       /                      Compaq Multimedia Services C                      for_OpenVMS_Alpha_____________________________ '                      Installation Guide   .                      Order Number: AA-QN8KC-TE                        April 2000     C                      This guide describes how to install the Compaq C                      Multimedia Services for OpenVMS Alpha run-time H                      environment and the developer's kit on AlphaStationE                      workstations running the OpenVMS Alpha operating                       system.            ?                      Revision/Update Information: This document @                                                   supercedes theE                                                   Multimedia Services ?                                                   OpenVMS Alpha E                                                   Installation Guide, =                                                   Version 2.0   G                      Operating System:            OpenVMS Alpha Version D                                                   7.1-2 or 7.2-1 and8                                                   higher  E                      Software Version:            MMS Version 2.2 for ?                                                   OpenVMS Alpha                       0                      Compaq Computer Corporation#                      Houston, Texas                  E            __________________________________________________________   -             2000 Compaq Computer Corporation   ?            COMPAQ, AlphaStation, VAX, VMS, the Compaq logo, and C            the DIGITAL logo Registered in U.S. Patent and Trademark             Office.  D            OpenVMS is a trademark of Compaq Information Technologies            Group, L.P.  <            Microsoft and Windows are trademarks of Microsoft            Corporation. 2            Motif is a trademark of the Open Group.  >            All other product names mentioned herein may be theB            trademarks or registered trademarks of their respective            companies.   D            Confidential computer software. Valid license from CompaqE            or authorized sublicensor required for possession, use, or E            copying. Consistent with FAR 12.211 and 12.212, Commercial B            Computer Software, Computer Software Documentation, and>            Technical Data for Commercial Items are licensed toA            the U.S. Government under vendor's standard commercial             license.   @            Compaq shall not be liable for technical or editorial0            errors or omissions contained herein.  C            The information in this publication is subject to change B            without notice and is provided "AS IS" WITHOUT WARRANTYA            OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE USE OF ?            THIS INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT @            SHALL COMPAQ BE LIABLE FOR ANY DIRECT, CONSEQUENTIAL,E            INCIDENTAL, SPECIAL, PUNITIVE, OR OTHER DAMAGES WHATSOEVER =            (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF >            BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OFD            BUSINESS INFORMATION), EVEN IF COMPAQ HAS BEEN ADVISED OFE            THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING SHALL APPLY @            REGARDLESS OF THE NEGLIGENCE OR OTHER FAULT OF EITHERC            PARTY AND REGARDLESS OF WHETHER SUCH LIABILITY SOUNDS IN C            CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER THEORY OF LEGAL B            LIABILITY, AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL)            PURPOSE OF ANY LIMITED REMEDY.   E            The limited warranties for Compaq products are exclusively E            set forth in the documentation accompanying such products. ?            Nothing herein should be construed as constituting a *            further or additional warranty.  E                                                                  6625                                C    ________________________________________________________________   C                                                            Contents     C    Preface..................................................      v     3    1  Preparing for Multimedia Services for OpenVMS        Installation  C          1.1   Registering Your Software License ...........    1-1 7          1.2   Required Operating System Components and C                Software.....................................    1-2 2          1.3   Special Checks and Requirements for9                Installing Multimedia Services Version 2.2 C                for OpenVMS Alpha............................    1-3 C          1.4   Installation Requirements....................    1-3 C          1.4.1     Privileges...............................    1-3 C          1.4.2     Process Account Quotas...................    1-3 C          1.4.3     System Parameters........................    1-4 C          1.4.4     Disk Space...............................    1-5 C          1.4.5     Backing Up Your System Disk..............    1-6 C          1.5   Standard System Maintenance Procedures.......    1-6 7          1.5.1     Checking and Setting Process Account C                    Quotas...................................    1-6 C          1.5.2     Checking System Parameter Values.........    1-7 4          1.5.3     Calculating the Values for GlobalC                    Pagelets and Global Sections.............    1-7 8          1.5.4     Changing System Parameter Values withC                    AUTOGEN..................................    1-8 C          1.5.5     Setting Dynamic Parameter Values.........    1-9               C                                                                 iii                  9      2  Installing Compaq Multimedia Services for OpenVMS 
         Alpha   >            2.1   Preparing to Install Multimedia Services V2.2E                  for OpenVMS Alpha............................    2-1 8            2.1.1     Extracting and Printing the ProductE                      Release Notes............................    2-1 E            2.2   Software Installation Overview...............    2-2 E            2.2.1     Software Kit Names.......................    2-2 E            2.2.2     Starting the Installation................    2-3 E            2.2.2.1     Displaying the Copyright Message.......    2-4 E            2.2.2.2     Determining System Information.........    2-4 >            2.2.2.3     Verifying Sufficient Allocation for theE                        GBLPAGES Value.........................    2-4 E            2.2.2.4     Rebooting the System...................    2-4 E            2.2.2.5     Installing the Product.................    2-5 E            2.2.2.6     Continuing the Installation............    2-5 E            2.2.2.7     Executing the Installation Procedure...    2-6         3  After Installation  0            3.1   Running the IVP Separately fromE                  Installation.................................    3-1 E            3.2   Editing the System Files.....................    3-2 E            3.3   Modifying System Parameters..................    3-3 :            3.4   Making the Product Usable on a VMSclusterE                  System.......................................    3-3 E            3.5   Setting User Account Requirements............    3-4 E            3.5.1     Privileges...............................    3-4 E            3.5.2     User Account Quotas......................    3-4         A  Sample Script   E            A.1   Sample Installation Dialog ..................    A-1 E            A.2   Sample Installation Verification Procedure...    A-2                           iv                  )         B  Files Installed on Your System   H               B.1   Installed Files..............................    B-1H               B.2   Logical Names................................    B-6             Tables  A               1-1       Process Account Quotas for the Installing H                         Account..................................    1-4  9               1-2       Minimum Required System Parameter H                         Values...................................    1-5  H               1-3       Disk Space Requirements..................    1-5                                                            H                                                                        v                           H         ________________________________________________________________  H                                                                  Preface      A               This guide contains instructions for installing the C               Compaq Multimedia Services for OpenVMS Alpha run-time D               environment and Compaq Multimedia Services for OpenVMSH               Alpha development kit on AlphaStations running the OpenVMS               operating system.   >               The installation procedure installs all files in=               subdirectories under the following directories:   "               SYS$COMMON:[SYS$LDR]!               SYS$COMMON:[SYSEXE] !               SYS$COMMON:[SYSLIB] /               SYS$COMMON:[SYSHLP.EXAMPLES.MMOV] (               SYS$COMMON:[MMOV_INCLUDES]  G               Keep this guide with your distribution kit. You will need F               it to install maintenance updates or to reinstall CompaqB               Multimedia Services for OpenVMS Alpha, if necessary.           Intended Audience   F               This guide is for OpenVMS system managers and others whoG               install layered products on OpenVMS systems. In addition, E               system managers must have experience with the following                 OpenVMS utilities:  3               o  System Generation utility (SYSGEN)   .               o  Authorize utility (AUTHORIZE)  D               The release notes are intended for all users of CompaqF               Multimedia Services for OpenVMS Alpha. The release notes               are located in:   .               SYS$HELP:MMOV-V2_2.RELEASE_NOTES  H                                                                        v                       Document Structure   0            This document contains the following:  E            Chapter 1 describes the hardware and software requirements ;            for Compaq Multimedia Services for OpenVMS Alpha E            installation and related procedures that you must complete C            before installing Compaq Multimedia Services for OpenVMS             Alpha.   ?            Chapter 2 describes how to install Compaq Multimedia &            Services for OpenVMS Alpha.  <            Chapter 3 describes the Installation VerificationD            Procedure (IVP), how to remove Compaq Multimedia ServicesE            for OpenVMS Alpha from your system, and the files that you C            need to run Compaq Multimedia Services for OpenVMS Alpha             applications.  D            Appendix A contains sample scripts for interactive CompaqA            Multimedia Services for OpenVMS Alpha installation and /            Installation Verification Procedure.   E            Appendix B lists the files installed for Compaq Multimedia 5            Services for OpenVMS Alpha on your system.         Related Documents  #            For more information on:   B            o  Installing OpenVMS layered products, see the OpenVMS3               installation guide for your processor   ?            o  OpenVMS system management, see the OpenVMS System                Manager's Manual  @            o  OpenVMS system disk backup, see the OpenVMS System3               Management Utilities Reference Manual   D            o  Using the License Management Facility, see the OpenVMS/               License Management Utility Manual   B            o  Motif, see the OpenVMS DECwindows Motif Installation               Guide         vi                  C               For additional information about OpenVMS products and C               services, access the following OpenVMS World Wide Web                address:  #               http://www.compaq.com            Support   E               If errors occur during product installation, the system B               displays failure messages. For descriptions of errorE               messages, see the OpenVMS Alpha documentation on system G               messages, recovery procedures, and software installation.   E               If an error occurs while Compaq Multimedia Services for B               OpenVMS Alpha is in use and you believe the error isG               caused by a problem with the product, contact your Compaq %               support representative.            Reader's Comments   G               Compaq welcomes your comments on this manual. Please send <               comments to either of the following addresses:  /               Internet    openvmsdoc@compaq.com   5               Mail        Compaq Computer Corporation >                           OSSG Documentation Group, ZKO3-4/U08,                           110 Spit Brook Rd./                           Nashua, NH 03062-2698   -         How To Order Additional Documentation   ?               Use the following World Wide Web address to order '               additional documentation:   #               http://www.compaq.com   F               If you need help deciding which documentation best meets,               your needs, call 800.282.6672.            H                                                                      vii                       Conventions  8            This document uses the following conventions:  E            __________________________________________________________ E            Convention____Description_________________________________   A            boldface      Boldface text indicates data structures, D            text          data types, and field names, and user input@                          in interactive examples. New terms alsoD                          appear in boldface text the first time they(                          are introduced.  E            italic text   Italic text indicates function arguments and :                          emphasizes important information.  @            monospace     Monospace type is used in code segmentsB            type          and programming examples, and to indicate8                          function names and chunk names.  =            literalString Literal strings that appear in text, B                          examples, and syntax descriptions must beE            ______________entered_exactly_as_shown.___________________   8      Multimedia Services for OpenVMS Alpha Documentation  ;            In addition to this guide, the Compaq Multimedia @            Services for OpenVMS Alpha documentation set includes            the following:   >            o  The Compaq Multimedia Services for OpenVMS AlphaB               Programmer's Guide, which contains information aboutD               using the Compaq Multimedia Services for OpenVMS Alpha@               application programming interface (API) to develop8               applications that use multimedia features.  C            o  The Compaq Multimedia Services for OpenVMS Alpha Run- E               Time Environment Guide, which contains instructions for C               using the utilities included in the Compaq Multimedia C               Services for OpenVMS Alpha run-time-only environment. D               The run-time-only environment is bundled free with allD               Alpha workstations running the OpenVMS Alpha operating               system.     	      viii                  A               o  The Compaq Multimedia Services for OpenVMS Alpha G                  Release Notes, which are installed during the software D                  installation. The release notes contain informationG                  that you may need before developing programs using the B                  Compaq Multimedia Services for OpenVMS Alpha API.  2                  The release notes are located in:  1                  SYS$HELP:MMOV-V2_2.RELEASE_NOTES                                                                         H                                                                       ix d  S                  H                                                                        1H         ________________________________________________________________  H               Preparing for Multimedia Services for OpenVMS Installation      -         1.1 Registering Your Software License   G               If you are installing Multimedia Services Version 2.2 for D               OpenVMS Alpha on a newly licensed node or cluster, youE               must first register a License Product Authorization Key H               (License PAK) using the License Management Facility (LMF).F               The License PAK may be shipped along with the kit if youF               ordered the license and media together; otherwise, it isE               shipped separately to a location on your license order.l  G               If you are installing Multimedia Services Version 2.2 for E               OpenVMS Alpha as an update on a node or cluster already G               licensed for this software, you must register the Service F               Update PAK (SUP) that is included in your Service UpdateG               Kit. If you already registered a License PAK or a SUP for F               this product on this node or cluster, you do not need to               register the SUP.n  D               If you are installing an update of Multimedia ServicesH               Version 2.2 for OpenVMS Alpha but lack a service contract,H               call your Compaq representative for instructions on how to                get a License PAK.  E               If you are installing prerequisite or optional softwarenD               along with Multimedia Services Version 2.2 for OpenVMSC               Alpha, review the PAK status and install the PAKs for F               any prerequisite or optional software before you install@               Multimedia Services Version 2.2 for OpenVMS Alpha.  D               You must register and load your license for Multimedia?               Services Version 2.2 for OpenVMS Alpha before youaE               start the installation in order to run the Installation @               Verification Procedure (IVP) and use the software.    H           Preparing for Multimedia Services for OpenVMS Installation 1-1           ?      Preparing for Multimedia Services for OpenVMS Installation *      1.1 Registering Your Software License  D            To register a license under the OpenVMS operating system,@            first log in to the system manager's account, SYSTEM.=            You then can choose one of two ways to perform the             registration:  B            o  Invoke the SYS$UPDATE:VMSLICENSE.COM procedure. WhenD               it prompts you for information, respond with data from               your License PAK.e  C            o  At the DCL prompt, enter the LICENSE REGISTER commandS@               with the appropriate qualifiers that correspond to&               License PAK information.  A            If you plan to use Multimedia Services Version 2.2 forA>            OpenVMS Alpha on more than one node in a VMSclusterB            system, you need to perform a license load on the other6            nodes after you complete this installation.  E            For complete information on using the LMF, see the OpenVMST-            License Management Utility Manual.H  :      1.2 Required Operating System Components and Software  ?            The OpenVMS operating system comes with a variety ofBE            support options, or classes. Classes include such featuresH@            as networking and RMS journaling. Multimedia Services?            Version 2.2 for OpenVMS Alpha requires OpenVMS Alpha -            Version 7.1-2 or 7.2-1 and higher.u  E            If you are installing any device options or the multimediaiC            development kit, you need both the OpenVMS required savec4            set and the programming support save set.  ?            For a complete list of the required classes, see the A            Software Product Description (SPD). The SPD contains a_B            complete list of prerequisite and optional software and*            their required version numbers.                C      1-2 Preparing for Multimedia Services for OpenVMS Installation  1  r      H               Preparing for Multimedia Services for OpenVMS InstallationH  for        Installing Multimedia Services Version 2.2 for OpenVMS Alpha  E         1.3 Special Checks and Requirements for Installing Multimedia.2             Services Version 2.2 for OpenVMS Alpha  H               The product "DEC AXPVMS VMS Vxx" must be registered in theE               POLYCENTER software installation database. To determine.G               if the product is registered, enter the following command.               line:   #               $product show product.  A               If the product is not registered, use the following.               command:  F               $product register product VMS/source=SYS$COMMON:[000000]  %         1.4 Installation Requirements.  D               This section describes the requirements for installingH               Multimedia Services Version 2.2 for OpenVMS Alpha (processH               account quotas, system parameters, disk space, and so on).  B               Standard procedures for checking and setting various6               parameters are described in Section 1.5.           1.4.1 Privileges  D               To install Multimedia Services Version 2.2 for OpenVMSH               Alpha, you must be logged in to an account that has SETPRV3               or at least the following privileges:.                 o  CMKRNL.                 o  WORLD                 o  SYSPRVt  $         1.4.2 Process Account Quotas  @               The account you use to install Multimedia ServicesG               Version 2.2 for OpenVMS Alpha must have sufficient quotas B               to enable you to perform the installation. Table 1-1*               summarizes the requirements.      H           Preparing for Multimedia Services for OpenVMS Installation 1-3           ?      Preparing for Multimedia Services for OpenVMS Installation."      1.4 Installation Requirements  >            Table 1-1 Process Account Quotas for the InstallingE            __________Account_________________________________________   E            Account_Quota____Value____________________________________               ASTLM            250h              BIOLM            150   "            BYTLM            64,000              DIOLM            1502               ENQLM            2000              FILLM            100   "            PGFLQUO          50,000              PRCLM            10               JTTQUOTA         4096  "            WSEXTENT         16,400  #            WSDEF            2000[1].               WSQUO            4000E            [1]The_values_for_WSEXTENT_and_WSQUO_must_be_equal_to_or__e  (            greater than the WSDEF value.E            __________________________________________________________r        1.4.3 System Parameters  @            Table 1-2 lists the minimum required system parameterA            values for the installation. Depending on the kinds of3D            programs and applications running at your site, you might0            need higher values for some settings.            C      1-4 Preparing for Multimedia Services for OpenVMS Installation  5  S      H               Preparing for Multimedia Services for OpenVMS InstallationH                                            1.4 Installation Requirements  H               Table_1-2_Minimum_Required_System_Parameter_Values________  H               System_Parameter_________Minimum_Value____________________  -               GBLPAGES[1]              20,000r  +               GBLPAGFIL                4096   *               GBL sections[1]          600  +               MAXBUF[2]                8200i  )               PQL_DASTLM[2]            24   )               PQL_DBIOLM[2]            32.  )               PQL_DDIOLM[2]            32   .               VIRTUALPAGECNT           500,000  -               WSMAX                    65,600.H               [1]These_values_represent_the_number_of_free_global_______  ;               pagelets and global sections required for the.E               installation, not the total number you need to run yourS(               system and other software.H               [2]These dynamic system parameters must be set permanentlyF               to values equal to or greater than the values listed. Do<               not lower these values after the installation.H               __________________________________________________________           1.4.4 Disk Space  C               Table 1-3 summarizes the storage requirements for allnE               options for Multimedia Services Version 2.2 for OpenVMSt               Alpha.  H               Table_1-3_Disk_Space_Requirements_________________________  H                                                                   BlocksJ               Options_____________________________________________Required  H               Multimedia Services Version 2.2 for OpenVMS Alpha   18,038               Run-Time  G               Multimedia Services Version 2.2 for OpenVMS Alpha   5,611                Development KitE  H               Multimedia Services Version 2.2 for OpenVMS Alpha   28,777H               Sample_Clips______________________________________________  H           Preparing for Multimedia Services for OpenVMS Installation 1-5 a  r      ?      Preparing for Multimedia Services for OpenVMS Installation "      1.4 Installation Requirements  E            To determine the number of free disk blocks on the currents>            system disk, enter the following command at the DCL            prompt:  &            $ SHOW DEVICE SYS$SYSDEVICE  &      1.4.5 Backing Up Your System Disk  D            Compaq recommends that you do a system disk backup before#            installing any software.o  A            Use the backup procedures that are established at yourrD            site. For details on performing a system disk backup, seeB            the section on the Backup Utility in the OpenVMS System            Management Subkit.   /      1.5 Standard System Maintenance Procedures   ;            This section explains how to do various standardh            procedures:  2            o  Check and set process account quotas  +            o  Check system parameter valuesi  =            o  Calculate values for global pagelets and globald               sections  >            o  Change parameter values with the OpenVMS AUTOGEN               command procedure   B            o  Set dynamic parameter values with the OpenVMS System)               Generation utility (SYSGEN)   6      1.5.1 Checking and Setting Process Account Quotas  E            User account quotas are stored in the file SYSUAF.DAT. Use B            the OpenVMS Authorize Utility (AUTHORIZE) to verify andB            change user account quotas. First set your directory to-            SYS$SYSTEM and then run AUTHORIZE:   #            $ SET DEFAULT SYS$SYSTEM             $ RUN AUTHORIZE            UAF>e  E            At the UAF> prompt, enter the SHOW command with an accountu;            name to check a particular account. For example:o              UAF> SHOW SMITH  C      1-6 Preparing for Multimedia Services for OpenVMS Installation            H               Preparing for Multimedia Services for OpenVMS InstallationH                               1.5 Standard System Maintenance Procedures  H               To change a quota, enter the MODIFY command. The followingG               example changes the FILLM quota for the SMITH account andh*               then exits from the utility:  )               UAF> MODIFY SMITH /FILLM=50s               UAF> EXITt  B               After you exit from the utility, the system displaysC               messages indicating whether or not changes were made.lG               Once the changes have been made, you must log out and log 9               in again for the new quotas to take effect.   G               For more information on modifying account quotas, see the H               description of the Authorize utility in the OpenVMS System                Management Subkit.  .         1.5.2 Checking System Parameter Values  F               To check the values of your system parameters, enter theF               following command at the DCL prompt to invoke the System*               Generation utility (SYSGEN):  %               $ RUN SYS$SYSTEM:SYSGENo               SYSGEN>u  F               At the SYSGEN> prompt, enter the SHOW command to displayD               the value of a system parameter. The following example@               displays the value for the WSMAX system parameter:                  SYSGEN> SHOW WSMAX  H               After checking the parameters with the SHOW command, enterE               the EXIT command at the SYSGEN> prompt to return to DCLe               level.  C         1.5.3 Calculating the Values for Global Pagelets and Global                Sections  D               To install and run Multimedia Services Version 2.2 forA               OpenVMS Alpha, you must have sufficient free global C               pagelets and global sections. You must first find outlD               how many free global pagelets and sections you have onH               your system. Then, use AUTOGEN if you need to increase theD               global pagelets and global sections system parameters.  H           Preparing for Multimedia Services for OpenVMS Installation 1-7           ?      Preparing for Multimedia Services for OpenVMS Installation /      1.5 Standard System Maintenance Proceduresi  B            You can use the WRITE command with the F$GETSYI lexicalB            function to find the number of free global pagelets and>            global sections. The following example shows how toA            get this information at your terminal (the default forn            SYS$OUTPUT):               $ WRITE SYS$OUTPUTv&            F$GETSYI("CONTIG_GBLPAGES")            15848            $ WRITE SYS$OUTPUTm$            F$GETSYI("FREE_GBLSECTS")
            24   A            If the values displayed by the system are greater than C            the values in Table 1-2, you do not need to increase the D            values for these parameters. If the values of free globalB            pagelets or global sections are less than the values inE            Table 1-2, you must increase the system parameter setting.g  @            Section 1.5.4 describes the procedures for increasing&            these values using AUTOGEN.  8      1.5.4 Changing System Parameter Values with AUTOGEN  =            Use the AUTOGEN command procedure to change systema?            parameters. AUTOGEN automatically adjusts values foriC            parameters that are associated with the values you reset C            manually. To change system parameters with AUTOGEN, editv-            the SYS$SYSTEM:MODPARAMS.DAT file.r  M            To change a parameter value listed in the SYS$SYSTEM:MODPARAMS.DATe>            file, delete the current value associated with that-            parameter and enter the new value.   A            To add a new parameter to the SYS$SYSTEM:MODPARAMS.DATq>            file, add a line that includes both the name of the0            parameter and its value. For example:              WSMAX = 8096   ?            To modify incremental parameters such as free globals@            pagelets and global sections, use ADD_. The following=            example increases the global page setting by 2000:               ADD_GBLPAGES = 2000  C      1-8 Preparing for Multimedia Services for OpenVMS Installation            H               Preparing for Multimedia Services for OpenVMS InstallationH                               1.5 Standard System Maintenance Procedures  G               When you set the page file quota, do not use a value that D               exceeds the amount of page file space available on the               system.a  G               After you make all your changes, exit from the editor andlF               execute the AUTOGEN procedure to recalculate your systemH               parameters. The following command recalculates your system0               parameters and reboots the system:  2               $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT  D               When you specify REBOOT, AUTOGEN performs an automaticD               system shutdown and then reboots the system. Any usersB               logged in to the system are immediately disconnectedD               during the shutdown. The automatic reboot puts the new+               parameter values into effect.e  C               The AUTOGEN utility automatically adjusts some of the E               SYSGEN parameters based on the consumption of resourcesr?               since the last reboot. If you do not want to takeeA               advantage of this automatic adjustment, include thea?               NOFEEDBACK qualifier on the AUTOGEN command line.e  G               For more information about using AUTOGEN, see the OpenVMSi'               System Management Subkit.   .         1.5.5 Setting Dynamic Parameter Values  G               Use the System Generation utility (SYSGEN) to set dynamiclC               parameter values. Dynamic parameters changed with thehC               SYSGEN WRITE ACTIVE command become active immediatelyeG               without any need to reboot your system. Rebooting returnsoF               the dynamic parameter values to their previous settings.  E               After you change the dynamic parameter values, completeeE               the installation before rebooting the system. After you E               finish with the installation, you can reset the dynamic F               parameters to their previous values or let them be reset=               automatically when you next reboot your system.o  F               The dynamic parameter values for Multimedia Services for4               OpenVMS Alpha are listed in Table 1-2.  E               If the dynamic parameter values on your system are lessnG               than the values in Table 1-2, use the following series of E               commands to change the values. This example changes the #               MAXBUF value to 8192.   H           Preparing for Multimedia Services for OpenVMS Installation 1-9 t  a      ?      Preparing for Multimedia Services for OpenVMS Installatione/      1.5 Standard System Maintenance Proceduresr  "            $ RUN SYS$SYSTEM:SYSGEN            SYSGEN> USE ACTIVE "            SYSGEN> SET MAXBUF 8192            SYSGEN> WRITE ACTIVE             SYSGEN> EXITu                                                                                D      1-10 Preparing for Multimedia Services for OpenVMS Installation E                     H                                                                        2H         ________________________________________________________________  H                  Installing Compaq Multimedia Services for OpenVMS Alpha      E               This chapter describes how to install Compaq MultimediaGF               Services for OpenVMS Alpha using the POLYCENTER SoftwareG               Installation utility. Multimedia Services Version 2.2 fornF               OpenVMS Alpha supports POLYCENTER software installationsA               using the DIGITAL Command Language (DCL) interface.o  G               Refer to the OpenVMS System Manager's Manual for completehH               details about installing and managing software products on               your system.  E         2.1 Preparing to Install Multimedia Services V2.2 for OpenVMSm             Alphat  E               Before you initiate the installation procedure, perform "               the following tasks:  G               o  Extract the Compaq Multimedia Services Version 2.2 forl-                  OpenVMS Alpha Release Notes.2  F               o  Notify system users that you are about to install the                  product.   ?         2.1.1 Extracting and Printing the Product Release Notes   A               To extract a copy of the Compaq Multimedia Services F               Version 2.2 for OpenVMS Release Notes, enter the PRODUCTH               EXTRACT RELEASE_NOTES command followed by the product name&               MMOV, at the DCL prompt:  S               $PRODUCT EXTRACT RELEASE_NOTES MMOV/source=kit location/file=filenameq  H               Once you extract the release notes to a file, then you canF               print the file. Note that you do not need to install the;               product before you extract the release notes.   H              Installing Compaq Multimedia Services for OpenVMS Alpha 2-1 c         <      Installing Compaq Multimedia Services for OpenVMS Alpha'      2.2 Software Installation Overview   '      2.2 Software Installation Overviewm  E            The sections that follow describe the stages of installingdB            Multimedia Services Version 2.2 for OpenVMS Alpha usingD            the POLYCENTER Software Installation utility. See ChapterB            1 for information about account quotas, disk space, and            system parameters.   D            Refer to the OpenVMS System Manager's Manual for complete=            information about responding to questions that the ?            POLYCENTER Software Installation utility asks duringgA            product installation. For example, when you respond top/            questions, you can do the following:m  >            o  Enter a value and press the Return key to select               options.  <            o  Press the Return key to accept default values.  %            o  Confirm your responses.   A               After you respond to questions by selecting options C               or accepting default values, the installation utility 1               displays a summary of your answers.   B               Then a question is displayed, asking whether you areA               satisfied with your answers and whether you want tohE               continue with the installation. If you decide to change C               your responses, type No and press the Return key. YoueC               can then reenter your responses or answer No and exitr,               from the installation utility.  7            o  Stop the installation by pressing Ctrl/Y.   -               This option is not recommended.s        2.2.1 Software Kit Names1  A            The name of the Multimedia Services for OpenVMS kit isQ*            DEC-AXPVMS-MMOV-V0202--.1.PCSI.  @            When you install Multimedia Services for OpenVMS, theC            installation procedure looks for the product kits in the B            PCI$SOURCE directory. If PCI$SOURCE is not defined, the%            current directory is used.   @      2-2 Installing Compaq Multimedia Services for OpenVMS Alpha           H                  Installing Compaq Multimedia Services for OpenVMS AlphaH                                       2.2 Software Installation Overview  F                 ________________________Note  ________________________  ;                 The PCSI_INSTALLATION.COM command procedureUB                 determines the system and version on which you are@                 installing the Multimedia Services software. See@                 Section 2.2.2 for information about this command                 procedure.  E                 _____________________________________________________n  '         2.2.2 Starting the Installations  D               Run the PCSI_INSTALLATION.COM procedure, which is partF               of the POLYCENTER software installation save set, at theF               DCL level to start the installation. Enter the following(               command at the DCL prompt:  7               $PRODUCT INSTALL MMOV /SOURCE=kitlocationu  E               This command procedure includes the following phases ofu               the installation:m  3               o  Running preinstallation procedures   )               o  Installing the save setsr  4               o  Running postinstallation procedures  G               The sections that follow discuss the steps and activities D               that take place once you execute the PCSI_INSTALLATION                command procedure.  F               As the installation progresses, the installation utilityB               displays a percentage that indicates how much of the5               installation is completed. For example:o  3               Portion Done: 0%...10%...20%...30%...a  A               When the installation is successfully completed, anaD               informational message is displayed by the installationE               procedure. The following information is displayed aftereH               Multimedia Services for OpenVMS is successfully installed:  I               Portion Done: 0%..10%..20%..30%...50%...70%..80%..90%..100% 7               The following product has been installed:_"               DEC AXPVMS MMOV V2.2  H              Installing Compaq Multimedia Services for OpenVMS Alpha 2-3    p      <      Installing Compaq Multimedia Services for OpenVMS Alpha'      2.2 Software Installation OverviewS  -      2.2.2.1 Displaying the Copyright Message   D            The installation utility displays the following copyright            message:_  Z            *** DEC AXPVMS MMOV V2.2: Multimedia Services Version 2.2 for OpenVMS Alpha ***  7            Copyright  1996 Compaq Computer Corporation   +      2.2.2.2 Determining System Informationo  A            The installation utility checks and stores information E            about the supported versions of your OpenVMS Alpha system.   <            Refer to Section 1.2 for information about system            prerequisites.   ?            The information that is displayed if your version of B            the OpenVMS operating system does not meet the criteria)            depends on the OpenVMS system.T  =            On OpenVMS Alpha systems, the following warning is             displayed:   K            WARNING: This kit may be installed only on OpenVMS Alpha VersionE.            7.1--2 and 7.2--1 or higher systems  C      2.2.2.3 Verifying Sufficient Allocation for the GBLPAGES Valueu  B            The installation utility informs you if adequate valuesA            are allocated for the GBLPAGES system parameter. CheckrA            Table 1-2 for a list of adequate values for Multimediac2            Services Version 2.2 for OpenVMS Alpha.  !      2.2.2.4 Rebooting the System1  E            In this step of the installation, the installation utilityl@            tells you if it is necessary to reboot the system. IfC            you are reinstalling the Multimedia Services for OpenVMSyD            kit, you also need to reinstall the driver and reboot the            system.  >            If a system has a Compaq Ensoniq AudioPCI card or a?            Microsoft Sound Board or compatible card, the system A            needs to be rebooted to load either the MMOV$ENSDRIVER B            or MMOV$MSBDRIVER driver. Also, if the product has beenD            reinstalled, a reboot is required to reload the sound andD            video drivers. If system parameters need to be changed, aD            reboot is required for the new parameters to take effect.  @      2-4 Installing Compaq Multimedia Services for OpenVMS Alpha E         H                  Installing Compaq Multimedia Services for OpenVMS AlphaH                                       2.2 Software Installation Overview  &         2.2.2.5 Installing the Product  H               The POLYCENTER Software Installation utility then installsG               the Multimedia Services for OpenVMS software. The utility ?               displays messages and asks a series of questions.   @               On OpenVMS Alpha systems, the following message isE               displayed if the installation utility cannot locate thefH               Multimedia Services software in the PSCI$SOURCE directory:  _               %PCSI-E-OPENIN, error opening PCSI$SOURCE:[SYSMGR]*-*-*-%%%%%-*-*.PCSI*; as input O               -RMS-F-DEV, error in device name or inappropriate device type fors               operation 0               %PCSI-E-S_OPFAIL, operation failedM               %PCSIUI-E-ABORT, fatal error encountered - operation terminated   E               When you enter the correct directory specification, the D               installation utility locates the software and proceeds$               with the installation.  B               If you press Ctrl/C, the following message displays:  E               Terminating installation of MMOV V2.2 for OpenVMS Alphav  +         2.2.2.6 Continuing the Installation   @               Once the installation utility locates the kit, theB               procedure asks whether you want to continue with the               installation.   ,               Do you want to continue? [Yes]  >               If you enter Yes (default) and press Return, theH               installation procedure displays the following information,H               which includes previously displayed copyright information.H               Note that this example shows the message that is displayed'               on OpenVMS Alpha systems.N  Y               *** DEC AXPVMS MMOV V2.2: Multimedia Services Version 2.2 for OpenVMS AlphaG  :               Copyright  1996 Compaq Computer Corporation  )               Compaq Computer CorporationV  0               This product uses the PAK: MMOV-RT  H               Do you want all the default values for this product? [YES]  >               Multimedia Services run-time support files [YES]  2               Do you want to view the values? [NO]  H              Installing Compaq Multimedia Services for OpenVMS Alpha 2-5           <      Installing Compaq Multimedia Services for OpenVMS Alpha'      2.2 Software Installation Overview7  <            If you answer Yes to view the default values, theE            following information is displayed, followed by a question E            asking whether you are satisfied with these default values             (default is Yes):  V            *** DEC AXPVMS MMOV V2.2: Multimedia Services Version 2.2 for OpenVMS Alpha  .            Sample Audio and Video Clips: [Yes]  N            Kit to develop multimedia applications (MMOV-DV PAK Required): [No]  3            Are you satisfied with the values? [Yes]8  ?            If you are not satisfied with the values, type No inC?            response to the question: Are you satisfied with the =            values? Then press Return; you can now change youro(            responses to these questions.  1      2.2.2.7 Executing the Installation Procedurel  ?            Once you select the programming and translated-imagee?            support options, the installation utility begins therC            software installation. A message is displayed that showsnB            you when the product installation begins and when it is2            completed, as in the following example:  #            Execution phase starting 3            The following product will be installed:t            DEC AXPVMS MMOV V2.2 D            %PCSIUI-I-VOLINFO, estimated space information for volume            DISK$AXPVMS071sG            -PCSI-I-VOLSPC, 39771 required; 585648 available; 545877 netA  E            Portion Done: 0%..10%..20%..30%..50%...70%..80%..90%..100%E4            The following product has been installed:            DEC AXPVMS MMOV V2.2                   @      2-6 Installing Compaq Multimedia Services for OpenVMS Alpha S  S                  H                                                                        3H         ________________________________________________________________  H                                                       After Installation      A               This chapter explains what you need to do after theiA               installation to make Compaq Multimedia Services forE*               OpenVMS Alpha ready for use.  >               You can perform the following tasks after CompaqA               Multimedia Services for OpenVMS Alpha is installed:   B               o  Run the Installation Verification Procedure (IVP)                  separatelyp  ;               o  Edit the system startup and shutdown files   1               o  Modify system parameter settings   ?               o  Make the product usable on a VMScluster systeme  (               o  Set user account quotas  8         3.1 Running the IVP Separately from Installation  E               You usually run the Installation Verification Procedure H               (IVP) during installation. If you have system problems andG               want to run the IVP separately to ensure the integrity ofp9               installed files, use the following command:n  "               $ @sys$test:mmov$ivp  D               The Multimedia Services for OpenVMS Alpha InstallationI               Verification Procedure is located at SYS$TEST:MMOV$IVP.COM.aF               The installation procedure checks for an installed audioA               device and plays audio clips included with the kit.   E               To hear the audio test, turn on your speakers or put on                headphones.   H                                                   After Installation 3-1    E            After Installation 5      3.1 Running the IVP Separately from Installationo  @            When the audio testing is completed, the IVP runs theB            video test. The test plays the AVI clips that come withB            the kit. Your workstation must be running DECwindows soA            that a window session can be opened to play the clips.hC            The first clip has an audio track. If you have installede@            an audio device, turn on your speakers or put on your            headphones.  A            If the server cannot be started, the IVP will not run. C            This occurs if you are reinstalling the kit and you need ?            to reboot your system. Once your system is rebooted, ,            execute the IVP to run the tests.  E            Refer to Section A.2 for a sample script of the Multimedia ?            Services for OpenVMS Alpha Installation Verificatione            Procedure.   !      3.2 Editing the System Filesu  A            You must edit the system startup and shutdown files tod?            provide for automatic startup and shutdown of CompaqnA            Multimedia Services for OpenVMS Alpha when your system             is rebooted.o  =            Add the command line that starts Compaq MultimedianA            Services for OpenVMS Alpha to the system startup file,n)            SYS$MANAGER:SYSTARTUP_VMS.COM.l  A            You must position this new command line after the lineOB            that invokes the network startup command procedure. TheC            following example shows the network startup command lineVA            followed by the Compaq Multimedia Services for OpenVMST&            Alpha startup command line:  &            $ @SYS$MANAGER:STARTNET.COM                 .                  .                  .m*            $ @SYS$STARTUP:MMOV$STARTUP.COM  @            Add the following command line to the system shutdown            file,%            SYS$MANAGER:SYSHUTDWN.COM:_  +            $ @SYS$STARTUP:MMOV$SHUTDOWN.COM         3-2 After Installationq l  e      H                                                       After InstallationH                                          3.3 Modifying System Parameters  '         3.3 Modifying System Parametersn  A               The installation for Compaq Multimedia Services for A               OpenVMS Alpha requires that you raise the values of B               the GBLPAGES system parameter. Once the installation?               is complete, lower this value to ensure efficienthF               system performance. Table 1-2 contains the value for the0               parameter under normal operations.  <         3.4 Making the Product Usable on a VMScluster System  G               If you want to run Compaq Multimedia Services for OpenVMS C               Alpha on multiple nodes of a VMScluster system, firstaA               check to see that you have the appropriate software D               license (see Section 1.1). Then, perform the followingD               steps after you install Compaq Multimedia Services for               OpenVMS Alpha:  G               1. Enter the LICENSE LOAD command to activate the licensem?                  on each node in the VMScluster system on whicheC                  Compaq Multimedia Services for OpenVMS Alpha is too                  be executed.a  H               2. The startup files on each node in the cluster should be5                  edited, as described in Section 3.2.   C               3. Use the OpenVMS SYSMAN utility to execute a set ofcH                  commands on all cluster nodes, whether or not the nodesC                  are licensed to use Compaq Multimedia Services for E                  OpenVMS Alpha; failure to do so may cause unexpectedc"                  errors for users.  F                 ________________________Note  ________________________  C                 If you are using a dual-architecture (VAX and Alphai@                 systems) heterogeneous cluster, before executingA                 these commands, make sure the appropriate logicale>                 names have been set to define the scope of theA                 SYSMAN DO commands. For more information, see the 8                 OpenVMS system management documentation.  E                 _____________________________________________________d      H                                                   After Installation 3-3 s  r            After Installationl9      3.4 Making the Product Usable on a VMScluster Systemo  @               While logged in as SYSTEM, or as another user nameD               that has the SETPRV privilege or the CMKRNL and SYSPRV>               privileges, use the SYSMAN utility to update the-               cluster environment as follows:   %               $ RUN SYS$SYSTEM:SYSMANi-               SYSMAN> SET ENVIRONMENT/CLUSTER,9               %SYSMAN-I-ENV, current command environment:y2                       Clusterwide on local clusterJ                       Username SYSTEM       will be used on nonlocal nodes6               SYSMAN> DO @SYS$STARTUP:MMOV$STARTUP.COM?               %SYSMAN-I-OUTPUT, command execution on node NODE1r?               %SYSMAN-I-OUTPUT, command execution on node NODE2a  A               The SYSMAN utility will cause each DO command to ber9               executed on all nodes of the local cluster.a  *      3.5 Setting User Account Requirements  E            To work with Compaq Multimedia Services for OpenVMS Alpha, D            user accounts on your system must have certain privileges            and quotas.        3.5.1 Privileges   ?            To use Compaq Multimedia Services for OpenVMS Alpha,i@            each account must have at least the TMPMBX and NETMBXE            privileges. Use the OpenVMS Authorize utility to determinec:            whether users have the privileges they require.        3.5.2 User Account Quotas  @            You must make sure that the appropriate user accountsE            have sufficient quotas to be able to use Compaq MultimediaeE            Services for OpenVMS Alpha. See Table 1-1 for the required             user account quotas.   C            Section 1.5.1 describes how to verify and change account             quotas.                  3-4 After Installation     n                  H                                                                        AH         ________________________________________________________________  H                                                            Sample Script      H               This appendix provides a sample script for an installationC               of Compaq Multimedia Services Version 2.2 for OpenVMSs               Alpha.  &         A.1 Sample Installation Dialog  D               The following example shows the script for the instal-C               lation of Multimedia Services Version 2.2 for OpenVMSs               Alpha:  <               $ product install mmov /source=dka300:[000000]  6               The following product has been selected:"               DEC AXPVMS MMOV V2.2  ,               Do you want to continue? [YES]  Y               *** DEC AXPVMS MMOV V2.2: Multimedia Services Version 2.2 for OpenVMS ALPHA   N               Copyright 1996 Compaq Computer Corporation. All rights reserved.  )               Compaq Computer Corporationi  0               This product uses the PAK: MMOV-RT  C               If installing the Development Kit, the PAK is MMOV-DV   <               Do you want the defaults for all options [YES]  7               Do you want to review the options? [NO] yh  U               DEC AXPVMS MMOV V2.2: Multimedia Services Version 2.2 for OpenVMS Alphas7                   DEC AXPVMS VMS V7.1-2     [Installed]T4                   Sample Audio and Video clips : YESS                   Kit to develop multimedia applications (MMOV-DV PAK Required): NOt  8                   Are you satisfied with the values? YES  H                                                        Sample Script A-1 S  O            Sample Script#      A.1 Sample Installation Dialogr  #            Execution phase startingIB            The following product will be installed to destination:;            DEC AXPVMS MMOV V2.2 DISK$ALPHA0712:[VMSCOMMON.]oL            Portion Done: 0%...10%...20%...30%...50%...70%...80%...90%...100%4            The following product has been installed:;            DEC AXPVMS MMOV V2.2             Layered ProductS  V            *** DEC AXPVMS MMOV V2.2: Multimedia Services Version 2.2 for OpenVMS Alpha  K                Insert the following lines in SYS$MANAGER:SYSTARTUP_VMS.COM:s0                    @SYS$STARTUP:MMOV$STARTUP.COMG                Insert the following lines in SYS$MANAGER:SYSHUTDWN.COM:.1                    @SYS$STARTUP:MMOV$SHUTDOWN.COMs  E                This product requires the following SYSGEN parameters: )                    GBLPAGFIL minimum 4096o  N                Release notes are available at SYS$HELP:MMOV-V2_2.RELEASE_NOTES  F                Please be sure your system parameters are properly set.  U                It is necessary to reboot your system for the software to take effect.   K                The Server and IVP can not run until you reboot your system.l            $  3      A.2 Sample Installation Verification Proceduret  D            The following example shows the Installation VerificationB            Procedure (IVP) script for Multimedia Services V2.2 for            OpenVMS Alpha::              $@sys$test:mmov$ivp  J            Multimedia Services Version 2.2 for OpenVMS Alpha IVP starting.  )                    Starting audio test...t  L             You have an AUDIO device installed on your system.  This commandO             procedure will wait thirty seconds while you turn on your speakers,oA             and/or put your headphones on to listen to the clips.e  M             During the test the volume will be set at various levels for bothMM             the right channel and left channel this is normal, and is part ofb             the test.e  >                    Setting volume to 70% on your audio device.  G                    Playing audio clip MMOV$EXAMPLES:[SAMPLE]PROPS1.WAV.t        A-2 Sample Script o  i      H                                                            Sample ScriptH                           A.2 Sample Installation Verification Procedure  K                       Setting volume to 70% right channel 60% left channel.p  J                       Playing audio clip MMOV$EXAMPLES:[SAMPLE]PROPS2.WAV.  K                       Setting volume to 60% right channel 50% left channel.   J                       Playing audio clip MMOV$EXAMPLES:[SAMPLE]PROPS3.WAV.  =                       Setting volume to 65% on both channels.l  K                       Playing audio clip MMOV$EXAMPLES:[SAMPLE]TROPIC1.WAV.   =                       Setting volume to 70% on both channels.   J                       Playing audio clip MMOV$EXAMPLES:[SAMPLE]WORLD2.WAV.  ,                       Starting video test...  Y                This command procedure will play the two AVI clips that come with the kit.-  Y                The first clip has an audio track and if you have a sound card you will bepV                able to hear the sound track. If you do not have a sound card installedQ                then you need to dismiss the window's error box stating this fact.   S                       Playing video clip MMOV$EXAMPLES:[SAMPLE]COUNTDOWN-JPEG2.AVI.a  Q                       Playing video clip MMOV$EXAMPLES:[SAMPLE]AMERICA3-JPEG.AVI.   O                 Multimedia Services Version 2.2 for OpenVMS Alpha IVP complete.                $t                              H                                                        Sample Script A-3 n  t                  H                                                                        BH         ________________________________________________________________  H                                           Files Installed on Your System      C               The Multimedia Services Version 2.2 for OpenVMS Alpha G               installation procedure installs a number of files on your 4               system and defines some logical names.           B.1 Installed Filesd  >               The following list contains the names of all theA               directories and files installed on your system whenh/               Multimedia Services is installed:t                 [MMOV_INCLUDES]o&               [MMOV_INCLUDES]AVIEASY.H%               [MMOV_INCLUDES]AVIFMT.H "               [MMOV_INCLUDES]CMM.H+               [MMOV_INCLUDES]CMMFUNCPROTO.H '               [MMOV_INCLUDES]CMMFUNCS.Hp$               [MMOV_INCLUDES]CMMMD.H$               [MMOV_INCLUDES]CMMOS.H(               [MMOV_INCLUDES]CMMOSDEFS.H'               [MMOV_INCLUDES]CMMPROTO.H &               [MMOV_INCLUDES]CMM_API.H&               [MMOV_INCLUDES]CMM_LIB.H*               [MMOV_INCLUDES]COLOR_UTILS.H%               [MMOV_INCLUDES]COMMON.H,&               [MMOV_INCLUDES]COMPDDK.H&               [MMOV_INCLUDES]COMPMAN.H(               [MMOV_INCLUDES]COPYRIGHT.H)               [MMOV_INCLUDES]CURSORFONT.Ha$               [MMOV_INCLUDES]DEVIO.H'               [MMOV_INCLUDES]DIGITALV.Hn$               [MMOV_INCLUDES]DLFCN.H&               [MMOV_INCLUDES]DRAWDIB.H%               [MMOV_INCLUDES]ENDIAN.Hi    H                                       Files Installed on Your System B-1 u         #      Files Installed on Your Systeme      B.1 Installed Files  !            [MMOV_INCLUDES]ERRNO.Ht#            [MMOV_INCLUDES]EXTUTIL.H             [MMOV_INCLUDES]IF.H!            [MMOV_INCLUDES]IOCTL.H (            [MMOV_INCLUDES]IOCTL_COMPAT.H            [MMOV_INCLUDES]IP.H            [MMOV_INCLUDES]IPC.Ho            [MMOV_INCLUDES]LMF.Hs&            [MMOV_INCLUDES]MACHLIMITS.H%            [MMOV_INCLUDES]MACHPARAM.H "            [MMOV_INCLUDES]MALLOC.H"            [MMOV_INCLUDES]MCIAVI.H"            [MMOV_INCLUDES]MCIWND.H             [MMOV_INCLUDES]MMAN.H"            [MMOV_INCLUDES]MMAUTH.H#            [MMOV_INCLUDES]MMBASIC.Ha!            [MMOV_INCLUDES]MMDDK.Hi#            [MMOV_INCLUDES]MME_API.H &            [MMOV_INCLUDES]MME_PUBLIC.H!            [MMOV_INCLUDES]MMREG.Hn$            [MMOV_INCLUDES]MMSYSTEM.H!            [MMOV_INCLUDES]MSACM.HP$            [MMOV_INCLUDES]MSVIDDRV.H#            [MMOV_INCLUDES]MSVIDEO.H:!            [MMOV_INCLUDES]OSDEP.H.!            [MMOV_INCLUDES]PARAM.Hg$            [MMOV_INCLUDES]PLATFORM.H#            [MMOV_INCLUDES]READAVI.H &            [MMOV_INCLUDES]SECDEFINES.H            [MMOV_INCLUDES]SHM.HS            [MMOV_INCLUDES]SMT.H "            [MMOV_INCLUDES]SMTINT.H"            [MMOV_INCLUDES]SMTSTR.H%            [MMOV_INCLUDES]STANDARDS.H_!            [MMOV_INCLUDES]STATS.H #            [MMOV_INCLUDES]STRINGS.H              [MMOV_INCLUDES]TIME.H"            [MMOV_INCLUDES]TIMERS.H$            [MMOV_INCLUDES]TTYCHARS.H'            [MMOV_INCLUDES]TTYDEFAULTS.Hm"            [MMOV_INCLUDES]TTYDEV.H            [MMOV_INCLUDES]UIO.H #            [MMOV_INCLUDES]UTSNAME.Hn    '      B-2 Files Installed on Your Systema r  e      H                                           Files Installed on Your SystemH                                                      B.1 Installed Files  '               [MMOV_INCLUDES]VM_TYPES.H                 [MMOV_INCLUDES]X.H$               [MMOV_INCLUDES]XATOM.H$               [MMOV_INCLUDES]XAUTH.H#               [MMOV_INCLUDES]XEXT.Hu)               [MMOV_INCLUDES]XFUNCPROTO.Hh#               [MMOV_INCLUDES]XLIB.H &               [MMOV_INCLUDES]XLIBINT.H"               [MMOV_INCLUDES]XMM.H"               [MMOV_INCLUDES]XOS.H&               [MMOV_INCLUDES]XOSDEFS.H%               [MMOV_INCLUDES]XPROTO.Ht(               [MMOV_INCLUDES]XRESOURCE.H#               [MMOV_INCLUDES]XSHM.Hm$               [MMOV_INCLUDES]XUTIL.H               [SYS$LDR]h)               [SYS$LDR]MMOV$ENSDRIVER.EXEt)               [SYS$LDR]MMOV$ESSDRIVER.EXEu)               [SYS$LDR]MMOV$MSBDRIVER.EXE (               [SYS$LDR]MMOV$VIDRIVER.EXE               [SYS$STARTUP] ,               [SYS$STARTUP]MMOV$SHUTDOWN.COM+               [SYS$STARTUP]MMOV$STARTUP.COMh               [SYSEXE]'               [SYSEXE]MMOV$ALPHAVCR.EXEd+               [SYSEXE]MMOV$AUDIOCONTROL.EXE +               [SYSEXE]MMOV$AUDIODEVICES.EXEE(               [SYSEXE]MMOV$AUDIOPLAY.EXE*               [SYSEXE]MMOV$AUDIORECORD.EXE/               [SYSEXE]MMOV$AUDIOSELECTPORTS.EXEt-               [SYSEXE]MMOV$AUDIOSETVOLUME.EXEe(               [SYSEXE]MMOV$AVIRECORD.EXE'               [SYSEXE]MMOV$DECSOUND.EXE *               [SYSEXE]MMOV$JPEGCONVERT.EXE%               [SYSEXE]MMOV$SERVER.EXEe,               [SYSEXE]MMOV$VIDDUALRECORD.EXE+               [SYSEXE]MMOV$VIDEOODYSSEY.EXEa&               [SYSEXE]MMOV$VIDPLAY.EXE(               [SYSEXE]MMOV$VIDRECORD.EXE*               [SYSEXE]MMOV$VIDSTREAMIN.EXE                [SYSEXE]SYSTEM.INI               [SYSHLP]&               [SYSHLP]AUDIOCONTROL.HLP    H                                       Files Installed on Your System B-3 e  P      #      Files Installed on Your Systeme      B.1 Installed Files              [SYSHLP.EXAMPLES]!            [SYSHLP.EXAMPLES.MMOV]l'            [SYSHLP.EXAMPLES.MMOV.AUDIO]e5            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIODEVICES.CY=            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIODEVICES_VERSION.H 2            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIOPLAY.C:            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIOPLAY_VERSION.H4            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIORECORD.C<            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIORECORD_VERSION.H9            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIOSELECTPORTS.C A            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIOSELECTPORTS_VERSION.Hi7            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIOSETVOLUME.Ca7            [SYSHLP.EXAMPLES.MMOV.AUDIO]AUDIO_README.TXT 6            [SYSHLP.EXAMPLES.MMOV.AUDIO]BUILD_AUDIO.COM3            [SYSHLP.EXAMPLES.MMOV.AUDIO]MMC_CMDLIN.Ha(            [SYSHLP.EXAMPLES.MMOV.COMMON]8            [SYSHLP.EXAMPLES.MMOV.COMMON]BUILD_COMMON.COM9            [SYSHLP.EXAMPLES.MMOV.COMMON]COMMON_README.TXT 5            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_BUFFERS.C 5            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_BUFFERS.Ht4            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_CMDLIN.C4            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_CMDLIN.H3            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_COLOR.C 3            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_COLOR.He4            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_MEMORY.C4            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_MEMORY.H6            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_MESSAGES.C6            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_MESSAGES.H3            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_UTILS.C 3            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_UTILS.Hn2            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_WAVE.C2            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_WAVE.H4            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_WAVE_ .H9            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_WAVE_FORMAT.Ci9            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_WAVE_FORMAT.H 7            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_WAVE_IN_ .CM8            [SYSHLP.EXAMPLES.MMOV.COMMON]MMC_WAVE_OUT_ .C/            [SYSHLP.EXAMPLES.MMOV.COMMON]STUBS.Co(            [SYSHLP.EXAMPLES.MMOV.SAMPLE]9            [SYSHLP.EXAMPLES.MMOV.SAMPLE]AMERICA3-JPEG.AVIg0            [SYSHLP.EXAMPLES.MMOV.SAMPLE]CLIP.MPG;            [SYSHLP.EXAMPLES.MMOV.SAMPLE]COUNTDOWN-JPEG2.AVI 2            [SYSHLP.EXAMPLES.MMOV.SAMPLE]PROPS1.WAV    '      B-4 Files Installed on Your Systemn e  S      H                                           Files Installed on Your SystemH                                                      B.1 Installed Files  5               [SYSHLP.EXAMPLES.MMOV.SAMPLE]PROPS2.WAV 5               [SYSHLP.EXAMPLES.MMOV.SAMPLE]PROPS3.WAV 6               [SYSHLP.EXAMPLES.MMOV.SAMPLE]TROPIC1.WAV5               [SYSHLP.EXAMPLES.MMOV.SAMPLE]WORLD2.WAV *               [SYSHLP.EXAMPLES.MMOV.VIDEO]7               [SYSHLP.EXAMPLES.MMOV.VIDEO]AVICOMPRESS.C 3               [SYSHLP.EXAMPLES.MMOV.VIDEO]AVIEASY.Cu5               [SYSHLP.EXAMPLES.MMOV.VIDEO]AVIRECORD.C 9               [SYSHLP.EXAMPLES.MMOV.VIDEO]BUILD_VIDEO.COM_7               [SYSHLP.EXAMPLES.MMOV.VIDEO]COLOR_UTILS.Cu2               [SYSHLP.EXAMPLES.MMOV.VIDEO]COMMON.C7               [SYSHLP.EXAMPLES.MMOV.VIDEO]JPEGCONVERT.Co3               [SYSHLP.EXAMPLES.MMOV.VIDEO]READAVI.C 4               [SYSHLP.EXAMPLES.MMOV.VIDEO]RIFFSHOW.C9               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDDUALRECORD.Ce:               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDEO_README.TXT6               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDFRAMEIN.C7               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDFRAMEOUT.C 3               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDPLAY.C 6               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDPLAYOUT.C5               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDRECORD.Cl8               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDSCREENOUT.C7               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDSTREAMIN.CV8               [SYSHLP.EXAMPLES.MMOV.VIDEO]VIDSTREAMOUT.CD               MULTIMEDIA                                      module-               [SYSHLP]MMOV-V2_2.RELEASE_NOTESN               [SYSHLP]VO.HLP               [SYSLIB]&               [SYSLIB]AUDIOCONTROL.DAT%               [SYSLIB]AUDIOEDITOR.DATu'               [SYSLIB]MMOV$ALPHAVCR.UIDE+               [SYSLIB]MMOV$AUDIOCONTROL.UID '               [SYSLIB]MMOV$DECSOUND.UIDT*               [SYSLIB]MMOV$DIVA_WIDGET.UID'               [SYSLIB]MMOV$ENSAUDIO.EXE '               [SYSLIB]MMOV$JV2VIDEO.EXEn'               [SYSLIB]MMOV$JV3VIDEO.EXEi'               [SYSLIB]MMOV$MSBAUDIO.EXE '               [SYSLIB]MMOV$SOFTJPEG.EXEl+               [SYSLIB]MMOV$VIDEOODYSSEY.UIDn               [SYSLIB]MMOV.OLB               [SYSTEST]i#               [SYSTEST]MMOV$IVP.COM     H                                       Files Installed on Your System B-5 o  .      #      Files Installed on Your System       B.1 Installed Files              [SYSUPD]i+            [SYSUPD]MMOV$PCSI_INSTALL_V7.COMt          B.2 Logical Names  B            The following logical names are entered into the systemB            logical name table when Multimedia Services Version 2.2D            for OpenVMS Alpha is installed. These names are stored inE            the product's startup file. They are automatically entered A            into the system logical name table whenever the systeme7            reboots or whenever the software is invoked.               o  MMOV$INCLUDE  =               Contains header files for developing multimedia                applications.l  $            o  MMOV$EXAMPLES:[000000]  B               Contains examples for developing multimedia applica-5               tions and sample audio and video clips._                                              '      B-6 Files Installed on Your Systemi