 





















                    Online_Documentation_Library________________________
                    CD-ROM User's Guide


                    AA-QDGTC-XE


                    This guide describes how to use the Online
                    Documentation Library CD-ROMs.







                    Platforms Supported:          OpenVMS VAX
                                                  OpenVMS Alpha
                                                  Digital UNIX[R]
                                                  (formerly DEC OSF/1[R])
                                                  ULTRIX VAX and ULTRIX
                                                  RISC

                    Revision/Update Information:  This is a revised
                                                  document.



                    Digital Equipment Corporation
                    Maynard, Massachusetts

 






          ________________________________________________________________
          July 1995

          The optical disc publication and all component parts as
          appearing herein are copyrighted.

          Digital Equipment Corporation makes no representations
          that the use of its products in the manner described in
          this publication will not infringe on existing or future
          patent rights, nor do the descriptions contained in this
          publication imply the granting of licenses to make, use,
          or sell equipment or software in accordance with the
          description.

          Possession, use, or copying of the software described in
          this publication is authorized only pursuant to a valid
          written license from Digital or an authorized sublicensor.

          © Digital Equipment Corporation 1995. All rights reserved.

          The following are trademarks of Digital Equipment
          Corporation: Bookreader, DECwindows, Digital, InfoServer,
          OpenVMS, PATHWORKS, ULTRIX, VAX, VAXcluster, VAX DOCUMENT,
          VMS, and the DIGITAL logo.

          The following are third-party trademarks:

          PostScript is a registered trademark of Adobe Systems,
          Incorporated.
          Motif and OSF/1 are registered trademarks of the Open
          Software Foundation, Inc.
          UNIX is a registered trademark in the United States and
          other countries, licensed exclusively through X/Open
          Company, Ltd.

          All other trademarks and registered trademarks are the
          property of their respective holders.

          This document is available on CD-ROM.

          This document was prepared using VAX DOCUMENT Version 2.1.

 














  _________________________________________________________________

                                                           Contents



  Preface...................................................      v

  1  Overview of the CD-ROM User's Guide

        1.1   About These CD-ROMs ..........................    1-1
        1.1.1     Before Using the CD-ROMs..................    1-1
        1.1.2     Handling the CD-ROMs......................    1-1
        1.2   Getting Started with Bookreader...............    1-2

  2  OpenVMS VAX Online Documentation Library

        2.1   Required Environment..........................    2-1
        2.2   Mounting and Controlling Access to a CD-ROM...    2-1
        2.3   Enabling Access to Online Documentation.......    2-2
        2.3.1     Executing BOOKBROWSER.COM.................    2-2
        2.3.2     Providing Clusterwide Access to Online
                  Documentation.............................    2-3
        2.4   Reading Books on the CD-ROMs .................    2-3
        2.4.1     Redefining DECW$BOOK......................    2-3
        2.4.2     Defining DECW$BOOKSHELF...................    2-4
        2.4.3     Accessing CD-ROMs Simultaneously..........    2-5
        2.4.4     Making a CD-ROM the Default Library.......    2-5
        2.4.5     Running Bookreader........................    2-6
        2.5   Printing a Listing of Products................    2-6










                                                                iii

 







    3  OpenVMS Alpha Online Documentation Library

          3.1   Required Environment..........................    3-1
          3.2   Mounting and Controlling Access to a CD-ROM...    3-1
          3.3   Enabling Access to Online Documentation.......    3-2
          3.3.1     Executing BOOKBROWSER.COM.................    3-2
          3.3.2     Providing Clusterwide Access to Online
                    Documentation.............................    3-3
          3.4   Reading Books on the CD-ROM...................    3-3
          3.4.1     Redefining DECW$BOOK......................    3-3
          3.4.2     Defining DECW$BOOKSHELF...................    3-4
          3.4.3     Accessing CD-ROMs Simultaneously..........    3-5
          3.4.4     Making a CD-ROM the Default Library.......    3-5
          3.4.5     Running Bookreader........................    3-6
          3.5   Printing a Listing of Products................    3-6

    4  Digital UNIX Online Documentation Library

          4.1   Required Environment..........................    4-1
          4.2   Mounting and Controlling Access to a CD-ROM
                ..............................................    4-1
          4.3   Enabling Access to Online Documentation.......    4-4
          4.3.1     Registering Bookbrowser...................    4-4
          4.4   Reading Books on the CD-ROMs..................    4-5
          4.4.1     Specifying Bookreader Libraries...........    4-5
          4.4.2     Accessing Bookreader Documentation from a
                    Server....................................    4-6
          4.4.3     Running Bookreader........................    4-7
          4.5   Printing a Listing of Products................    4-7

    5  ULTRIX Online Documentation Library

          5.1   Required Environment..........................    5-1
          5.2   Mounting and Controlling Access to a CD-ROM...    5-1
          5.3   Enabling Access to Online Documentation.......    5-3
          5.3.1     Registering Bookbrowser...................    5-4
          5.4   Reading Books on the CD-ROMs..................    5-4
          5.4.1     Specifying Bookreader Libraries...........    5-4
          5.4.2     Accessing Bookreader Documentation from a
                    Server....................................    5-6
          5.4.3     Running Bookreader........................    5-7
          5.5   Printing a Listing of Products................    5-7



    iv

 







        Index












































                                                                        v

 












        _________________________________________________________________

                                                                  Preface



              This guide provides introductory information about the
              Online Documentation Library CD-ROMs for the following
              platforms:

              o  OpenVMS VAX (see Chapter 2)

              o  OpenVMS Alpha (see Chapter 3)

              o  Digital UNIX (see Chapter 4)

              o  ULTRIX VAX and ULTRIX RISC (see Chapter 5)

        Contents of This Guide

              This guide begins with an overview chapter providing
              information about the Online Documentation Library CD-ROMs
              that is common to all platforms.

              The rest of the guide consists of chapters for each
              operating system, describing:

              o  The environment required to run Bookreader

              o  Mounting a CD-ROM

              o  Providing access to Bookreader documentation on a CD-ROM

              o  Reading books from a CD-ROM

              o  Printing a listing of products




                                                                        v

 







    Ordering Information

          Digital Equipment Corporation provides the following:

          o  Product binaries

             -  Through quarterly library distributions

             -  Through individual kit purchases

          o  Product documentation

             -  Through online documentation CD-ROMs included
                with the software product library or as a separate
                offering

             -  In printed format

          o  ECO and MUP distribution

             -  As a separate consolidated offering released eight
                times a year

             -  On some platforms, as part of the software product
                library at the time of the platform's quarterly
                release

          For individual product ordering information, consult your
          Digital account representative.

          Call 1-800-DIGITAL to place orders in the United States.
          Contact your local Digital subsidiary outside the United
          States.

          Order numbers for software kits, printed manuals, and
          software service are included in product cover letters
          or are listed on the Software Product Descriptions (SPDs).

    Providing Feedback

          Digital welcomes your comments on its products.

          To make it easy for you to provide feedback, Digital has
          created the following Internet mail account:

          cdrom_docs@zko.dec.com

          Use this account to provide comments on this guide, and the
          Online Documentation Library Master Index.

    vi

 







        Conventions

              The following conventions are used in this guide:

              ___________________________________________________________
              Convention____________Meaning______________________________

              For_OpenVMS_platforms:_____________________________________

              UPPERCASE TEXT        Uppercase letters indicate the name
                                    of a command, a file, a parameter, a
                                    procedure, or utility.

              $                     The dollar sign ($) indicates the
                                    DIGITAL Command Language (DCL) prompt
                                    on OpenVMS systems. This prompt may
                                    be different on your system.

              ___________________________________________________________
              For_platforms_based_on_UNIX_systems:_______________________

              %                     The percent sign (%) indicates the
                                    user prompt on ULTRIX and Digital
                                    UNIX systems.

              #                     The pound sign (#) indicates the
                                    system manager prompt on ULTRIX and
                                    Digital UNIX systems.

              Digital UNIX,         References to Digital UNIX and
              Digital UNIX Systems  Digital UNIX Systems refer to the
                                    Digital UNIX (formerly DEC OSF/1)
                                    operating system running on Alpha
                                    processor hardware.

              ___________________________________________________________
              For_all_platforms:_________________________________________

              $ MOUNT DKA400:       Boldface monospace text represents
              VAXDOCNOV941          user input in interactive examples.
              $ mount -r /dev/rz4c
              /mnt

              device-name volume-   Lowercase italics indicate a variable
              label                 string. These variables include
                                    product identifiers, hardware
                                    devices, directory locations, file
              ______________________names,_and_mount_points._____________

                                                                      vii

 










                                                                        1
        _________________________________________________________________

                                      Overview of the CD-ROM User's Guide


              The following information about Digital's Online
              Documentation Library CD-ROMs applies to all platforms.

        1.1 About These CD-ROMs

              Digital's Online Documentation Library CD-ROMs contain
              documentation files designed to be used with Bookreader
              software, the online information access tool.

              These files are located in the [DECW$BOOK] or /decw_book
              directories of the Online Documentation Library
              CD-ROMs. Included in these directories is the Getting
              Started bookshelf, which contains information about using
              Bookreader software.

        1.1.1 Before Using the CD-ROMs

              Make sure you are familiar with the system hardware,
              including the compact disc drive. The Optical Disc Drive
              Owner's Manual for each type of drive contains instructions
              for using the disc drive.

        1.1.2 Handling the CD-ROMs

              The CD-ROMs accompanying this booklet are enclosed in an
              antistatic envelope. To be mounted on your system, a CD-ROM
              must be removed from this envelope and loaded into a caddy.
              In handling the CD-ROM, always grasp it by its edges only.

              For information about inserting the CD-ROM in the disc
              drive, refer to the Optical Disc Drive Owner's Manual.





                                  Overview of the CD-ROM User's Guide 1-1

 



    Overview of the CD-ROM User's Guide
    1.2 Getting Started with Bookreader


    1.2 Getting Started with Bookreader

          Because you can read the documentation files on these
          CD-ROMs only with Bookreader, you should be familiar with
          how to use Bookreader.

          If you are not familiar with using Bookreader, follow the
          directions for running Bookreader in the chapter that
          describes your operating system. Then return to this
          section and use the following procedure to begin using
          Bookreader from a DECwindows terminal, personal computer,
          or workstation:

          1. Using the mouse, move the pointer to the Getting Started
             topic (bookshelf) in the initial Bookreader window, and
             double-click Mouse Button 1 (MB1) to open the bookshelf.

          2. Double-click MB1 to open the Using Bookreader book.

          3. Double-click MB1 on a contents heading you want to read;
             Bookreader opens a topic window, which displays the text
             of the section you have selected. The Using Bookreader
             Contents remains displayed in the book Contents window.

          4. Navigate through the document using either the Contents
             displayed in the book Contents window or the buttons at
             the bottom of the topic window.

             o  To go to the next topic or screen, click the right
                arrow buttons beside Topic and Screen.

             o  To go to a previous topic or screen, click the left
                arrow buttons beside Topic and Screen.

          5. To close the Using Bookreader book, choose Close Book
             from the File menu in the book Contents window. This
             closes both windows.

          6. To select another book from the Getting Started
             bookshelf, double-click on the appropriate title.

          7. To exit Bookreader, choose Exit or Quit from the File
             menu in the Bookreader window.


    1-2 Overview of the CD-ROM User's Guide

 










                                                                        2
        _________________________________________________________________

                                 OpenVMS VAX Online Documentation Library


              This chapter describes how to use the OpenVMS VAX Online
              Documentation Library CD-ROMs.

        2.1 Required Environment

              To read online documentation, you must have the following
              environment:

              o  Bookreader software.

                 Bookreader is packaged with DECwindows Motif, which is
                 part of the OpenVMS VAX operating system environment.

              o  A bitmap DECwindows display (a workstation or a personal
                 computer using PATHWORKS software).

              o  A CD-ROM reader.

        2.2 Mounting and Controlling Access to a CD-ROM

              To access the files on an OpenVMS VAX Software Product
              Library CD-ROM, mount the CD-ROM using the following
              procedure:

              1. Find the appropriate volume label on the face of the
                 CD-ROM.

              2. Load the CD-ROM into a protective caddy.

              3. Insert the caddy into the drive.

              4. Log in to the system manager's account (SYSTEM).

              5. Mount the CD-ROM by entering the MOUNT command in the
                 following format:

                 MOUNT device-name: volume-label

                             OpenVMS VAX Online Documentation Library 2-1

 



    OpenVMS VAX Online Documentation Library
    2.2 Mounting and Controlling Access to a CD-ROM


             For example:

             $ MOUNT DKA400: VAXDOCJAN941

    2.3 Enabling Access to Online Documentation

          Online documentation is made accessible either through
          individual product licenses, which must be registered and
          loaded, or through the use of the BOOKBROWSER.COM command
          procedure.

          If a software product is registered by means of a Product
          Authorization Key (PAK), you do not need to enable the
          online documentation; the product's online documentation is
          already accessible.

          If a software product is not registered (no PAK has
          been installed), execute BOOKBROWSER.COM as described in
          Section 2.3.1 to access the product's online documentation.

          Online documentation is provided as is and is not covered
          by other Digital warranties.

    2.3.1 Executing BOOKBROWSER.COM

          The BOOKBROWSER.COM command procedure registers the
          Bookbrowser PAK on your system and loads the appropriate
          information into your system's software license database.
          Executing BOOKBROWSER.COM provides you with access to all
          documents contained on this CD-ROM at no additional cost.

          To execute BOOKBROWSER.COM, complete the following
          procedure:

          1. Mount the CD-ROM containing the online documentation you
             want to read (see Section 2.2).

          2. Execute BOOKBROWSER.COM by entering a DCL command in the
             following format:

             @device-name:[DECW$BOOK]BOOKBROWSER.COM

             where:

             device-name is the name of the device on which you have
             mounted the CD-ROM.

             For example:

             $  @DKA400:[DECW$BOOK]BOOKBROWSER.COM

    2-2 OpenVMS VAX Online Documentation Library

 



                                 OpenVMS VAX Online Documentation Library
                              2.3 Enabling Access to Online Documentation


        2.3.2 Providing Clusterwide Access to Online Documentation

              Once you have run BOOKBROWSER.COM, you can provide
              clusterwide access to the online documentation CD-ROMs
              in one of two ways:

              o  Reboot the cluster

              o  Invoke the OpenVMS System Management Utility (SYSMAN)

              Both methods load the Bookbrowser PAK into the clusterwide
              license database, but SYSMAN does this without requiring
              you to reboot the cluster.

              To load the Bookbrowser PAK into the clusterwide license
              database, complete the following procedure:

              1. Log in to the SYSTEM account.

              2. Enter the following commands:

                 $ RUN SYS$SYSTEM:SYSMAN
                 SYSMAN> SET ENVIRONMENT/CLUSTER
                 SYSMAN> DO LICENSE LOAD BOOKBROWSER
                 SYSMAN> EXIT

                 The Bookbrowser PAK is loaded into the clusterwide
                 license database.

        2.4 Reading Books on the CD-ROMs

              This section describes how to read books on the OpenVMS VAX
              Online Documentation Library CD-ROMs.

        2.4.1 Redefining DECW$BOOK

              During installation, the DECwindows software automatically
              creates a library directory for Bookreader on your system
              disk. The DECwindows software also defines the logical
              name DECW$BOOK to refer to this directory. When you invoke
              Bookreader, it reads the library file in the directory
              defined by DECW$BOOK.

              To read the library files on the OpenVMS VAX Online
              Documentation Library CD-ROMs, you must redefine the
              DECW$BOOK logical name to refer to the directory
              [DECW$BOOK] on the CD-ROMs.

                             OpenVMS VAX Online Documentation Library 2-3

 



    OpenVMS VAX Online Documentation Library
    2.4 Reading Books on the CD-ROMs


          Use a command in the following format to redefine the
          DECW$BOOK logical name to refer to the [DECW$BOOK]
          directory on the CD-ROM:

          DEFINE/SYSTEM DECW$BOOK device-name:[DECW$BOOK]

          where:

          device-name is the name of the device where the Online
          Documentation Library CD-ROM is mounted.

          For example:

          $ DEFINE/SYSTEM DECW$BOOK DKA400:[DECW$BOOK]

    2.4.2 Defining DECW$BOOKSHELF

          You can also define the DECW$BOOKSHELF logical name to
          direct Bookreader to a file on the CD-ROM that contains
          another structured library.

          To define the DECW$BOOKSHELF logical name, use a command
          in one of the following formats. Substitute the name of
          the device where you have mounted the Online Documentation
          Library CD-ROM for device-name. Also, be sure the file name
          contains the semicolon (;) as shown.

          o  To display a library in which documentation is organized
             into categories:

    DEFINE/SYSTEM DECW$BOOKSHELF device-name:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF;

             For example:

    $ DEFINE/SYSTEM DECW$BOOKSHELF DKA400:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF;

          o  To display a library in which documentation is organized
             alphabetically:

    DEFINE/SYSTEM DECW$BOOKSHELF device-name:[DECW$BOOK]DMASTER.DECW$BOOKSHELF;

             For example:

    $ DEFINE/SYSTEM DECW$BOOKSHELF DKA400:[DECW$BOOK]DMASTER.DECW$BOOKSHELF;

          If you do not define DECW$BOOKSHELF, Bookreader displays
          the default library defined by DECW$BOOK.

    2-4 OpenVMS VAX Online Documentation Library

 



                                 OpenVMS VAX Online Documentation Library
                                        2.4 Reading Books on the CD-ROMs


        2.4.3 Accessing CD-ROMs Simultaneously

              To access books on multiple CD-ROMs, you must define
              DECW$BOOK to point to multiple devices and define
              DECW$BOOKSHELF to point to the library structure of
              your choice. Because all bookshelf files are on all
              CD-ROMs, you can define DECW$BOOKSHELF to point to the
              LIBRARY.DECW$BOOKSHELF on CD-ROM 1.

              To access books on multiple CD-ROMs:

              1. Define DECW$BOOK using a command in the following
                 format:

   DEFINE/SYSTEM DECW$BOOK device-name1:[DECW$BOOK],device-name2:[DECW$BOOK],-
   _$ device-name3:[DECW$BOOK]

                 For example:

   $ DEFINE/SYSTEM DECW$BOOK DKA200:[DECW$BOOK],DKA300:[DECW$BOOK],-
   _$ DKA400:[DECW$BOOK]

              2. Define DECW$BOOKSHELF, using a command in the following
                 format. Make sure the file name contains the semicolon
                 as shown.

   DEFINE/SYSTEM DECW$BOOKSHELF device-name1:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF;

                 For example:

   $ DEFINE/SYSTEM DECW$BOOKSHELF DKA400:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF;

              3. If you invoked Bookreader before you defined the logical
                 names, exit Bookreader and invoke it again.

        2.4.4 Making a CD-ROM the Default Library

              To define a CD-ROM as the default library, add a command
              line defining DECW$BOOK to your startup command procedure
              located in SYS$MANAGER.

              Add a line in the following format:

              DEFINE/SYSTEM DECW$BOOK device-name:[DECW$BOOK]

              For example, the following command line establishes the
              CD-ROM mounted on DKA400 as the library from which books
              will be read each time you start up the system:

              $ DEFINE/SYSTEM DECW$BOOK DKA400:[DECW$BOOK]

                             OpenVMS VAX Online Documentation Library 2-5

 



    OpenVMS VAX Online Documentation Library
    2.4 Reading Books on the CD-ROMs


    2.4.5 Running Bookreader

          To run Bookreader, choose Bookreader from the Applications
          menu on your Session Manager menu.

          If you are not familiar with Bookreader, see Section 1.2
          for introductory instructions on its use.

    2.5 Printing a Listing of Products

          The following files are available in the [README] directory
          on the first CD-ROM:

          o  CDMASTER_INDEX.PS (.TXT)

             A printable version of the OpenVMS VAX Online
             Documentation Library Master Index, which provides a
             listing of all the products in this release

          o  USER_GUIDE.PS (.TXT)

             A printable version of the Online Documentation Library
             CD-ROM User's Guide (this guide)

          To print a hardcopy listing (in ASCII or PostScript format)
          of one of these files, enter a command in one of the
          following formats:

          PRINT/QUEUE=queue-name device-name:[README]file-name.TXT

          PRINT/QUEUE=queue-name device-name:[README]file-name.PS

          For example:

          $ PRINT/QUEUE=VAX_ANSI DKA400:[README]CDMASTER_INDEX.TXT

          $ PRINT/QUEUE=VAX_POST DKA400:[README]USER_GUIDE.PS








    2-6 OpenVMS VAX Online Documentation Library

 










                                                                        3
        _________________________________________________________________

                               OpenVMS Alpha Online Documentation Library


              This chapter describes how to use the OpenVMS Alpha Online
              Documentation Library CD-ROMs.

        3.1 Required Environment

              To read online documentation, you must have the following
              environment:

              o  OpenVMS Alpha Version 1.5 or higher operating system.

              o  Bookreader software.

                 Bookreader is packaged with DECwindows Motif, which is
                 part of the OpenVMS Alpha operating system environment.

              o  A bitmap DECwindows display (a workstation or a personal
                 computer using PATHWORKS software).

              o  A CD-ROM reader.

                 Alpha hardware systems are shipped with a CD-ROM reader.

        3.2 Mounting and Controlling Access to a CD-ROM

              To access the files on an OpenVMS Alpha Software Product
              Library CD-ROM, mount the CD-ROM using the following
              procedure:

              1. Find the appropriate volume label on the face of the
                 CD-ROM.

              2. Load the CD-ROM into a protective caddy.

              3. Insert the caddy into the drive.

              4. Log in to the system manager's account (SYSTEM).

              5. Mount the CD-ROM by entering the MOUNT command in the
                 following format:

                 MOUNT device-name: volume-label

                           OpenVMS Alpha Online Documentation Library 3-1

 



    OpenVMS Alpha Online Documentation Library
    3.2 Mounting and Controlling Access to a CD-ROM


             For example:

             $ MOUNT DKA400: AXPDOCJAN941

    3.3 Enabling Access to Online Documentation

          Online documentation is made accessible either through
          individual product licenses, which must be registered and
          loaded, or through the use of the BOOKBROWSER.COM command
          procedure.

          If a software product is registered by means of a Product
          Authorization Key (PAK), you do not need to enable the
          online documentation; the product's online documentation is
          already accessible.

          If a software product is not registered (no PAK has
          been installed), execute BOOKBROWSER.COM as described in
          Section 3.3.1 to access the product's online documentation.

          Online documentation is provided as is and is not covered
          by other Digital warranties.

    3.3.1 Executing BOOKBROWSER.COM

          The BOOKBROWSER.COM command procedure registers the
          Bookbrowser PAK on your system and loads the appropriate
          information into your system's software license database.
          Executing BOOKBROWSER.COM provides you with access to all
          documents contained on this CD-ROM at no additional cost.

          To execute BOOKBROWSER.COM, complete the following
          procedure:

          1. Mount the CD-ROM containing the online documentation you
             want to read (see Section 3.2).

          2. Execute BOOKBROWSER.COM by entering a DCL command in the
             following format:

             @device-name:[DECW$BOOK]BOOKBROWSER.COM

             where:

             device-name is the name of the device on which you have
             mounted the CD-ROM.

             For example:

             $ @DKA400:[DECW$BOOK]BOOKBROWSER.COM

    3-2 OpenVMS Alpha Online Documentation Library

 



                               OpenVMS Alpha Online Documentation Library
                              3.3 Enabling Access to Online Documentation


        3.3.2 Providing Clusterwide Access to Online Documentation

              Once you have run BOOKBROWSER.COM, you can provide
              clusterwide access to the online documentation CD-ROMs
              in one of two ways:

              o  Reboot the cluster

              o  Invoke the OpenVMS System Management Utility (SYSMAN)

              Both methods load the Bookbrowser PAK into the clusterwide
              license database, but SYSMAN does this without requiring
              you to reboot the cluster.

              To load the Bookbrowser PAK into the clusterwide license
              database, complete the following procedure:

              1. Log in to the SYSTEM account.

              2. Enter the following commands:

                 $ RUN SYS$SYSTEM:SYSMAN
                 SYSMAN> SET ENVIRONMENT/CLUSTER
                 SYSMAN> DO LICENSE LOAD BOOKBROWSER
                 SYSMAN> EXIT

                 The Bookbrowser PAK is loaded into the clusterwide
                 license database.

        3.4 Reading Books on the CD-ROM

              This section describes how to read books on the OpenVMS
              Alpha Online Documentation Library CD-ROMs.

        3.4.1 Redefining DECW$BOOK

              During installation, the DECwindows software automatically
              creates a library directory for Bookreader on your system
              disk. The DECwindows software also defines the logical
              name DECW$BOOK to refer to this directory. When you invoke
              Bookreader, it reads the library file in the directory
              defined by DECW$BOOK.

              To read Bookreader files on the OpenVMS Alpha Online
              Documentation Library CD-ROMs, you must redefine the
              DECW$BOOK logical name to refer to the directory
              [DECW$BOOK] on the CD-ROMs.

                           OpenVMS Alpha Online Documentation Library 3-3

 



    OpenVMS Alpha Online Documentation Library
    3.4 Reading Books on the CD-ROM


          Use a command in the following format to redefine the
          DECW$BOOK logical name to refer to the [DECW$BOOK]
          directory on the CD-ROM:

          DEFINE/SYSTEM DECW$BOOK device-name:[DECW$BOOK]

          where:

          device-name is the name of the device where the Online
          Documentation Library CD-ROM is mounted.

          For example:

          $ DEFINE/SYSTEM DECW$BOOK DKA400:[DECW$BOOK]

    3.4.2 Defining DECW$BOOKSHELF

          You can also define the DECW$BOOKSHELF logical name to
          direct Bookreader to a file on the CD-ROM that contains
          another structured library.

          To define the DECW$BOOKSHELF logical name, use a command
          in one of the following formats. Substitute the name of
          the device where you have mounted the Online Documentation
          Library CD-ROM for device-name. Also, be sure the file name
          contains the semicolon (;) as shown.

          o  To display a library in which documentation is organized
             into categories:

DEFINE/SYSTEM DECW$BOOKSHELF device-name:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF;

             For example:

$ DEFINE/SYSTEM DECW$BOOKSHELF DKA400:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF;

          o  To display a library in which documentation is organized
             alphabetically:

DEFINE/SYSTEM DECW$BOOKSHELF device-name:[DECW$BOOK]DMASTER.DECW$BOOKSHELF;

             For example:

$ DEFINE/SYSTEM DECW$BOOKSHELF DKA400:[DECW$BOOK]DMASTER.DECW$BOOKSHELF;

          If you do not define DECW$BOOKSHELF, Bookreader displays
          the default library defined by DECW$BOOK.

    3-4 OpenVMS Alpha Online Documentation Library

 



                               OpenVMS Alpha Online Documentation Library
                                          3.4 Reading Books on the CD-ROM


        3.4.3 Accessing CD-ROMs Simultaneously

              To access books on multiple CD-ROMs, you must define
              DECW$BOOK to point to multiple devices and define
              DECW$BOOKSHELF to point to the library structure of
              your choice. Because all bookshelf files are on all
              CD-ROMs, you can define DECW$BOOKSHELF to point to the
              LIBRARY.DECW$BOOKSHELF on CD-ROM 1.

              To access books on multiple CD-ROMs:

              1. Define DECW$BOOK using a command in the following
                 format:

DEFINE/SYSTEM DECW$BOOK device-name1:[DECW$BOOK],device-name2:[DECW$BOOK],-
_device-name3:[DECW$BOOK]

                 For example:

$ DEFINE/SYSTEM DECW$BOOK DKA200:[DECW$BOOK],DKA300:[DECW$BOOK],-
_$ DKA400:[DECW$BOOK]

              2. Define DECW$BOOKSHELF, using a command in the following
                 format. Make sure the file name contains the semicolon
                 as shown.

DEFINE/SYSTEM DECW$BOOKSHELF device-name1:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF;

                 For example:

$ DEFINE/SYSTEM DECW$BOOKSHELF DKA400:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF;

              3. If you invoked Bookreader before you defined the logical
                 names, exit from Bookreader and invoke it again.

        3.4.4 Making a CD-ROM the Default Library

              To define a CD-ROM as the default library, add a command
              line defining DECW$BOOK to your startup command procedure
              located in SYS$MANAGER.

              Add a line in the following format:

              DEFINE/SYSTEM DECW$BOOK device-name:[DECW$BOOK]

              For example, the following command line establishes the
              CD-ROM mounted on DKA400 as the library from which books
              will be read each time you start up the system:

              $ DEFINE/SYSTEM DECW$BOOK DKA400:[DECW$BOOK]

                           OpenVMS Alpha Online Documentation Library 3-5

 



    OpenVMS Alpha Online Documentation Library
    3.4 Reading Books on the CD-ROM


    3.4.5 Running Bookreader

          To run Bookreader, choose Bookreader from the Applications
          menu on your Session Manager menu.

          If you are not familiar with Bookreader, see Section 1.2
          for some introductory instructions on its use.

    3.5 Printing a Listing of Products

          The following files are available in the [README] directory
          on the first CD-ROM:

          o  CDMASTER_INDEX.PS (.TXT)

             A printable version of the OpenVMS Alpha Online
             Documentation Library Master Index, which provides a
             listing of all the products in this release

          o  USER_GUIDE.PS (.TXT)

             A printable version of the Online Documentation Library
             CD-ROM User's Guide (this guide)

          To print a hardcopy listing (in ASCII or PostScript format)
          of either of these files, enter a command in one of the
          following formats:

          PRINT/QUEUE=queue-name device-name:[README]file-name.TXT

          PRINT/QUEUE=queue-name device-name:[README]file-name.PS

          For example:

          $ PRINT/QUEUE=VAX_ANSI DKA400:[README]CDMASTER_INDEX.TXT

          $ PRINT/QUEUE=AXP_POST DKA400:[README]USER_GUIDE.PS








    3-6 OpenVMS Alpha Online Documentation Library

 










                                                                        4
        _________________________________________________________________

                                Digital UNIX Online Documentation Library


              This chapter describes how to use the Digital UNIX Online
              Documentation Library CD-ROMs.

        4.1 Required Environment

              To read online documentation, you must have the following
              environment:

              o  Bookreader software.

                 Bookreader is packaged with DECwindows Motif, which is
                 part of the Digital UNIX operating system environment.

              o  A bitmap DECwindows display (a workstation, or a
                 personal computer using PATHWORKS software).

              o  A CD-ROM reader.

                 Alpha hardware systems are shipped with a CD-ROM reader.

        4.2 Mounting and Controlling Access to a CD-ROM

              To access the files on a Digital UNIX Software Product
              Library CD-ROM, mount the CD-ROM using the following
              procedure:

              1. Load the CD-ROM into a protective caddy.

              2. Insert the caddy into the drive.

              3. Log in as root or become superuser:

                 % su
                 Password:

              4. If you do not know the device name for the CD-ROM drive,
                 use the following command to find it.

                 # file /dev/rrz*c

                            Digital UNIX Online Documentation Library 4-1

 



    Digital UNIX Online Documentation Library
    4.2 Mounting and Controlling Access to a CD-ROM


             The file command returns output similar to that shown in
             the following example. Note that the entry for the disc
             drive includes the words RRD42 disk.

/dev/rrz1c:     character special (8/1740) SCSI #1 RRD42 disk #12 (SCSI ID #1)
/dev/rrz2c:     character special (8/2050) SCSI #0 RRD42 disk #16 (SCSI ID #2)
/dev/rrz3c:     character special (8/3074) SCSI #0 RZ25 disk #24 (SCSI ID #3)
/dev/rrz4c:     character special (8/4098) SCSI #0 RRD42 disk #32 (SCSI ID #4)
/dev/rrz8c:     character special (8/16386) SCSI #1 RZ56 disk #64 (SCSI ID #0)

          5. Create a directory that will be the mount point for the
             CD-ROM, using a command in the following format:

             mkdir /mount-point

             For example:

             # mkdir /cdrom

             If you are going to mount multiple CD-ROMs, create
             multiple mount points using the mkdir command.

          6. Mount the CD-ROM using the -dr or -r option to indicate
             that the CD-ROM is read-only.

             o  Use the -dr command if you are using a version of the
                operating system lower than Version 1.3.

             o  Use the -r option if your operating system is Version
                1.3 or higher.

             Use a command in the following format:

             mount -dr /dev/rzunit-numberc /mount-point

             where:

             unit-number is the unit number of your disc drive and

             mount-point is the mount point you have just created.

             In the following examples, /cdrom is the mount point for
             a single CD-ROM, while /cdrom-disc1 and /cdrom-disc2 are
             mount points for multiple CD-ROMs.

             o  For a single CD-ROM, use a command similar to the
                following:

                # mount -dr /dev/rz2c /cdrom

    4-2 Digital UNIX Online Documentation Library

 



                                Digital UNIX Online Documentation Library
                         4.2 Mounting and Controlling Access to a CD-ROM


                 o  For multiple CD-ROMs, use commands similar to the
                    following:

                    # mount -dr /dev/rz1c  /cdrom-disc1
                    # mount -dr /dev/rz2c  /cdrom-disc2

              7. To dismount a CD-ROM, use a command in one of the
                 following formats:

                 # umount /dev/rz4c

                 or

                 # /sbin/umount /dev/rz4c

              8. To ensure that a CD-ROM is remounted in the event that
                 your system crashes or is rebooted, follow these steps:

                 a. Using the text editor of your choice, open the file
                    /sbin/bcheckrc and search for the following section:

                    #
                    # mount local (non-nfs) filesystems
                    #
                    echo 'Mounting local filesystems'
                    /sbin/mount -a -v -t nonfs

                 b. To ensure that your CD-ROM will be mounted at system
                    startup, add the following lines after the mount
                    local section, replacing device_number with the
                    actual device number of your disc drive, and mount_point
                    with the directory on which you mounted the
                    CD-ROM.

                    #
                    # mount CD
                    #
                    echo 'Mounting CDROM'
                    /sbin/mount -dr /dev/rzdevice-numberc /mount-point

                    The system will mount the CD-ROM on the mount point
                    you specify on every reboot.



                            Digital UNIX Online Documentation Library 4-3

 



    Digital UNIX Online Documentation Library
    4.3 Enabling Access to Online Documentation


    4.3 Enabling Access to Online Documentation

          Online documentation is made accessible either through
          individual product licenses, which must be registered and
          loaded, or through the use of the bookbrowser shell script.

          If a software product is registered by means of a Product
          Authorization Key (PAK), you do not need to enable the
          online documentation; the product's online documentation is
          already accessible.

          If a software product is not registered (no PAK has been
          installed), run the the bookbrowser script described in
          Section 4.3.1 to access the product's online documentation.

          Online documentation is provided as is and is not covered
          by other Digital warranties.

    4.3.1 Registering Bookbrowser

          The bookbrowser shell script registers the BOOKBROWSER
          PAK on your system and loads the appropriate information
          into your system's software license database. Running
          bookbrowser provides you with access to all the documents
          on the CD-ROMs at no additional cost.

          To register and load the BOOKBROWSER PAK, complete the
          following procedure:

          1. Log in as root or become superuser.

          2. Mount the first CD-ROM, which contains bookbrowser (see
             Section 4.2).

          3. Run the bookbrowser script by entering a command in the
             following format:

             /mount-point/decw_book/bookbrowser

             where:

             mount-point is the directory where the CD-ROM is
             mounted.

             For example:

             # /cdrom/decw_book/bookbrowser

    4-4 Digital UNIX Online Documentation Library

 



                                Digital UNIX Online Documentation Library
                                         4.4 Reading Books on the CD-ROMs


        4.4 Reading Books on the CD-ROMs

              This section describes how to read books on the Digital
              UNIX Online Documentation Library CD-ROMs.

        4.4.1 Specifying Bookreader Libraries

              When you first run Bookreader, a Library window appears on
              your screen, displaying the top-level Bookreader library.
              This library is displayed by the environment variables
              DECW_BOOK and DECW_BOOKSHELF, which point to a default
              bookshelf.

              DECW_BOOK specifies the search path for book and bookshelf
              files. If DECW_BOOK is not set, Bookreader looks for book
              and bookshelf files in /usr/lib/dxbook.

              DECW_BOOKSHELF specifies the bookshelf file to be read by
              the Bookreader. If DECW_BOOKSHELF is not set, Bookreader
              looks for a bookshelf file named library.decw_bookshelf.

              These defaults are equivalent to issuing the following
              command:

              # dxbook /usr/lib/dxbook/decw_book/library.decw_bookshelf

              You can override these defaults in two ways:

              o  When you start Bookreader, you can specify the path
                 name and bookshelf file explicitly, using the bookshelf
                 argument on the command line.

                 To specify a library using the command line, enter
                 command in the following to format:

                 dxbook /mount-point/decw_book/shelf-name

                 where:

                 mount-point is the directory where the library is
                 mounted and

                 shelf-name is the name of the bookshelf.

                 For example, the following command tells Bookreader to
                 open the bookshelf newbooks.decw_bookshelf in the cdrom
                 directory:

                 # dxbook /cdrom/decw_book/newbooks.decw_bookshelf

                            Digital UNIX Online Documentation Library 4-5

 



    Digital UNIX Online Documentation Library
    4.4 Reading Books on the CD-ROMs


          o  The environment variables allow you to have Bookreader
             recognize additional books or bookshelf files by
             specifying more than one path name.

             For example, you can have the default bookshelf and
             books in /usr/lib/dxbook and another bookshelf with its
             books in /cdrom. You set DECW_BOOK to specify both path
             names. For example:

             # setenv DECW_BOOK "/usr/lib/dxbook /cdrom"

             The titles from both directories appear in the Library
             window when you run Bookreader.

    4.4.2 Accessing Bookreader Documentation from a Server

          To make the Bookreader documentation on the CD-ROM
          accessible from a server, you must export the Bookreader
          files to a workstation running DEC OSF/1 Version 1.3 or
          higher.

          The following steps assume that the server is set up to
          export files using Network File System (NFS). For further
          information, refer to the nfssetup reference page of the
          Digital UNIX manual, Network Configuration.

          To export the Bookreader files to a workstation, follow
          these steps.

          On the server system:

          1. Log in as root or become superuser.

          2. Ensure that the CD-ROM is mounted (see Section 4.2).
             This example assumes that the server system has mounted
             the CD-ROM on the directory /cdrom.

          3. Using the text editor of your choice, place an entry in
             the /etc/exports file for the /cdrom directory and make
             sure that you specify the -ro option for a read-only
             export, as follows:

             /cdrom -ro

          On the client system:

          1. Log in as root or become superuser.

          2. Run nfssetup and import the /cdrom directory from the
             server as a read-only file system.

    4-6 Digital UNIX Online Documentation Library

 



                                Digital UNIX Online Documentation Library
                                         4.4 Reading Books on the CD-ROMs


              3. When nfssetup is done, mount the /cdrom directory by
                 entering the following command:

                 # mount /cdrom

        4.4.3 Running Bookreader

              To run Bookreader, do one of the following:

              o  Choose Bookreader from the Applications menu on your
                 Session Manager menu.

              o  Enter the following command from the shell prompt:

                 # dxbook &

              If you are not familiar with Bookreader, see Section 1.2
              for introductory instructions on its use.

        4.5 Printing a Listing of Products

              The following files are available in the /readme directory
              on the first CD-ROM:

              o  cdmaster_index.ps (.txt)

                 A printable version of the Digital UNIX Online
                 Documentation Library Master Index, which provides a
                 listing of all the products in this release

              o  user_guide.ps (.txt)

                 A printable version of the Online Documentation Library
                 CD-ROM User's Guide (this guide)

              To print a hardcopy listing (in ASCII or PostScript format)
              of either of these files, enter a command in one of the
              following formats:

              lpr -Pqueue-name /mount-point/readme/file-name.txt

              lpr -Pqueue-name /mount-point/readme/file-name.ps

              For example:

              % lpr -Punix_ansi /cdrom/readme/cdmaster_index.txt

              % lpr -Punix_post /cdrom/readme/user_guide.ps

                            Digital UNIX Online Documentation Library 4-7

 










                                                                        5
        _________________________________________________________________

                                      ULTRIX Online Documentation Library


              This chapter describes how to use the ULTRIX Online
              Documentation Library CD-ROMs.

        5.1 Required Environment

              To read online documentation, you must have the following
              environment:

              o  Bookreader software.

                 Bookreader is packaged with DECwindows on ULTRIX, which
                 is installed as part of ULTRIX Workstation Software
                 (UWS).

              o  A workstation with a VAX family or RISC-based processor
                 and bitmap display.

                 You can use a standalone workstation or a workstation
                 being served from a file server.

              o  A CD-ROM reader.

        5.2 Mounting and Controlling Access to a CD-ROM

              To access the files on an ULTRIX Software Product Library
              CD-ROM, mount the CD-ROM using the following procedure:

              1. Load the CD-ROM into a protective caddy.

              2. Insert the caddy into the drive.

              3. Log in as root or become superuser:

                 % su
                 Password:

              4. If you do not know the device name for the disc drive,
                 use the following command to find it:

                 # file /dev/rrz*c

                                  ULTRIX Online Documentation Library 5-1

 



    ULTRIX Online Documentation Library
    5.2 Mounting and Controlling Access to a CD-ROM


             The file command returns output similar to that shown in
             the following example. Note that the entry for the disc
             drive includes the words RRD42 disk.

/dev/rrz1c: character special (8/1740) SCSI #1 RRD42 disk #12 (SCSI ID #1)
/dev/rrz2c: character special (8/2050) SCSI #0 RRD42 disk #16 (SCSI ID #2)
/dev/rrz3c: character special (8/3074) SCSI #0 RZ25 disk #24 (SCSI ID #3)
/dev/rrz4c: character special (8/4098) SCSI #0 RRD42 disk #32 (SCSI ID #4)
/dev/rrz8c: character special (8/16386) SCSI #1 RZ56 disk #64 (SCSI ID #0)

          5. Create a directory that will be the mount point for the
             CD-ROM, using a command in the following format:

             mkdir /mount-point

             For example:

             # mkdir /cdrom

             If you are going to mount multiple CD-ROMs, create
             multiple mount points using the mkdir command.

          6. Mount the CD-ROM using the -r option to indicate that
             the CD-ROM is read-only; use a command in the following
             format:

             mount -r /dev/rzunit-numberc /mount-point

             where:

             unit-number is the unit number of your disc drive and

             mount-point is the mount point you have just created.

             In the following examples, /cdrom is the mount point for
             a single CD-ROM, while /cdrom-disc1 and /cdrom-disc2 are
             mount points for multiple CD-ROMs.

             o  For a single CD-ROM, use a command similar to the
                following:

                # mount -r /dev/rz2c /cdrom

             o  For multiple CD-ROMs, use commands similar to the
                following:

                # mount -r /dev/rz1c  /cdrom-disc1
                # mount -r /dev/rz2c  /cdrom-disc2

    5-2 ULTRIX Online Documentation Library

 



                                      ULTRIX Online Documentation Library
                          5.2 Mounting and Controlling Access to a CD-ROM


              7. To dismount a CD-ROM, use a command similar to one of
                 the following:

                 # umount /cdrom

                 or

                 # /etc/umount /dev/rz4c

              8. To ensure that the CD-ROM is remounted if your system
                 crashes or is rebooted, open the /etc/fstab file. Using
                 the text editor of your choice, add a line to this file
                 containing the following information. See the file 
                 /usr/include/fstab.h for a description of each field.

                 spec:file:type:freq:passno:name:opts

                 For example:

                 /dev/rz4c:/cdrom:ro:0:0:ufs::

                 The system will now mount the CD-ROM on /cdrom on every
                 reboot.

        5.3 Enabling Access to Online Documentation

              Online documentation is made accessible either through
              individual product licenses, which must be registered and
              loaded, or through the use of the bookbrowser shell script.

              If a software product is registered by means of a Product
              Authorization Key (PAK), you do not need to enable the
              online documentation; the product's online documentation is
              already accessible.

              If a software product is not registered (no PAK has been
              installed), run the the bookbrowser script described in
              Section 5.3.1 to access the product's online documentation.

              Online documentation is provided as is and is not covered
              by other Digital warranties.




                                  ULTRIX Online Documentation Library 5-3

 



    ULTRIX Online Documentation Library
    5.3 Enabling Access to Online Documentation


    5.3.1 Registering Bookbrowser

          The bookbrowser shell script registers the BOOKBROWSER
          PAK on your system and loads the appropriate information
          into your system's software license database. Running
          bookbrowser provides you with access to all the documents
          on the CD-ROMs at no additional cost.

          To register and load the BOOKBROWSER PAK, complete the
          following procedure:

          1. Log in as root or become superuser.

          2. Mount the first CD-ROM (which contains bookbrowser) (see
             Section 5.2).

          3. Run the bookbrowser script by entering a command in the
             following format:

             /mount-point/decw_book/bookbrowser

             where:

             mount-point is the directory where the CD-ROM is
             mounted.

             For example:

             # /cdrom/decw_book/bookbrowser

    5.4 Reading Books on the CD-ROMs

          This section describes how to read books on the ULTRIX
          Online Documentation Library CD-ROMs.

    5.4.1 Specifying Bookreader Libraries

          When you first run Bookreader, a Library window appears on
          your screen, displaying the top-level Bookreader library.
          This library is displayed by the environment variables
          DECW_BOOK and DECW_BOOKSHELF, which point to a default
          bookshelf.

          DECW_BOOK specifies the search path for book and bookshelf
          files. If DECW_BOOK is not set, Bookreader looks for book
          and bookshelf files in /usr/lib/dxbook.

          DECW_BOOKSHELF specifies the bookshelf file to be read by
          the Bookreader. If DECW_BOOKSHELF is not set, Bookreader
          looks for a bookshelf file named library.decw_bookshelf.

    5-4 ULTRIX Online Documentation Library

 



                                      ULTRIX Online Documentation Library
                                         5.4 Reading Books on the CD-ROMs


              These defaults are equivalent to issuing the following
              command:

              # dxbook /usr/lib/dxbook/decw_book/library.decw_bookshelf

              You can override these defaults in two ways:

              o  When you start Bookreader, you can specify the path
                 name and bookshelf file explicitly, using the bookshelf
                 argument on the command line. To specify a library using
                 the command line, enter command in the following to
                 format:

                 dxbook /mount-point/decw_book/shelf-name

                 where:

                 mount-point is the directory where the library is
                 mounted and

                 shelf-name is the name of the bookshelf.

                 For example, the following command tells Bookreader to
                 open the bookshelf newbooks.decw_bookshelf in the cdrom
                 directory:

                 # dxbook /cdrom/decw_book/newbooks.decw_bookshelf

              o  The environment variables allow you to have Bookreader
                 recognize additional books or bookshelf files by
                 specifying more than one path name.

                 For example, you can have the default bookshelf and
                 books in /usr/lib/dxbook and another bookshelf with its
                 books in /cdrom. You set DECW_BOOK to specify both path
                 names.

                 -  If you are using the C shell, place a command in the
                    following format in .login or .cshrc:

        setenv DECW_BOOK "/mount-point1/decw_book mount-point2/decw_book"

                    For example:

        setenv DECW_BOOK "/usr/lib/dxbook/decw_book /cdrom/decw_book"

                 -  If you are using the Bourne shell or System V shell,
                    place commands in the following format in .profile:

                    DECW_BOOK="/mount-point1/decw_book mount-point2/decw_book"
                    export DECW_BOOK

                                  ULTRIX Online Documentation Library 5-5

 



    ULTRIX Online Documentation Library
    5.4 Reading Books on the CD-ROMs


                For example:

                DECW_BOOK="/usr/lib/dxbook/decw_book /cdrom/decw_book"
                export DECW_BOOK

             The titles from both directories appear in the Library
             window when you run Bookreader.

    5.4.2 Accessing Bookreader Documentation from a Server

          To make the Bookreader documentation on the CD-ROM
          accessible from a server, you must export the Bookreader
          files to a workstation running either ULTRIX Version 4.2
          (or higher) or DEC OSF/1 Version 1.3 or higher.

          The following steps assume that the server is set up to
          export files using Network File System (NFS). For further
          information, refer to the nfssetup(8) reference page of the
          Digital UNIX manual, Network Configuration.

          To export the Bookreader files to a workstation, follow
          these steps.

          On the server system:

          1. Log in as root or become superuser.

          2. Ensure that the CD-ROM is mounted (see Section 5.2).
             This example assumes that the server system has mounted
             the CD-ROM on the directory /cdrom.

          3. Using the text editor of your choice, place an entry in
             the /etc/exports file for the /cdrom directory and make
             sure that you specify the -ro option for a read-only
             export, as follows:

             /cdrom -ro

          On the client system:

          1. Log in as root or become superuser.

          2. Run nfssetup and import the /cdrom directory from the
             server as a read-only file system.

          3. When nfssetup is done, mount the /cdrom directory by
             entering the following command:

             # mount /cdrom

    5-6 ULTRIX Online Documentation Library

 



                                      ULTRIX Online Documentation Library
                                         5.4 Reading Books on the CD-ROMs


        5.4.3 Running Bookreader

              To run Bookreader, do one of the following:

              o  Choose Bookreader from the Applications menu on your
                 Session Manager menu.

              o  Enter the following command from the shell prompt:

                 # dxbook &

              If you are not familiar with Bookreader, see Section 1.2
              for introductory instructions on its use.

        5.5 Printing a Listing of Products

              The following files are available in the /readme directory
              on the first CD-ROM:

              o  cdmaster_index.ps (.txt)

                 A printable version of the ULTRIX Online Documentation
                 Library Master Index, which provides a listing of all
                 the products in this release

              o  user_guide.ps (.txt)

                 A printable version of the Online Documentation Library
                 CD-ROM User's Guide (this guide)

              To print a hardcopy listing (in ASCII or PostScript format)
              of either of these files, enter a command in one of the
              following formats:

              lpr -Pqueue-name /mount-point/readme/file-name.txt

              lpr -Pqueue-name /mount-point/readme/file-name.ps

              For example:

              % lpr -Pult_ansi /cdrom/readme/cdmaster_index.txt

              % lpr -Pult_post /cdrom/readme/user_guide.ps


                                  ULTRIX Online Documentation Library 5-7

 














     _________________________________________________________________

                                                                 Index



     A______________________________   C______________________________

     Access                            CD-ROMs
       clusterwide                       controlling access
          on OpenVMS Alpha, 3-3             on Digital UNIX,  4-1
          on OpenVMS VAX, 2-3               on OpenVMS Alpha,  3-1
       enabling                             on OpenVMS VAX,  2-1
          on Digital UNIX, 4-4              on ULTRIX,  5-1
          on OpenVMS Alpha, 3-2          handling,  1-1
          on OpenVMS VAX, 2-2            mounting
          on ULTRIX, 5-3                    on Digital UNIX,  4-1
       simultaneous                         on OpenVMS Alpha,  3-1
          on OpenVMS Alpha, 3-5             on OpenVMS VAX,  2-1
          on OpenVMS VAX, 2-5               on ULTRIX,  5-1

     B                                 CDs
     _______________________________     See CD-ROMs
     Bookbrowser PAK                   Compact discs
       registering                       See CD-ROMs
          on OpenVMS Alpha, 3-2
          on OpenVMS VAX, 2-2          D
     bookbrowser shell script          _______________________________
       registering                     DECW$BOOK
          on Digital UNIX, 4-4           redefining
          on ULTRIX, 5-4                    on OpenVMS Alpha,  3-3
     BOOKBROWSER.COM                        on OpenVMS VAX,  2-3
       on OpenVMS Alpha, 3-2           DECW$BOOKSHELF
       on OpenVMS VAX, 2-2               redefining
     Bookreader                             on OpenVMS Alpha,  3-4
       libraries                            on OpenVMS VAX,  2-4
          on Digital UNIX, 4-5         DECW_BOOK
          on OpenVMS Alpha, 3-3          redefining
          on ULTRIX, 5-4                    on Digital UNIX,  4-5
          OpenVMS VAX, 2-3                  on ULTRIX,  5-5
       using, 1-2

                                                               Index-1

 







    DECW_BOOKSHELF                     Mounting CD-ROMs
      redefining                        on Digital UNIX,  4-1
         on Digital UNIX,  4-5          on OpenVMS Alpha,  3-1
         on ULTRIX,  5-5                on OpenVMS VAX,  2-1
    Documentation                       on ULTRIX,  5-1
      ordering,  vi                    MUPs
                                        ordering,  vi

    E______________________________
    ECOs                               O______________________________

      ordering,  vi                    Ordering
    Engineering Change Orders           documentation,  vi
      See ECOs                          ECOs and MUPs,  vi
                                        products,  vi

    H______________________________    P
    Hardware required                  _______________________________
      on Digital UNIX,  4-1            Printing
      on OpenVMS Alpha,  3-1            Digital UNIX Master Index,
      on OpenVMS VAX,  2-1                 4-7
      on ULTRIX,  5-1                   OpenVMS Alpha Master Index,
                                           3-6
    I______________________________     OpenVMS VAX Master Index,
    Internet account                       2-6
      for providing feedback,  vi       ULTRIX Master Index,  5-7

    L                                  S______________________________
    _______________________________    Software required
    Library                             on Digital UNIX,  4-1
      default                           on OpenVMS Alpha,  3-1
         on Digital UNIX,  4-5          on OpenVMS VAX,  2-1
         on OpenVMS Alpha,  3-3,        on ULTRIX,  5-1
            3-5                        SYSMAN utility
         on OpenVMS VAX,  2-3, 2-5      on OpenVMS Alpha,  3-3
         on ULTRIX,  5-4                on OpenVMS VAX,  2-3

    M______________________________    V______________________________

    Mandatory updates                  VAXcluster

      See MUPs                          online documentation access,
    Master index                           2-3, 3-3
      on Digital UNIX,  4-7
      on OpenVMS Alpha,  3-6
      on OpenVMS VAX,  2-6
      on ULTRIX,  5-7

    Index-2
