 

















                     Compaq_DECprint_Supervisor_(DCPS)_for_OpenVMS_
                     Software Installation Guide

                     Order Number: AA-PSVDG-TE


                     July 2002

                     This guide describes how to install the DECprint
                     Supervisor for OpenVMS software.






                     Revision/Update Information: This guide supersedes
                                                  AA-PSVDF-TE.

                     Operating System & Versions: OpenVMS Alpha,
                                                  Version 6.2, 7.2-
                                                  2, 7.3 or 7.3-1
                                                  OpenVMS VAX, Version
                                                  5.5-2, 7.2 or 7.3

                     Software Version:            Compaq DECprint
                                                  Supervisor (DCPS)
                                                  for OpenVMS, Version
                                                  2.1

                     Compaq Computer Corporation
                     Houston, Texas

 






           __________________________________________________________

            2002 Compaq Information Technologies Group, L.P.

           Compaq, the Compaq logo, Alpha, DCPS, DECnet, OpenVMS, VAX
           and VMS are trademarks of Compaq Information Technologies
           Group, L.P. in the U.S. and/or other countries.

           Microsoft and Windows are trademarks of Microsoft
           Corporation in the U.S. and/or other countries.

           All other product names mentioned herin may be trademarks
           of their respective companies.

           Confidential computer software. Valid license from Compaq
           required for possession, use, or copying. Consistent
           with FAR 12.211 and 12.212, Commercial Computer Software,
           Computer Software Documentation, and Technical Data for
           Commercial Items are licensed to the U.S. Government under
           vendor's standard commercial license.

           Compaq shall not be liable for technical or editorial
           errors or omissions contained herein. The information
           is provided "as is" without warranty of any kind and is
           subject to change without notice. The warranties for
           Compaq products are set forth in the express limited
           warranty statements accompanying such products. Nothing
           herein should be construed as constituting an additional
           warranty.

           The DECprint Supervisor documentation set is available on
           CD-ROM.

 













   ________________________________________________________________

                                                           Contents


   Preface..................................................      v


   1  Before Installing the Software

         1.1   Operating System Version.....................    1-1
         1.2   Disk Space...................................    1-1
         1.3   Related Software.............................    1-2
         1.3.1     DEC C Run-Time Library...................    1-2
         1.3.2     PrintServer Software.....................    1-3
         1.3.3     TCP/IP Networks..........................    1-3
         1.3.4     AppleTalk Networks.......................    1-3
         1.3.5     DDIF Printing............................    1-4
         1.3.6     DEC Image Print-PLUS (ICPS)..............    1-4
         1.4   Mismatched Components........................    1-4

   2  Installing the Software

         2.1   Overview.....................................    2-1
         2.2   VMSINSTAL Conventions........................    2-2
         2.3   Installing the Software......................    2-2

   A  Sample Installation Sessions

   B  System Messages

         B.1   System Message Overview......................    B-1
         B.1.1     Message Format...........................    B-1
         B.1.2     Severity Level...........................    B-2
         B.2   DCPS Installation Messages...................    B-2




                                                                iii

 






     C  Ordering Additional Documentation

           C.1   DECprint Supervisor (DCPS) for OpenVMS.......    C-1
           C.2   PostScript Programming.......................    C-2
           C.3   DIGITAL ANSI-Compliant Level 3 Printing
                 Protocol.....................................    C-2
           C.4   PrintServer Software.........................    C-3

     Index


     Examples

           A-1       Sample Installation on an OpenVMS Alpha
                     System...................................    A-1

           A-2       Sample Upgrade on an OpenVMS VAX
                     System...................................    A-5

     Tables

           1-1       Disk Space Requirements..................    1-2























     iv

 











        ________________________________________________________________

                                                                 Preface



        Intended Audience

              This manual is for system managers responsible for
              installing the DECprint Supervisor (DCPS) for OpenVMS
              printing software. To install the printing software, it is
              necessary to have some experience with:

              o  OpenVMS DCL command language and system management
                 procedures

              o  Procedures and commands in the DECprint Supervisor for
                 OpenVMS System Manager's Guide

              o  VMSINSTAL utility for installing OpenVMS software

              If your printing environment utilizes the network to
              communicate with printers, you must have some knowledge of
              network management tools.

              The DECprint Supervisor for OpenVMS System Manager's Guide
              contains information about postinstallation tasks, such as
              creating queues and customizing your printing environment.












                                                                       v

 






     Conventions

           The following conventions are used throughout this
           document:

           __________________________________________________________
           Convention__Meaning_______________________________________

           UPPERCASE   Uppercase characters indicate DCL commands,
                       qualifiers, and parameters.

           italics     Italic characters are used in command examples
                       to indicate that you are to substitute a word
                       or value of your choice.

           bold        Bold characters are used in examples to show
                       the characters that you should enter as part
                       of the procedure.

           []          Brackets indicate that the enclosed item is
                       optional.

           Ctrl/x      This symbol indicates a control key sequence.
                       Press the key labeled Ctrl while you
                       simultaneously press another key, represented
                       by x.

           <Return>    This symbol indicates that you should press
           ____________the_Return_key._______________________________
















     vi

 









                                                                       1
        ________________________________________________________________

                                          Before Installing the Software



              DECprint Supervisor runs on OpenVMS Alpha and OpenVMS
              VAX systems. The files that are installed on the two
              systems differ. See the Release Notes for a full list
              of the files.

                ________________________Note  ________________________

                Starting with DCPS V2.0, the need for DCPS-OPEN and
                DCPS-PLUS licenses has been eliminated. The right
                to use all features of DCPS is now included with the
                OpenVMS operating system license.

                _____________________________________________________

        1.1 Operating System Version

              DCPS V2.1 is fully supported on currently-supported
              versions of the OpenVMS operating system:

              o  OpenVMS Alpha V6.2, V7.2-2, V7.3 and V7.3-1

              o  OpenVMS VAX V5.5-2, V7.2 and V7.3

              Although DCPS V2.1 will install on systems running OpenVMS
              Alpha V6.1 or later, or OpenVMS VAX V5.5-2 or later,
              customers running OpenVMS versions that are not currently
              supported do so at their own risk.

        1.2 Disk Space

              Depending on whether DECprint Supervisor is installed on
              an Alpha or VAX processor, disk space requirements may
              vary. Table 1-1 lists the disk space requirements.


                                      Before Installing the Software 1-1

 






           Table_1-1_Disk_Space_Requirements_________________________

           Disk space required   Alpha
           for_._._._____________system______VAX_system______________

           Installation          7400        5900 blocks
                                 blocks

           Permanent use         6900        5500 blocks
           ______________________blocks______________________________

           These disk space requirements are approximate, and
           depend on your system environment, disk cluster size,
           configuration and software options.

     1.3 Related Software

           DECprint Supervisor works with other software to create
           a fully functional printing system. Before installing
           DECprint Supervisor, make sure the other application and
           printing software is compatible.

           The following sections detail the software you need. Refer
           to the DECprint Supervisor for OpenVMS Software Product
           Description (SPD) for specific version requirements.

     1.3.1 DEC C Run-Time Library

           DCPS requires that the DEC C run-time library is installed
           on your system. This library is included with the OpenVMS
           operating system starting with OpenVMS V6.1, and in the
           DEC C/C++ Run-Time Components kit. Therefore:

           o  To run on any OpenVMS V6.1 or later system, no
              installation of the DEC C Run-Time Library is required.

           o  To run on OpenVMS VAX V5.5-2 and V6.0 systems, the DEC
              C/C++ Run-Time Components kit must be installed before
              installing DCPS.

              To determine if the DEC C run-time library exists
              on your system, check for the existence of the file
              SYS$STARTUP:CRT$STARTUP.COM. If this file exists, the
              DEC C/C++ Run-Time Components kit has already been
              installed. If it does not, you must install the DEC C
              /C++ Run-Time Components kit before installing DECprint
              Supervisor for OpenVMS.

     1-2 Before Installing the Software

 






                 The DEC C/C++ Run-Time Components kit is included
                 on the DCPS CD-ROM starting with V1.6, and is also
                 available on the OpenVMS VAX Software Product Library
                 CD-ROM distributed by Compaq. Please refer to the DEC
                 C/C++ Run-Time Components documentation for information
                 about installing the kit, starting with Read Before
                 Installing or Using DEC C/C++ Run-Time Components
                 Version 6.0 for OpenVMS VAX Systems.

        1.3.2 PrintServer Software

              To print to a DIGITAL PrintServer printer, the printing
              environment must contain a supporting host system running
              the PrintServer software product.

        1.3.3 TCP/IP Networks

              TCP/IP connections to PrintServer printers using Common
              Printer Access Protocol (CPAP), and connections to other
              printers using the raw TCP/IP socket protocol, require one
              of the following:

              o  Compaq TCP/IP Services for OpenVMS

              o  Process Software MultiNet for OpenVMS

              o  Process Software TCPware for OpenVMS

        1.3.4 AppleTalk Networks

              Printers connected to AppleTalk networks can be accessed
              by the DECprint Supervisor for OpenVMS software, and
              thus be made available to OpenVMS system users as shared
              network printers. This printing system configuration
              requires PATHWORKS for OpenVMS (Macintosh) software.

                ________________________Note  ________________________

                PATHWORKS for OpenVMS (Macintosh) has been retired
                and is no longer supported.

                _____________________________________________________



                                      Before Installing the Software 1-3

 






     1.3.5 DDIF Printing

           To print DDIF encoded bitonal images, DCPS requires that
           either DECwindows or DECimage Application Services (DAS)
           be installed on your system. DAS is only available on
           OpenVMS VAX systems.

     1.3.6 DEC Image Print-PLUS (ICPS)

           DCPS V1.1 and later versions cannot coexist with ICPS
           V1.x software. Installing DCPS replaces the image
           SYS$LIBRARY:TRN$DDIF_IMAGE.EXE. This new image is not
           compatible with the ICPS software.

     1.4 Mismatched Components

           All DCPS executable components attempt to ensure they
           are a matched set. If a mis-match occurs, DCPS reports
           an error when the queue starts. This error occurs when
           a component of a prior (incompatible) software version
           exists in the SYS$SPECIFIC area and newer components
           are installed in the SYS$COMMON area. The error that
           occurs depends on which versions of which components are
           executing. For example:

           o  If the executing version of DCPS$SMB.EXE is V1.1A, and
              all other components are from Version 1.2, then the
              following error occurs on an OpenVMS VAX V5.5-2 system:

              $ start/que atk_1152
              %%%%%%%%%%%  OPCOM  13-FEB-1995 21:38:08.66  %%%%%%%%%%%
              Message from user QUEUE_MANAGE on DAHLIA
              %QMAN-E-SYMDEL, unexpected symbiont process termination

              %%%%%%%%%%%  OPCOM  13-FEB-1995 21:38:08.67  %%%%%%%%%%%
              Message from user QUEUE_MANAGE on DAHLIA
              -SYSTEM-F-ACCVIO, access violation, reason mask=00,
              virtual address=00000000, PC=0001A9B8, PSL=03C00000

           o  If the executing version of DCPS$SMBSHR.EXE is V1.1A,
              and all other components are from Version 1.2, then the
              following error occurs on an OpenVMS VAX system:



     1-4 Before Installing the Software

 






                 %%%%%%%%%%%  OPCOM  13-FEB-1995 21:44:42.40  %%%%%%%%%%%
                 Message from user SYSTEM on DAHLIA
                 Process SYMBIONT_98: %SMBSHRMISMTCH2, Wrong version of
                 DCPS$SMBSHR.EXE

                 %%%%%%%%%%%  OPCOM  13-FEB-1995 21:44:42.51  %%%%%%%%%%%
                 Message from user QUEUE_MANAGE on DAHLIA
                 %QMAN-E-SYMDEL, unexpected symbiont process termination

                 %%%%%%%%%%%  OPCOM  13-FEB-1995 21:44:42.52  %%%%%%%%%%%
                 Message from user QUEUE_MANAGE on DAHLIA
                 -NONAME-F-NOMSG, Message number 064BE124

              o  If the executing version of DCPS$SMBSHR.EXE is V1.1A,
                 and all other components are from Version 1.2, then the
                 following error occurs on an OpenVMS Alpha system:

                 %%%%%%%%%%%  OPCOM   1-FEB-1995 12:20:35.02  %%%%%%%%%%%
                 Message from user QUEUE_MANAGE on DNGBAT
                 %QMAN-E-SYMDEL, unexpected symbiont process termination

                 %%%%%%%%%%%  OPCOM   1-FEB-1995 12:20:35.03  %%%%%%%%%%%
                 Message from user QUEUE_MANAGE on DNGBAT
                 -IMGACT-F-SYMVECMIS, shareable image's symbol vector table
                 mismatch




















                                      Before Installing the Software 1-5

 









                                                                       2
        ________________________________________________________________

                                                 Installing the Software



              This chapter describes how to install DECprint Supervisor
              software using the VMSINSTAL utility. If you are not
              familiar with the VMSINSTAL utility, refer to the OpenVMS
              System Manager's Manual.

        2.1 Overview

              Follow these steps to install the DECprint Supervisor
              (DCPS) for OpenVMS software:

              1. Review all release notes.

              2. Stop each DCPS queue using STOP/QUEUE/NEXT or STOP
                 /QUEUE/RESET if you have existing DCPS queues and
                 do not want the DCPS installation procedure to
                 automatically stop them, or you have DCPS executables
                 in the SYS$SPECIFIC system areas, or you need to apply
                 OpenVMS or other patches that impact DCPS.

              3. Remove any DCPS executables from the SYS$SPECIFIC
                 system areas.

              4. Apply OpenVMS or other patches that impact DCPS,
                 as determined from the DCPS release notes or other
                 sources. If the patches require that you reboot your
                 system, do so after applying the patches.

              5. Install DCPS.

              6. Create or update DCPS$STARTUP.COM, as described in the
                 DECprint Supervisor for OpenVMS System Manager's Guide.
                 For example, add queue definitions to the file and set
                 the value of the DCPS$MAX_STREAMS logical following the
                 examples provided in the procedure.

                                             Installing the Software 2-1

 






           7. Start your DCPS print queues by invoking DCPS$STARTUP.COM.
              The DCPS installation procedure may have restarted
              DCPS queues that it stopped, if you chose to allow
              it to do so. If you changed your DCPS environment or
              DCPS$STARTUP.COM after the DCPS installation procedure
              automatically restarted some queues, you may need
              to stop all DCPS queues and restart them before your
              changes will take effect.


     2.2 VMSINSTAL Conventions

           VMSINSTAL will prompt you for site-specific information.
           Questions are preceded by an asterisk (*) and may be
           followed by default responses enclosed in brackets ([]).
           Enter your response followed by <Return>.

           Press <Return> to enter the default response. If you
           are not sure of the response, enter a question mark
           (?). VMSINSTAL displays explanatory text and repeats the
           prompt.

           Messages specific to the installation of DECprint
           Supervisor software are listed in Appendix B.

     2.3 Installing the Software

              ________________________Note ________________________

              This section does not reproduce all of the text you
              may see on your screen during the installation of
              the DECprint Supervisor software. Sample VMSINSTAL
              installation scripts are shown in Appendix A.

              _____________________________________________________

           To install the software, use the following procedure:

           1. Invoke the VMSINSTAL procedure.

              Enter the following command:

              $ @SYS$UPDATE:VMSINSTAL DCPSpppnnn device-id [OPTIONS N]

              You supply the following information:

              o  DCPSpppnnn is the save set name, with ppp desig-
                 nating the platform (AXP (Alpha) or VAX) and nnn
                 designating the version (for example, 021 for V2.1).

     2-2 Installing the Software

 






                 o  device-id is the name of the device on which you
                    want to mount the media, such as DQA0:.

                 o  OPTIONS N allows you to request release notes.
                    If you do not include the OPTIONS N parameter,
                    VMSINSTAL does not ask you about the release notes.
                    Review the release notes before proceeding with the
                    installation. If you are restarting the installation
                    and have already reviewed the release notes, you do
                    not need to specify OPTIONS N.

                 First, VMSINSTAL displays a banner line with the date
                 and time, and instructions for running the dialog.
                 You may receive one or more of the following warning
                 messages when VMSINSTAL starts up. Exit from the
                 procedure, correct the cause of the warning message,
                 and start the VMSINSTAL procedure again.

                 o  If you are not currently logged in to the SYSTEM
                    account, the following message is displayed:

                    %VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account.

                 o  If processes are running while VMSINSTAL is running,
                    the following message is displayed:

                    %VMSINSTAL-W-ACTIVE, The following processes are still active:
                            process-name

                 Other processes may cause the installation of HELP
                 to fail. When any of these messages are displayed,
                 the following question is displayed to allow you to
                 terminate VMSINSTAL and correct the situation:

                 * Do you want to continue anyway [NO]?

                 Enter YES to continue. If you answer NO, the VMSINSTAL
                 procedure is terminated immediately.

                 You can enter a question mark (?) at this time to
                 display advice from the VMSINSTAL software. For
                 example:

                 The above conditions may cause VMSINSTAL to function improperly.
                 In particular, problems may occur with file ownership if you are not
                 logged into the SYSTEM account.

              2. Ensure that existing software is saved.

                                             Installing the Software 2-3

 






              VMSINSTAL then asks the following question:

              * Are you satisfied with the backup of your system disk [YES]?

              Enter YES to continue, or enter NO to exit VMSINSTAL to
              make a backup and run VMSINSTAL again.

              If you enter a question mark (?) in response to this
              question, VMSINSTAL displays the following explanation:

              VMSINSTAL attempts to ensure that a power failure or system crash
              will not corrupt your system disk.  However, for absolute safety we
              recommend that you back it up before installing new products.  Please
              see the documentation for more information on crashes during
              installation.

           3. Confirm that distribution media is loaded.

              VMSINSTAL asks for confirmation that the distribution
              media has been mounted.

               Please mount the first volume of the set on device-id:
              * Are you ready?

           4. Announce products to be installed.

              VMSINSTAL then announces the products to be installed
              where ppp designates the platform and n.n designates
              the version.

              The following products will be processed:

              DCPSppp Vn.n

                      Beginning installation of DCPSppp Vn.n at 13:45

              %VMSINSTAL-I-RESTORE, Restoring product saveset A

           5. Obtain the release notes.

              If you specified OPTIONS N in the VMSINSTAL command
              line, the following Release Notes options are
              displayed:

              Release notes included with this kit are always copied to SYS$HELP.

              Additional Release Notes Options:

     2-4 Installing the Software

 






                    Release Notes Options:
                           (1) Display release notes
                           (2) Print release notes
                           (3) Both 1 and 2
                           (4) None of the above

                 After you enter the release note option, VMSINSTAL
                 asks whether you want to continue the installation
                 procedure:

                 Do you want to continue the installation [NO]?

                 If you did not include the OPTIONS N portion of the
                 VMSINSTAL command line, VMSINSTAL does not display this
                 question. Instead, the following message is displayed:

                 %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP

              6. Check for active DCPS queues.

                 If DCPS print queues are active while VMSINSTAL
                 is running, messages similar to the following are
                 displayed:

                 %DCPSVAX-W-QUEACTIVE, The following DCPS queues are still active:

                 Queue                     Device                                    Status
                 -----                     ------                                    ------
                 LN09                      DAN::LTA9000:                             IDLE
                 LN17                      DAN::"AppleTalk/Dan's LN17+ps"            IDLE
                 LN40                      DAN::"IP_RawTCP/ln40:6869"                IDLE
                 LPS32                     DAN::"IP_CPAP/lps32.office.genicom.com"   IDLE

                 %DCPSVAX-I-NUMQUEUES, 4 existing DCPS queues, with 4 active

                         Previously installed DCPS queues are still running.
                         Continuing this installation without entering
                         STOP/QUEUE/RESET for each such queue can cause
                         inconsistent behavior among queues and can cause
                         the IVP to fail.

                         Note that if you choose to have this installation
                         procedure automatically stop such queues, and the
                         installation subsequently aborts, this procedure
                         will not automatically restart them.

                 * Do you want these queues automatically stopped and restarted [YES]?

                                             Installing the Software 2-5

 






              If you do not want the installation procedure to
              automatically stop them, you are given the options
              of aborting the installation or continuing with the
              queues active. Continuing is not recommended.

           7. Check for sufficient disk space.

              VMSINSTAL checks to see if the amount of disk space
              required for the installation is available. If the
              space is not available, a message indicates the amount
              of disk space that is required, and the installation
              is aborted. You must allocate sufficient disk space
              and then start the VMSINSTAL procedure again. However,
              if you have already provided enough disk space, the
              installation procedure continues.

           8. Purge extraneous versions of files.

              VMSINSTAL asks if you want to purge any files that are
              being replaced.

              * Do you want to purge files replaced by this installation [YES]?

              Enter YES if you want to save disk space or NO if you
              think the files may still be of use.

              If you enter a question mark (?) in response to this
              query, the following message is displayed:

              During this installation, new files will be provided to replace
              existing versions.  You may purge these older versions to save disk
              space, or keep them if you feel they may be of use.  Purging is
              recommended.

           9. Define DCPS$LAYUP.

              Next, the installation procedure looks for a definition
              of the logical name DCPS$LAYUP in the system table in
              executive mode.

              o  If a definition exists, the following message is
                 displayed:

                 %DCPSppp-I-LAYUPDEF, DCPS$LAYUP is already defined
                 -DCPSppp-I-LAYUPDEF, This installation will use its value

     2-6 Installing the Software

 






                 o  If a definition does not exist, the procedure asks
                    you for a definition. Press <Return> to select the
                    default, SYS$SYSROOT:[SYSHLP.EXAMPLES.DCPS], or
                    enter a directory specification where the system
                    layup definition files should be stored.

                    * Full definition for DCPS$LAYUP [SYS$SYSROOT:[SYSHLP.EXAMPLES.DCPS]]:

                    The procedure will validate the definition you
                    provide. If you do not accept the default location
                    and the specified directory does not exist, the
                    procedure will ask you if you want to create it:

                    DISK$USER:[MY-LAYUP-DIR] does not exist.

                    * Create it? [N]?

                    If you answer NO, the procedure will ask again for a
                    definition.

             10. Create directories.

                 VMSINSTAL then attempts to create several directories.
                 If they already exist, it displays additional messages
                 indicating this:

                 %VMSINSTAL-I-SYSDIR, This product creates system disk directory
                      VMI$ROOT:[SYSTEST.DCPS].
                 %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.DCPS] already exists
                 %VMSINSTAL-I-SYSDIR, This product creates system disk directory
                      VMI$ROOT:[SYSHLP.EXAMPLES.DCPS].
                 %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.DCPS] already exists
                 %VMSINSTAL-I-SYSDIR, This product creates system disk directory
                      VMI$ROOT:[SYSHLP.EXAMPLES.DCPS.NETPRINT].
                 %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.DCPS.NETPRINT] already exists

             11. Make sure the queue manager is running.

                 VMSINSTAL checks to see if the queue manager is running
                 on your system.

                 If the queue manager is not present, the Installation
                 Verification Procedure (IVP) does not run, and the
                 following messages are displayed on your screen:

                 %DCPSppp-I-NOQUEMGR, System queue manager is not running
                 -DCPSppp-I-NOQUEMGR, IVP will NOT run.  Installation continuing ...

                 The queue manager must be running if you want the
                 installation to run the IVP.

                                             Installing the Software 2-7

 






          12. Stop queues.

              At this point, VMSINSTAL displays the following message
              on your screen:

              %DCPSppp-I-NOQUEST, No further questions will be asked.

              VMSINSTAL stops active DCPS queues, if any and if
              desired.

              %DCPSppp-I-STOPQUEUES, Stopping queues previously reported as active.

          13. Restore the remaining save sets. As it restores each
              save set, VMSINSTAL reports on its progress:

              VMSINSTAL-I-RESTORE, Restoring product saveset B ...
              VMSINSTAL-I-RESTORE, Restoring product saveset C ...

              This operation may require up to 10 minutes to
              complete.

              When all the save sets have been restored, VMSINSTAL
              instructs you to perform postinstallation procedures.
              Refer to the DECprint Supervisor for OpenVMS System
              Manager's Guide for full instructions.

              Next, VMSINSTAL moves the files from the temporary
              locations used during installation to their permanent
              directories.

              %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target
              directories...

          14. Verify a successful software loading procedure.

              The IVP verifies that the software was loaded properly.
              If the system queue manager is running, the IVP runs
              automatically and VMSINSTAL performs the following:

              1. Creates a temporary print queue

              2. Queues the test files in [SYSTEST.DCPS] to the
                 temporary print queue DCPS$IVP_TEST

              3. Displays messages similar to the following:

     2-8 Installing the Software

 






                 Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43) started on DCPS$IVP_TEST
                 %DCPS-I-JOBSTART, Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43)
                       started on DCPS$IVP_TEST

                 Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43) completed
                 Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44) started on DCPS$IVP_TEST
                 %DCPS-I-JOBSTART, Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44)
                       started on DCPS$IVP_TEST

                 Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44) completed
                 Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) started on DCPS$IVP_TEST
                 %DCPS-I-JOBSTART, Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45)
                       started on DCPS$IVP_TEST

                 Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) completed
                 Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46) started on DCPS$IVP_TEST
                 %DCPS-I-JOBSTART, Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46)
                       started on DCPS$IVP_TEST

                 Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46) completed
                 Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47) started on DCPS$IVP_TEST
                 %DCPS-I-JOBSTART, Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47)
                       started on DCPS$IVP_TEST

                 Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47) completed
                 Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48) started on DCPS$IVP_TEST
                 %DCPS-I-JOBSTART, Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48)
                       started on DCPS$IVP_TEST

                 Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48) completed
                 Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) started on DCPS$IVP_TEST
                 %DCPS-I-JOBSTART, Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49)
                       started on DCPS$IVP_TEST

                 Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) completed

                ________________________Note  ________________________

                The IVP does not produce any hardcopy output.

                _____________________________________________________

                 The IVP procedure automatically deletes the temporary
                 queue when the IVP completes. You can print the IVP
                 test files to a real printer later. (Refer to the
                 DECprint Supervisor for OpenVMS System Manager's
                 Guide.)

                                             Installing the Software 2-9

 






              You can also manually invoke the IVP after the
              installation by entering:

              $ @SYS$TEST:DCPS$IVP

              VMSINSTAL issues an informational message when the IVP
              is completed:

                      IVP successful for OpenVMS DECprint Supervisor for OpenVMS Software

          15. Restart queues.

              VMSINSTAL restarts previously stopped queues if
              the installation is successful and issues its final
              messages:

              %DCPSppp-I-STARTQUEUES, Restarting queues previously reported as active.

                      Installation of DCPSppp Vn.n completed at 14:04

                      VMSINSTAL procedure done at 14:08
              $

          16. Where to go from here.

              Refer to the DECprint Supervisor for OpenVMS System
              Manager's Guide for instructions on how to create print
              queues and customize your printing environment.

















     2-10 Installing the Software

 









                                                                       A
        ________________________________________________________________

                                            Sample Installation Sessions




              This appendix shows sample installations of the DECprint
              Supervisor software on both OpenVMS Alpha and VAX systems,
              with and without the DCPS software already present on the
              system.

              Example A-1 shows a sample of an initial installation
              of the DECprint Supervisor software on an OpenVMS Alpha
              system. Example A-2 shows a sample upgrade of the DECprint
              Supervisor software on an OpenVMS VAX system.

        Example A-1 Sample Installation on an OpenVMS Alpha System

        $ @SYS$UPDATE:VMSINSTAL DCPSAXP CDROM: OPTIONS N

                OpenVMS Alpha Software Product Installation Procedure V7.3-1

        It is 15-MAR-2002 at 23:02.

        Enter a question mark (?) at any time for help.

        %VMSINSTAL-W-ACTIVE, The following processes are still active:
                ANDERSON
                KAMATH
                SCHULLMAN
        * Do you want to continue anyway [NO]? Y
        * Are you satisfied with the backup of your system disk [YES]?

        The following products will be processed:

          DCPSAXP V2.1

                Beginning installation of DCPSAXP V2.1 at 23:02

                                                     Cont'd on next page

                                        Sample Installation Sessions A-1

 






     Example A-1 (Cont.) Sample Installation on an OpenVMS Alpha
                         System

     %VMSINSTAL-I-RESTORE, Restoring product save set A ...

         Release notes included with this kit are always copied to SYS$HELP.

         Additional Release Notes Options:

             1.  Display release notes
             2.  Print release notes
             3.  Both 1 and 2
             4.  None of the above

     * Select option [2]: 4

     * Do you want to continue the installation [NO]? Y
     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

          -------------------------------------------------------------------
          Compaq DECprint Supervisor (DCPS) for OpenVMS
          V2.1 Installation Procedure

          -------------------------------------------------------------------
           2002 Compaq Information Technologies Group, L.P.

          Compaq and the Compaq logo are trademarks of Compaq Information
          Technologies Group, L.P. in the U.S. and/or other countries.

          Confidential computer software.  Valid license from Compaq required
          for possession, use or copying.  Consistent with FAR 12.211 and
          12.212, Commercial Computer Software, Computer Software
          Documentation, and Technical Data for Commercial Items are licensed
          to the U.S. Government under vendor's standard commercial license.
          -------------------------------------------------------------------

     * Do you want to purge files replaced by this installation [YES]?

                                                  Cont'd on next page






     A-2 Sample Installation Sessions

 






        Example A-1 (Cont.) Sample Installation on an OpenVMS Alpha
                            System

        * Full definition for DCPS$LAYUP [SYS$SYSROOT:[SYSHLP.EXAMPLES.DCPS]]:
        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
            VMI$ROOT:[SYSTEST.DCPS].
        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
            VMI$ROOT:[SYSHLP.EXAMPLES.DCPS].
        %DCPSAXP-I-ESTTIME, This installation will take between 1 and 10 minutes.
        %DCPSAXP-I-NOQUEST, No further questions will be asked.
        %VMSINSTAL-I-RESTORE, Restoring product save set B ...
        %VMSINSTAL-I-RESTORE, Restoring product save set C ...

        Software installer:

                Starting with DCPS V2.0, the need for DCPS-OPEN and DCPS-PLUS
                licenses has been eliminated.  The right to use all features of
                DCPS is now included with the OpenVMS operating system license.

                Please remember to copy SYS$STARTUP:DCPS$STARTUP.TEMPLATE to
                SYS$STARTUP:DCPS$STARTUP.COM.  Then edit the resulting copy,
                following the instructions contained within it, to define
                your DCPS environment and queue characteristics.  When done,
                execute the file to establish and start the DCPS queues.
                Also remember to edit SYS$MANAGER:SYSTARTUP_VMS.COM so that
                DCPS$STARTUP.COM is automatically run at system startup time.

                DCPS$STARTUP.COM should be executed after all printer devices
                and interconnects are running.  Below is a summary list:

                  printers via TCP/IP:      after TCP is started
                  printers via LAT:         after LAT devices are created
                  printers via AppleTalk:   after the AppleTalk driver is loaded
                  PrintServers via DECnet:  after DECnet is started

        %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
        %DCPS-I-IVP, Beginning IVP...

             -------------------------------------------------------------------
             Compaq DECprint Supervisor (DCPS) for OpenVMS
             V2.1 Installation Verification Procedure

             -------------------------------------------------------------------
              2002 Compaq Information Technologies Group, L.P.

                                                     Cont'd on next page

                                        Sample Installation Sessions A-3

 






     Example A-1 (Cont.) Sample Installation on an OpenVMS Alpha
                         System

          Compaq and the Compaq logo are trademarks of Compaq Information
          Technologies Group, L.P. in the U.S. and/or other countries.

          Confidential computer software.  Valid license from Compaq required
          for possession, use or copying.  Consistent with FAR 12.211 and
          12.212, Commercial Computer Software, Computer Software
          Documentation, and Technical Data for Commercial Items are licensed
          to the U.S. Government under vendor's standard commercial license.
          -------------------------------------------------------------------

          IVP using Version V2.1 of DECprint Supervisor

     Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 104) started on DCPS$IVP_TEST
     %DCPS-I-JOBSTART, Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 104)
           started on DCPS$IVP_TEST

     Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 104) completed
     Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 105) started on DCPS$IVP_TEST
     %DCPS-I-JOBSTART, Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 105)
           started on DCPS$IVP_TEST

     Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 105) completed
     Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 106) started on DCPS$IVP_TEST
     %DCPS-I-JOBSTART, Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 106)
           started on DCPS$IVP_TEST

     Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 106) completed
     Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 107) started on DCPS$IVP_TEST
     %DCPS-I-JOBSTART, Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 107)
           started on DCPS$IVP_TEST

     Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 107) completed
     Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 108) started on DCPS$IVP_TEST
     %DCPS-I-JOBSTART, Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 108)
           started on DCPS$IVP_TEST

     Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 108) completed
     Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 109) started on DCPS$IVP_TEST
     %DCPS-I-JOBSTART, Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 109)
           started on DCPS$IVP_TEST

                                                  Cont'd on next page

     A-4 Sample Installation Sessions

 






        Example A-1 (Cont.) Sample Installation on an OpenVMS Alpha
                            System

        Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 109) completed
        Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 110) started on DCPS$IVP_TEST
        %DCPS-I-JOBSTART, Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 110)
              started on DCPS$IVP_TEST

        Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 110) completed

             IVP successful for DECprint Supervisor V2.1

                Installation of DCPSAXP V2.1 completed at 23:04

            Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

            Creating installation data file: VMI$ROOT:[SYSUPD]DCPSAXP014.VMI_DATA

                VMSINSTAL procedure done at 23:05

        $

        Example A-2 Sample Upgrade on an OpenVMS VAX System

        $ @SYS$UPDATE:VMSINSTAL DCPSVAX CDROM: OPTIONS N

                OpenVMS VAX Software Product Installation Procedure V7.3

        It is 13-MAR-2002 at 12:24.

        Enter a question mark (?) at any time for help.

        * Are you satisfied with the backup of your system disk [YES]?

        The following products will be processed:

          DCPSVAX V2.1

                Beginning installation of DCPSVAX V2.1 at 12:24

        %VMSINSTAL-I-RESTORE, Restoring product save set A ...

            Release notes included with this kit are always copied to SYS$HELP.

                                                     Cont'd on next page

                                        Sample Installation Sessions A-5

 






     Example A-2 (Cont.) Sample Upgrade on an OpenVMS VAX System

         Additional Release Notes Options:

             1.  Display release notes
             2.  Print release notes
             3.  Both 1 and 2
             4.  None of the above

     * Select option [2]: 4
     * Do you want to continue the installation [NO]? Y
     %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

          -------------------------------------------------------------------
          Compaq DECprint Supervisor (DCPS) for OpenVMS
          V2.1 Installation Procedure

          -------------------------------------------------------------------
           2002 Compaq Information Technologies Group, L.P.

          Compaq and the Compaq logo are trademarks of Compaq Information
          Technologies Group, L.P. in the U.S. and/or other countries.

          Confidential computer software.  Valid license from Compaq required
          for possession, use or copying.  Consistent with FAR 12.211 and
          12.212, Commercial Computer Software, Computer Software
          Documentation, and Technical Data for Commercial Items are licensed
          to the U.S. Government under vendor's standard commercial license.
          -------------------------------------------------------------------

     %DCPSVAX-W-QUEACTIVE, The following DCPS queues are still active:

     Queue                     Device                                    Status
     -----                     ------                                    ------
     LN09                      DAN::LTA9000:                             IDLE
     LN17                      DAN::"AppleTalk/Dan's LN17+ps"            IDLE
     LN40                      DAN::"IP_RawTCP/ln40:6869"                IDLE

     %DCPSVAX-I-NUMQUEUES, 4 existing DCPS queues, with 3 active

             Previously installed DCPS queues are still running.
             Continuing this installation without entering
             STOP/QUEUE/RESET for each such queue can cause
             inconsistent behavior among queues and can cause
             the IVP to fail.

                                                  Cont'd on next page

     A-6 Sample Installation Sessions

 






        Example A-2 (Cont.) Sample Upgrade on an OpenVMS VAX System

                Note that if you choose to have this installation
                procedure automatically stop such queues, and the
                installation subsequently aborts, this procedure
                will not automatically restart them.

        * Do you want these queues automatically stopped and restarted [YES]?

        * Do you want to purge files replaced by this installation [YES]?

        %DCPSVAX-I-LAYUPDEF, DCPS$LAYUP is already defined
        -DCPSVAX-I-LAYUPDEF, This installation will use its value
        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
             VMI$ROOT:[SYSTEST.DCPS].
        %CREATE-I-EXISTS, VMI$ROOT:[SYSTEST.DCPS] already exists
        %VMSINSTAL-I-SYSDIR, This product creates system disk directory
             VMI$ROOT:[SYSHLP.EXAMPLES.DCPS].
        %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.DCPS] already exists
        %DCPSVAX-I-ESTTIME, This installation will take between 1 and 10 minutes,
        -DCPSVAX-I-ESTTIME,  excluding time needed to stop and restart active queues.
        %DCPSVAX-I-NOQUEST, No further questions will be asked.
        %DCPSVAX-I-STOPQUEUES, Stopping queues previously reported as active.
        %VMSINSTAL-I-RESTORE, Restoring product save set B ...
        %VMSINSTAL-I-RESTORE, Restoring product save set C ...

        Software installer:

                Starting with DCPS V2.0, the need for DCPS-OPEN and DCPS-PLUS
                licenses has been eliminated.  The right to use all features of
                DCPS is now included with the OpenVMS operating system license.

                Please remember to copy SYS$STARTUP:DCPS$STARTUP.TEMPLATE to
                SYS$STARTUP:DCPS$STARTUP.COM.  Then edit the resulting copy,
                following the instructions contained within it, to define
                your DCPS environment and queue characteristics.  When done,
                execute the file to establish and start the DCPS queues.
                Also remember to edit SYS$MANAGER:SYSTARTUP_VMS.COM so that
                DCPS$STARTUP.COM is automatically run at system startup time.

                DCPS$STARTUP.COM should be executed after all printer devices
                and interconnects are running.  Below is a summary list:

                                                     Cont'd on next page

                                        Sample Installation Sessions A-7

 






     Example A-2 (Cont.) Sample Upgrade on an OpenVMS VAX System

               printers via TCP/IP:      after TCP is started
               printers via LAT:         after LAT devices are created
               printers via AppleTalk:   after the AppleTalk driver is loaded
               PrintServers via DECnet:  after DECnet is started

             If you are converting CPS queues to DCPS, you may want to run
             the utility SYS$STARTUP:CPS_TO_DCPS_STARTUP.COM instead of
             editing the startup template.  This utility will read your
             CPS startup file, change the queue definitions to use DCPS$SMB
             and its library and logical names, and write out a new DCPS
             startup file.

     %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
     %DCPS-I-IVP, Beginning IVP...

          -------------------------------------------------------------------
          Compaq DECprint Supervisor (DCPS) for OpenVMS
          V2.1 Installation Verification Procedure

          -------------------------------------------------------------------
           2002 Compaq Information Technologies Group, L.P.

          Compaq and the Compaq logo are trademarks of Compaq Information
          Technologies Group, L.P. in the U.S. and/or other countries.

          Confidential computer software.  Valid license from Compaq required
          for possession, use or copying.  Consistent with FAR 12.211 and
          12.212, Commercial Computer Software, Computer Software
          Documentation, and Technical Data for Commercial Items are licensed
          to the U.S. Government under vendor's standard commercial license.
          -------------------------------------------------------------------

          IVP using Version V2.1 of DECprint Supervisor

     Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43) started on DCPS$IVP_TEST
     %DCPS-I-JOBSTART, Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43)
           started on DCPS$IVP_TEST

     Job DCPS$IVP_POST (queue DCPS$IVP_TEST, entry 43) completed
     Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44) started on DCPS$IVP_TEST
     %DCPS-I-JOBSTART, Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44)
           started on DCPS$IVP_TEST

                                                  Cont'd on next page

     A-8 Sample Installation Sessions

 






        Example A-2 (Cont.) Sample Upgrade on an OpenVMS VAX System

        Job DCPS$IVP_ANSI (queue DCPS$IVP_TEST, entry 44) completed
        Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) started on DCPS$IVP_TEST
        %DCPS-I-JOBSTART, Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45)
              started on DCPS$IVP_TEST

        Job DCPS$IVP_REGIS (queue DCPS$IVP_TEST, entry 45) completed
        Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46) started on DCPS$IVP_TEST
        %DCPS-I-JOBSTART, Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46)
              started on DCPS$IVP_TEST

        Job DCPS$IVP_TEK4014 (queue DCPS$IVP_TEST, entry 46) completed
        Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47) started on DCPS$IVP_TEST
        %DCPS-I-JOBSTART, Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47)
              started on DCPS$IVP_TEST

        Job DCPS$IVP_PCL (queue DCPS$IVP_TEST, entry 47) completed
        Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48) started on DCPS$IVP_TEST
        %DCPS-I-JOBSTART, Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48)
        started on DCPS$IVP_TEST

        Job DCPS$IVP_PROPRINTER (queue DCPS$IVP_TEST, entry 48) completed
        Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) started on DCPS$IVP_TEST
        %DCPS-I-JOBSTART, Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49)
              started on DCPS$IVP_TEST

        Job DCPS$IVP_LIST (queue DCPS$IVP_TEST, entry 49) completed

             IVP successful for DECprint Supervisor V2.1

        %DCPSVAX-I-STARTQUEUES, Restarting queues previously reported as active.

                Installation of DCPSVAX V2.1 completed at 12:27

                VMSINSTAL procedure done at 12:27

        $







                                        Sample Installation Sessions A-9

 









                                                                       B
        ________________________________________________________________

                                                         System Messages



              This appendix describes the DECprint Supervisor messages
              in the following sections:

              o  Overview of messages, Section B.1

              o  DCPS Installation Messages, Section B.2

        B.1 System Message Overview

        B.1.1 Message Format

              DECprint Supervisor system messages have one of the
              following formats:

              %fac-s-ident, text
              -fac-s-ident, text

              __________________________________________________________
              Code___Meaning____________________________________________

              %      The prefix for all primary messages

              -      The prefix for all continuation messages

              fac    The facility code, which should be DCPS

              s      The severity level of the message

              ident  An abbreviation of the message text

              text___The_expanded_text_of_the_message___________________




                                                     System Messages B-1

 






     B.1.2 Severity Level

           The severity levels of DECprint Supervisor system messages
           are defined as follows:

           __________________________________________________________
           Code_Meaning______________________________________________

           S    Success - successful completion of the request

           I    Informational - may require user action

           W    Warning - request may not have completed and may
                require user action

           E    Error - system encountered an error that may be
                recoverable

           F    Fatal - system encountered a fatal error and cannot
           _____continue_processing_this_request_____________________

     B.2 DCPS Installation Messages

           The following DCPS message descriptions are alphabetized
           by the ident portion of the message. The message severity
           level and text are also shown, while the prefix and
           facility designation (DCPSppp are omitted. If you receive
           a message from a facility other than DCPS, refer to the
           OpenVMS System Messages: Companion Guide for Help Message
           Users for the message description or use the online help
           message utility with the command HELP /MESSAGE.

       E-BADSPEC, File spec LPS$SINGLEHOLES.LUP cannot be parsed

         Explanation: The current definition of the logical name
         DCPS$LAYUP is invalid, possibly because of an incorrect
         answer given to the question about the location of layup
         files in an earlier DCPS installation. (DCPS V1.6 and later
         now validate such responses; see the Release Notes for more
         information.)

         User Action: Deassign the logical name with the command:

         $ DEASSIGN /SYSTEM /EXECUTIVE_MODE DCPS$LAYUP

         Then start the DCPS installation again and you will be
         prompted for the location for the layup files.

     B-2 System Messages

 






         E-BADVMSVER, This product requires OpenVMS version version or
            later to install

            Explanation: The DCPS software requires a later version of
            the OpenVMS operating system.

            User Action: Upgrade your operating system to the correct
            version.

         I-ESTTIME, This installation will take between 1 and 10
            minutes,
         I-ESTTIME, excluding time needed to stop and restart active
            queues.

            Explanation: This informational message estimates the time
            it will take to install the software.

            User Action: No action is required.

         W-HIDES, If these files remain, they will be used instead of
            the
         W-HIDES, DCPS product files you are installing now, and the
            IVP

            Explanation: DECprint Supervisor for OpenVMS warns you that
            the existing DCPS files in SYS$SPECIFIC directories will be
            used instead of the latest ones.

            User Action: Remove or rename the listed DCPS files from
            the SYS$SPECIFIC directories.

         E-INVDIRSPE, invalid directory specification

            Explanation: The syntax of the directory specified is not
            correct.

            User Action: Specify a directory with correct syntax.

         I-LAYUPDEF, DCPS$LAYUP is already defined.
         I-LAYUPDEF, This installation will use its value.

            Explanation: The installation uses the existing logical
            name for DCPS$LAYUP.

            User Action: No action is required.

                                                     System Messages B-3

 






       I-NOHELP, There is no help in this install procedure.
       I-NOHELP, Please refer to the Software Installation Guide.

         Explanation: This informational messages states that no
         help is available.

         User Action: Refer to the Software Installation Guide for
         more information.

       I-NOQUEMGR, System queue manager is not running.
       I-NOQUEMGR, IVP will NOT be run. Installation continuing.

         Explanation: The queue manager is not running on your sys-
         tem. The installation will continue, but the Installation
         Verification Procedure cannot run.

         User Action: After the installation, start the queue man-
         ager and then manually invoke the IVP (@SYS$TEST:DCPS$IVP).

       I-NOQUEST, No further questions will be asked

         Explanation: The VMSINSTAL procedure will continue from
         this point without requiring further input from you.

         User Action: No action is required.

       W-NORSTRT, Automatically stopped queues have not been
         restarted

         Explanation: VMSINSTAL has not restarted queues that it
         automatically stopped.

         User Action: Resolve the problem that caused the instal-
         lation to terminate abnormally, and then manually restart
         the queues that the DCPS installation procedure previously
         listed as active.

       E-NOSUCHDEV, no such device available

         Explanation: The device specified does not exist.

         User Action: Specify a device that exists on your system.

       E-NO_DECC_RTL, DEC C run-time library is not installed.

         Explanation: There is no DEC C run-time library on your
         system.

         User Action: Install the DEC C/C++ Run-Time Components kit.

     B-4 System Messages

 






         E-NO_QUEMAN, This product requires the queue management
            facility to install.

            Explanation: The queue manager could not be found. The
            installation procedure is aborted.

            User Action: Start the queue manager. For information
            refer to the OpenVMS System Management Utilities Reference
            Manual.

         E-NO_SPACE, This product requires number blocks of disk space
            to install.

            Explanation: There are not enough free disk blocks
            to install this software. The installation procedure
            terminates.

            User Action: Ensure that you have at least the specified
            number of free disk blocks and restart the installation.

         I-NUMQUEUES, existing-number existing DCPS queues, with
            active-number active.

            Explanation: This message informs you of the number of DCPS
            queues you have and how many of them are active (that is,
            not stopped).

            User Action: No action is required.

         W-PURGW, Purging files may leave running queues with no image
         W-PURGW, file and the IVP may fail.

            Explanation: Purging DCPS files while multistream DCPS
            symbionts are still active can cause problems.

            User Action: Avoid purging existing files, or stop all
            active queues before proceeding with the installation.

         I-QSCANNING, Looking for existing DCPS print queues...

            Explanation: This informational message tells you that the
            installation procedure is checking for print queues that
            already exist.

            User Action: No action is required.

                                                     System Messages B-5

 






       W-QUEACTIVE, The following queues are still active:

         Explanation: The installation procedure found some DCPS
         queues still active, as listed in subsequent lines. If you
         do not stop the active queues, the installation may fail or
         interfere with jobs that are currently printing.

         User Action: When subsequently asked, allow VMSINSTAL
         to automatically stop the queues, or manually stop them
         yourself and restart the installation procedure. If some of
         the queues are not in an idle state, you may wish to wait
         until all jobs have finished printing.

       I-STARTQUEUES, Restarting queues previously reported as active

         Explanation: VMSINSTAL is currently restarting all queues
         it had previously reported as active.

         Explanation: No action is required.

       I-STOPQUEUES, Stopping queues previously reported as active

         Explanation: VMSINSTAL is currently stopping all queues it
         had previously reported as active.

         User Action: No action is required.

       W-SYSPF, This system contains DCPS images in SYS$SPECIFIC
         areas:

         Explanation: Your system has one or more DCPS executable
         images in a SYS$SPECIFIC directory, as listed in subsequent
         lines. The new images that you are about to install will
         not be used because of the presence of the SYS$SPECIFIC
         versions.

         User Action: Delete or rename the DCPS files in the
         SYS$SPECIFIC directories, so that new ones in SYS$COMMON
         will be used.

       F-WRONGARCH, This product will only install on OpenVMS
         platform.

         Explanation: You have attempted to install the kit on the
         wrong platform.

         User Action: Install the kit on either an Alpha or VAX
         platform, as indicated by the message, or use a different
         kit for the current platform.

     B-6 System Messages

 









                                                                       C
        ________________________________________________________________

                                       Ordering Additional Documentation



              This appendix lists Compaq software documents and
              documentation kits associated with PostScript printers,
              and their respective order numbers.

        C.1 DECprint Supervisor (DCPS) for OpenVMS

              o  Hardcopy documentation (order number: QA-09NAA-GZ)

                    Software Installation Guide
                    System Manager's Guide
                    User's Guide

              o  CD-ROM documentation and software (order number: QA-
                 09NAB-H8)

                 -  Software

                       DECprint Supervisor (DCPS) for OpenVMS Alpha V2.1
                       DECprint Supervisor (DCPS) for OpenVMS VAX V2.1

                 -  Documentation

                       Release Notes
                       Software Installation Guide
                       Software Product Description (SPD)
                       System Manager's Guide
                       User's Guide

                    Documentation is provided in the following formats:

                       Bookreader
                       HTML (Hypertext Markup Language)
                       PDF (Acrobat Portable Document Format)
                       PS (PostScript)
                       Text

                                   Ordering Additional Documentation C-1

 






     C.2 PostScript Programming

           o  PostScript Language Reference Manual, Second Edition
              [*]
              (order number: AA-HL87A-TE)

           o  PostScript Language Tutorial and Cookbook
              (order number: AA-HL87A-TE)

           o  PrintServer Printers PostScript Level 2 Programmer's
              Supplement
              (order number: EK-PRTPL-PS)

           o  PostScript Printers Programmer's Supplement
              (order number: AA-HL84G-TE)

     C.3 DIGITAL ANSI-Compliant Level 3 Printing Protocol

           Documentation (order number: EK-PPLV3-DK)

           o  DIGITAL ANSI-Compliant Printing Protocol Level 3
              Programming Reference Manual
              (order number: EK-PPLV3-PM)

           o  DIGITAL ANSI-Compliant Printing Protocol Level 3
              Programming Supplement
              (order number: EK-PPLV3-PS)

     C.4 PrintServer Software












           ___________________

           [*]Third  Edition available from Adobe Systems Incorporated

     C-2 Ordering Additional Documentation

 





              __________________________________________________________
              Software
              Document_________Part_Number______________________________

              DIGITAL UNIX     QA-0V9AJ-GZ

              HP-UX            QA-0V9AD-GZ

              IBM-AIX          QA-0V9AE-GZ

              IRIX             QA-0V9AQ-GZ

              OpenVMS          QA-0V9AA-GZ

              Solaris          QA-0V9AK-GZ

              SunOS            QA-0V9AC-GZ

              ULTRIX           QA-0V9AB-GZ

              Windows__________QA-0V9AH-GZ______________________________

























                                   Ordering Additional Documentation C-3

 













     ________________________________________________________________

                                                                Index


     A                                    Installation Verification
     ___________________________            Procedure
     AppleTalk network printing,           See IVP
        1-3                               IVP
                                           how to manually invoke,
     C__________________________              2-10
     Conventions,  vi                      may fail if purging files
     CPAP,  1-3                               ,  B-5
                                           may fail with
     D__________________________              SYS$SPECIFIC files,
     DCPS$LAYUP logical,  2-6                 B-3
     DDIF printing,  1-4                   requires queue manager to
     DEC C Run-time library,                  be running,  B-4

        1-2                               M
     Disk space requirements,             ___________________________
        1-1                               Messages, B-1
     Documentation                         descriptions,  B-2 to B-6
       Compaq/DIGITAL PostScript           format,  B-1
         printers,  C-1                    severity level of,  B-2

     ___________________________          N__________________________

     Error messages                       Network printing
       See Messages                        using AppleTalk,  1-3
                                           using TCP/IP,  1-3

     I__________________________          O
     Installation procedure               ___________________________
       questions, 2-2                     OpenVMS VAX V5.5-2 systems,
       sample session, A-1                  1-2



                                                              Index-1

 






                                           for other software,  1-2
     P__________________________           for printers on AppleTalk
     Printer documentation,  C-1              networks,  1-3
     Printers                              for printers on TCP/IP
       on AppleTalk networks,                 networks,  1-3
         1-3                               operating system version,
       on TCP/IP networks, 1-3                1-1

     PrintServer printers
       requirements, 1-3                  S__________________________

                                          System messages
     Q__________________________           See Messages

     Queues
       for printers on AppleTalk          T__________________________
         networks,  1-3                   TCP/IP
       for printers on TCP/IP              printer connections,  1-3
         networks,  1-3                    requirements,  1-3

     R__________________________          V__________________________

     Raw TCP/IP,  1-3                     VMSINSTAL
     Requirements                          conventions,  2-2
       DEC C Run-time library,             installation questions,
         1-2                                  2-2
       disk space, 1-1


















     Index-2
