the run-
           time kit options. For sample installation procedures, see
           Appendix B.

           An asterisk (*) marks the beginning of each question.
           Some questions show the default response in brackets,
           for example [YES]. To choose the default response, press
           Return.

     2-4 Installing DECforms Software

 






              1. Display system status.

                 %VMSINSTAL-W-ACTIVE, The following processes are still active:
                    .
                    .
                    .
                 * Do you want to continue anyway [NO]?

                 VMSINSTAL displays a list of active processes. The
                 procedure asks whether you want to continue the
                 installation.

                 NO is the default response to the question. To stop the
                 installation, press Return. Once all active processes
                 are stopped, restart the installation procedure.

              2. Confirm system backup.

                 * Are you satisfied with the backup of your system disk [YES]?

                 Always back up your system disk before doing an
                 installation. VMSINSTAL asks whether you are satisfied
                 with your system backup. If you are satisfied with the
                 backup of your system disk, press Return. Otherwise,
                 enter NO to stop the installation. After you back up
                 your system disk, you can restart the installation.

              3. Mount the media.

                 Please mount the first volume of the set on MTA0:.
                 * Are you ready? YES
                 %MOUNT-I-MOUNTED, FORMS MOUNTED ON _$$MTA0:
                 The following products will be processed:
                   FORMSI V4.0

                     Beginning installation of FORMSI V4.0 at 15:46

                 %VMSINSTAL-I-RESTORE, Restoring product saveset A...

                 Mount the first distribution volume on the device
                 that you specified when you ran VMSIN STAL. If you
                 are installing from a directory on a disk, you will be
                 asked the following:

                 * Where will the distribution volumes be mounted:

                 Then VMSINSTAL asks whether you are ready to continue
                 the installation.

                                        Installing DECforms Software 2-5

 






              If you respond YES to indicate that you are ready,
              VMSINSTAL displays a message that the media containing
              DECforms has been mounted on the specified device and
              that the installation has begun.

              If you entered the wrong device name when you ran
              VMSINSTAL and need to restart the installation, enter
              NO in response to the "Are you ready?" question. To
              stop the installation for other reasons, press Ctrl/Y.

           4. Select a Release Notes option.

              Release notes included with this kit are always copied to SYS$HELP.

              Additional Release Notes Options:

                  1. Display release notes
                  2. Print release notes
                  3. Both 1 and 2
                  4. None of the above

              * Select option [2]:

              If you specified OPTIONS N when you ran VMSINSTAL, you
              have four options for reviewing the release notes.

              Option 1 displays the release notes immediately on the
              console terminal. To terminate the display at any time,
              press Ctrl/C.

              Option 2 prompts you for the name of the print queue
              that you want to use:

              * Queue name [SYS$PRINT]:

              Press Return to print the release notes on SYS$PRINT or
              enter a queue name and press Return. Option 2 is the
              default.

              Option 3 both displays and prints the release notes.

              Option 4 lets you select none of the above. However, HP
              does not recommend this.

           5. Continue the installation.

              * Do you want to continue the installation [N]?:  Y
              %VMSINSTAL-I-RELMOVED, Product's Release Notes have been moved to SYS$HELP.

     2-6 Installing DECforms Software

 






                 The installation procedure asks whether you want to
                 continue the installation. To continue, enter YES.
                 Otherwise, press Return. In either case, the release
                 notes are copied to the SYS$HELP:FORMSA040.RELEASE_
                 NOTES file on Alpha systems to the file SYS$HELP:FORMSI040.RELEASE_
                 NOTES on I64 systems. The software version number is
                 represented in this file name by the nnn designation
                 (040 for Version 4.0).

                ________________________Note  ________________________

                The name of the release notes file installed by
                VMSINSTAL consists of the current product name and
                version number. Do not delete previous versions of
                DECforms Release Notes.

                _____________________________________________________

              6. Install the main kit.

                 * Do you wish to install the main kit (16000 blocks) [YES]?

                 If you are installing the full development kit, the
                 procedure asks whether you want to install the main
                 kit. (The procedure omits this question if you are
                 installing the run-time kit.) The main kit contains
                 all DECforms software except the sample and demo
                 application programs and support for DEC LSE.

              7. Respond to license registration queries.

                          Product:      FORMS
                          Producer:     HP
                          Version:      4.0
                          Release Date: 11-JAN-2006

                 * Does this product have an authorization key registered and loaded? Y

                 The installation procedure displays license information
                 about your product and asks whether you have registered
                 the license for DECforms. If you have registered the
                 license for DECforms, answer YES. If you have not
                 registered the license, you must answer NO.


                                        Installing DECforms Software 2-7

 






              If you answer NO, the installation continues; however,
              if you did not register your DECforms license before
              you started the installation procedure, you cannot run
              the IVP during the installation. You should run the IVP
              after you install DECforms and register and load its
              PAK.

              Section 1.4 describes registering your DECforms license
              and Section 2.3 describes verifying the installation of
              DECforms.

           8. Choose an Installation Verification Procedure (IVP)
              option.

              * Do you want to run the IVP after the installation [YES]?

              The installation procedure asks whether you want to
              run the IVP. The IVP for DECforms verifies a successful
              installation. HP recommends that you run the IVP.

           9. Install optional DECforms software.

              * Do you wish to install Sample Application Programs (3000 blocks) [YES]?

              * Do you wish to install the demonstration package (12000 blocks) [YES]?

              * Do you wish to install LSEDIT support (250 blocks) [YES]?

              * Do you wish to install modifiable message file procedures (600 blocks)
                 [YES]?
              * Do you wish to register DECforms for Oracle TRACE support (50 blocks) [YES]?

              These five installation questions ask whether you want
              to install the following (if you are installing the
              run-time kit, the procedure omits all but the Oracle
              TRACE query):

              o  Sample application programs that demonstrate using
                 DECforms.

              o  Demonstration programs that also demonstrate using
                 DECforms.

              o  LSEDIT support that includes DEC LSE templates for
                 the DECforms Independent Form Description Language
                 (IFDL).

     2-8 Installing DECforms Software

 






                    For systems running Version 2.3 of DEC LSE software,
                    the following messages may appear when you install
                    DEC LSE support:

                    %TPU-W-NOTPUVAR, section file missing variable LSE$$HIGLIGHT
                    required by editor.
                    %FORMS-I-INSLSEEND, installation of LSE support completed

                    The warning message does not affect the DECforms
                    installation or DEC LSE support.

                 o  Modifiable message file procedures that al-
                    low you to translate DECforms run-time mes-
                    sages from English to the language of your
                    choice. DECFORMS_MESSAGE.TXT explains how to
                    use these procedures. The file is located in
                    SYS$COMMON:[SYSHLP.EXAMPLES.FORMS.MESSAGES].

                 o  Oracle TRACE support that includes a binary
                    definition of DECforms Oracle TRACE events.

             10. Purge files.

                 * Do you want to purge files replaced by this installation [YES]?

                 You can purge files from previous versions of
                 DECforms that this installation supersedes. Purging
                 is recommended.

                 To keep files from the previous version, enter NO.

        2.5.3 Informational Messages

              The installation procedure displays a number of infor-
              mational messages that report on the progress of the
              installation. There are no further questions. If the
              installation has been successful, VMSINSTAL moves the
              new or modified files to their target directories, updates
              help files, purges appropriate files, and updates DCL
              tables, if necessary. The procedure displays the following
              message:

              %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target
                 directories...

                                        Installing DECforms Software 2-9

 






     2.5.4 Running the Installation Verification Procedure

           If you chose to run the IVP, VMSINSTAL runs it now. The
           procedure displays the following messages for the full
           development kit:

           Starting DECforms V4.0 Installation Verification Procedure.
           **********************************************************.
                               DECforms V4.0

                    The Installation Verification Procedure
            Copyright 2005 Hewlett-Packard Development Company, L.P.
           ***********************************************************
           DECforms V4.0 Installation Verification Procedure beginning.
           DECforms V4.0 Installation Verification Procedure completed successfully.
           The Installation Verification Procedure has completed successfully.
           Refer to the Installation Guide for further verification procedures.

           The procedure displays the following messages for the
           run-time kit:

              Starting Installation Verification Procedure (IVP)

                     for DECforms V4.0 run-time Manager

              DECforms Interactive Installation Verification Procedure Starting.

                    [IVP panel displayed here]

              DECforms Interactive Installation Verification Procedure Complete.

              The Installation Verification Procedure has completed successfully.
              Refer to the Installation Guide for further verification procedures

           For information on running the IVP after you have
           installed DECforms, see Section 2.3.

     2.5.5 Completing the Installation Procedure

           The following messages indicate that the installation is
           complete:

           Installation of FORMS040 V4.0 completed at 17:02

           Enter the products to be processed from the next distribution volume set.
           * Products: ^Z

                  VMSINSTAL procedure done at 17:02

     2-10 Installing DECforms Software

 






              VMSINSTAL deletes or changes entries in the process symbol
              tables during the installation. Therefore, to continue to
              use the system manager's account and these symbols, log
              out and log in again.

        2.6 Error Recovery

              If errors occur during the installation or when the IVP
              is running, VMSINSTAL displays failure messages. If the
              installation fails, the procedure displays the following
              message:

              %VMSINSTAL-E-INSFAIL, The installation of DECforms V4.0 has failed.

              If the IVP fails, the procedure displays the following
              messages:

              The DECforms V4.0 Installation Verification Procedure failed.

              %VMSINSTAL-E-IVPFAIL, The IVP for DECforms V4.0 has failed.

              Errors might occur during the installation if any of the
              following conditions exists:

              o  The version of the operating system is incorrect.

              o  A required software version is incorrect.

              o  Quotas are insufficient.

              o  System parameter values are insufficient.

              o  The OpenVMS Help library is being used.

              o  The product license has not been registered and loaded.

              For descriptions of the error messages generated by these
              conditions, see the OpenVMS documentation on system
              messages and recovery procedures. Take the appropriate
              action as described in the message. (You might need to
              change a system parameter or increase an authorized quota
              value.)

              For information on installation requirements, see
              Chapter 1.

                                       Installing DECforms Software 2-11

 









                                                                       3
        ________________________________________________________________

                                      After Installing DECforms Software



              After installing DECforms software, you might need to do
              the following tasks:

              o  Edit the system startup file to include the DECforms
                 startup procedure.

              o  Access the Hebrew run-time message file.

              o  Set user account privileges and quotas.

              o  Set system parameters.

              o  Make DECforms available on each licensed node in your
                 OpenVMS Cluster system (if you are installing DECforms
                 on an OpenVMS Cluster).

              o  Install the form development utilities.

              This chapter explains how to do these tasks.

        3.1 Editing the System Startup File

              You can provide for automatic startup of DECforms
              when your system is rebooted, and define output for-
              mats for dates and times other than the standard
              OpenVMS format, by editing the system startup file,
              SYS$STARTUP:SYSTARTUP_VMS.COM.

              To cause automatic startup of DECforms, insert the
              following line in the system startup file:

              $ @SYS$STARTUP:FORMS$STARTUP.COM

              Include this line with command lines that start up other
              products. The command lines should follow the network
              startup command line, as follows:

                                  After Installing DECforms Software 3-1

 






           $ @SYS$MANAGER:STARTNET.COM
                .
                .
                .
           $ @SYS$STARTUP:FORMS$STARTUP.COM

           To have access to date and time formats other than
           the default standard formats, run a procedure named
           LIB$DT_STARTUP.COM in your system startup file. If you
           want this command procedure to define the spellings
           of non-English date and time elements, you must define
           the SYS$LANGUAGES logical name before you run the
           LIB$DT_STARTUP command procedure. The English spellings of
           date and time elements remain available.

           For example, to cause French and German spellings of date
           and time elements and alternate date and time formats, add
           the following commands to SYSTARTUP_VMS.COM:

           $ DEFINE SYS$LANGUAGES FRENCH, GERMAN
           $ @SYS$MANAGER:LIB$DT_STARTUP.COM

           You can add the definition of SYS$LANGUAGES and the
           command to run LIB$DT_STARTUP.COM directly after the
           DECforms startup command line.

           For more information on the SYS$LANGUAGES logical name
           and the LIB$DT_STARTUP command procedure, see the OpenVMS
           documentation on date and time formatting routines.

     3.2 Hebrew Installation Notes

           The DECforms installation process places the Hebrew run-
           time message
           file in:

           SYS$MESSAGE:FORMS$MSGMGRSHR_HEBREW.EXE

           The English run-time message file is found in:

           SYS$MESSAGE:FORMS$MSGMGRSHR.EXE

           DECforms uses the English message file by default. To use
           the Hebrew messages, the system manager should replace the
           English file with the Hebrew file, and then reinstall the
           image by performing @SYS$STARTUP:FORMS$STARTUP.

     3-2 After Installing DECforms Software

 






              The user also can use the logical name FORMS$MSGMGRSHR to
              point to the desired language-specific message file.

        3.3 User Account Requirements

              To use DECforms, user accounts on your system must have
              the TMPMBX and NETMBX privileges. The accounts also must
              have the quotas shown in Table 3-1.

              Table 3-1 Minimum User Account Quotas for Developing
              __________DECforms_Applications___________________________

              Account_Quota____Minimum_Value____________________________

              BYTLM            16384

              PRCLM____________3________________________________________

              User account privileges and quotas are stored in the file
              SYSUAF.DAT.

              To verify and change user account privileges and quotas,
              use the Authorize Utility as follows:

              1. Set your directory to SYS$SYSTEM and run the Authorize
                 Utility:

                 $ SET DEFAULT SYS$SYSTEM
                 $ RUN AUTHORIZE
                 UAF>

              2. To check a particular account, at the Authorize Utility
                 prompt (UAF>) enter the SHOW command with an account
                 name. For example:

                 UAF> SHOW SMITH

              3. To change a privilege or quota, enter the MODIFY
                 command in the following syntax:

                 MODIFY account-name /PRIVILEGES=privilege-name/quota-
        name=nnnn

                 The following example adds the NETMBX privilege,
                 modifies the BYTLM quota for the SMITH account, and
                 exits the utility:

                                  After Installing DECforms Software 3-3

 






              UAF> MODIFY SMITH /PRIVILEGES=NETMBX /BYTLM=16384
              UAF> EXIT

              After you exit the utility, the OpenVMS operating
              system displays messages indicating whether changes
              were made. Once you have made the changes, users must
              log out and log in again for the new privileges and
              quotas to take effect.

           For more information on modifying account privileges and
           quotas, see the HP OpenVMS System Management Utilities
           Reference Manual.

































     3-4 After Installing DECforms Software

 






        3.4 System Parameters

              Table 3-2 shows the minimum values to which certain system
              parameters should be set when users develop DECforms
              applications on your system.

              Table 3-2 Minimum System Parameter Values for Developing
              __________DECforms_Applications___________________________

              System
              Parameter________Minimum_Value____________________________

              PQL_MBYTLM       16384

              PQL_MPRCLM       3

              MAXBUF[1]        4096
              [1]This_value_applies_to_both_the_full_development_kit_and

              the run-time kit.
              __________________________________________________________

              To change system parameters, do the following:

              1. Edit the file SYS$SYSTEM:MODPARAMS.DAT.

                 To change the value of a parameter that is listed in
                 the
                 MODPARAMS.DAT file, use an editor to locate the line
                 containing that parameter. Delete the current value
                 associated with that parameter and enter the new value.

                 To add a new value, add a line to the MODPARAMS.DAT
                 file. Make sure you include both the name of the
                 parameter and its value in the new line. For ex-
                 ample, to include a setting for the PQL_MBYTLM and
                 PQL_MPRCLM parameters, add the following lines to the
                 MODPARAMS.DAT file:

                 PQL_MBYTLM=16384
                 PQL_MPRCLM=3

              2. Run the AUTOGEN procedure to recalculate your system
                 parameters.

                 After you have modified the MODPARAMS.DAT file and
                 exited the editor, enter the following command:

                 $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT

                                  After Installing DECforms Software 3-5

 






              AUTOGEN does an automatic system shutdown and reboots
              once it has finished. Rebooting your system activates
              the new parameter values. For more information about
              using AUTOGEN, see the instructions on modifying system
              parameters in the OpenVMS documentation on system
              management and operations.


     3.5 Cluster Considerations

           After you install DECforms on an OpenVMS Cluster system,
           you must do the following tasks on each licensed node in
           the OpenVMS Cluster system:

           o  Run the DECforms startup command procedure.

           o  Install DCLTABLES.EXE.

           o  Register the license for DECforms.

           o  Run the full development kit IVP (if you are installing
              the full development kit) and the run-time kit IVP.

           To run the startup command procedure, log into a node
           in the OpenVMS Cluster system and enter the following
           command:

           $ @SYS$STARTUP:FORMS$STARTUP.COM

           To install DCLTABLES.EXE, enter the following command:

           $ INSTALL REPLACE SYS$SHARE:DCLTABLES.EXE/OPEN/SHARE/HEADER

           To register the DECforms license on a node, see Section 1.4.
           To run the full development kit and run-time kit IVPs, see
           Section 2.3.

     3.6 Installing the Form Development Utilities as Shared Images

           DECforms provides the following form development
           utilities:

           o  Form Development Environment (FDE)

           o  Character-cell Panel Editor (CCPED)

           o  IFDL Translator

           o  Back Translator

           o  Extract Utility

     3-6 After Installing DECforms Software

 






              o  Test Utility

              o  FMS Converter (Supported only on Alpha)

              If you use these form development utilities extensively
              on your system, you can install them as shared images to
              reduce the system overhead and memory requirements.

              To install the form development utilities as shared
              images, do the following:

              1. Determine the number of available global pages and
                 global sections on your system.

                 To install the form development utilities as shared
                 images, you must increase the number of global pages by
                 6000 and the number of global sections by 30. These are
                 increases over what is required during installation.
                 Install the utilities just after you start your system.
                 The available space in the global page table is less
                 likely to be fragmented.

              2. To install the form development utilities as shared
                 images on a currently running system, enter the
                 following command:

                 $ @SYS$STARTUP:FORMS$STARTUP.COM  DEVELOP

                 To install the utilities as shared images each time
                 your system is rebooted, add the DEVELOP parameter
                 to the line you added to the system startup file,
                 SYS$STARTUP:SYSTARTUP_VMS.COM (see Section 3.1), as
                 follows:

                 $ @SYS$MANAGER:STARTNET.COM
                      .
                      .
                      .
                 $ @SYS$STARTUP:FORMS$STARTUP.COM  DEVELOP

              To install selected form utilities, use the OpenVMS
              Install Utility (INSTALL). For example, to install only
              the Character-cell Panel Editor as a shared image, enter
              the following commands:

                                  After Installing DECforms Software 3-7

 






           $ INSTALL
           INSTALL> ADD SYS$LIBRARY:FORMS$FSESHR.EXE /OPEN /SHARED /HEADER
           INSTALL> ADD SYS$LIBRARY:FORMS$PEDSHR.EXE /OPEN /SHARED /HEADER
           INSTALL> ADD SYS$MESSAGE:FORMS$MSGPRDSHR.EXE /OPEN /SHARED /HEADER
           INSTALL> ADD SYS$LIBRARY:FORMS$PEDVTEXEC.EXE /OPEN /SHARED /HEADER
           INSTALL> EXIT

              ________________________Note ________________________

              You must install FORMS$FSESHR.EXE and FORMS$MSGPRDSHR.EXE
              with the first form development utility that you
              install. Once you have installed these two images,
              you need not reinstall them to add other form
              development utilities.

              _____________________________________________________

     3.7 Determining and Reporting Problems

           If an error occurs while DECforms is being used and you
           believe that a problem with DECforms is causing the error,
           take one of the following actions:

           o  If you have a BASIC or DECsupport Software Agreement,
              call your Customer Support Center.

           o  If you have a Self-Maintenance Software Agreement,
              submit a Software Performance Report (SPR).

           o  If you purchased DECforms within the past 90 days and
              you think a software error is causing the error, submit
              an SPR.

           If you find an error in the DECforms documentation, please
           see the Send Us Your Comments section in the Preface for
           instructions.









     3-8 After Installing DECforms Software

 









                                                                       A
        ________________________________________________________________

                                       Alpha Systems Sample Installation



              This appendix contains a sample installation of HP
              DECforms software. Depending on which layered products
              you have on your system, you might see additional messages
              and questions when you install HP DECforms software.

              The sample installation assumes the following:

              o  DECnet has been shut down.[1]

              o  No users are logged in to the system.

              o  The installation kit is in SYS$UPDATE.

              o  OPTIONS N is specified during the full development kit
                 installation to print the release notes, but not during
                 the run-time kit installation.

              o  The Installation Verification Procedure (IVP) runs
                 after each kit has been installed.










              ___________________
              [1]Although it is not necessary to shut down DECnet to
                 perform a successful DECforms installation, VMSINSTAL

                 checks to see if DECnet is shut down.

                                   Alpha Systems Sample Installation A-1

 






     A.1 Full Development Kit for English Variant of DECforms

           Example A-1 contains a sample installation for the
           DECforms full development kit on an Alpha system.

     Example A-1 Alpha Sample Full Development Kit Installation

     $ @sys$update:vmsinstal FORMSA040

             OpenVMS  Software Product Installation Procedure V8.2

     It is 1-DEC-2005 at 16:05.

     Enter a question mark (?) at any time for help.

     %VMSINSTAL-W-ACTIVE, The following processes are still active:
            TCPIP$FTP_1
            FORMS
            BATCH_181
     * Do you want to continue anyway [NO]? yes
     * Are you satisfied with the backup of your system disk [YES]?
     * Where will the distribution volumes be mounted: MYDISK:[MYDIRECTORY]
     * Enter installation options you wish to use (none):

     The following products will be processed:

       FORMSA V4.0

             Beginning installation of FORMSA V4.0 at 16:06

     %VMSINSTAL-I-RESTORE, Restoring product save set A ...
     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

         **********************************************************************
         *                                                                    *
         *                    D E C f o r m s    V 4 . 0                      *
         *                ====================================                *
         *                                                                    *
         *                      Full Development Kit                          *
         *                                                                    *
         *       Copyright 2005 Hewlett-Packard Development Company, L.P.     *
         *                                                                    *
         **********************************************************************

                                             (continued on next page)

     A-2 Alpha Systems Sample Installation

 






        Example A-1 (Cont.) Alpha Sample Full Development Kit Installation


            *********************************************************************

              The installation of this kit will supersede any prior version of
                        DECforms that may be installed on this system.

            *********************************************************************

        * Do you wish to install the main kit (16000 blocks) [YES]?

                Product:      FORMS
                Producer:     HP
                Version:      4.0
                Release Date: 11-JAN-2006

        * Does this product have an authorization key registered and loaded? yes

             This kit contains an Installation Verification Procedure (IVP)
             to  verify the correct installation of DECforms.  It can be run
             prior to the conclusion of this procedure by answering "YES" to
             the IVP prompt or invoked after the installation as follows:
               @SYS$TEST:FORMS$IVP.COM

        * Do you want to run the IVP after the installation [YES]?

        * Do you wish to install Sample Application Programs (3000 blocks) [YES]?

        * Do you wish to install the demonstration package (12000 blocks) [YES]?

        * Do you wish to install LSEDIT support (250 blocks) [YES]?

        * Do you wish to install modifiable message file procedures (600 blocks) [YES]?

        * Do you wish to register DECforms for Oracle TRACE support (50 blocks) [YES]?

        * Do you want to purge files replaced by this installation [YES]?

            The remainder of the installation is expected to take between
            5 and 35 minutes.

            No further questions will be asked during this installation.

        %FORMSA-I-MAINKITBEGIN, Restoring main kit.
        %VMSINSTAL-I-RESTORE, Restoring product save set B ...
        %FORMSA-I-MAINKITEND, Main kit restored.

                                                (continued on next page)

                                   Alpha Systems Sample Installation A-3

 






     Example A-1 (Cont.) Alpha Sample Full Development Kit Installation

     %FORMSA-I-SMPKITSTART, Restoring Sample Application package.
     %VMSINSTAL-I-RESTORE, Restoring product save set C ...
     %FORMSA-I-SMPKITEND, Sample Application package restored.

     %FORMSA-I-DEMKITSTART, Restoring Demonstration Package.
     %VMSINSTAL-I-RESTORE, Restoring product save set D ...
     %FORMSA-I-DEMKITEND, Demonstration Package restored.

         *************************************************************

         Oracle TRACE has not been installed. Now storing the FORMS
         facility definition into sys$share:epc$facility.tlb.
         After installing Oracle TRACE, the facility definition
         may be placed in the Oracle TRACE administration database
         Please refer to the Oracle TRACE User's guide for instructions
         on how to insert binary facility definitions into the
         Oracle TRACE administration database.

         *************************************************************
     %FORMSA-I-TRACEADDED, DECforms Oracle TRACE definition successfully added
     to the Oracle TRACE Registrar.
     %FORMSA-I-INSMAINSTART,   Beginning installation of main kit.
     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSTEST.FORMS].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.FORMS] already exists
     %FORMSA-I-INSMAINEND,   Installation of main kit complete.

     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSHLP.EXAMPLES.FORMS].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.FORMS] already exists
     %FORMSA-I-INSSMPSTART,   Beginning installation of Sample Application.
     %FORMSA-I-INSSMPEND,   Installation of Sample Application complete.

     %FORMSA-I-INSDEMSTART,   Beginning installation of Demonstration Package.
     %FORMSA-I-INSDEMEND,   Installation of Demonstration Package completed..

     %FORMSA-I-INSLSESTART,   Beginning installation of LSEDIT support.
     %TPU-S-SAVEENV, environment written to
     LIBRTY$DKB200:[SYS0.SYSUPD.FORMSA040]LSE1
     %FORMSA-I-INSLSEEND,   Installation of LSEDIT support completed.

                                             (continued on next page)

     A-4 Alpha Systems Sample Installation

 






        Example A-1 (Cont.) Alpha Sample Full Development Kit Installation

        %FORMSA-I-INSDEMSTART,  Beginning installation of message support.
        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
        VMI$ROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES].
        %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES] already exists
        %FORMSA-I-INSDEMEND,   Installation of message support completed.

            All files installed have names beginning with the product
            facility code (FORMS$).
            The following system areas are updated by this installation:

                [SYSEXE]                - added FORMS$*.EXE
                [SYSLIB]                - added FORMS$*.EXE files
                                        - added language definition files
                [SYSHLP]                - added Forms component help files
                [SYSMSG]                - added message files
                [SYS$STARTUP]           - added FORMS$STARTUP.COM
                [DECW$DEFAULTS]         - added Forms development environment
                                          initialization files.
                [SYSTEST]               - added IVP procedures
                [SYSTEST.FORMS]         - added IVP files

                [SYSHLP.EXAMPLES.FORMS] - added sample application files
                [SYSHLP.EXAMPLES.FORMS] - added Demonstration Package
                [SYSHLP.EXAMPLES.FORMS.MESSAGES] - added modifiable message file
                                                   procedures

            These files are modified:

                [SYSLIB]STARLET.OLB      for FORMS$MGR_OBJECT_TABLES*.OBJ
                [SYSLIB]IMAGELIB.OLB     for FORMS$MANAGER.EXE
                [SYSLIB]DCLTABLES.EXE    for FORMS$DCL_COMMAND_TABLE.CLD
                [SYSHLP]HELPLIB.LIB      for Forms help
                [SYSLIB]LSE$SYSTEM_ENVIRONMENT.ENV for Forms IFDL environment
                [SYSLIB]EPC$FACILITY.TLB for Forms OracleTRACE facility definition.

             The final part of the installation process will now occur.
             Upon completion of this installation, please be sure to edit the
             system startup file in order to run FORMS$STARTUP.COM

             Please read the release notes before using DECforms. They contain
             important information for this release.

                                                (continued on next page)

                                   Alpha Systems Sample Installation A-5

 






     Example A-1 (Cont.) Alpha Sample Full Development Kit Installation

          They are located in SYS$HELP:FORMSA040.RELEASE_NOTES.

     %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Starting DECforms V4.0 Installation Verification Procedure.

        **************************************************************************
        ***                                                                    ***
        ***                             DECforms V4.0                          ***
        ***                                                                    ***
        ***                  Installation Verification Procedure               ***
        ***                                                                    ***
        ***                                                                    ***
        ***       Copyright 2005 Hewlett-Packard Development Company, L.P.     ***
        ***                                                                    ***
        ***                                                                    ***
        **************************************************************************

     DECforms V4.0 Installation Verification Procedure beginning.
     DECforms V4.0 Installation Verification Procedure completed successfully.

         The Installation Verification Procedure has completed successfully.
         Refer to the Installation Guide for further verification procedures

             Installation of FORMSA V4.0 completed at 16:08

         Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

         Creating installation data file: VMI$ROOT:[SYSUPD]FORMSA040.VMI_DATA

             VMSINSTAL procedure done at 16:09

     $

     A.2 Run-Time Kit for English Variant of DECforms

           Example A-2 contains a sample installation for the
           DECforms run-time kit.





     A-6 Alpha Systems Sample Installation

 






        Example A-2 Alpha Sample Run-Time Kit Installation for English
                    Variant

        $ @sys$update:vmsinstal FORMSRTA040


                OpenVMS  Software Product Installation Procedure V8.2

        It is 1-DEC-2005 at 16:14.

        Enter a question mark (?) at any time for help.

        %VMSINSTAL-W-ACTIVE, The following processes are still active:
               TCPIP$FTP_1
               FORMS
               BATCH_181
        * Do you want to continue anyway [NO]? yes
        * Are you satisfied with the backup of your system disk [YES]?
        * Where will the distribution volumes be mounted: MYDISK:[MYDIRECTORY]
        * Enter installation options you wish to use (none):

        The following products will be processed:

          FORMSRTA V4.0

                Beginning installation of FORMSRTA V4.0 at 16:15

        %VMSINSTAL-I-RESTORE, Restoring product save set A ...
        %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

            **********************************************************************
            *                                                                    *
            *                 H P     D E C f o r m s    V 4 . 0                 *
            *             =========================================              *
            *                           Runtime Kit                              *
            *                                                                    *
            *       Copyright 2005 Hewlett-Packard Development Company, L.P      *
            *                                                                    *
            **********************************************************************

                                                (continued on next page)




                                   Alpha Systems Sample Installation A-7

 






     Example A-2 (Cont.) Alpha Sample Run-Time Kit Installation for
                         English Variant

             Product:      FORMS-RT
             Producer:     HP
             Version:      4.0
             Release Date: 11-JAN-2006

     * Does this product have an authorization key registered and loaded? yes

          This kit contains an Installation Verification Procedure (IVP)
          to  verify the correct installation of DECforms. Because the
          IVP requires interactive operator input, it must be run using a
          VT100, VT200, VT300, VT400, or VT500 compatible video terminal.
          If you are using one of these terminal types, you may run the
          procedure immediately after installation by answering "YES" to
          the IVP prompt. Or you may choose to invoke it later using
          the following:  @SYS$TEST:FORMS$RT_IVP.COM

     * Do you want to run the IVP after the installation [YES]?

     * Do you wish to register DECforms for Oracle TRACE support (50 blocks) [YES]?
         *************************************************************

         Oracle TRACE has not been installed. Now storing the FORMS
         facility definition into sys$share:epc$facility.tlb.
         After installing Oracle TRACE, the facility definition
         may be placed in the Oracle TRACE administration database
         Please refer to the Oracle TRACE User's guide for instructions
         on how to insert binary facility definitions into the
         Oracle TRACE administration database.

         *************************************************************
     %FORMSRTA-I-TRACEADDED, DECforms Oracle TRACE definition successfully added to.

     * Do you want to purge files replaced by this installation [YES]?

         No further questions will be asked during this installation.

     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSTEST.FORMS].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.FORMS] already exists

          The following files are added by this installation:

                                             (continued on next page)

     A-8 Alpha Systems Sample Installation

 






        Example A-2 (Cont.) Alpha Sample Run-Time Kit Installation for
                            English Variant

             SYS$LIBRARY:FORMS$MANAGER.EXE
             SYS$LIBRARY:FORMS$SDA.EXE
             SYS$LIBRARY:FORMS$MGRXMSHR.EXE
             SYS$LIBRARY:FORMS$MGRDDIFSHR.EXE
             SYS$LIBRARY:FORMS$CIOSHR.EXE
             SYS$LIBRARY:FORMS$PORTABLE_API.EXE
        +               DECforms Installation Verification Procedure                   +
        +------------------------------------------------------------------------------+

            If you are reading this panel, it indicates that DECforms has

            successfully Enabled a form.

            Press Ctrl/Z or F10 to complete the Installation Verification

            Procedure.  If you do not receive any failure messages, the

           Procedure has successfully disabled this form.

        +------------------------------------------------------------------------------+

           The Installation Verification Procedure has  completed successfully.
           Refer to the Installation Guide for further verification procedures

                Installation of FORMSRTA V4.0 completed at 16:17

            Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

            Creating installation data file: VMI$ROOT:[SYSUPD]FORMSRTA040.VMI_DATA

                VMSINSTAL procedure done at 16:17
        $

        A.3 Full Development Kit for Asian Variant of DECforms

              Example A-3 contains a sample installation for the
              DECforms full development kit on an Alpha system.





                                   Alpha Systems Sample Installation A-9

 






     Example A-3 Alpha Sample Full Development Kit Installation

     $ @sys$update:vmsinstal FORMSAAN040



             OpenVMS  Software Product Installation Procedure V8.2

     It is 5-DEC-2005 at 05:27.

     Enter a question mark (?) at any time for help.

     %VMSINSTAL-W-ACTIVE, The following processes are still active:
            TCPIP$FTP_1
            FORMS
            BATCH_24
     * Do you want to continue anyway [NO]? yes
     * Are you satisfied with the backup of your system disk [YES]?
     * Where will the distribution volumes be mounted: MYDISK:[MYDIRECTORY]
     * Enter installation options you wish to use (none):

     The following products will be processed:

       FORMSAAN V4.0

             Beginning installation of FORMSAAN V4.0 at 05:28

     %VMSINSTAL-I-RESTORE, Restoring product save set A ...
     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

         **********************************************************************
         *                                                                    *
         *                    D E C f o r m s    V 4 . 0                      *
         *                ====================================                *
         *                      Full Development Kit                          *
         *                                                                    *
         *       Copyright 2005 Hewlett-Packard Development Company, L.P.     *
         *                                                                    *
         *                                                                    *
         **********************************************************************

         ******************************************************************

          The installation of this kit will supersede any prior version of
          DECforms that may be installed on this system.

                                             (continued on next page)

     A-10 Alpha Systems Sample Installation

 






        Example A-3 (Cont.) Alpha Sample Full Development Kit Installation

            ******************************************************************

        * Do you wish to install the main kit (16600 blocks) [YES]?

            DECforms supports following additional languages.

            HANZI, HANYU, HANGUL, KANJI

            You can install ONE of additional language support.
            However, to run DECforms with additional language support,
            make sure you have associate license,
            localized operating systems and terminals.

        * Do you wish to install additional language support (5000 blocks) [YES]?

            1. HANZI    Simplified Chinese support
            2. HANYU    Traditional Chinese support
            3. HANGUL   Korean support
            4. KANJI    Japanese support

            0. NONE     skip additional language support

        * Which language support do you wish to install ?  [4]: 1
        %FORMSAAN-I-SLCTLANG, Selected language is HANZI

                Product:      FORMS-UI-HANZI
                Producer:     HP
                Version:      V4.0
                Release Date: 11-JAN-2006

        * Does this product have an authorization key registered and loaded? yes

                   This kit contains an Installation Verification Procedure (IVP)
                   to  verify the correct installation of DECforms.
                   It can be run prior to the conclusion of this
                   procedure by answering "YES" to the IVP prompt or invoked
                   after the installation as follows:

                   @SYS$TEST:FORMS$IVP.COM

        * Do you want to run the IVP after the installation [YES]?

        * Do you wish to install Sample Application Programs (3000 blocks) [YES]?

        * Do you wish to install the demonstration package (12000 blocks) [YES]?

                                                (continued on next page)

                                  Alpha Systems Sample Installation A-11

 






     Example A-3 (Cont.) Alpha Sample Full Development Kit Installation

     * Do you wish to install LSEDIT support (250 blocks) [YES]?

     * Do you wish to install modifiable message file procedures (600 blocks) [YES]?

     * Do you wish to register DECforms for Oracle TRACE support (50 blocks) [YES]?

     * Do you want to purge files replaced by this installation [YES]?

       The remainder of the installation is expected to take between
       5 and 35 minutes.

       No further questions will be asked during this installation.

     %FORMSAAN-I-MAINKITBEGIN, restoring main kit.
     %VMSINSTAL-I-RESTORE, Restoring product save set B ...
     %FORMSAAN-I-MAINKITEND, main kit restored.

     %FORMSAAN-I-LANGKITBEGIN, restoring language kit.
     %VMSINSTAL-I-RESTORE, Restoring product save set C ...
     %FORMSAAN-I-LANGKITEND, language kit restored.

     %FORMSAAN-I-SMPKITSTART, restoring Sample Application package.
     %VMSINSTAL-I-RESTORE, Restoring product save set H ...
     %FORMSAAN-I-SMPKITEND, Sample Application package restored.

     %FORMSAAN-I-DEMKITSTART, restoring Demonstration Package.
     %VMSINSTAL-I-RESTORE, Restoring product save set I ...
     %FORMSAAN-I-DEMKITEND, Demonstration Package restored.

         *************************************************************

         Oracle TRACE has not been installed. Now storing the FORMS
         facility definition into sys$share:epc$facility.tlb.
         After installing Oracle TRACE, the facility definition
         may be placed in the Oracle TRACE administration database
         Please refer to the Oracle TRACE User's guide for instructions
         on how to insert binary facility definitions into the
         Oracle TRACE administration database.

                                             (continued on next page)



     A-12 Alpha Systems Sample Installation

 






        Example A-3 (Cont.) Alpha Sample Full Development Kit Installation

            *************************************************************
        %FORMSAAN-I-TRACEADDED, DECforms Oracle TRACE definition successfully added
        to the Oracle TRACE registrar.
        %FORMSAAN-I-INSMAINSTART, beginning installation of main kit.
        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
        VMI$ROOT:[SYSTE
        ST.FORMS].
        %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.FORMS] already exists
        %FORMSAAN-I-INSMAINEND, installation of main kit complete.

        %FORMSAAN-I-INSLANGSTART, beginning installation of language kit.
        %FORMSAAN-I-HELP_DIR_MISSING, The directory for language specific HELP file is
        -FORMSAAN-I-HELP_DIR_MISSING, missing on your system.
        -FORMSAAN-I-HELP_DIR_MISSING, The help files will not be provided.
        %FORMSAAN-I-CONTINUE, The installation procedure is continuing...

          This installation defines your selected language as system wide.
          If you wish to change the language,
          please edit SYS$STARTUP:FORMS$STARTUP.COM,
          modify the following line to your language and execute the procedure.

            $ DEFINE/SYSTEM/EXEC/NOLOG FORMS$SYS_LANGUAGE "HANZI"

        %FORMSAAN-I-INSLANGEND, installation of language kit complete.

        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
        VMI$ROOT:[SYSHL
        P.EXAMPLES.FORMS].
        %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.FORMS] already exists
        %FORMSAAN-I-INSSMPSTART, beginning installation of Sample Application.
        %FORMSAAN-I-INSSMPEND, installation of Sample Application complete.

        %FORMSAAN-I-INSDEMSTART, beginning installation of Demonstration Package.
        %FORMSAAN-I-INSDEMEND, installation of Demonstration Package completed..

        %FORMSAAN-I-INSLSESTART, beginning installation of LSEDIT support.
        %TPU-S-SAVEENV, environment written to
        LIBRTY$DKB200:[SYS0.SYSUPD.FORMSAAN040]LS
        E$SYSTEM_ENVIRONMENT.ENV;1
        %FORMSAAN-I-INSLSEEND, installation of LSEDIT support completed.

                                                (continued on next page)

                                  Alpha Systems Sample Installation A-13

 






     Example A-3 (Cont.) Alpha Sample Full Development Kit Installation

     %FORMSAAN-I-INSDEMSTART, beginning installation of message support.
     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSHL
     P.EXAMPLES.FORMS.MESSAGES].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES] already exists
     %FORMSAAN-I-INSDEMEND, installation of message support completed.

       All files installed have names beginning with the product
       facility code (FORMS$).
       The following system areas are updated by this installation:

             [SYSEXE]                - added FORMS$*.EXE
             [SYSLIB]                - added FORMS$*.EXE files
                                     - added language definition files
             [SYSHLP]                - added Forms component help files
             [SYSMSG]                - added message files
             [SYS$STARTUP]           - added FORMS$STARTUP.COM
             [DECW$DEFAULTS]         - added Forms development environment
                                       initialization files
             [SYSTEST]               - added IVP procedures
             [SYSTEST.FORMS]         - added IVP files

             [SYSHLP.EXAMPLES.FORMS] - added sample application files
             [SYSHLP.EXAMPLES.FORMS] - added Demonstration Package
             [SYSHLP.EXAMPLES.FORMS.MESSAGES] - added modifiable message file
                                                procedures

       These files are modified:

             [SYSLIB]STARLET.OLB      for FORMS$MGR_OBJECT_TABLES*.OBJ
             [SYSLIB]IMAGELIB.OLB     for FORMS$MANAGER.EXE
             [SYSLIB]DCLTABLES.EXE    for FORMS$DCL_COMMAND_TABLE.CLD
             [SYSHLP]HELPLIB.LIB      for Forms help
             [SYSLIB]LSE$SYSTEM_ENVIRONMENT.ENV for Forms IFDL environment
             [SYSLIB]EPC$FACILITY.TLB for Forms OracleTRACE facility definition.

       The final part of the installation process will now occur.
       Upon completion of this installation, please be sure to edit the system
       startup file in order to run FORMS$STARTUP.COM

      Please read the release notes before using DECforms. These contain important
      information for this release.

                                             (continued on next page)

     A-14 Alpha Systems Sample Installation

 






        Example A-3 (Cont.) Alpha Sample Full Development Kit Installation

          These are in SYS$HELP:FORMSAAN040.RELEASE_NOTES.

        %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Starting DECforms V4.0 Installation Verification Procedure.

           **************************************************************************
           ***                                                                    ***
           ***                             DECforms V4.0                          ***
           ***                                                                    ***
           ***                  Installation Verification Procedure               ***
           ***                                                                    ***
           ***                                                                    ***
           ***       Copyright 2005 Hewlett-Packard Development Company, L.P.     ***
           ***                                                                    ***
           ***                                                                    ***
           **************************************************************************

        DECforms V4.0 Installation Verification Procedure beginning.
        DECforms V4.0 Installation Verification Procedure completed successfully.

          The Installation Verification Procedure has completed successfully.
          Refer to the Installation Guide for further verification procedures

                Installation of FORMSAAN V4.0 completed at 05:31

            Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

            Creating installation data file: VMI$ROOT:[SYSUPD]FORMSAAN040.VMI_DATA

                VMSINSTAL procedure done at 05:31
        $

        A.4 Run-Time Kit for Asian Variant of DECforms

              Example A-4 contains a sample installation for the
              DECforms full development kit on an Alpha system.

        Example A-4 Alpha Sample Full Development Kit Installation

                                                (continued on next page)


                                  Alpha Systems Sample Installation A-15

 






     Example A-4 (Cont.) Alpha Sample Full Development Kit Installation

     $ @sys$update:vmsinstal FORMSRTAAN040


             OpenVMS  Software Product Installation Procedure V8.2

     It is 5-DEC-2005 at 05:37.

     Enter a question mark (?) at any time for help.

     %VMSINSTAL-W-ACTIVE, The following processes are still active:
            TCPIP$FTP_1
            FORMS
            BATCH_24
     * Do you want to continue anyway [NO]? yes
     * Are you satisfied with the backup of your system disk [YES]?
     * Where will the distribution volumes be mounted: MYDISK:[MYDIRECTORY]

     * Enter installation options you wish to use (none):

     The following products will be processed:

       FORMSRTAAN V4.0

             Beginning installation of FORMSRTAAN V4.0 at 05:37

     %VMSINSTAL-I-RESTORE, Restoring product save set A ...
     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

         **********************************************************************
         *                                                                    *
         *                 H P   D E C f o r m s    V 4 . 0                   *
         *             =========================================              *
         *                           Runtime Kit                              *
         *                                                                    *
         *        Copyright 2005 Hewlett-Packard Development Company, L.P.   *
         *                                                                    *
         *                                                                    *
         **********************************************************************

         DECforms supports following additional languages.

         HANZI, HANYU, HANGUL, KANJI

                                             (continued on next page)

     A-16 Alpha Systems Sample Installation

 






        Example A-4 (Cont.) Alpha Sample Full Development Kit Installation

            You can install ONE of additional language support.
            However, to run DECforms with additional language support,
            make sure you have associate license,
            localized operating systems and terminals.

        * Do you wish to install additional language support (200 blocks) [YES]?

            1. HANZI    Simplified Chinese support
            2. HANYU    Traditional Chinese support
            3. HANGUL   Korean support
            4. KANJI    Japanese support

            0. NONE     skip additional language support

        * Which language support do you wish to install ?  [4]: 1
        %FORMSRTAAN-I-SLCTLANG, Selected language is HANZI

                Product:      FORMS-RT-UI-HANZI
                Producer:     HP
                Version:      V4.0
                Release Date: 11-JAN-2006

        * Does this product have an authorization key registered and loaded? yes

                   This kit contains an Installation Verification Procedure (IVP)
                   to  verify the correct installation of DECforms.
                   Because the IVP requires interactive operator input, it
                   must be run using a VT100, VT200, VT300, VT400, or VT500
                   compatible video terminal. If you are using one of these
                   terminal types, you may run the procedure immediately after
                   installation by answering "YES" to the IVP prompt. Or
                   you may choose to invoke it later using the following:

                           @SYS$TEST:FORMS$RT_IVP.COM

        * Do you want to run the IVP after the installation [YES]?

        * Do you wish to register DECforms for Oracle TRACE support ( blocks) [YES]?
            *************************************************************

                                                (continued on next page)


                                  Alpha Systems Sample Installation A-17

 






     Example A-4 (Cont.) Alpha Sample Full Development Kit Installation

         Oracle TRACE has not been installed. Now storing the FORMS
         facility definition into sys$share:epc$facility.tlb.
         After installing Oracle TRACE, the facility definition
         may be placed in the Oracle TRACE administration database
         Please refer to the Oracle TRACE User's guide for instructions
         on how to insert binary facility definitions into the
         Oracle TRACE administration database.

         *************************************************************
     %FORMSRTAAN-I-TRACEADDED, DECforms Oracle TRACE definition successfully added
     to the Oracle TRACE registrar.

     * Do you want to purge files replaced by this installation [YES]?

       No further questions will be asked during this installation.

       This installation defines your selected language as system wide.
       If you wish to change the language,
       please edit SYS$STARTUP:FORMS$STARTUP.COM,
       modify the following line to your language and execute the procedure.

         $ DEFINE/SYSTEM/EXEC/NOLOG FORMS$SYS_LANGUAGE "HANZI"

     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSTE
     ST.FORMS].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.FORMS] already exists

                The following files are added by this installation:

                                             (continued on next page)












     A-18 Alpha Systems Sample Installation

 






        Example A-4 (Cont.) Alpha Sample Full Development Kit Installation

                   SYS$LIBRARY:FORMS$MANAGER.EXE
                   SYS$LIBRARY:FORMS$MGRACCSHR.EXE
                   SYS$LIBRARY:FORMS$MGRXMSHR.EXE
                   SYS$LIBRARY:FORMS$MGRDDIFSHR.EXE
                   SYS$LIBRARY:FORMS$CIOSHR.EXE
                   SYS$LIBRARY:FORMS$PORTABLE_API.EXE
                   SYS$LIBRARY:FORMS$HANZISHR.EXE
                   SYS$MESSAGE:FORMS$MSGMGRSHR.EXE
                   SYS$MESSAGE:FORMS$MSGMGRSHR_HEBREW.EXE
                   SYS$MESSAGE:FORMS$MSGMGRSHR_HANZI.EXE
                   SYS$STARTUP:FORMS$STARTUP.COM
                   SYS$TEST:FORMS$RT_IVP.COM
                   SYS$COMMON:[SYSTEST.FORMS]FORMS$RT_IVP.EXE

                   The following files have been updated:

                   SYS$LIBRARY:STARLET.OLB (inserted FORMS$MGR_OBJECT_TABLES*.OBJ)
                   SYS$LIBRARY:IMAGELIB.OLB (inserted FORMS$MANAGER.EXE)
        %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Starting Installation Verification Procedure (IVP)

               for DECforms V4.0 run-time Manager

        +          DECforms Installation Verification Procedure                       +
        +-----------------------------------------------------------------------------+
            If you are reading this panel, it indicates that DECforms has

            successfully Enabled a form.

            Press Ctrl/Z or F10 to complete the Installation Verification

            Procedure.  If you do not receive any failure messages, the

            Procedure has successfully disabled this form.
        +------------------------------------------------------------------------------+

          The Installation Verification Procedure has completed successfully.
          Refer to the Installation Guide for further verification procedures

                Installation of FORMSRTAAN V4.0 completed at 05:38

            Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

                                                (continued on next page)

                                  Alpha Systems Sample Installation A-19

 






     Example A-4 (Cont.) Alpha Sample Full Development Kit Installation

         Creating installation data file: VMI$ROOT:[SYSUPD]FORMSRTAAN040.VMI_DATA

             VMSINSTAL procedure done at 05:38

     $






































     A-20 Alpha Systems Sample Installation

 









                                                                       B
        ________________________________________________________________

                                         I64 Systems Sample Installation



              This appendix contains a sample installation of HP
              DECforms software. Depending on which layered products
              you have on your system, you might see additional messages
              and questions when you install HP DECforms software.

              The sample installation assumes the following:

              o  DECnet has been shut down.[1]

              o  No users are logged in to the system.

              o  The installation kit is in SYS$UPDATE.

              o  OPTIONS N is specified during the full development kit
                 installation to print the release notes, but not during
                 the run-time kit installation.

              o  The Installation Verification Procedure (IVP) runs
                 after each kit has been installed.










              ___________________
              [1]Although it is not necessary to shut down DECnet to
                 perform a successful DECforms installation, VMSINSTAL

                 checks to see if DECnet is shut down.

                                     I64 Systems Sample Installation B-1

 






     B.1 Full Development Kit for English Variant of DECforms

           Example B-1 contains a sample installation for the full
           development kit of the English variant of DECforms.

     Example B-1 I64 Sample Full Development Kit Installation

     $ @sys$update:vmsinstal FORMSI040

             OpenVMS  Software Product Installation Procedure V8.2-1

     It is 1-DEC-2005 at 13:01.

     Enter a question mark (?) at any time for help.

     %VMSINSTAL-W-ACTIVE, The following processes are still active:
            TCPIP$FTP_1
            BLD$UPDATECHK

     * Do you want to continue anyway [NO]? yes
     * Are you satisfied with the backup of your system disk [YES]?
     * Where will the distribution volumes be mounted: MYDISK:[MYDIRECTORY]
     * Enter installation options you wish to use (none):

     The following products will be processed:

       FORMSI V4.0

             Beginning installation of FORMSI V4.0 at 13:02

     %VMSINSTAL-I-RESTORE, Restoring product save set A ...
     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

         **********************************************************************
         *                                                                    *
         *                    D E C f o r m s    V 4 . 0                      *
         *                ====================================                *
         *                      Full Development Kit                          *
         *                                                                    *
         *       Copyright 2005 Hewlett-Packard Development Company, L.P.     *
         *                                                                    *
         *                                                                    *
         **********************************************************************

                                             (continued on next page)

     B-2 I64 Systems Sample Installation

 






        Example B-1 (Cont.) I64 Sample Full Development Kit Installation

            *********************************************************************

              The installation of this kit will supersede any prior version of
                        DECforms that may be installed on this system.

            *********************************************************************

        * Do you wish to install the main kit (16000 blocks) [YES]?

                Product:      FORMS
                Producer:     HP
                Version:      4.0
                Release Date: 11-JAN-2006

        * Does this product have an authorization key registered and loaded? yes

             This kit contains an Installation Verification Procedure (IVP)
             to  verify the correct installation of DECforms.  It can be run
             prior to the conclusion of this procedure by answering "YES" to
             the IVP prompt or invoked after the installation as follows:
               @SYS$TEST:FORMS$IVP.COM

        * Do you want to run the IVP after the installation [YES]?

        * Do you wish to install Sample Application Programs (3000 blocks) [YES]?

        * Do you wish to install the demonstration package (12000 blocks) [YES]?

        * Do you wish to install LSEDIT support (250 blocks) [YES]?

        * Do you wish to install modifiable message file procedures (600 blocks) [YES]?

        * Do you wish to register DECforms for Oracle TRACE support (50 blocks) [YES]?

        * Do you want to purge files replaced by this installation [YES]?

            The remainder of the installation is expected to take between
            5 and 35 minutes.

            No further questions will be asked during this installation.

        %FORMSI-I-MAINKITBEGIN, Restoring main kit.
        %VMSINSTAL-I-RESTORE, Restoring product save set B ...
        %FORMSI-I-MAINKITEND, Main kit restored.

                                                (continued on next page)

                                     I64 Systems Sample Installation B-3

 






     Example B-1 (Cont.) I64 Sample Full Development Kit Installation

     %FORMSI-I-SMPKITSTART, Restoring Sample Application package.
     %VMSINSTAL-I-RESTORE, Restoring product save set C ...
     %FORMSI-I-SMPKITEND, Sample Application package restored.

     %FORMSI-I-DEMKITSTART, Restoring Demonstration Package.
     %VMSINSTAL-I-RESTORE, Restoring product save set D ...
     %FORMSI-I-DEMKITEND, Demonstration Package restored.

         *************************************************************

         Oracle TRACE has not been installed. Now storing the FORMS
         facility definition into sys$share:epc$facility.tlb.
         After installing Oracle TRACE, the facility definition
         may be placed in the Oracle TRACE administration database
         Please refer to the Oracle TRACE User's guide for instructions
         on how to insert binary facility definitions into the
         Oracle TRACE administration database.

         *************************************************************
     %FORMSI-I-TRACEADDED, DECforms Oracle TRACE definition successfully added to
     the Oracle TRACE Registrar.
     %FORMSI-I-INSMAINSTART,   Beginning installation of main kit.
     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSTEST.FORMS].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.FORMS] already exists
     %FORMSI-I-INSMAINEND,   Installation of main kit complete.

     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSHLP.EXAMPLES.FORMS].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.FORMS] already exists
     %FORMSI-I-INSSMPSTART,   Beginning installation of Sample Application.
     %FORMSI-I-INSSMPEND,   Installation of Sample Application complete.

     %FORMSI-I-INSDEMSTART,   Beginning installation of Demonstration Package.
     %FORMSI-I-INSDEMEND,   Installation of Demonstration Package completed..

     %FORMSI-I-INSLSESTART,   Beginning installation of LSEDIT support.
     %TPU-S-SAVEENV, environment written to
     PULL06$DKA0:[SYS0.SYSUPD.FORMSI040]LSE$S1
     %FORMSI-I-INSLSEEND,   Installation of LSEDIT support completed.

                                             (continued on next page)

     B-4 I64 Systems Sample Installation

 






        Example B-1 (Cont.) I64 Sample Full Development Kit Installation

        %FORMSI-I-INSDEMSTART,  Beginning installation of message support.
        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
        VMI$ROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES].
        %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES] already exists
        %FORMSI-I-INSDEMEND,   Installation of message support completed.

            All files installed have names beginning with the product
            facility code (FORMS$).
            The following system areas are updated by this installation:

                [SYSEXE]                - added FORMS$*.EXE
                [SYSLIB]                - added FORMS$*.EXE files
                                        - added language definition files
                [SYSHLP]                - added Forms component help files
                [SYSMSG]                - added message files
                [SYS$STARTUP]           - added FORMS$STARTUP.COM
                [DECW$DEFAULTS]         - added Forms development environment
                                          initialization files
                [SYSTEST]               - added IVP procedures
                [SYSTEST.FORMS]         - added IVP files

                [SYSHLP.EXAMPLES.FORMS] - added sample application files
                [SYSHLP.EXAMPLES.FORMS] - added Demonstration Package
                [SYSHLP.EXAMPLES.FORMS.MESSAGES] - added modifiable message file
                                                   procedures

            These files are modified:

                [SYSLIB]STARLET.OLB      for FORMS$MGR_OBJECT_TABLES*.OBJ
                [SYSLIB]IMAGELIB.OLB     for FORMS$MANAGER.EXE
                [SYSLIB]DCLTABLES.EXE    for FORMS$DCL_COMMAND_TABLE.CLD
                [SYSHLP]HELPLIB.LIB      for Forms help
                [SYSLIB]LSE$SYSTEM_ENVIRONMENT.ENV for Forms IFDL environment
                [SYSLIB]EPC$FACILITY.TLB for Forms OracleTRACE facility definition.

             The final part of the installation process will now occur.
             Upon completion of this installation, please be sure to edit the
             system startup file in order to run FORMS$STARTUP.COM

             Please read the release notes before using DECforms. They contain
             important information for this release.

                                                (continued on next page)

                                     I64 Systems Sample Installation B-5

 






     Example B-1 (Cont.) I64 Sample Full Development Kit Installation

          They are located in SYS$HELP:FORMSI040.RELEASE_NOTES.

     %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Starting DECforms V4.0 Installation Verification Procedure.

        **************************************************************************
        ***                                                                    ***
        ***                             DECforms V4.0                          ***
        ***                                                                    ***
        ***                  Installation Verification Procedure               ***
        ***                                                                    ***
        ***                                                                    ***
        ***       Copyright 2005 Hewlett-Packard Development Company, L.P.     ***
        ***                                                                    ***
        ***                                                                    ***
        **************************************************************************

     DECforms V4.0 Installation Verification Procedure beginning.
     DECforms V4.0 Installation Verification Procedure completed successfully.

         The Installation Verification Procedure has completed successfully.
         Refer to the Installation Guide for further verification procedures

             Installation of FORMSI V4.0 completed at 13:07

         Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

         Creating installation data file: VMI$ROOT:[SYSUPD]FORMSI040.VMI_DATA

             VMSINSTAL procedure done at
     $











     B-6 I64 Systems Sample Installation

 






        B.2 Run-Time Kit for English Variant of DECforms

              Example B-2 contains a sample installation for the English
              variant of DECforms run-time kit.

        Example B-2 I64 Sample Run-Time Kit Installation

        $ @sys$update:vmsinstal FORMSRTI040

                OpenVMS  Software Product Installation Procedure V8.2-1

        It is 1-DEC-2005 at 14:22.

        Enter a question mark (?) at any time for help.

        %VMSINSTAL-W-ACTIVE, The following processes are still active:
               TCPIP$FTP_1
               BLD$UPDATECHK
        * Do you want to continue anyway [NO]? yes
        * Are you satisfied with the backup of your system disk [YES]?
        * Where will the distribution volumes be mounted: MYDISK:[MYDIRECTORY]
        * Enter installation options you wish to use (none):

        The following products will be processed:

          FORMSRTI V4.0

                Beginning installation of FORMSRTI V4.0 at 14:22

        %VMSINSTAL-I-RESTORE, Restoring product save set A ...
        %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

            **********************************************************************
            *                                                                    *
            *                 H P     D E C f o r m s    V 4 . 0                 *
            *             =========================================              *
            *                           Runtime Kit                              *
            *                                                                    *
            *       Copyright 2005 Hewlett-Packard Development Company, L.P      *
            *                                                                    *
            **********************************************************************

                                                (continued on next page)


                                     I64 Systems Sample Installation B-7

 






     Example B-2 (Cont.) I64 Sample Run-Time Kit Installation

             Product:      FORMS-RT
             Producer:     HP
             Version:      4.0
             Release Date: 11-JAN-2006

     * Does this product have an authorization key registered and loaded? yes

          This kit contains an Installation Verification Procedure (IVP)
          to  verify the correct installation of DECforms. Because the
          IVP requires interactive operator input, it must be run using a
          VT100, VT200, VT300, VT400, or VT500 compatible video terminal.
          If you are using one of these terminal types, you may run the
          procedure immediately after installation by answering "YES" to
          the IVP prompt. Or you may choose to invoke it later using
          the following:  @SYS$TEST:FORMS$RT_IVP.COM

     * Do you want to run the IVP after the installation [YES]?

     * Do you wish to register DECforms for Oracle TRACE support (50 blocks) [YES]?
         *************************************************************

         Oracle TRACE has not been installed. Now storing the FORMS
         facility definition into sys$share:epc$facility.tlb.
         After installing Oracle TRACE, the facility definition
         may be placed in the Oracle TRACE administration database
         Please refer to the Oracle TRACE User's guide for instructions
         on how to insert binary facility definitions into the
         Oracle TRACE administration database.

         *************************************************************
     %FORMSRTI-I-TRACEADDED, DECforms Oracle TRACE definition successfully added to.

     * Do you want to purge files replaced by this installation [YES]?

         No further questions will be asked during this installation.

     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSTEST.FORMS].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.FORMS] already exists

          The following files are added by this installation:

                                             (continued on next page)

     B-8 I64 Systems Sample Installation

 






        Example B-2 (Cont.) I64 Sample Run-Time Kit Installation

             SYS$LIBRARY:FORMS$MANAGER.EXE
             SYS$LIBRARY:FORMS$SDA.EXE
             SYS$LIBRARY:FORMS$MGRXMSHR.EXE
             SYS$LIBRARY:FORMS$MGRDDIFSHR.EXE
             SYS$LIBRARY:FORMS$CIOSHR.EXE
             SYS$LIBRARY:FORMS$PORTABLE_API.EXE
             SYS$MESSAGE:FORMS$MSGMGRSHR.EXE
             SYS$MESSAGE:FORMS$MSGMGRSHR_HEBREW.EXE
             SYS$STARTUP:FORMS$STARTUP.COM
             SYS$TEST:FORMS$RT_IVP.COM
             SYS$COMMON:[SYSTEST.FORMS]FORMS$RT_IVP.EXE

             The following files have been updated:

             SYS$LIBRARY:STARLET.OLB (inserted FORMS$MGR_OBJECT_TABLES*.OBJ)
             SYS$LIBRARY:IMAGELIB.OLB (inserted FORMS$MANAGER.EXE)
        %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

            Starting Installation Verification Procedure (IVP)

               for DECforms V4.0 Run-time Manager

        + DECforms Installation Verification Procedure                         +
        +----------------------------------------------------------------------+

            If you are reading this panel, it indicates that DECforms has

            successfully Enabled a form.

            Press Ctrl/Z or F10 to complete the Installation Verification

            Procedure.  If you do not receive any failure messages, the

            Procedure has successfully disabled this form.

        +------------------------------------------------------------------------------+
        No next item.

           The Installation Verification Procedure has  completed successfully.
           Refer to the Installation Guide for further verification procedures

                Installation of FORMSRTI V4.0 completed at 14:23

            Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

                                                (continued on next page)

                                     I64 Systems Sample Installation B-9

 






     Example B-2 (Cont.) I64 Sample Run-Time Kit Installation

         Creating installation data file: VMI$ROOT:[SYSUPD]FORMSRTI040.VMI_DATA

             VMSINSTAL procedure done at 14:23
     $


     B.3 Full Development Kit for Asian variant of DECforms

           Example B-3 contains a sample installation of the full
           development kit for Asian variant (HANZI) of DECforms.

     Example B-3 I64 Sample Full Development Kit Installation

     $ @sys$update:vmsinstal FORMSIAN040

             OpenVMS  Software Product Installation Procedure V8.2-1

     It is 1-DEC-2005 at 16:59.

     Enter a question mark (?) at any time for help.

     %VMSINSTAL-W-ACTIVE, The following processes are still active:
            TCPIP$FTP_1
            BLD$UPDATECHK
     * Do you want to continue anyway [NO]? yes
     * Are you satisfied with the backup of your system disk [YES]?
     * Where will the distribution volumes be mounted: MYDISK:[MYDIRECTORY]

     * Enter installation options you wish to use (none):

     The following products will be processed:

       FORMSIAN V4.0

             Beginning installation of FORMSIAN V4.0 at 16:59

     %VMSINSTAL-I-RESTORE, Restoring product save set A ...
     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

                                             (continued on next page)



     B-10 I64 Systems Sample Installation

 






        Example B-3 (Cont.) I64 Sample Full Development Kit Installation

            **********************************************************************
            *                                                                    *
            *                    D E C f o r m s    V 4 . 0                      *
            *                ====================================                *
            *                      Full Development Kit                          *
            *                                                                    *
            *       Copyright 2005 Hewlett-Packard Development Company, L.P.     *
            *                                                                    *
            *                                                                    *
            **********************************************************************

                   ******************************************************************

                   The installation of this kit will supersede any prior version of
                   DECforms that may be installed on this system.

                   ******************************************************************

        * Do you wish to install the main kit (16600 blocks) [YES]?

            DECforms supports following additional languages.

            HANZI, HANYU, HANGUL, KANJI

            You can install ONE of additional language support.
            However, to run DECforms with additional language support,
            make sure you have associate license,
            localized operating systems and terminals.

        * Do you wish to install additional language support (5000 blocks) [NO]? yes

            1. HANZI    Simplified Chinese support
            2. HANYU    Traditional Chinese support
            3. HANGUL   Korean support
            4. KANJI    Japanese support

            0. NONE     skip additional language support

        * Which language support do you wish to install ?  [0]: 1
        %FORMSIAN-I-SLCTLANG, Selected language is HANZI

                                                (continued on next page)

                                    I64 Systems Sample Installation B-11

 






     Example B-3 (Cont.) I64 Sample Full Development Kit Installation

             Product:      FORMS-UI-HANZI
             Producer:     HP
             Version:      V4.0
             Release Date: 11-JAN-2006

     * Does this product have an authorization key registered and loaded? yes

                This kit contains an Installation Verification Procedure (IVP)
                to  verify the correct installation of DECforms.
                It can be run prior to the conclusion of this
                procedure by answering "YES" to the IVP prompt or invoked
                after the installation as follows:

                @SYS$TEST:FORMS$IVP.COM

     * Do you want to run the IVP after the installation [YES]?

     * Do you wish to install Sample Application Programs (3000 blocks) [YES]?

     * Do you wish to install the demonstration package (12000 blocks) [YES]?

     * Do you wish to install LSEDIT support (250 blocks) [YES]?

     * Do you wish to install modifiable message file procedures (600 blocks) [YES]?

     * Do you wish to register DECforms for Oracle TRACE support (50 blocks) [YES]?

     * Do you want to purge files replaced by this installation [YES]?

       The remainder of the installation is expected to take between
       5 and 35 minutes.

       No further questions will be asked during this installation.

     %FORMSIAN-I-MAINKITBEGIN, restoring main kit.
     %VMSINSTAL-I-RESTORE, Restoring product save set B ...
     %FORMSIAN-I-MAINKITEND, main kit restored.

     %FORMSIAN-I-LANGKITBEGIN, restoring language kit.
     %VMSINSTAL-I-RESTORE, Restoring product save set C ...
     %FORMSIAN-I-LANGKITEND, language kit restored.

     %FORMSIAN-I-SMPKITSTART, restoring Sample Application package.
     %VMSINSTAL-I-RESTORE, Restoring product save set H ...
     %FORMSIAN-I-SMPKITEND, Sample Application package restored.

                                             (continued on next page)

     B-12 I64 Systems Sample Installation

 






        Example B-3 (Cont.) I64 Sample Full Development Kit Installation

        %FORMSIAN-I-DEMKITSTART, restoring Demonstration Package.
        %VMSINSTAL-I-RESTORE, Restoring product save set I ...
        %FORMSIAN-I-DEMKITEND, Demonstration Package restored.

            *************************************************************

            Oracle TRACE has not been installed. Now storing the FORMS
            facility definition into sys$share:epc$facility.tlb.
            After installing Oracle TRACE, the facility definition
            may be placed in the Oracle TRACE administration database
            Please refer to the Oracle TRACE User's guide for instructions
            on how to insert binary facility definitions into the
            Oracle TRACE administration database.

            *************************************************************
        %FORMSIAN-I-TRACEADDED, DECforms Oracle TRACE definition successfully added to.

        %FORMSIAN-I-INSMAINSTART, beginning installation of main kit.
        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
        VMI$ROOT:[SYSTEST.FORMS].
        %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.FORMS] already exists
        %FORMSIAN-I-INSMAINEND, installation of main kit complete.

        %FORMSIAN-I-INSLANGSTART, beginning installation of language kit.
        %FORMSIAN-I-HELP_DIR_MISSING, The directory for language specific HELP file is
        -FORMSIAN-I-HELP_DIR_MISSING, missing on your system.
        -FORMSIAN-I-HELP_DIR_MISSING, The help files will not be provided.
        %FORMSIAN-I-CONTINUE, The installation procedure is continuing...

          This installation defines your selected language as system wide.
          If you wish to change the language,
          please edit SYS$STARTUP:FORMS$STARTUP.COM,
          modify the following line to your language and execute the procedure.

            $ DEFINE/SYSTEM/EXEC/NOLOG FORMS$SYS_LANGUAGE "HANZI"

        %FORMSIAN-I-INSLANGEND, installation of language kit complete.

        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
        VMI$ROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES].
        %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.FORMS] already exists
        %FORMSIAN-I-INSSMPSTART, beginning installation of Sample Application.
        %FORMSIAN-I-INSSMPEND, installation of Sample Application complete.

                                                (continued on next page)

                                    I64 Systems Sample Installation B-13

 






     Example B-3 (Cont.) I64 Sample Full Development Kit Installation

     %FORMSIAN-I-INSDEMSTART, beginning installation of Demonstration Package.
     %FORMSIAN-I-INSDEMEND, installation of Demonstration Package completed..

     %FORMSIAN-I-INSLSESTART, beginning installation of LSEDIT support.
     %TPU-S-SAVEENV, environment written to
     PULL06$DKA0:[SYS0.SYSUPD.FORMSIAN040]LSE1
     %FORMSIAN-I-INSLSEEND, installation of LSEDIT support completed.

     %FORMSIAN-I-INSDEMSTART, beginning installation of message support.
     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES] already exists
     %FORMSIAN-I-INSDEMEND, installation of message support completed.

       All files installed have names beginning with the product
       facility code (FORMS$).
       The following system areas are updated by this installation:

             [SYSEXE]                - added FORMS$*.EXE
             [SYSLIB]                - added FORMS$*.EXE files
                                     - added language definition files
             [SYSHLP]                - added Forms component help files
             [SYSMSG]                - added message files
             [SYS$STARTUP]           - added FORMS$STARTUP.COM
             [DECW$DEFAULTS]         - added Forms development environment
                                       initialization files
             [SYSTEST]               - added IVP procedures
             [SYSTEST.FORMS]         - added IVP files

             [SYSHLP.EXAMPLES.FORMS] - added sample application files
             [SYSHLP.EXAMPLES.FORMS] - added Demonstration Package
             [SYSHLP.EXAMPLES.FORMS.MESSAGES] - added modifiable message file
                                                procedures

       These files are modified:

             [SYSLIB]STARLET.OLB      for FORMS$MGR_OBJECT_TABLES*.OBJ
             [SYSLIB]IMAGELIB.OLB     for FORMS$MANAGER.EXE
             [SYSLIB]DCLTABLES.EXE    for FORMS$DCL_COMMAND_TABLE.CLD
             [SYSHLP]HELPLIB.LIB      for Forms help
             [SYSLIB]LSE$SYSTEM_ENVIRONMENT.ENV for Forms IFDL environment
             [SYSLIB]EPC$FACILITY.TLB for Forms OracleTRACE facility definition.

                                             (continued on next page)

     B-14 I64 Systems Sample Installation

 






        Example B-3 (Cont.) I64 Sample Full Development Kit Installation

          The final part of the installation process will now occur.
          Upon completion of this installation, please be sure to edit the system
          startup file in order to run FORMS$STARTUP.COM

         Please read the release notes before using DECforms. These contain important
         information for this release.

          These are in SYS$HELP:FORMSIAN040.RELEASE_NOTES.

        %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Starting DECforms V4.0 Installation Verification Procedure.

           **************************************************************************
           ***                                                                    ***
           ***                             DECforms V4.0                          ***
           ***                                                                    ***
           ***                  Installation Verification Procedure               ***
           ***                                                                    ***
           ***                                                                    ***
           ***       Copyright 2005 Hewlett-Packard Development Company, L.P.     ***
           ***                                                                    ***
           ***                                                                    ***
           **************************************************************************

        DECforms V4.0 Installation Verification Procedure beginning.
        DECforms V4.0 Installation Verification Procedure completed successfully.

          The Installation Verification Procedure has completed successfully.
          Refer to the Installation Guide for further verification procedures

                Installation of FORMSIAN V4.0 completed at 17:01

            Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

            Creating installation data file: VMI$ROOT:[SYSUPD]FORMSIAN040.VMI_DATA

                VMSINSTAL procedure done at 17:01

        $



                                    I64 Systems Sample Installation B-15

 






     B.4 Run-Time Kit for Asian Variant of DECforms

           Example B-4 contains a sample installation of the run-time
           kit for the Asian variant (HANZI) of DECforms.

     Example B-4 I64 Sample Run-Time Kit Installation

     $ @sys$update:vmsinstal FORMSRTIAN040

             OpenVMS  Software Product Installation Procedure V8.2-1

     It is 6-DEC-2005 at 00:01.

     Enter a question mark (?) at any time for help.

     %VMSINSTAL-W-ACTIVE, The following processes are still active:
            TCPIP$FTP_1
            BLD$UPDATECHK
            BATCH_12
     * Do you want to continue anyway [NO]? yes
     * Are you satisfied with the backup of your system disk [YES]?
     * Where will the distribution volumes be mounted: MYDISK:[MYDIRECTORY]
     * Enter installation options you wish to use (none):

     The following products will be processed:

       FORMSRTIAN V4.0

             Beginning installation of FORMSRTIAN V4.0 at 00:01

     %VMSINSTAL-I-RESTORE, Restoring product save set A ...
     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

         **********************************************************************
         *                                                                    *
         *                 H P   D E C f o r m s    V 4 . 0                   *
         *             =========================================              *
         *                           Runtime Kit                              *
         *                                                                    *
         *        Copyright 2005 Hewlett-Packard Development Company, L.P.   *
         *                                                                    *
         *                                                                    *
         **********************************************************************

                                             (continued on next page)

     B-16 I64 Systems Sample Installation

 






        Example B-4 (Cont.) I64 Sample Run-Time Kit Installation

            DECforms supports following additional languages.

            HANZI, HANYU, HANGUL, KANJI

            You can install ONE of additional language support.
            However, to run DECforms with additional language support,
            make sure you have associate license,
            localized operating systems and terminals.

        * Do you wish to install additional language support (200 blocks) [YES]?

            1. HANZI    Simplified Chinese support
            2. HANYU    Traditional Chinese support
            3. HANGUL   Korean support
            4. KANJI    Japanese support

            0. NONE     skip additional language support

        * Which language support do you wish to install ?  [4]: 1
        %FORMSRTIAN-I-SLCTLANG, Selected language is HANZI

                Product:      FORMS-RT-UI-HANZI
                Producer:     HP
                Version:      V4.0
                Release Date: 11-JAN-2006

        * Does this product have an authorization key registered and loaded? yes

                   This kit contains an Installation Verification Procedure (IVP)
                   to  verify the correct installation of DECforms.
                   Because the IVP requires interactive operator input, it
                   must be run using a VT100, VT200, VT300, VT400, or VT500
                   compatible video terminal. If you are using one of these
                   terminal types, you may run the procedure immediately after
                   installation by answering "YES" to the IVP prompt. Or
                   you may choose to invoke it later using the following:

                           @SYS$TEST:FORMS$RT_IVP.COM

        * Do you want to run the IVP after the installation [YES]?

        * Do you wish to register DECforms for Oracle TRACE support ( blocks) [YES]?
            *************************************************************

                                                (continued on next page)

                                    I64 Systems Sample Installation B-17

 






     Example B-4 (Cont.) I64 Sample Run-Time Kit Installation

         Oracle TRACE has not been installed. Now storing the FORMS
         facility definition into sys$share:epc$facility.tlb.
         After installing Oracle TRACE, the facility definition
         may be placed in the Oracle TRACE administration database
         Please refer to the Oracle TRACE User's guide for instructions
         on how to insert binary facility definitions into the
         Oracle TRACE administration database.

         *************************************************************
     %FORMSRTIAN-I-TRACEADDED, DECforms Oracle TRACE definition successfully added
     to
      the Oracle TRACE registrar.

     * Do you want to purge files replaced by this installation [YES]?

       No further questions will be asked during this installation.

       This installation defines your selected language as system wide.
       If you wish to change the language,
       please edit SYS$STARTUP:FORMS$STARTUP.COM,
       modify the following line to your language and execute the procedure.

         $ DEFINE/SYSTEM/EXEC/NOLOG FORMS$SYS_LANGUAGE "HANZI"

     %VMSINSTAL-I-SYSDIR, This product creates system disk directory
     VMI$ROOT:[SYSTE
     ST.FORMS].
     %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.FORMS] already exists

                The following files are added by this installation:

                SYS$LIBRARY:FORMS$MANAGER.EXE
     + DECforms Installation Verification Procedure
     +--------------------------------------------------------------------+

         If you are reading this panel, it indicates that DECforms has

         successfully Enabled a form.

        Press Ctrl/Z or F10 to complete the Installation Verification

         Procedure.  If you do not receive any failure messages, the

                                             (continued on next page)

     B-18 I64 Systems Sample Installation

 






        Example B-4 (Cont.) I64 Sample Run-Time Kit Installation

            Procedure has successfully disabled this form.

        +---------------------------------------------------------------------+

          The Installation Verification Procedure has completed successfully.
          Refer to the Installation Guide for further verification procedures

                Installation of FORMSRTIAN V4.0 completed at 00:02

            Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

            Creating installation data file: VMI$ROOT:[SYSUPD]FORMSRTIAN040.VMI_DATA

                VMSINSTAL procedure done at 00:03
        $




























                                    I64 Systems Sample Installation B-19

 









                                                                       C
        ________________________________________________________________

                        Files and Logical Names Installed on Your System



              The DECforms installation procedure installs a number
              of files on your system and defines some logical names.
              Section C.1 lists the files installed or modified by
              the DECforms full development kit. Section C.2 lists the
              files installed or modified by the DECforms run-time kit.
              Section C.3 describes the logical names the installation
              procedure defines.

        C.1 Files Added and Modified by the Full Development Kit

              The following list contains the names of all files
              installed on your system when you install the DECforms
              full development kit:

              o  Directory SYS$COMMON:[SYSTEST]

                    FORMS$IVP.COM
                    FORMS$RT_IVP.COM

              o  Directory SYS$COMMON:[SYSTEST.FORMS]

                    FORMS$RT_IVP.EXE

              o  Directory SYS$SYSROOT:[SYSEXE]

                    FORMS$DISPATCH.EXE
                    FORMS$TEXTEDIT.EXE

              o  Directory SYS$SYSROOT:[SYSHLP]

                    FORMS$FDE_HELP.HLB
                    FORMS$HELPLIB.HLB
                    FORMS$PEDVTHELP.HLB
                    FORMSAnnn.RELEASE_NOTES (for Alpha kit)
                    FORMSInnn.RELEASE_NOTES (for I64 kit)

              o  Directory SYS$SYSROOT:[SYSHLP.EXAMPLES.FORMS]

                    FORMS$CHECKING.EXE

                    Files and Logical Names Installed on Your System C-1

 






                 FORMS$CHECKING_ADA.ADA
                 FORMS$CHECKING_BASIC.BAS
                 FORMS$CHECKING_BASIC_COMMON.BAS
                 FORMS$CHECKING_C.C
                 FORMS$CHECKING_COBOL.COB
                 FORMS$CHECKING_DATA.DAT
                 FORMS$CHECKING_FORM.FORM
                 FORMS$CHECKING_FORM.IFDL
                 FORMS$CHECKING_FORTRAN.FOR
                 FORMS$CHECKING_PASCAL.PAS
                 FORMS$CHECKING_PLI.PLI
                 FORMS$DEMO.COM
                 FORMS$DEMO_CALCULATOR_FORM.EXE
                 FORMS$DEMO_CALCULATOR_FORM.IFDL
                 FORMS$DEMO_CALLS.COB
                 FORMS$DEMO_CALLS.EXE
                 FORMS$DEMO_CALLS.FORM
                 FORMS$DEMO_CALLS.IFDL
                 FORMS$DEMO_COMMAND_RECALL_FORM.EXE
                 FORMS$DEMO_COMMAND_RECALL_FORM.IFDL
                 FORMS$DEMO_COPYCAT_FORM.EXE
                 FORMS$DEMO_COPYCAT_FORM.IFDL
                 FORMS$DEMO_ENABLE.BAS
                 FORMS$DEMO_ENABLE.EXE
                 FORMS$DEMO_GLOBE_FORM.EXE
                 FORMS$DEMO_GLOBE_FORM.IFDL
                 FORMS$DEMO_GUIDE.PS
                 FORMS$DEMO_GUIDE.TXT
                 FORMS$DEMO_MRF_C.C
                 FORMS$DEMO_MRF.EXE
                 FORMS$DEMO_MRF_FOR.FOR
                 FORMS$DEMO_MRF_FORM.IFDL
                 FORMS$DEMO_ORDER_ENTRY_FORM.EXE
                 FORMS$DEMO_ORDER_ENTRY_FORM.IFDL
                 FORMS$DEMO_PHONE.EXE
                 FORMS$DEMO_PHONE.IFDL
                 FORMS$DEMO_PHONE.PAS
                 FORMS$DEMO_PHONE_FILE.DAT
                 FORMS$DEMO_RULE_FORM.EXE
                 FORMS$DEMO_RULE_FORM.IFDL
                 FORMS$DEMO_SHOW_TEXTLIB.COB
                 FORMS$DEMO_SHOW_TEXTLIB.EXE
                 FORMS$DEMO_SHOW_TEXTLIB.FORM


     C-2 Files and Logical Names Installed on Your System

 






                    FORMS$DEMO_SHOW_TEXTLIB.IFDL
                    FORMS$DEMO_TEXTLIB.COB
                    FORMS$DEMO_TIMER.EXE
                    FORMS$DEMO_TIMER_AST.COB
                    FORMS$DEMO_TIMER_AST_ROUTINE.COB
                    FORMS$DEMO_TIMER_CHECK_STATUS.COB
                    FORMS$DEMO_TIMER_COMP_ROUTINE.COB
                    FORMS$DEMO_TIMER_FORM.IFDL
                    FORMS$DEMO_TIMER_SET_TIMER.COB
                    FORMS$DEMO_TM.C
                    FORMS$DEMO_TM.EXE
                    FORMS$DEMO_TM_FORM.IFDL
                    FORMS$DEMO_TRACK_AND_FIELD.C
                    FORMS$DEMO_TRACK_AND_FIELD.EXE
                    FORMS$DEMO_TRACK_AND_FIELD.IFDL
                    FORMS$SAMPLE_FORM.FORM
                    FORMS$SAMPLE_FORM.IFDL
                    FORMS$SAMPLE_PROGRAM.EXE
                    FORMS$SAMPLE_PROGRAM_API.EXE
                    FORMS$SAMPLE_PROGRAM_API.FOR
                    FORMS$SAMPLE_PROGRAM_C.EXE
                    FORMS$SAMPLE_PROGRAM_C.C
                    FORMS$SAMPLE_PROGRAM_FORTRAN.EXE
                    FORMS$SAMPLE_PROGRAM_FORTRAN.FOR
                    FORMS_CHECKING_COMMON.F
                    FORMS_CHECKING_GETSYSINFO.F

              o  Directory SYS$SYSROOT:[SYSHLP.EXAMPLES.FORMS.MESSAGES]

                    DECFORMS_MESSAGES.TXT
                    FORMS$MSG_BUILD.COM
                    FORMS$MSG_RUN_TIME.MSG

              o  Directory SYS$SYSROOT:[SYSLIB]

                    FORMSDEF.H
                    FORMS$ADA_DEFINITIONS.ADA
                    FORMS$BAS_DEFINITIONS.BAS
                    FORMS$BLISS_DEFINITIONS.R32
                    FORMS$CIOSHR.EXE
                    FORMS$CNVSHR.EXE
                    FORMS$COB_DEFINITIONS.LIB
                    FORMS$C_DEFINITIONS.H
                    FORMS$FDESHR.EXE
                    FORMS$FDE_EDIT.TPU

                    Files and Logical Names Installed on Your System C-3

 






                 FORMS$FDE_SUBPROC.COM
                 FORMS$FOR_DEFINITIONS.FOR
                 FORMS$FSESHR.EXE
                 FORMS$FSTSHR.EXE
                 FORMS$MANAGER.EXE
                 FORMS$MGRDDIFSHR.EXE
                 FORMS$MGRWEBSHR.EXE
                 FORMS$MGRXMSHR.EXE
                 FORMS$PAS_DEFINITIONS.PAS
                 FORMS$PEDSHR.EXE
                 FORMS$PEDVTEXEC.EXE
                 FORMS$PLI_DEFINTIONS.PLI
                 FORMS$PORTABLE_API.EXE
                 FORMS$TRNSHR.EXE
                 FORMS$UTLBCKSHR.EXE
                 FORMS$UTLEXOSHR.EXE
                 FORMS$UTLEXTSHR.EXE
                 FORMS$UTLTSTSHR.EXE
                 FORMS_DEF.F
                 FORMS_DEF.H
                 FORMSDEF.F
                 FORMSDEF.H

           o  Directory SYS$SYSROOT:[SYSMSG]

                 FORMS$MSGMGRSHR.EXE
                 FORMS$MSGMGRSHR_HEBREW.EXE
                 FORMS$MSGPRDSHR.EXE

           o  Directory SYS$SYSROOT:[SYS$STARTUP]

                 FORMS$STARTUP.COM

           The following list contains the names of and changes to
           all files modified by the DECforms installation procedure
           when you install the full development kit:

           o  SYS$LIBRARY:DCLTABLES.EXE-FORMS DCL command is added.

           o  SYS$LIBRARY:STARLET.OLB-DECforms object tables are
              added.

           o  SYS$LIBRARY:IMAGELIB.OLB-FORMS$MANAGER.EXE is added.

           o  SYS$LIBRARY:LSE$SYSTEM_ENVIRONMENT.ENV-DECforms LSE
              support (optional) is added.

           o  SYS$HELP:HELPLIB.HLB-DECforms Help is added.

     C-4 Files and Logical Names Installed on Your System

 






              o  EPC$DATABASE.DIR:EPC$ADMIN_DB.RDB-DECforms is
                 registered in the Oracle TRACE database.


        C.2 Files Added and Modified by the Run-Time Kit

              The following list contains the names of all files
              installed on your system when you install the DECforms
              run-time kit:

              o  Directory SYS$COMMON:[SYSTEST]

                    FORMS$RT_IVP.COM

              o  Directory SYS$COMMON:[SYSTEST.FORMS]

                    FORMS$RT_IVP.EXE

              o  Directory SYS$SYSROOT:[SYSLIB]

                    FORMS$CIOSHR.EXE
                    FORMS$MANAGER.EXE
                    FORMS$MGRXMSHR.EXE
                    FORMS$MGRDDIFSHR.EXE
                    FORMS$MGRWEBSHR.EXE
                    FORMS$PORTABLE_API.EXE

              o  Directory SYS$SYSROOT:[SYSMSG]

                    FORMS$MSGMGRSHR.EXE
                    FORMS$MSGMGRSHR_HEBREW.EXE

              o  Directory SYS$SYSROOT:[SYS$STARTUP]

                    FORMS$STARTUP.COM

              o  Directory SYS$SYSROOT:[SYSHLP]

                    FORMSAnnn.RELEASE_NOTES -for Alpha kit
                    FORMSInnn.RELEASE_NOTES -for I64 kit

              The following list contains the names of and changes to
              all files modified by the DECforms installation procedure
              when you install the run-time kit:

              o  SYS$LIBRARY:STARLET.OLB-DECforms object tables are
                 added.

              o  SYS$LIBRARY:IMAGELIB.OLB-FORMS$MANAGER.EXE is added.

                    Files and Logical Names Installed on Your System C-5

 






     C.3 Logical Names Added

           When you install DECforms, one logical name is entered
           into the system logical name table. This name is stored
           in the DECforms startup file and is entered automatically
           into the system logical name table whenever the system
           reboots or whenever you run the software.

           The logical name is FORMS$EXAMPLES and is defined as
           SYS$SYSROOT:[SYSHELP.EXAMPLES.FORMS]



































     C-6 Files and Logical Names Installed on Your System
