 







                                                              AA-MH42B-TE









             DECwrite_____________________________________________
             Installation Guide for VMS Systems




             This guide describes how to install Version 1.1 of DECwrite
             on a VMS system.










             Operating System:             VMS Version 5.3-1 or higher

             Software Version:             DECwrite Version 1.1




             digital equipment corporation
             maynard, massachusetts

 





             _____________________________________________________
             August 1990

             The information in this document is subject to change without
             notice and should not be construed as a commitment by Digital
             Equipment Corporation. Digital Equipment Corporation assumes
             no responsibility for any errors that may appear in this
             document.

             The software described in this document is furnished under a
             license and may be used or copied only in accordance with the
             terms of such license.

             No responsibility is assumed for the use or reliability
             of software on equipment that is not supplied by Digital
             Equipment Corporation or its affiliated companies.

             Restricted Rights: Use, duplication, or disclosure by the
             U.S. Government is subject to restrictions as set forth in
             subparagraph (c)(1)(ii)  of the Rights in Technical Data and
             Computer Software clause at DFARS 252.227-7013.

             © Digital Equipment Corporation 1990.

             All Rights Reserved.
             Printed in U.S.A.

             The postpaid Reader's Comments forms at the end of this
             document request your critical evaluation to assist in
             preparing future documentation.

             The following are trademarks of Digital Equipment Corporation:
             CDA, DDIF, DECchart, DECdecision, DECnet, DECpage, DECwindows,
             DECwrite, DIGITAL, DTIF, LiveLink, PrintServer 40, ScriptPrinter,
             ULTRIX-32, ULTRIX Worksystem Software, VAX, VAXcluster, VAX
             RMS, VAXstation, VMS, WPS-PLUS, and the Digital logo

             The following are third-party trademarks:

             Helvetica and Times are registered trademarks of Linotype
             Company.

             IBM is a registered trademark of International Business
             Machines Corporation.

             ITC Avant Garde Gothic, ITC Souvenir, and ITC Lubalin
             Graph are registered trademarks of International Typeface
             Corporation.

             Microsoft and Word are registered trademarks of Microsoft
             Corporation.

             PostScript is a registered trademark and Display PostScript
             is a trademark of Adobe Systems, Inc.

             Usage Alert, Electronic Thesaurus, International Hyphenators,
             and International CorrectSpell licensed from Houghton
             Mifflin Company. Copyright© 1985, 1987, 1988 by Houghton
             Mifflin. German© 1985, 1987 by Langenscheidt K.G. French in
             cooperation with Librairie Larousse. Italian© 1988 by Nicola
             Zanichelli. All rights reserved. U.S. Pat. Nos. 4,580,241,
             4,724,523 and 4,771,401. Canadian Pat. No. 1,203,916.
             Thesaurus U.S. Pat. No. 4,724,523. English based upon THE
             AMERICAN HERITAGE DICTIONARY. Thesaurus based upon ROGET'S II
             THESAURUS. Reproduction or disassembly of embodied computer
             programs or algorithms prohibited.

             WordPerfect is a registered trademark of WordPerfect
             Corporation.

                                                                    ZK5505
             This document was prepared using VAX DOCUMENT, Version 1.2.

 















          ________________________________________________________________


                                                                  Contents




          Preface..................................................    vii


          1  Introduction to DECwrite for VMS Systems

              1.1  Online Help.....................................    1-1
              1.2  The DECwrite Editor.............................    1-1
              1.3  DECwrite Optional Lexicons......................    1-2


          2  Preparing for DECwrite Installation on a VMS System

              2.1  DECwrite Distribution Kit.......................    2-1
              2.2  Prerequisite Software...........................    2-2
              2.3  Prerequisite Hardware...........................    2-4
              2.4  Privileged Account..............................    2-4
              2.5  License Registration............................    2-4
              2.6  International Lexicons..........................    2-5
              2.7  VAXcluster Considerations.......................    2-5
              2.8  System Quotas...................................    2-6
              2.8.1  Disk Space Requirements ......................    2-6



                                                                       iii

 






              2.8.2  System Parameter Values ......................    2-7
              2.8.2.1   Checking Parameter Values..................    2-7
              2.8.2.2   Calculating GBLPAGES and GBLSECTIONS
                        Parameter Values...........................    2-8
              2.8.2.3   Changing Parameter Values with AUTOGEN.....    2-8
              2.9  System Disk Backup..............................    2-9


          3  Installing DECwrite

              3.1  VMSINSTAL Requirements..........................    3-2
              3.2  VMSINSTAL Procedure.............................    3-2


          4  DECwrite Postinstallation Procedures

              4.1  Editing Startup Files...........................    4-1
              4.1.1  Editing SYSTARTUP_V5.COM .....................    4-1
              4.1.2  Editing WRITE$STARTUP.COM ....................    4-4
              4.2  Installing DECwrite on a Standalone System......    4-4
              4.3  Installing DECwrite on a VAXcluster.............    4-5
              4.4  Rebooting the System............................    4-6
              4.5  User Account Requirements.......................    4-6
              4.5.1  Privileges ...................................    4-6
              4.5.2  User Account Quotas ..........................    4-6
              4.6  Tuning Your System..............................    4-8
              4.7  Selecting a Language............................    4-8
              4.8  Installation Verification Procedures............    4-8
              4.9  Running DECwrite from FileView..................    4-9
              4.10 Running DECwrite from DCL.......................    4-9
              4.11 DECwrite Sample Document........................    4-9
              4.12 Determining and Reporting Problems..............   4-10








          iv

 






          5  Using the DECwrite Font Utility

              5.1  Preparing to Run the Font Utility...............    5-1
              5.2  Starting the Font Utility ......................    5-2
              5.3  Font Utility Commands and Descriptions..........    5-2


          A  Printouts from Sample DECwrite Installations

              A.1  Full DECwrite Installation......................    A-1
              A.2  Font Only DECwrite Installation.................    A-7


          B  DECwrite Files


          Index


          Figures

              3-1  Successful Installation Display.................   3-15

          Tables

              2-1  Free Disk Blocks Required to Install DECwrite...    2-6

              2-2  Minimum Required Global Pages and Sections......    2-7

              3-1  DECwrite Kit Names..............................    3-3

              4-1  Language Parameters.............................    4-3

              4-2  International Spell Lexicons....................    4-5

              4-3  User Account Quotas.............................    4-7

              5-1  DECwrite Font Utility Messages..................    5-2

              B-1  DECwrite Files..................................    B-1

              B-2  DECchart Files..................................   B-24

                                                                         v

 














          ________________________________________________________________


                                                                   Preface




          About This Guide

             DECwrite is a document processing application that lets
             you create and format documents that contain both text and
             graphics. In addition, you can include data from supported
             cooperating applications into your DECwrite documents.

          Purpose of This Guide

             This guide describes how to install DECwrite on the VMS
             operating system. You should review the entire guide before
             you start the installation.

          Who Should Use This Guide

             This guide is for VMS system managers or others responsible
             for installing system software. To install DECwrite software,
             you must have access to a privileged account such as the
             SYSTEM account, and you must be familiar with the VMS
             installation procedure (VMSINSTAL).




                                                                       vii

 






          Structure of This Guide

             This guide has five chapters and two appendixes. Chapter 1
             is a general introduction. Chapter 2 describes installation
             prerequisites and suggestions. Chapter 3 is the installation
             procedure. Chapter 4 describes postinstallation procedures
             and general usage information. Chapter 5 describes the
             DECwrite Font Utility that allows you to add, manage, and
             delete new fonts. Appendix A shows two sample installation
             procedures for reference purposes. Appendix B lists the files
             that DECwrite installs or modifies on your system.

          For More Information

             For more information about the DECwrite document processing
             application, see the following:

              _ DECwrite Documentation Supplement-a description of the new

                features supplied by DECwrite Version 1.1, and a list of
                corrections to the DECwrite Version 1.0 documentation

              _ DECwrite Demonstration Document-an online introduction to

                selected DECwrite concepts and operations

                To use the Demonstration Document, choose Edit Demo
                Document from the Help menu once you have started
                DECwrite.

              _ DECwrite Getting Started-a short tutorial about basic

                DECwrite operations

              _ DECwrite User's Guide-a description of DECwrite tasks

              _ DECwrite Reference Manual-a description of DECwrite

                concepts and operations

              _ DECwrite Sample Documents-printed copies of the style

                files provided with the DECwrite document processing
                application

              _ DECwrite Quick Lookup-a summary of basic DECwrite

                operations, menu items, and keyboard equivalents

          viii

 






              _ DECchart Getting Started-a short tutorial about basic

                DECchart operations

              _ DECchart User's Guide-a description of DECchart tasks

              _ Using the DECwrite CDA Converters-a description of the

                table and document converters packaged with DECwrite

             For more information about the VMSINSTAL command procedure,
             see one of the following books:

              _ VMS System Manager's Manual (VMS Version 5.3 base

                documentation set)

              _ Guide to Setting Up a VMS System (VMS Version 5.3 full

                documentation set)

             For more information about DECwindows, see the following:

              _ VMS DECwindows User's Guide

              _ VMS DECwindows Desktop Applications Guide

             For more information about the CDA converters, see the
             following:

              _ Using the CDA Converters-a description of the table

                and document converters packaged with DECwrite, plus a
                description of other available CDA converters

              _ Technical Guide to the CDA Converters-a description of

                the CDA Converters and the CDA Viewer, which support the
                Digital architecture for compound documents (available
                only on CDROM)

                                                                        ix

 






          Conventions

             The following conventions are used in this guide:

          mouse                 The term mouse is used to refer to any
                                pointing device, such as a mouse, a puck,
                                or a stylus.

          MB1, MB2, MB3         MB1 indicates the left mouse button, MB2
                                indicates the middle mouse button, and
                                MB3 indicates the right mouse button. (The
                                buttons can be redefined by the user.)

          < Alt >               The < Alt > key is labeled as the
                                < Compose Character > key on some
                                keyboards.

          <Ctrl/x>              A sequence such as <Ctrl/x> indicates that
                                you must hold down the key labeled Ctrl
                                while you press another key or a pointing
                                device button.

          <PF1> < x >           A sequence such as <PF1> < x > indicates
                                that you must first press and release the
                                key labeled PF1, then press and release
                                another key or a pointing device button.

          <Return>              A key name is shown enclosed to indicate
                                that you press a key on the keyboard.

          blue-green ink        Blue-green ink indicates information that
                                you must enter from the keyboard or a
                                screen object that you must choose or
                                click on. For online versions, user input
                                is shown in bold.





          x

 







          UPPERCASE TEXT        Uppercase letters indicate that you must
                                enter a command (for example, enter OPEN
                                /READ) or indicate the name of a routine,
                                the name of a file, the name of a file
                                protection code, or the abbreviation for a
                                system privilege.

          DECchart              The term DECchart refers to the DECchart[TM]
                                software.

          DECdecision           The term DECdecision refers to the
                                DECdecision[TM] software.

          DECpage               The term DECpage refers to the DECpage[TM]
                                software.

          DECwrite              The term DECwrite refers to the DECwrite[TM]
                                software.

          WPS-PLUS              The term WPS-PLUS refers to the WPS-
                                PLUS[TM] software.


















                                                                        xi

 

















                                                                              1
               ________________________________________________________________

                                       Introduction to DECwrite for VMS Systems




                  DECwrite is a compound document processing application that
                  allows VMS users to create and format documents that contain
                  text, graphics, images, and application data. DECwrite is
                  compliant with the Compound Document Architecture (CDA).

                  Included with DECwrite is DECchart, a data-driven charting
                  application, and the DECwrite Equation Editor.

               1.1  Online Help

                  DECwrite features help on all menu items, and context-
                  sensitive help on many functions. The help provides detailed
                  information about how to use DECwrite features and allows
                  users to become proficient in creating DECwrite documents.

               1.2  The DECwrite Editor

                  DECwrite includes a full word processing editor with
                  functions such as select, cut, copy, paste, undo, redo,
                  and navigation. DECwrite features sophisticated search
                  and replace capabililites, including the ability to search
                  for returns, special characters, and arbitrary white space.
                  Advanced editing features such as redlining and change bars
                  make DECwrite an appropriate application for documentation
                  and publication groups.









                                  Introduction to DECwrite for VMS Systems  1-1

 











                  DECwrite also provides emulators for the more popular text
                  editors. Among them are the Digital WPS-PLUS, EDT, and EVE
                  editors, as well as Emacs, Microsoft Word, and WordPerfect.

                  DECwrite includes Houghton Mifflin's high-quality hyphenation
                  routines and an American English spell check lexicon based
                  on the American Heritage Dictionary (U.S. version only).
                  DECwrite allows the user to create exception dictionaries
                  for words that would not commonly appear in a standard
                  dictionary. Exception dictionaries can be shared within a
                  DECwrite workgroup. Hyphenation can be controlled locally
                  with discretionary hyphens. See Section 1.3 for a list of the
                  optional lexicons.

                  DECwrite supports multiple language hyphenation,which allows
                  you to switch from one language to another within a document.

               1.3  DECwrite Optional Lexicons

                  The optional lexicons allow DECwrite to use spell checking in
                  multiple languages. The optional supported DECwrite lexicons
                  are:

                   _ American Business

                   _ American Medical

                   _ Dutch

                   _ English (American and British)

                   _ French

                   _ German

                   _ Norwegian

                   _ Spanish

                   _ Swedish








               1-2  Introduction to DECwrite for VMS Systems

 

















                                                                              2
               ________________________________________________________________

                            Preparing for DECwrite Installation on a VMS System




                  This chapter describes tasks that you must perform when
                  installing DECwrite, and suggests the best methods for
                  preparing for installation.

                  Installing DECwrite is similar to installing other VMS
                  layered products. You should:

                   1 Take an inventory of the software distribution kit.

                   2 Make sure that your system has the prerequisite software
                     and hardware.

                   3 Register your DECwrite license according to the VMS
                     License Registration section in this chapter.

                   4 Prepare your system and its users for installation.

                   5 Print and read the Release Notes.

                   6 Perform the installation procedure and any necessary
                     postinstallation procedures.

                   7 Resume normal operations after you complete the installa-
                     tion.

                  You should allow approximately 50 minutes for the installa-
                  tion and 6 minutes to run the IVP.

               2.1  DECwrite Distribution Kit

                  Each DECwrite distribution kit contains:

                   _ A bill of materials (BOM) and indented bills report (BIL)

                   _ The distribution medium for the DECwrite software

                       Preparing for DECwrite Installation on a VMS System  2-1

 











                   _ Documentation for the product

                     Media Only kits include the installation guide only.

                   _ The Product Authorization Key (PAK)

                  To ensure that you have a complete kit, check the kit
                  contents against the bill of materials and the indented bills
                  report.

                  Check also that you received the correct distribution medium,
                  labeled as DECwrite V1.1.

                  If your kit is damaged or if you find that parts of it are
                  missing, contact your Digital representative.

               2.2  Prerequisite Software

                  To install DECwrite you must have:

                   _ A valid VMS operating system configuration running VMS

                     Version 5.3-1 or higher, having the VMS Required saveset

                   _ DECwindows installed

                     To execute the IVP during the installation, DECwindows
                     should also be running.

                  Since DECwrite is a DECwindows application, it can run in
                  either of the following ways:

                   _ Standalone execution - running the DECwindows X11 display

                     server and the client application (DECwrite) on the same
                     machine

                   _ Remote execution - running the DECwindows X11 display

                     server and the client application (DECwrite) on different
                     machines

                     This requires that a valid DECwindows transport mechanism
                     also be installed. For example, these include DECnet, TCP
                     /IP, and LAT.

                  For standalone execution, the following DECwindows components
                  must be installed on the machine:

                   _ VMS DECwindows Compute Server (base kit, which includes

                     runtime support)

                   _ VMS DECwindows Device Support

               2-2  Preparing for DECwrite Installation on a VMS System

 











                     For remote execution in a noncluster VAX environment, the
                     following DECwindows components must be installed.














































                       Preparing for DECwrite Installation on a VMS System  2-3

 











                     On the workstation:

                   _ VMS DECwindows Compute Server (base kit, which includes

                     runtime support)

                   _ VMS DECwindows Device Support

                     On the remote machine:

                   _ VMS DECwindows Compute Server (base kit, which includes

                     runtime support)

                   _ VMS DECwindows Device Support (optional)

                     Refer to the VMS Version 5.3-1 Installation Guide for
                     details.

               2.3  Prerequisite Hardware

                  DECwrite supports all hardware configurations supported
                  by a VMS Version 5.3-1 system running DECwindows, with
                  a minimum of 8 MB of memory. See the DECwrite Software
                  Product Description (SPD) for details on supported hardware
                  configurations.

               2.4  Privileged Account

                  To install DECwrite, you must be logged into the system
                  manager's account (SYSTEM), an account that has SETPRV, or an
                  account with at least the following privileges:

                   _ CMKRNL

                   _ WORLD

                   _ SYSPRV

                  Note that the VMSINSTAL procedure turns off BYPASS privilege
                  at the start of the installation.

               2.5  License Registration

                  The DECwrite PAK should be registered and loaded before you
                  install or use DECwrite. The information you need is in the
                  Product Authorization Key (PAK) shipped with DECwrite. The
                  PAK is a paper certificate that contains data about your
                  license.

               2-4  Preparing for DECwrite Installation on a VMS System

 











                  If you do not register and load the license before installing
                  DECwrite, the installation will complete but the Installation
                  Verification Procedure (IVP) will not be run. You can execute
                  the IVP manually after the installation, following the
                  instructions in Chapter 3.

                  To register the license, first log in to a privileged account
                  such as the system manager's account, SYSTEM. Then choose one
                  of the following procedures to perform the registration. The
                  second method is faster for experienced users.

                   _ Invoke the SYS$UPDATE:VMSLICENSE.COM procedure. When

                     prompted for information, respond with data from your
                     Product Authorization Key (PAK).

                        OR

                   _ Issue the DCL commands LICENSE REGISTER and LICENSE

                     LOAD with the appropriate qualifiers that correspond to
                     information on the PAK.

                  For additional information, see the License Management
                  Facility section in your VMS Version 5.3-1 documentation
                  set.

               2.6  International Lexicons

                  If you have previously installed any of the International
                  Lexicon kits or are reinstalling DECwrite, make sure you have
                  executed the SYS$STARTUP:LCI$STARTUP.COM procedure before
                  starting the installation. This startup procedure defines the
                  logical LCI$LEXICONS that the installation procedure checks
                  to place lexicon files in their proper directories.

               2.7  VAXcluster Considerations

                  You can install DECwrite on a VAXcluster.

                  In a VAXcluster with a common system disk, you can execute
                  the installation procedure on a single member of the cluster.
                  After the installation is completed, each VAX processor can
                  share the same DECwrite software.

                  You must check the number of global sections and global pages
                  on each node in the VAXcluster where you plan to install
                  DECwrite. Instructions are in the next section.

                  See Chapter 4 for details about VAXcluster postinstallation
                  instructions.

                       Preparing for DECwrite Installation on a VMS System  2-5

 











               2.8  System Quotas

                  You use the VMSINSTAL command procedure to install DECwrite.
                  For VMSINSTAL to run properly, there must be sufficient
                  disk storage space and proper system parameter settings to
                  accommodate the installation. This section describes the
                  recommended disk space and system parameters.

                  2.8.1  Disk Space Requirements

                  Installing DECwrite requires a certain amount of disk storage
                  space. Once the installation is complete, less storage space
                  is required. Table 2-1 summarizes the storage requirements.

                  The VMSINSTAL command now has an Alternate Working Directory
                  (AWD) option. This allows you to designate a directory other
                  than your working directory for VMSINSTAL to use during the
                  installation. This option is useful if there is little free
                  space on the system disk.

               Note The values in Table 2-1 apply only to the U.S. language
                  variant. See the cover letter in your kit for the values for
                  all other language variants.

                  Table 2-1    Free Disk Blocks Required to Install DECwrite

                  _____________________________________________________________
                              System
                  InstallationDisk[1]_____AWD_Device[1]______Total[1]__________

                  Complete    30,100[2]   30,100[2]          28,000[2]

                  Font Only   1,100[2]    1,100[2]           1,043[2]
                  _____________________________________________________________
                  [1]Working directory.

                  [2]These values are approximate, but are the maximum that
                  the installation will require. The installation procedure
                  reports the actual number of blocks required, which will
                  be slightly less than these values, and may differ from the
                  sample installation in Chapter 3.
                  _____________________________________________________________

                  Use the DCL command SHOW DEVICE to determine the number of
                  free blocks that are presently available on the system disk:

                    $ SHOW DEVICE SYS$SYSDEVICE

               2-6  Preparing for DECwrite Installation on a VMS System

 











                  If the disk does not have enough free blocks, delete
                  unnecessary files to provide space.

                  2.8.2  System Parameter Values

                  Digital recommends that the system parameter WSMAX be set to
                  at least 4,100. On a single-user workstation, it can be set
                  even higher, depending on the amount of workstation memory.

                  The DECwrite executable images and the shared libraries can
                  be installed using the INSTALL utility. Table 2-2 lists the
                  minimum required system parameter values.

                  Table 2-2    Minimum Required Global Pages and Sections

                  _____________________________________________________________
                  System_Parameter____Minimum_Value____________________________

                  GBLPAGES            2,686

                  GBLSECTIONS_________9________________________________________

                  If GBLPAGES or GBLSECTIONS are below the recommended values,
                  VMSINSTAL displays a message. Since installing the DECwrite
                  images and shared libraries is optional, you can safely
                  continue the installation. Make sure to adjust these system
                  parameters before modifying WRITE$STARTUP.COM. See Chapter 4
                  for details.

                  2.8.2.1  Checking Parameter Values   To check the value of
                  one or more parameters, enter the following command at the
                  DCL prompt:

                    $ RUN SYS$SYSTEM:SYSGEN
                    SYSGEN>

                  At the SYSGEN> prompt, use the SHOW command to display the
                  value of each system parameter.

                  After you finish checking parameter values, use the EXIT
                  command to return to DCL level.







                       Preparing for DECwrite Installation on a VMS System  2-7

 











                  2.8.2.2  Calculating GBLPAGES and GBLSECTIONS Parameter
                  Values   The values for GBLPAGES and GBLSECTIONS in Table 2-2
                  indicate that you must have at least 2,686 unused global
                  pages and 9 unused global sections available for the
                  installation.

                  To calculate the number of unused global pages and global
                  sections in your system:

                   1 Use the DCL F$GETSYI lexical function to determine the
                     number of free global pages and global sections:

                       $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLPAGES")
                       $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLSECTS")

                   2 If the number of unused global pages is less than the
                     number specified in Table 2-2, you must increase the value
                     using the AUTOGEN command procedure (instructions follow).

                  The next section describes the procedures for changing
                  these values. For more information, refer to the VMS system
                  management documentation.

                  2.8.2.3  Changing Parameter Values with AUTOGEN   You use
                  the AUTOGEN command procedure to change system parameters.
                  AUTOGEN automatically adjusts values for parameters that need
                  to be changed.

                  To change system parameters with AUTOGEN:

                   1 Edit the SYS$SYSTEM:MODPARAMS.DAT file.

                     For example, to increase the setting for the GBLPAGES
                     system parameter by 2,000, add this line to the file:

                       ADD_GBLPAGES = 2000

                   2 Enter the following command to recalculate your system
                     parameters:

                       $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT

                     AUTOGEN performs an automatic system shutdown and reboots
                     when it has finished. Rebooting your system makes the new
                     parameter values active.

                  For more information about using AUTOGEN, see the instruc-
                  tions on modifying system parameters in the VMS system
                  management documentation.

               2-8  Preparing for DECwrite Installation on a VMS System

 











               2.9  System Disk Backup

                  Make a backup copy of your system disk before you install
                  DECwrite.

                  For more information about backing up your system disk, refer
                  to the VMS system management documentation.









































                       Preparing for DECwrite Installation on a VMS System  2-9

 

















                                                                              3
               ________________________________________________________________

                                                            Installing DECwrite




                  This chapter describes how to run the DECwrite installation
                  procedure. You should allow approximately 56 minutes to
                  complete the entire installation. Before you start installing
                  DECwrite, make sure that your system meets the requirements
                  outlined in Chapter 2.

                  This version of DECwrite supports language switching.
                  You can install multiple DECwrite language variants on a
                  single system. You choose which language variant to use by
                  selecting the language from the Session Manager Language
                  dialog box. See the DECwrite Documentation Supplement for
                  additional information. DECwrite installs the language files
                  in language-specific subdirectories. See Appendix B for a
                  complete listing of these files and directories.

                  Appendix A contains a printout of a typical installation
                  procedure for your reference. Appendix B contains a list of
                  all the files a DECwrite installation installs or modifies.

                  You can install the entire DECwrite kit or just the video
                  fonts required for the DECwrite Equation Editor. If you
                  are installing DECwrite in a VAXcluster that includes
                  workstations, you should install the entire kit. Standalone
                  workstations that always run DECwrite from a remote system
                  require only that the video fonts be installed locally. This
                  allows the workstation to run the DECwrite Equation Editor
                  from the remote system.

                  Similarly, if a standalone workstation user not running
                  DECwrite wants to use either DECwindows Mail or the DDIF
                  viewer to view documents containing equations, then the
                  DECwrite Equation Editor fonts need to be installed on that
                  workstation.

                                                       Installing DECwrite  3-1

 











               3.1  VMSINSTAL Requirements

                  When you invoke the DCL command VMSINSTAL, it checks:

                   _ Whether you are logged in to a privileged account

                   _ Whether you have adequate quotas for installation

                   _ Whether DECnet is up and running

                   _ Whether any users are logged in to the system

                  If VMSINSTAL detects a problem during the installation
                  procedure, it notifies you and asks if you want to continue.
                  To stop the installation and correct the problem, enter NO or
                  press the Return key. After you have made the correction, you
                  can restart the installation.

                  To cancel the installation procedure at any time, press Ctrl
                  /Y. The installation procedure deletes all files it has
                  created up to that point and exits. You can then restart
                  the installation.

                  Digital recommends that you refer to the section on the
                  VMSINSTAL command procedure in your VMS documentation set. In
                  the VMS base documentation set, see the VMS System Manager's
                  Manual. In the VMS full documentation set, see the Guide to
                  Setting Up a VMS System.

               3.2  VMSINSTAL Procedure

                  You must use the VMSINSTAL command procedure to install
                  DECwrite. Follow these steps to begin the installation:

                   1 Log in to a privileged account such as the VMS system
                     manager's account, SYSTEM.

                   2 Send a message requesting that all users log out.

                   3 Enter the following command line to run VMSINSTAL:

               $ @SYS$UPDATE:VMSINSTAL kit-name device-name OPTIONS N

                     where device-name is the device specification for the
                     distribution medium, for example, MUA0: and where kit-name
                     is the language variant DECwrite kit. See Table 3-1 for a
                     list of the languages and their DECwrite kit names.

               3-2  Installing DECwrite

 











                  Table 3-1    DECwrite Kit Names

                  _____________________________________________________________
                  Language_Variant______Kit_Name_______________________________

                  American English      DECWRITE

                  Dutch                 DECWRITENE

                  Finnish               DECWRITESU

                  French                DECWRITEFR

                    Belgian French      DECWRITEFR

                    Swiss French        DECWRITEFR

                  German                DECWRITEDE

                    Swiss German        DECWRITEDE

                  Italian               DECWRITEIT

                    Swiss Italian       DECWRITEIT

                  Norwegian             DECWRITENO

                  Spanish               DECWRITEES

                  Swedish               DECWRITESV

                  UK_English____________DECWRITEGB_____________________________

                     Specifying OPTIONS N indicates that you want to be
                     prompted to display or print the Release Notes.

                     Specifying OPTIONS AWD=device:directory allows you to
                     specify an alternate device that VMSINSTAL will use as the
                     temporary working directory. Specifying this option will
                     create the temporary working directory on the specified
                     device under [000000.DECWRITE011].

                  Note If there is an existing directory of DECWRITE011 under
                     the directory specified or [000000], VMSINSTAL will delete
                     it before restoring the first saveset.



                                                       Installing DECwrite  3-3

 











                     If you do not specify the AWD option, the installation
                     creates the temporary working directory on the system disk
                     by default.

                     VMSINSTAL has several other options, described in the VMS
                     software installation documentation.

                     A message similar to the following appears on your screen:

                       VAX/VMS Software Product Installation Procedure V5.3

               It is 1-JUL-1990 at 15:22.

               Enter a question mark (?) at any time for help.

               Your DECnet network is up and running.
               The following processes are still active:
                 L
                 M
                 N
                 O
                 P
               * Do you want to continue anyway [NO]?

                     DECwindows requires that DECnet be up and running.

                   4 Enter YES and press < Return > to continue the installa-
                     tion.

                     You are asked whether you need to back up your system
                     disk:

               * Are you satisfied with the backup of your system disk [YES]?

                     Generally, you should back up your system disk before
                     any major software installation, as you were instructed
                     in Chapter 2. YES is the default answer. If you backed
                     up your system disk recently, press the Return key to
                     continue.

                     Next, you receive instructions to mount the distribution
                     medium you specified when you invoked VMSINSTAL (in this
                     example, MUA0:). If you did not specify where you would
                     mount the distribution volumes, DECwrite prompts you to
                     identify where you have mounted them.

               Please mount the first volume of the set on MUA0:.
               * Are you ready?

                   5 Mount the medium, then enter YES and press < Return > to
                     indicate that you are ready to continue.

               3-4  Installing DECwrite

 











                     The following messages appear on your screen:

               The following products will be processed:

                 DECWRITE V1.1

                       Beginning installation of DECWRITE V1.1 at 15:22

               %VMSINSTAL-I-RESTORE, Restoring product saveset A ...

                     If you selected OPTIONS N when you first invoked the
                     VMSINSTAL procedure, a menu asks you how you want to
                     handle the Release Notes:

               Release Notes Options:

                       1.  Display release notes
                       2.  Print release notes
                       3.  Both 1 and 2
                       4.  Copy release notes to SYS$HELP
                       5.  Do not display, print or copy release notes

               * Select option [2]:

                     You should review the Release Notes in case they contain
                     any information about changes in the installation
                     procedures. Choosing option 3 displays the Release Notes
                     and prints a copy.

                     If you do choose an option that prints the Release Notes,
                     you are prompted for a print queue:

               * Queue name [SYS$PRINT]:

                   6 Press < Return > to print the Release Notes on SYS$PRINT,
                     or type a different queue name and press < Return >.

                     The screen displays a message similar to the following:

               Job 810 (queue SYS$PRINT, entry 1295) started on SYS$PRINT

                     You are asked whether you want to continue with the
                     installation:

               * Do you want to continue the installation?

                   7 Enter YES to continue, otherwise press < Return >.

                     In either case, the Release Notes are copied to a file in
                     the SYS$HELP directory and you receive a message similar
                     to the following:

                                                       Installing DECwrite  3-5

 











               %VMSINSTAL-I-RELMOVED, The product's release notes have been
               successfully moved to SYS$HELP.

                     The Release Notes are contained in SYS$HELP: and have
                     the name KITNAME011.RELEASE_NOTES where KITNAME is the
                     DECwrite kit name from Table 3-1.

                     Note that the name of the Release Notes file includes the
                     product name and version number.

                     Do not delete Release Notes for previous versions of
                     DECwrite.

                     The screen displays the following messages:

                               DECwrite V1.1 Installation Procedure

                   Programs and databases for the Usage Alert, Electronic
                   Thesaurus licensed from Houghton Mifflin. Copyright (c) 1985,
                   1987 by Houghton Mifflin Company.  International CorrectSpell
                   (c) 1987, 1988 by Houghton Mifflin.  All rights reserved.  US
                   Pat. Nos. 4,508,241, 4,730,269, and 4,771,041.  Canadian Pat.
                   No. 1,203,916.  Thesaurus U.S. Pat. No. 4,724,523.

                   Portions licensed to Digital Equipment Corporation, Maynard,
                   Massachusetts Copyright (c) Frame Technology Corporation 1989.
                   All rights reserved.

               %VMSINSTAL-I-RESTORE, Restoring product saveset B ...

                    You can install the DECwrite kit completely or just the video
                    fonts required to use the DECwrite Equation Editor.

                    If you are installing this kit for use on a workstation, or on a
                    VAXcluster that includes workstations, then you should install
                    the entire kit. This requires 30,018 blocks.

                    If you are installing this kit on a workstation that will only run
                    DECwrite from a remote system, then only the video font files are
                    needed. This requires 1,043 blocks.

                     If you are installing DECwrite in a VAXcluster that
                     includes workstations, you should install the entire
                     kit. Standalone workstations that always run DECwrite
                     from a remote system require only that the video fonts be
                     installed locally. This allows the workstation to run the
                     DECwrite Equation Editor from the remote system.

               3-6  Installing DECwrite

 











                     You receive information about the number of blocks
                     required to install the entire kit or only the video
                     font files. You are then asked if you want to install
                     the entire kit:

               * Do you want to install the entire kit [YES]?

                   8 Press < Return >.

                   Installing entire DECwrite kit....

                     The installation provides a clip art library of images.
                     You can install it in sys$sysdevice:[clipart] by default,
                     or you can install it in another location. DECwrite
                     asks you to identify a directory other than the default
                     directory where you want to place the clip art files.

                    This kit contains an optional library of Encapsulated
                    PostScript pictures, DDIF pictures, and DDIF images.
                    Their total size is 5,460 blocks.

               * Do you want to install the clip art library [YES]?

                     If you entered a ? at the prompt the screen displays the
                     following:

                    The optional clip art library is used with DECwrite's Link to Picture
                    and Link to Image functions.  A small set of clip art is also
                    provided by default in the write$examples: directory. You may choose
                    to install the clip art library on a disk other than the system disk.

               * Do you want to install the clip art library [YES]?

                   9 Press < Return >.

               Specify a device and directory on which to install the clip art library

               * Device and directory[sys$sysdevice:[clipart]]:

                   10 Press < Return > to accept the default directory or enter
                     the name of another directory where you want to place the
                     files. For example:

                 You have chosen the device and directory USER:[SMITH.CLIPART]

               * Is this correct [YES]?

                   11 Press < Return >.

                                                       Installing DECwrite  3-7

 











                     The installation also reinstalls the DECwrite style files.
                     The installation prompts you to make backup copies if you
                     have modified the original style files in cda$library:.

                   *************************************************************

                   Note: This installation will replace the DECwrite supplied
                   style files in CDA$LIBRARY. If you have made modifications to
                   these files, make backup copies before continuing. For
                   example:

                    $ backup/log cda$library:wr_*.doc_style style_files.bck/sav

                   *************************************************************

               * Do you want to continue [YES]?

                   12 Press < Return > if you have made the backup files or if
                     you do not need to preserve them.

                   This kit requires DECchart V1.1 or later.

                     If your system does not have DECchart installed the screen
                     displays the following message:

                   *************************************************************

                   DECchart V1.1 will be installed since it does
                   not exist on your system.

                   *************************************************************

                     If your system does have DECchart Version 1.1 installed,
                     the screen displays the following message:

                   *************************************************************

                   DECchart V1.1 already exists on your system.
                   You may choose to reinstall DECchart V1.1 or
                   use the currently installed version.

                   *************************************************************

               * Do you want to reinstall DECchart [NO]?

                     You should reinstall DECchart if you are installing this
                     kit on a system running multiple language versions of
                     DECwrite. For example, if the French version of DECwrite
                     is currently installed and you are installing the German
                     version, then reinstall DECchart.

               3-8  Installing DECwrite

 











                   13 Enter YES and press < Return >. The screen displays:

                    This kit requires the DECwrite Equation Editor V1.1 or later.

                     If your system does not have the DECwrite Equation Editor
                     V1.1 or later installed, the screen displays the following
                     message.

                    The DECwrite Equation Editor V1.1 will be installed
                    since it does not exist on your system.

                     If your system does have the DECwrite Equation Editor
                     V1.1 or later installed, the screen displays the following
                     message.

                    *************************************************************

                    The DECwrite Equation Editor V1.1 already exists on your
                    system. You may choose to reinstall the Equation Editor
                    or use the currently installed version.

                    *************************************************************
               * Do you want to reinstall the Equation Editor [NO]?

                     You should reinstall the DECwrite Equation Editor if
                     you are installing this kit on a system running multiple
                     language versions of DECwrite. For example, if the French
                     version of DECwrite is currently installed and you are
                     installing the German version, then reinstall the Equation
                     Editor.

                   14 Enter YES and press < Return >. The screen displays:

               * Specify a device on which to install the spell check lexicons [SYS$SYSDEVICE:]:
                 You have chosen the device SYS$SYSDEVICE:

               * Is this correct [YES]?

                   15 Press < Return >. The screen then displays:

                       Product:      DECWRITE-USER
                       Producer:     DEC
                       Version:      1.1
                       Release Date: 4-SEP-1990

               * Does this product have an authorization key registered and loaded?

                     Note that other language variants have different PAKs.

                   16 If your authorization key is registered and loaded, enter
                     YES and press < Return >.

                                                       Installing DECwrite  3-9

 











                     If you answer NO, the screen displays the following
                     messages:

               %VMSINSTAL-W-NOIVP, The IVP will not be run since the DECwrite license
               -VMSINSTAL-W-NOIVP, is not installed.

                    You must register and load the license in order to use DECwrite.
                    It is recommended that the IVP be executed after the DECwrite
                    license has been installed.

                    The IVP consists of several separate command procedures.
                    Execute them as follows:

                         @sys$test:write$ivp           ! DECwrite
                         @sys$test:chart$ivp           ! DECchart
                         @sys$test:lae$ivp             ! American-English lexicon

                    Installation continuing...

                     The installation continues by displaying the following
                     message:

                    Checking/registering INTL-LEXICON-AMERICAN Product Authorization Key...

               * Do you want to run the IVP after the installation [YES]?

                     When you invoke the IVP during the DECwrite installation
                     procedure, the IVP runs DECwrite. To do this, it requires
                     that DECwindows be running and that a workstation display
                     device be defined. If one is not defined, you are prompted
                     for the name of a workstation on which to display the IVP,
                     as follows:

               %VMSINSTAL-W-NODISPLAY, Workstation display not defined

               Enter the node name of the workstation on which to display the IVP
               or press Return to continue and not run the IVP

               * Node name:

                   17 If you are installing DECwrite on your own workstation,
                     enter the name of the workstation.

                     This node name is used to issue a SET DISPLAY command to
                     the appropriate workstation. Note that this requires the
                     Session Manager's security database be set up properly and
                     that nodes are defined properly in the network databases.
                     For example, if you are installing DECwrite on your own
                     workstation and you have SET HOST 0 from your own account
                     to use the SYSTEM account, then you must add 0::SYSTEM to

               3-10  Installing DECwrite

 











                     the security database. See the DECwindows User's Guide for
                     details on the Session Manager's security database.

                     If you are NOT installing DECwrite from a workstation,
                     then do not run the IVP. Instead, use a workstation to run
                     the IVP after the installation is completed.

                     If you are installing DECwrite from a workstation, but one
                     that is NOT running DECnet, then do not run the IVP during
                     the installation. Instead, execute the IVP from DCL after
                     the installation is completed, making sure that a display
                     device is defined using the local transport (see the SET
                     DISPLAY DCL command).

                            The language in the Language dialog box on the Session
                            Manager's Customization menu must be set to English
                            in order to run the IVP. Ensure the language is set accordingly
                            before continuing.

                       * Press Return when ready to continue:

                     The script will reflect the name of the language variant
                     that you are installing.

                   18 When you install DECwrite, set the language you will use
                     in the Session Manager, otherwise the IVP will fail.

                  Note The Session Manager's language setting should match
                     the language of the DECwrite language variant you are
                     installing.

                     To set the language, choose Language from the Session
                     Manager Customize menu and choose the appropriate language
                     from the Language dialog box.

                     You are asked whether you want to purge (delete) old
                     versions of files replaced by this installation:

               * Do you want to purge files replaced by this installation [YES]?

                     Purging is recommended.

                   19 Press < Return > to purge old versions of the files. To
                     save old files, or if you are installing DECwrite for the
                     first time, enter NO and press < Return >.

                   20 The screen displays the following messages:

                                                      Installing DECwrite  3-11

 











                   To complete the installation on a standalone VAX 11/780
                   will take approximately:

                       50 minutes to install
                       6 minutes to run the IVP

                   All required questions have been asked.
                   You can terminate the installation procedure at this time.

               * Do you want to continue the installation [YES]?

                   21 Press < Return > to continue the installation.

                     The screen displays the following messages:

               %VMSINSTAL-I-RESTORE, Restoring product save set C ...
               %VMSINSTAL-I-RESTORE, Restoring product save set D ...
               %VMSINSTAL-I-RESTORE, Restoring product save set E ...
               %VMSINSTAL-I-RESTORE, Restoring product save set F ...

                     If you are installing or reinstalling DECchart the screen
                     also displays the following messages:

               %VMSINSTAL-I-RESTORE, Restoring product save set G ...
               %VMSINSTAL-I-RESTORE, Restoring product save set H ...

                     The installation then continues the installation procedure
                     by displaying:

               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE].

                   The on-line demonstration document, WRITEDEMO.DOC and the
                   documents used in the Getting Started exercises are in:

                             VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE]












               3-12  Installing DECwrite

 











               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE.EQUATION_FONT_BDF].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE.EQUATION_FONT_BDF.75DPI].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE.EQUATION_FONT_BDF.100DPI].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSTEST.DECWRITE].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[LCI.LEXICONS].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.EPS].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.ARROWS].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.BUILDING].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.COMMUNIC].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.ENERGY].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.SPORTS].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.FIGURES].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.FINANCE].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.GOVERNMNT].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.SCIENCE].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSTEST.CHART$IVP].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECCHART].
               %VMSINSTAL-I-RESTORE, Restoring product save set I ...
               %VMSINSTAL-I-RESTORE, Restoring product save set J ...

                    The following command must be added to the system startup
                    command file SYS$MANAGER:SYSTARTUP_V5.COM for all nodes that will
                    be running DECwrite:

                       @sys$startup:write$startup
                       @sys$startup:lci$startup.com   ! American-English lexicon



                                                      Installing DECwrite  3-13

 











                   If you are installing this kit on a workstation, you should
                   restart DECwindows after the installation has completed:

                         @sys$startup:decw$startup restart

               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...










































               3-14  Installing DECwrite

 











                     The installation then executes the IVP if you answered
                     yes, as follows:

               %VMSINSTAL-I-RUNIVP, Executing installation verification procedure(s)

               Executing IVP for: DECwrite V1.1

                   The IVP edits a sample document. If the document looks the same as
                   the illustration in the installation guide, then the installation
                   has been successful. After the document window appears, click the
                   mouse in the window to assign input focus, and enter Alt-Q (hold
                   down the Compose Character or "Alt" key and press Q) to quit
                   DECwrite and the DECwrite portion of the IVP.

                    Starting DECwrite....

                   22 Follow the instructions in the message. The document
                     displayed on the screen should look like Figure 3-1.

                     The screen displays the following messages:




























                                                      Installing DECwrite  3-15

 











                       *************************************

                       DECwrite V1.1

                       IVP COMPLETED SUCCESSFULLY

                       *************************************

               IVP completed for: DECwrite V1.1

               Executing IVP for:  International Lexicon/American for VMS V1.0

                       ********************************************

                       International Lexicon/American for VMS V1.0

                       IVP COMPLETED SUCCESSFULLY

                       *********************************************

               IVP completed for:  International Lexicon/American for VMS V1.0
               Executing IVP for:  DECchart

                       *************************************
                       DECchart V1.1
                       IVP COMPLETED SUCCESSFULLY
                       *************************************
               IVP completed for: DECchart V1.1
                       Installation of DECWRITE V1.1 completed at 15:47

               Enter the products to be processed from the next distribution volume set.
               * Products: ^Z

                       VMSINSTAL procedure done at 15:48

               Note VMSINSTAL will execute all of the DECwrite component IVP
                  procedures (DECwrite itself, DECchart, International Lexicon
                  /American English) and exit successfully. Any errors will be
                  reported by the individual IVP.

                  The installation is complete. Refer to the postinstallation
                  procedures in Chapter 4.






               3-16  Installing DECwrite

 

















                                                                              4
               ________________________________________________________________

                                           DECwrite Postinstallation Procedures




                  This chapter describes tasks you must complete after you
                  install DECwrite.

               4.1  Editing Startup Files

                  You must edit the system startup file SYSTARTUP_V5.COM and,
                  optionally, WRITE$STARTUP.COM before using DECwrite.

                  4.1.1  Editing SYSTARTUP_V5.COM

                  Add the following lines to SYS$MANAGER:SYSTARTUP_V5.COM:

                    $ @SYS$STARTUP:WRITE$STARTUP.COM        ! DECwrite
                    $ @SYS$STARTUP:LCI$STARTUP.COM          ! International Lexicons

               Note If an international lexicon has previously been installed,
                  LCI$STARTUP.COM should be in SYS$MANAGER:SYSTARTUP_V5.COM.

                  If you install a DECwrite language variant, make sure that
                  you use the proper parameter with WRITE$STARTUP.COM. Also,
                  add DECW$STARTI18N.COM to SYS$STARTUP.COM. For example:

                    $ @SYS$STARTUP:WRITE$STARTUP "parameter"
                    $ @SYS$MANAGER:DECWSTARTI18N "parameter"

                  where the parameter identifies the DECwrite language variant
                  you are installing. See Table 4-1 for a list of these
                  language parameters.






                                      DECwrite Postinstallation Procedures  4-1

 











               Note The line for the language variants must come after the line
                  that starts the network.

                  For example, in SYS$MANAGER:SYSTARTUP_V5.COM, you might see:

                    $ @SYS$MANAGER:STARTNET.COM
                            .
                            .
                            .
                    $ @SYS$MANAGER:DECW$STARTI18N.COM "parameter"

                  where the parameter identifies the DECwrite language variant
                  you are installing. See Table 4-1 for a list of these
                  language parameters.


































               4-2  DECwrite Postinstallation Procedures

 











                  Table 4-1    Language Parameters

                  _____________________________________________________________
                  Language________Parameter____________________________________

                  American        none required
                  English

                  Belgian French  FR_BE

                  Dutch           NL_NL

                  French          FR_FR

                  French          FR_CA
                  Canadian

                  German          DE_DE

                  Italian         IT_IT

                  Norwegian       NO_NO

                  Spanish         ES_ES

                  Swedish         SV_SE

                  Swiss French    FR_CH

                  Swiss German    DE_CH

                  Swiss Italian   IT_CH

                  UK_English______EN_GB________________________________________

                  You can start multiple languages on the same line in
                  SYSTARTUP_V5.COM by separating the parameters by commas.
                  For example, the following command would start Dutch, French,
                  and German:

                    $ @SYS$STARTUP:WRITE$STARTUP "NL_NL,FR_FR,DE_DE"
                    $ @SYS$STARTUP:DECW$STARTI18N "NL_NL,FR_FR,DE_DE"






                                      DECwrite Postinstallation Procedures  4-3

 











                  4.1.2  Editing WRITE$STARTUP.COM

                  WRITE$STARTUP defines the logical WRITE$EXAMPLES to point to
                  the DECwrite examples directory, SYS$COMMON:[SYSHELP.EXAMPLES.DECWRITE].

                  When installing a DECwrite language variant, the installation
                  places the DECwrite examples in a language specific subdirec-
                  tory. This subdirectory is SYS$COMMON:[SYSHELP.EXAMPLES.XX_
                  YY.DECWRITE], where XX_YY is the language parameter.
                  See Table 4-1 for a list of the language parameters.
                  Uncomment the appropriate lines in WRITE$STARTUP that define
                  WRITE$EXAMPLES.

                  WRITE$STARTUP defines the logical WRITE$CLIPART to point to
                  the DECwrite clip art directory. The default at installation
                  time is SYS$SYSDEVICE:[CLIPART]. See Appendix B for a
                  complete listing of the DECwrite demonstration and clip art
                  files. If you installed the clip art in a directory different
                  from the default directory, then redefine the logical to
                  point to that clip art directory. For example:

                    $ DEFINE/SYSTEM/EXE WRITE$CLIPART:USER:[SMITH.CLIPART.]/TRANS=CONCEALED

                  By default, all the INSTALL commands in WRITE$STARTUP.COM
                  are commented out. You can optionally remove the comments
                  for the images and shared libraries you want to install. This
                  improves system performance on systems where multiple users
                  are running DECwrite concurrently.

                  Make sure you have completed the steps in Section 2.8 before
                  executing WRITE$STARTUP.COM on a standalone system or on
                  other nodes in a VAXcluster.

               4.2  Installing DECwrite on a Standalone System

                  If you have installed DECwrite on a standalone workstation,
                  you must restart the DECwindows server so that it can use
                  the new fonts required by the DECwrite Equation Editor. Enter
                  @SYS$STARTUP:DECW$STARTUP RESTART to restart the server.

               Note This will log you out of your workstation session.







               4-4  DECwrite Postinstallation Procedures

 











               4.3  Installing DECwrite on a VAXcluster

                  To install DECwrite on a cluster with a common system disk,
                  make sure you load the DECwrite license and the American
                  English lexicon license on each node in the cluster.

                  To load the licenses, enter the following commands:

                    $mc sysman
                    SYSMAN> set environment/cluster/user=system
                    Remote Password: <system password for the cluster nodes>
                    SYSMAN> do license load LICENSE NAME

                  Where LICENSE NAME is the language variant kit name.

                    SYSMAN> do license load intl-lexicon

                  Where intl-lexicon is the name of the spell lexicon.
                  Table 4-2 lists the available lexicons.

                  Table 4-2    International Spell Lexicons

                  _____________________________________________________________
                  Name__________________Description____________________________

                  INTL-LEXICON-AM-BUS   American Business

                  INTL-LEXICON-AM-MED   American Medical

                  INTL-LEXICON-         American English
                  AMERICAN

                  INTL-LEXICON-         British English
                  BRITISH-ENG

                  INTL-LEXICON-DEUTSCH  German

                  INTL-LEXICON-ESPAŃOL  Spanish

                  INTL-LEXICON-         French
                  FRANCAIS

                  INTL-LEXICON-         Dutch
                  NEDERLANDS

                                                       (continued on next page)


                                      DECwrite Postinstallation Procedures  4-5

 











                  Table 4-2 (Cont.)    International Spell Lexicons

                  _____________________________________________________________
                  Name__________________Description____________________________

                  INTL-LEXICON-SVENSKA__Swedish________________________________

                    SYSMAN> do @sys$startup:lci$startup
                    SYSMAN> do @sys$startup:write$startup PARAMETER
                    SYSMAN> do @sys$startup:decw$startup restart ! If there are
                    no active users. Only required for workstations
                    SYSMAN> do @sys$manager:decwstarti18n PARAMETER
                    !DECwrite language variants

                  Where PARAMETER is the name of the language parameter from
                  Table 4-1.

                    SYSMAN> exit

               4.4  Rebooting the System

                  You can reboot your system after you have installed
                  DECwrite and reset the system parameters (if necessary).
                  A system reboot verifies that DECwrite is ready for use and
                  establishes any new parameter settings. Note, however, that
                  rebooting is optional.

               4.5  User Account Requirements

                  To use DECwrite, user accounts on your system must have
                  certain privileges and quotas. The next two sections contain
                  information about these requirements.

                  4.5.1  Privileges

                  To use DECwrite, each account must have at least the TMPMBX
                  and NETMBX privileges. Use the VMS Authorize Utility to
                  determine whether users have the privileges they require.

                  4.5.2  User Account Quotas

                  You must make sure that the appropriate user accounts have
                  sufficient quotas to be able to use DECwrite. Table 4-3
                  summarizes minimum recommended process quotas.




               4-6  DECwrite Postinstallation Procedures

 











                  Table 4-3    User Account Quotas

                  _____________________________________________________________
                  Account_Quota____Value_______________________________________

                  ASTLM            100

                  BIOLM            40

                  DIOLM            40

                  FILLM            40

                  TQELM            20

                  ENQLM            110

                  WSDEF            256

                  WSQUOTA          512

                  WSEXTENT         4,100[1]
                  _____________________________________________________________
                  [1]On a single-user workstation, the value of the system
                  parameter WSEXTENT can be set equal to the value of WSMAX for
                  better performance.
                  _____________________________________________________________

                  User account quotas are stored in the file SYSUAF.DAT. Use
                  the Authorize Utility to verify and change user account
                  quotas. First set your directory to SYS$SYSTEM and then run
                  AUTHORIZE:

                    $ SET DEFAULT SYS$SYSTEM
                    $ RUN AUTHORIZE
                    UAF>

                  At the AUTHORIZE prompt (UAF>), use the SHOW command with an
                  account name to check a particular account. For example:

                    UAF> SHOW SMITH

                  To change a quota, use the MODIFY command at the UAF> prompt.
                  MODIFY has the following format:

                         MODIFY account-name /quota-name=nnnn


                                      DECwrite Postinstallation Procedures  4-7

 











                  The following example changes the FILLM quota for the SMITH
                  account and then exits from the utility:

                    UAF> MODIFY SMITH /FILLM=40
                    UAF> EXIT

                  After you exit from the utility, the VMS system displays
                  messages indicating whether or not changes were made. Once
                  you have finished making the changes, the users must log out
                  and log in again for the new quotas to take effect.

                  For more information about modifying account quotas, see
                  the description of the Authorize Utility in the VMS system
                  management and operations documentation.

               4.6  Tuning Your System

                  After you install DECwrite, you might want to adjust your
                  system to enhance performance or lower the use of some system
                  resources. Information about tuning your system is included
                  in the VMS System Management, Volume 4, Performance manual.

               4.7  Selecting a Language

                  You need to specify what language you will use when you run
                  a DECwrite language variant. Select the language by choosing
                  Language from the Customize menu in the Session Manager. See
                  the DECwrite Documentation Supplement for details.

               4.8  Installation Verification Procedures

                  The DECwrite Installation Verification Procedure runs
                  automatically at the end of the DECwrite installation
                  procedure if you enter YES to that option during the
                  installation.

               Note Before you run the IVP for any language, you must first set
                  the language you will use in the Language item of the Session
                  Manager's Customize menu.

                  If you did not enter YES, you may want to run the IVP
                  later. If run later, the IVP needs three separate command
                  procedures:

                    $ @SYS$TEST:WRITE$IVP.COM         ! DECwrite
                    $ @SYS$TEST:CHART$IVP.COM         ! DECchart
                    $ @SYS$TEST:LAE$IVP.COM           ! American-English lexicon

               4-8  DECwrite Postinstallation Procedures

 











                  You receive a message indicating whether the IVP succeeded or
                  failed.

               4.9  Running DECwrite from FileView

                  As part of the installation, DECwrite is added to the
                  FileView Applications menu. You should inform all users after
                  the installation that DECwrite is now available as an option
                  on their FileView Applications menu.

                  If you install a language variant of DECwrite on a system
                  where the same language variant of FileView exists, DECwrite
                  is added to the FileView Applications menu.

                  For more information on FileView, refer to the DECwindows
                  User's Guide.

               4.10  Running DECwrite from DCL

                  To run DECwrite from the DCL command line, enter at the $
                  prompt:

                  run sys$system:decwrite

                  You can also add a line to your login.com file to define a
                  symbol to run DECwrite. For example:

                    decwrite :== $ sys$system:decwrite

                  A user could, after logging out and then logging back in or
                  running login.com, enter at the DCL $ prompt:

                    decwrite filename

                  This would invoke DECwrite and open the named document.

               4.11  DECwrite Sample Document

                  During installation, DECwrite places sample files for each of
                  its components in the following directories:

                   _ WRITE$EXAMPLES or WRITE$EXAMPLES_XX_YY:

                     where _XX_YY refers to any non-American English language
                     parameter codes shown in Table 4-1.

                   _ SYS$COMMON:[SYSHLP.EXAMPLES.DECCHART]

                  The DECWRITE directory contains:

                   _ The documents used for the Getting Started exercises

                   _ Several demonstration documents

                                      DECwrite Postinstallation Procedures  4-9

 











                   _ A sample equation for use with the DECwrite Equation

                     Editor

                   _ Several sample Encapsulated PostScript files for use with

                     the DECwrite Link to Picture option

                  For instructions on using the DECwrite Getting Started
                  exercises and the demonstration document, refer to the
                  DECwrite Getting Started book and the DECwrite User's Guide.

                  The DECCHART directory contains a sample chart file used in
                  the DECchart Getting Started exercises. For instructions on
                  the DECchart Getting Started exercises, refer to the DECchart
                  Getting Started book.

               4.12  Determining and Reporting Problems

                  If you encounter a problem while using DECwrite, report it
                  to Digital. Depending on the nature of the problem and the
                  type of support you have, you can take one of the following
                  actions:

                   _ Call Digital if your software contract or warranty

                     agreement entitles you to telephone support.

                   _ Submit a Software Performance Report (SPR).

                   _ Fill out and submit a Reader's Comments form if the

                     problem has to do with the DECwrite documentation. There
                     are Reader's Comments forms at the back of each manual.
                     Use the form from the manual in which you found the error.
                     Include the section and page number.

                  Review the Software Product Description (SPD) and Warranty
                  Addendum for warranty information. If you encounter a problem
                  during the warranty period, report the problem as indicated
                  above or follow alternate instructions provided by Digital
                  for reporting SPD nonconformance problems.






               4-10  DECwrite Postinstallation Procedures

 

















                                                                              5
               ________________________________________________________________

                                                Using the DECwrite Font Utility




                  The DECwrite Font Utility is a program that allows users to
                  add new fonts or delete exisiting fonts from the DECwrite
                  font family menu. See Table 5-1 for the Font Utility's
                  commands, formats, and descriptions.

                  If you include a font using the Font Utility that does not
                  have an equivalent weight or slant in DECwrite, DECwrite
                  maps the weight and slant of the imported font to a weight or
                  slant that it does use.

               5.1  Preparing to Run the Font Utility

                  To prepare to run the font utility you must first:

                   _ Install all screen fonts in the SYS$COMMON:[SYSFONT.DECW.USER_

                     75DPI] for 75 dpi font directories or SYS$COMMON:[SYSFONT.DECW.USER_
                     100DPI] for 100 dpi font directories and make them known
                     to the DECwindows server by restarting the server.

                   _ Install all corresponding Adobe Font Metric (.AFM) and .PS

                     outline files in the SYS$PS_FONT_METRICS: directory.

                   _ Ensure that you have defined your display. (See Chapter

                     3.)

                  After adding new fonts to DECwrite, enter the following
                  command.

                    SET FILE /PROTECTION=(W:RE) SYS$LIBRARY:WRITE$FONTS.INI

                  If you do not issue this command, DECwrite displays an error
                  message saying that it cannot open WRITE$FONTS.INI and exits.

                                           Using the DECwrite Font Utility  5-1

 











               5.2  Starting the Font Utility

                  The font utility's initialization will require approximately
                  30-60 seconds. Infilename and outfilename refer to the
                  DECwrite font initialization file.

                  At the $ prompt, enter:

                    write$fontutil infilename

                  or

                    write$fontutil infilename outfilename

                  The screen displays:

                     Font Utility V1.1
                     You may have to wait 30-60 seconds while this utility initializes...
                     Enter command>

               5.3  Font Utility Commands and Descriptions

                  The DECwrite Font Utility allows users to manage additional
                  fonts not shipped with DECwrite. Below are more details on
                  each of the available commands.

                  Each of these commands uses two font lists. The add list
                  contains font families that can be added to the DECwrite
                  menu. The menu list contains font families that are already
                  part of the DECwrite menu. Table 5-1 shows the Font Utility's
                  commands, formats, and some explanation of them.

                  Table 5-1    DECwrite Font Utility Messages

                  _____________________________________________________________
                  Command___Format,_Effects,_and_Descriptions__________________

                  Add       Add "fontname"

                            Displays one new font family if you specify a
                            fontname, places it (fontname) on the menu list,
                            and removes it from the add list.

                            If you do not specify the fontname, the add command
                            prompts you for it with the prompt Family name:.
                            If you press the Return key without specifying a
                            fontname, the add command changes nothing.

                                                       (continued on next page)

               5-2  Using the DECwrite Font Utility

 











                  Table 5-1 (Cont.)    DECwrite Font Utility Messages

                  _____________________________________________________________
                  Command___Format,_Effects,_and_Descriptions__________________

                  Hide      Hide "fontname"

                            Hides the fontname from the menu list. Hidden or
                            invisible fonts are available to existing DECwrite
                            files read in, but are not visible on the DECwrite
                            Font Family Menu. This feature is useful for hiding
                            the DECmath fonts from the menu or for permitting
                            a user to exclude a standard DECwrite font without
                            deleting it.

                            If you do not specify the fontname, the Hide
                            command prompts for it with Family name:. If you
                            press the Return key, the Hide command changes
                            nothing.

                  Delete    Delete "fontname"

                            Deletes the indicated fontname from the menu list,
                            adding it to the add list.

                            If you do not specify the fontname, the delete
                            command prompts you for it with Family name:.
                            If you press the Return key, the delete command
                            changes nothing.

                                                       (continued on next page)

















                                           Using the DECwrite Font Utility  5-3

 











                  Table 5-1 (Cont.)    DECwrite Font Utility Messages

                  _____________________________________________________________
                  Command___Format,_Effects,_and_Descriptions__________________

                  Exit      Exit outfilename

                            Saves the changes made to the infilename to the
                            outfilename. If you do not specify the outfilename
                            on the command line, the exit command uses the
                            following defaults:

                             _ If you specify outfilename in the startup

                               command line

                            $ write$fontutil infilename outfilename

                               or

                             _ If you specify infilename in the startup command

                               line

                            $ write$fontutil infilename

                            In either case, DECwrite verifies that you want
                            to write to the indicated file. This is especially
                            important if the infilename would be overwritten by
                            the changes you have just made.

                  Quit      Quit

                            Terminates session without saving changes.

                            If you made changes to the infilename, the font
                            utility prompts you to confirm that you want to
                            quit without saving your changes. If you answer
                            yes, the font utility's session terminates without
                            saving any changes. If you answer no, the utility
                            saves no changes and the font utility continues
                            running.

                            If you have made no changes to the infilename, the
                            font utility session ends without confirmation.

                                                       (continued on next page)

               5-4  Using the DECwrite Font Utility

 











                  Table 5-1 (Cont.)    DECwrite Font Utility Messages

                  _____________________________________________________________
                  Command___Format,_Effects,_and_Descriptions__________________

                  Rename    Rename "oldfontname" "newfontname"

                            Renames the indicated font family to a new font
                            name.

                            The font names are the same names displayed on the
                            DECwrite Font Family Menu. Changing this name does
                            not affect DECwrite internal font names that are
                            used in looking up a font chosen during a DECwrite
                            session.

                            If you do not specify oldfontname, newfontname, or
                            both names, the rename command asks for the omitted
                            information with the prompts From:  and To:  for
                            the oldfontname and newfontname, respectively. If
                            you press the Return key at either of these prompts
                            without entering a font name, DECwrite abandons the
                            rename command.

                  Show      Show [Full] [Add|Menu] "fontname"

                            Displays the indicated fonts and optionally their
                            corresponding screen font names, .PS filenames, and
                            .AFM filenames.

                            If you do not specify a fontname or an option,
                            the Show command defaults to Show Menu showing all
                            entries in the menu list.

                             _ Add

                               Displays all entries in the Add or displays if
                               you specify a fontname.

                             _ Full

                               Displays additional information consisting
                               of screen font names, .PS filenames, and .AFM
                               filenames.

                             _ Menu

                               Displays all entries in the menu list or
                               displays an entry if you specify a fontname.

                                                       (continued on next page)

                                           Using the DECwrite Font Utility  5-5

 











                  Table 5-1 (Cont.)    DECwrite Font Utility Messages

                  _____________________________________________________________
                  Command___Format,_Effects,_and_Descriptions__________________

                  Reveal    Reveal "fontname"

                            Displays the indicated hidden fontname on the menu
                            list. See the Hide command for details about hidden
                            fonts.

                            If you do not specify the fontname, the Reveal
                            command prompts you for it with Family name:.
                            If you press the Return key without specifying
                  __________a_fontname,_the_utility_displays_nothing.__________

































               5-6  Using the DECwrite Font Utility

 

















                                                                              A
               ________________________________________________________________

                                   Printouts from Sample DECwrite Installations




                  This appendix contains printouts of typical DECwrite
                  installation procedures. These procedures show:

                   _ A full DECwrite installation

                   _ A font only installation

                  To perform a successful installation, you must:

                   1 Prepare your system by completing the procedure in
                     Chapter 2.

                   2 Install DECwrite by completing the installation procedure
                     described in Chapter 3.

                   3 Perform any needed postinstallation procedures described
                     in Chapter 4.

               A.1  Full DECwrite Installation

                  This sample installation printout shows the user responses
                  and system messages when all the appropriate licenses have
                  been installed.

               $ @sys$update:vmsinstal decwrite011 mua0

               VAX/VMS Software Product Installation Procedure V5.3

               It is 19-JUL-1990 at 10:40.

               Enter a question mark (?) at any time for help.



                              Printouts from Sample DECwrite Installations  A-1

 











               %VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account.
               %VMSINSTAL-W-ACTIVE, The following processes are still active:
                       VWSLAT
                       SMITH
                       JONES
                       DECterm 3-1
                       Notes

               * Do you want to continue anyway [NO]? yes
               * Are you satisfied with the backup of your system disk [YES]?

               The following products will be processed:
                 DECWRITE V1.1
                        Beginning installation of DECWRITEBL3 V1.1 at 10:41

               %VMSINSTAL-I-RESTORE, Restoring product save set A ...
               %VMSINSTAL-I-RELMOVED, The product's release notes have been successfully
               moved to SYS$HELP.

                               DECwrite V1.1 Installation Procedure

                   Programs and databases for the Usage Alert, Electronic
                   Thesaurus licensed from Houghton Mifflin. Copyright (c) 1985,
                   1987 by Houghton Mifflin Company.  International CorrectSpell
                   (c) 1987, 1988 by Houghton Mifflin.  All rights reserved.  US
                   Pat. Nos. 4,508,241, 4,730,269, and 4,771,041.  Canadian Pat.
                   No. 1,203,916.  Thesaurus U.S. Pat. No. 4,724,523.

                   Portions licensed to Digital Equipment Corporation, Maynard,
                   Massachusetts Copyright (c) Frame Technology Corporation 1989.
                   All rights reserved.

               %VMSINSTAL-I-RESTORE, Restoring product save set B ...

                    You can install the DECwrite kit completely or just the video
                    fonts required to use the DECwrite Equation Editor.

                    If you are installing this kit for use on a workstation, or on a
                    VAXcluster that includes workstations, then you should install
                    the entire kit. This requires 30,018 blocks.

                    If you are installing this kit on a workstation that will only run
                    DECwrite from a remote system, then only the video font files are
                    needed. This requires 1,043 blocks.

               * Do you want to install the entire kit [YES]?

                    Installing entire DECwrite kit....

               A-2  Printouts from Sample DECwrite Installations

 











                    This kit contains an optional library of Encapsulated
                    PostScript pictures, DDIF pictures, and DDIF images.
                    Their total size is 5,460 blocks.

               * Do you want to install the clip art library [YES]? ?

                    The optional clip art library is used with DECwrite's Link to Picture
                    and Link to Image functions.  A small set of clip art is also
                    provided by default in the write$examples: directory. You may choose
                    to install the clip art library on a disk other than the system disk.

               * Do you want to install the clip art library [YES]?

               Specify a device and directory on which to install the clip art library

               * Device and directory [sys$sysdevice:[clipart]]: user:[smith.clipart]
                 You have chosen the device and directory user:[smith.clipart]

               * Is this correct [YES]?

                   *************************************************************

                   Note: This installation will replace the DECwrite supplied
                   style files in CDA$LIBRARY. If you have made modifications to
                   these files, make backup copies before continuing. For
                   example:

                    $ backup/log cda$library:wr_*.doc_style style_files.bck/sav

                   *************************************************************

               * Do you want to continue [YES]?

                   This kit requires DECchart V1.1 or later.

                   *************************************************************

                   DECchart V1.1 will be installed since it does
                   not exist on your system.

                   *************************************************************

                    This kit requires the DECwrite Equation Editor V1.1 or later.

                    The DECwrite Equation Editor V1.1 will be installed
                    since it does not exist on your system.

                    The DECwrite spell check lexicons will be installed in the directory
                    SYS$SYSDEVICE:[LCI.LEXICONS] by default. You may optionally install the
                    files on a device other than the system disk.

               * Specify a device on which to install the spell check lexicons [SYS$SYSDEVICE:]:
                 You have chosen the device SYS$SYSDEVICE:

                              Printouts from Sample DECwrite Installations  A-3

 











               * Is this correct [YES]?

                               Product:      DECWRITE-USER
                               Producer:     DEC
                               Version:      1.1
                               Release Date: 4-SEP-1990

               * Does this product have an authorization key registered and loaded? y

                    Checking/registering INTL-LEXICON-AMERICAN  Product Authorization Key...

               * Do you want to run the IVP after the installation [YES]?

               %VMSINSTAL-W-NODISPLAY, Workstation display not defined

               Enter the node name of the workstation on which to display the IVP
               or press Return to continue and not run the IVP

               * Node name: mine

                    The language in the Language dialog box on the Session
                    Manager's Customization menu must be set to English
                    in order to run the IVP. Ensure the language is set accordingly
                    before continuing.

               * Press Return when ready to continue:

               * Do you want to purge files replaced by this installation [YES]?

                   To complete the installation on a standalone VAX 11/780
                   will take approximately:

                       50 minutes to install
                       6 minutes to run the IVP

                   All required questions have been asked.
                   You can terminate the installation procedure at this time.

               * Do you want to continue the installation [YES]?
               %VMSINSTAL-I-RESTORE, Restoring product save set C ...
               %VMSINSTAL-I-RESTORE, Restoring product save set D ...
               %VMSINSTAL-I-RESTORE, Restoring product save set E ...
               %VMSINSTAL-I-RESTORE, Restoring product save set F ...
               %VMSINSTAL-I-RESTORE, Restoring product save set G ...
               %VMSINSTAL-I-RESTORE, Restoring product save set H ...
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE].

                    The on-line demonstration document, WRITEDEMO.DOC and the
                    documents used in the Getting Started exercises are in:

                         VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE]

               A-4  Printouts from Sample DECwrite Installations

 











               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE.EQUATION_FONT_BDF].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE.EQUATION_FONT_BDF.75DPI].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECWRITE.EQUATION_FONT_BDF.100DPI].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSTEST.DECWRITE].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[LCI.LEXICONS].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.EPS].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.ARROWS].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.BUILDING].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.COMMUNIC].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.ENERGY].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.SPORTS].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.FIGURES].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.FINANCE].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.GOVERNMNT].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               SYS$SYSDEVICE:[CLIPART.SCIENCE].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSTEST.CHART$IVP].
               %VMSINSTAL-I-SYSDIR, This product creates system disk directory
               VMI$ROOT:[SYSHLP.EXAMPLES.DECCHART].
               %VMSINSTAL-I-RESTORE, Restoring product save set I ...
               %VMSINSTAL-I-RESTORE, Restoring product save set J ...

                    The following commands must be added to the system startup
                    command file SYS$MANAGER:SYSTARTUP_V5.COM for all nodes that will
                    be running DECwrite:

                         @sys$startup:write$startup
                         @sys$startup:lci$startup.com     ! American-English lexicon



                              Printouts from Sample DECwrite Installations  A-5

 











                    If you are installing this kit on a workstation, you should
                    restart DECwindows after the installation has completed:

                         @sys$startup:decw$startup restart

               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
               %VMSINSTAL-I-RUNIVP, Executing installation verification procedure(s)

               Executing IVP for: DECwrite V1.1

                   The IVP edits a sample document. If the document looks the same as
                   the illustration in the installation guide, then the installation
                   has been successful. After the document windows appears, click the
                   mouse in the window to assign input focus, and type Alt/Q (hold
                   down the Compose Character or "Alt" key and press Q) to quit
                   DECwrite and complete the DECwrite portion of the IVP.

                       Starting DECwrite....

                       *************************************

                       DECwrite V1.1

                       IVP COMPLETED SUCCESSFULLY

                       *************************************

               IVP completed for: DECwrite V1.1

               Executing IVP for:  International Lexicon/American for VMS V1.0

                       ********************************************

                       International Lexicon/American for VMS V1.0

                       IVP COMPLETED SUCCESSFULLY

                       *********************************************

               IVP completed for:  International Lexicon/American for VMS V1.0
               Executing IVP for:  DECchart V1.1
                       *************************************
                       DECchart V1.1
                       IVP COMPLETED SUCCESSFULLY
                       *************************************
               IVP completed for: DECchart V1.1
                       Installation of DECWRITE V1.1 completed at 11:15

                       VMSINSTAL procedure done at 11:16

               A-6  Printouts from Sample DECwrite Installations

 











               A.2  Font Only DECwrite Installation

                  This sample installation printout shows the user responses
                  and system messages when all the appropriate licenses
                  have been installed, and the user selects a font only
                  installation.

               $ @vmsinstal decwrite011 mua0: options s

                       VAX/VMS Software Product Installation Procedure V5.3

               It is 19-JUL-1990 at 16:20.

               Enter a question mark (?) at any time for help.

               %VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account.
               %VMSINSTAL-W-ACTIVE, The following processes are still active:
                       SMITH
                       JONES
                       DECterm 2
                       Mail
                       DECterm 3
                       Notes

               * Do you want to continue anyway [NO]? yes
               * Are you satisfied with the backup of your system disk [YES]?

               The following products will be processed:

                 DECWRITE V1.1

                        Beginning installation of DECWRITE V1.1 at 16:20

               %VMSINSTAL-I-RESTORE, Restoring product save set A ...
               %VMSINSTAL-I-RELMOVED, The product's release notes have been successfully

               moved to SYS$HELP.

                               DECwrite V1.1 Installation Procedure

                   Programs and databases for the Usage Alert, Electronic
                   Thesaurus licensed from Houghton Mifflin. Copyright (c) 1985,
                   1987 by Houghton Mifflin Company.  International CorrectSpell
                   (c) 1987, 1988 by Houghton Mifflin.  All rights reserved.  US
                   Pat. Nos. 4,508,241, 4,730,269, and 4,771,041.  Canadian Pat.
                   No. 1,203,916.  Thesaurus U.S. Pat. No. 4,724,523.

                   Portions licensed to Digital Equipment Corporation, Maynard,
                   Massachusetts Copyright (c) Frame Technology Corporation 1989.
                   All rights reserved.

               %VMSINSTAL-I-RESTORE, Restoring product save set B ...

                              Printouts from Sample DECwrite Installations  A-7

 











                    You can install the DECwrite kit completely or just the video
                    fonts required to use the DECwrite Equation Editor.

                    If you are installing this kit for use on a workstation, or on a
                    VAXcluster that includes workstations, then you should install
                    the entire kit. This requires 30,018 blocks.

                    If you are installing this kit on a workstation that will only run
                    DECwrite from a remote system, then only the video font files are
                    needed. This requires 1,043 blocks.

               * Do you want to install the entire kit [YES]? no
               * Do you want to install only the video fonts [YES]?

                    Installing only the DECwrite Equation Editor fonts...

               * Do you want to purge files replaced by this installation [YES]?

                   To complete the installation on a standalone VAX 11/780
                   will take approximately:

                       10 minutes to install

                   All required questions have been asked.
                   You can terminate the installation procedure at this time.

               * Do you want to continue the installation [YES]?

               %VMSINSTAL-I-RESTORE, Restoring product save set I ...
               %VMSINSTAL-I-RESTORE, Restoring product save set J ...

                    If you are installing this kit on a workstation, you should
                    restart DECwindows after the installation has completed:

                         @sys$startup:decw$startup restart

               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
                       Installation of DECWRITE V1.1 completed at 16:33

                       VMSINSTAL procedure done at 16:43
               $







               A-8  Printouts from Sample DECwrite Installations

 

















                                                                              B
               ________________________________________________________________

                                                                 DECwrite Files




                  This appendix lists the files that are modified or trans-
                  ferred to your system during a complete installation of
                  DECwrite for VMS systems. The files are organized by
                  directory.

                  Table B-1 lists all the DECwrite files installed or modified
                  by the DECwrite installation. Table B-2 lists all the
                  DECchart files installed or modified by the DECwrite
                  installation.

               Table B-1    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

               DECwrite Executable Images

                     sys$common:[sysexe]         decwrite.exe

                     sys$common:[sysexe]         write$equation.exe

               DECwrite Sharable Libraries

                     sys$common:[syslib]         decision$builder_shr.exe

                                                 write$ail_shr.exe

                                                 xdps$dpsclientshr.exe

                                                       (continued on next page)




                                                            DECwrite Files  B-1

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 xdps$dpslibshr.exe

               DECwrite Equation Editor 75 DPI Fonts

                     sys$common:[sysfont.decw.usedutch801_decmath_italic8.decw$font
                     75dpi]

                                                 dutch801_decmath_italic10.decw$font

                                                 dutch801_decmath_italic12.decw$font

                                                 dutch801_decmath_symbol8.decw$font

                                                 dutch801_decmath_symbol10.decw$font

                                                 dutch801_decmath_symbol12.decw$font

               DECwrite Equation Editor 100 DPI Fonts

                     sys$common:[sysfont.decw.usedutch801_decmath_extension12.decw$font
                     100dpi]

                                                 dutch801_decmath_italic8.decw$font

                                                 dutch801_decmath_italic10.decw$font

                                                 dutch801_decmath_italic12.decw$font

                                                 dutch801_decmath_symbol8.decw$font

                                                 dutch801_decmath_symbol10.decw$font

                                                 dutch801_decmath_symbol12.decw$font

               DECwrite Equation Editor Font Metrics Files

                                                       (continued on next page)






               B-2  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                     sys$common:[sysfont.ps_     dutch801_italic_decmath_
                     font_metrics.user]          italic.afm

                                                 dutch801_roman_decmath_
                                                 extension.afm

                                                 dutch801_roman_decmath_
                                                 symbol.afm

                                                 dutch801_italic_decmath_
                                                 italic.ps

                                                 dutch801_roman_decmath_
                                                 extension.ps

                                                 dutch801_roman_decmath_
                                                 symbol.ps

                                                 terminal_dectech.afm

                                                 terminal_dectech.ps

               DECwrite Style Files

                     sys$common:[cda$library]    wr_dir.doc_style

                                                 wr_examp.doc_style

                                                 wr_lettr.doc_style

                                                 wr_man.doc_style

                                                 wr_manb.doc_style

                                                 wr_memo.doc_style

                                                 wr_news.doc_style

                                                       (continued on next page)




                                                            DECwrite Files  B-3

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 wr_price.doc_style

                                                 wr_rpt.doc_style

                                                 wr_slidt.doc_style

                                                 wr_slidp.doc_style

                                                 wr_techj.doc_style

                                                 wr_milsp.doc_style

                                                 wr_slidl.doc_style

               DECwrite IVP Files

                     sys$common:[systest.decwritewrite$ivp.com

                                                 write$ident.com

                                                 writeivp.doc

                                                 feather.img

               Miscellaneous

                     sys$common:[syslib]         write$fonts.ini

                                                 write$prolog.ps

                     sys$common:[syshlp]         write$help.hlb

                     sys$common:[decw$defaults.uswrite$ui.uid

                                                 write$print_ui_dwv2.uid

                                                 write$equation.uid

                                                       (continued on next page)




               B-4  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 write$ipsdef.uid

                                                 write$iupdef.uid

                     sys$common:[sys$startup]    write$startup.com

               DECwrite Getting Started Documents and Demonstration Files

                     sys$common:[syshlp.examples.books.img

                                                 chart.img

                                                 clock.img

                                                 ruler.doc

                                                 decwrite011_release_
                                                 notes.decw$book

                                                 decwrite011_release_
                                                 notes.decw$bookshelf

                                                 decwrite-linespacing-grid.eps

                                                 docwindow.img

                                                 eps_clipart.doc

                                                 gray_draft.eps

                                                 keyboard_diagram.doc

                                                 keysyms.286

                                                 keysyms.386

                                                 logo.img

                                                       (continued on next page)




                                                            DECwrite Files  B-5

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 feather.img

                                                 stylefiles.img

                                                 graphics_examples.doc

                                                 *.eps

                                                 org-chart.doc

                                                 new-offices.doc

                                                 writedemo.doc

                                                 standard_deviation.tex

                                                 times_roman18.decw$font

                                                 times_roman18_100dpi.decw$font

                     sys$sysdevice:[clipart.eps]

                                                 APPLE.EPS

                                                 ATOM.EPS

                                                 BALLCAP.EPS

                                                 BALLONS.EPS

                                                 BASEBALL.EPS

                                                 BEAR.EPS

                                                 BELLS.EPS

                                                 BIGTRUCK.EPS

                                                       (continued on next page)




               B-6  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 BLUERIBB.EPS

                                                 BUTTERFL.EPS

                                                 CAKE.EPS

                                                 CANDLE.EPS

                                                 CAP_TASS.EPS

                                                 CARTOONM.EPS

                                                 CARTOONS.EPS

                                                 CASSETTE.EPS

                                                 CHRISTMA.EPS

                                                 CITYSKYL.EPS

                                                 COWBOYHA.EPS

                                                 DARTBOAR.EPS

                                                 EAGLE.EPS

                                                 EASTERBU.EPS

                                                 FEATHERP.EPS

                                                 FLOWER.EPS

                                                 FOOTBALL.EPS

                                                 GAVEL.EPS

                                                 GIFT.EPS

                                                       (continued on next page)




                                                            DECwrite Files  B-7

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 GLASSES.EPS

                                                 GROUGH-D.EPS

                                                 HAMBURGE.EPS

                                                 HANDSTOG.EPS

                                                 HEART_LA.EPS

                                                 HOURGLAS.EPS

                                                 HOUSE.EPS

                                                 ICECREAM.EPS

                                                 INTLBED.EPS

                                                 INTLGAS.EPS

                                                 INTLPLA.EPS

                                                 INTLRED.EPS

                                                 JET.EPS

                                                 KEY.EPS

                                                 KEYPAD.EPS

                                                 LIGHTBUL.EPS

                                                 LIGHTBUL.EPS

                                                 LIGHTNIN.EPS

                                                 LOBSTER.EPS

                                                       (continued on next page)




               B-8  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 LOCK.EPS

                                                 MICROPHO.EPS

                                                 MUSICB.EPS

                                                 NOSMOKIN.EPS

                                                 OLYMPICC.EPS

                                                 OPENBOOK.EPS

                                                 OWL.EPS

                                                 PARTYFAV.EPS

                                                 PENCIL.EPS

                                                 PENGUIN.EPS

                                                 POCKETWA.EPS

                                                 PUMPKIN.EPS

                                                 RAIN.EPS

                                                 ROSES.EPS

                                                 SCISSORS.EPS

                                                 SCRIPTLI.EPS

                                                 SCROLL.EPS

                                                 SHELLDES.EPS

                                                 STAROFDA.EPS

                                                       (continued on next page)




                                                            DECwrite Files  B-9

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 STAROUTL.EPS

                                                 SUNBURST.EPS

                                                 SUNGLASS.EPS

                                                 TELEPHON.EPS

                                                 TOYTRAIN.EPS

                                                 TROPHY.EPS

                                                 WHALE.EPS

                                                 WORLD.EPS

                                                 WREATH.EPS

                                                 WREATHLE.EPS

                     sys$sysdevice:[clipart.arrows]

                                                 ARR02.DOC

                                                 ARR03.DOC

                                                 ARR038.DOC

                                                 ARR10.DOC

                                                 ARR16.DOC

                                                 ARROWS.IMG

                                                 BOLDDWN2.IMG

                                                 BOLDDOWN.IMG

                                                       (continued on next page)




               B-10  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 TIPS.IMG

                                                 BIG_DOWN.IMG

                                                 BIG_UP.IMG

                                                 SELF.IMG

                                                 DOWN.IMG

                                                 RIGHT.IMG

                                                 WINDOW.IMG

                     sys$sysdevice:[clipart.building]

                                                 ARC02.DOC

                                                 ARC034.DOC

                                                 ARC04.DOC

                                                 ARC040.DOC

                                                 ARC048.DOC

                                                 ARC060.DOC

                                                 ARC08.DOC

                                                 ARC09.DOC

                                                 ARC11.DOC

                                                 ARC12.DOC

                                                 ARC18.DOC

                                                       (continued on next page)




                                                           DECwrite Files  B-11

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 ARC25.DOC

                                                 ARC49.DOC

                                                 BICYCLE.DOC

                                                 TRUCK.IMG

                                                 SKYLINE.IMG

                                                 DOM27.DOC

                                                 DOM40.DOC

                                                 EQU01.DOC

                                                 EQU02.DOC

                                                 EQU03.DOC

                                                 EQU04.DOC

                                                 EQU05.DOC

                                                 EQU08.DOC

                                                 EQU10.DOC

                                                 FIG48.DOC

                                                 BUILDING.IMG

                                                 TRA01.DOC

                                                 TRA02.DOC

                                                 TRA05.DOC

                                                       (continued on next page)




               B-12  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 TRA07.DOC

                                                 TRA09.DOC

                                                 TRA40.DOC

                     sys$sysdevice:[clipart.communic]

                                                 COM06.DOC

                                                 COM20.DOC

                                                 PHONE.IMG

                                                 PHONE2.IMG

                                                 HANDSET.IMG

                     sys$sysdevice:[clipart.energy]

                                                 DOM003.DOC

                                                 DOM27.DOC

                                                 ENV03.DOC

                                                 ENV07.DOC

                                                 ENV09.DOC

                                                 ENV11.DOC

                     sys$sysdevice:[clipart.sports]

                                                 49ER.IMG

                                                 BASEBALL.IMG

                                                       (continued on next page)




                                                           DECwrite Files  B-13

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 CUP.IMG

                                                 FOOTBALL.IMG

                                                 NFL_LOGO.IMG

                                                 OLYMPIC_LOGO.IMG

                                                 SPO06.DOC

                                                 SPO15.DOC

                                                 SPO16.DOC

                                                 SPO20.DOC

                                                 SPO33.DOC

                                                 SPO34.DOC

                     sys$sysdevice:[clipart.figures]

                                                 ANA013.DOC

                                                 ANA03.DOC

                                                 ANA04.DOC

                                                 ANA17.DOC

                                                 ANA19.DOC

                                                 ANA22.DOC

                                                 ANA23.DOC

                                                 ANA24.DOC

                                                       (continued on next page)




               B-14  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 NO_SIGN.IMG

                                                 LAUGHING.IMG

                                                 TALKING.IMG

                                                 RUNNING.IMG

                                                 COMPASS.IMG

                                                 CTN01.DOC

                                                 CTN149.DOC

                                                 CTN19.DOC

                                                 CTN23.DOC

                                                 CTN72.DOC

                                                 CTN77.DOC

                                                 CTN86.DOC

                                                 CTN89.DOC

                                                 DANCER.IMG

                                                 DOM003.DOC

                                                 DOM32.DOC

                                                 DOM44.DOC

                                                 EMERGNCY.IMG

                                                 FIG034.DOC

                                                       (continued on next page)




                                                           DECwrite Files  B-15

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 FIG04.DOC

                                                 FIG045.DOC

                                                 FIG047.DOC

                                                 FIG059.DOC

                                                 FIG060.DOC

                                                 FIG099.DOC

                                                 FIG109.DOC

                                                 FIG117.DOC

                                                 FIG128.DOC

                                                 FIG133.DOC

                                                 FIG143.DOC

                                                 FIG144.DOC

                                                 FIG178.DOC

                                                 FIG179.DOC

                                                 FIG185.DOC

                                                 FIG48.DOC

                                                 FIG49.DOC

                                                 FIG49.DOC

                                                 FIG78.DOC

                                                       (continued on next page)




               B-16  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 FIG79.DOC

                                                 FIG81.DOC

                                                 HAND_KEY.IMG

                                                 MIS005.DOC

                                                 MIS03.DOC

                                                 MIS16.DOC

                                                 MEETING.IMG

                                                 CROWD.IMG

                                                 AUDIENCE.IMG

                                                 QUILL.IMG

                                                 BRAIN.IMG

                                                 STAR_5PT.IMG

                                                 CLUSTER.IMG

                                                 STOPSIGN.IMG

                                                 SUNBURST.IMG

                                                 SUNSET.IMG

                                                 WOMAN1.IMG

                                                 WOMAN2.IMG

                                                 WORKGRP2.IMG

                                                       (continued on next page)




                                                           DECwrite Files  B-17

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 YIELD.IMG

                                                 YODA.IMG

                     sys$sysdevice:[clipart.finance]

                                                 AGENDA.IMG

                                                 BUS01.DOC

                                                 BUS10.DOC

                                                 BUS24.DOC

                                                 BUS33.DOC

                                                 BUS41.DOC

                                                 DOLLAR.IMG

                                                 DOLLAR1.IMG

                                                 DOM009.DOC

                                                 DOM011.DOC

                                                 DOM034.DOC

                                                 DOM10.DOC

                                                 DOM27.DOC

                                                 DOM32.DOC

                                                 DOM44.DOC

                                                 EMERGNCY.IMG

                                                       (continued on next page)




               B-18  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 ENVELOPE.IMG

                                                 FIG034.DOC

                                                 FIG045.DOC

                                                 FIN05.DOC

                                                 FIN10.DOC

                                                 FIN15.DOC

                                                 FIN16.DOC

                                                 MIS001.DOC

                                                 MIS002.DOC

                                                 1DOLLAR.IMG

                                                 SALESIGN.IMG

                                                 SCALES.IMG

                     sys$sysdevice:[clipart.governmt]

                                                 US_FLAG.IMG

                                                 ARC040.DOC

                                                 ARC09.DOC

                                                 GOVTBLDG.IMG

                                                 DOM27.DOC

                                                 GOV03.DOC

                                                       (continued on next page)




                                                           DECwrite Files  B-19

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 GOV09.DOC

                                                 GOV10.DOC

                                                 MAP101.DOC

                                                 MAP102.DOC

                                                 MAP103.DOC

                                                 MAP104.DOC

                                                 MAP108.DOC

                                                 MAP109.DOC

                                                 MAP110.DOC

                                                 MAP111.DOC

                                                 MAP118.DOC

                                                 MAP204.DOC

                                                 MAP212.DOC

                                                 MAP218.DOC

                                                 MAP304.DOC

                                                 MAP305.DOC

                                                 MAP306.DOC

                                                 MAP317.DOC

                                                 MAP407.DOC

                                                       (continued on next page)




               B-20  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 MAP411.DOC

                                                 MAP501.DOC

                                                 MAP503.DOC

                                                 MAP506.DOC

                                                 MAP511.DOC

                                                 MAP516.DOC

                                                 MAP601.DOC

                                                 MAP608.DOC

                                                 MIS010.DOC

                                                 SIVALLEY.IMG

                                                 WASHNGTN.IMG

                     sys$sysdevice:[clipart.science]

                                                 DOM034.DOC

                                                 DOM27.DOC

                                                 DOM44.DOC

                                                 EDU08.DOC

                                                 EDU11.DOC

                                                 EDU12.DOC

                                                 EDU21.DOC

                                                       (continued on next page)




                                                           DECwrite Files  B-21

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 FIG047.DOC

                                                 FIG179.DOC

                                                 SCI004.DOC

                                                 SCI007.DOC

                                                 SCI024.DOC

                                                 SCI05.DOC

                                                 SCI09.DOC

               Equation Editor BDF Files

                     sys$common:[syshlp.examples.decwrite.equation_ font_
                     bdf.100dpi]*.bdf

                     sys$common:[syshlp.examples.decwrite.equation_ font_
                     bdf.75dpi]*.bdf

               Hyphenation Databases

                     sys$common:[syslib]         write$dnhyp01.ram

                                                 write$duhyp01.ram

                                                 write$encd01e.dsk

                                                 write$encd01g.ram

                                                 write$fnhyp01.ram

                                                 write$grhyp01.ram

                                                 write$hyp01.ram

                                                       (continued on next page)




               B-22  DECwrite Files

 











               Table B-1 (Cont.)    DECwrite Files

               ________________________________________________________________
               Description_Directory_____________File_Name_____________________

                                                 write$ithyp01.ram

                                                 write$nbhyp01.ram

                                                 write$pohyp01.ram

                                                 write$sphyp01.ram

                                                 write$swhyp01.ram

                                                 write$ua2005l.dsk

                                                 write$ua2005l.ram

               Thesaurus Database

                     sys$common:[syslib]         write$thesaurus.dsk

               FileView Customization Files

                     sys$common:[vue$library.userwrite$vue.com

                                                 write$vue_profile.vue$dat

               International Lexicon/American English Files

                     lci$lexicons:               am2878kh.dsk

                                                 am2878kh.ram

                                                 lae.scp

                     sys$common:[sys$startup]    lci$startup.com

               ______sys$common:[sys$test]_______lae$ivp.com___________________








                                                           DECwrite Files  B-23

 











               Table B-2    DECchart Files

               ________________________________________________________________
               Files Installed or Modified by DECchart
               Description_Directory_____________File_Name_____________________

               DECchart IVP Files

                     sys$sysroot:[SYSTEST]       chart$ivp.com

                     sys$sysroot:[SYSTEST.CHART$Ichart$ident.com

               File Used to Start DECchart From VUE

                     sys$sysroot:[VUE$LIBRARY.USEchart$vue.com

               DECchart Executable Image

                     sys$sysroot:[SYSEXE]        decchart.exe

               DECchart Help Library File

                     sys$sysroot:[SYSHLP]        chart$help.hlb

               DECchart User Interface Description File

                     sys$sysroot:[decw$defaults.uchart$uid.uid

               DECchart Sample Files

                     sys$sysroot:[syshlp.exampleschart$sample.table

                                                 chart$sample.chart

                                                 chart$sample.chart_style

               DECchart Style Files

                     sys$sysroot:[cda$library]   ch_area100.chart_style

                                                 ch_areagrid.chart_style

                                                 ch_areasimple.chart_style

                                                       (continued on next page)



               B-24  DECwrite Files

 











               Table B-2 (Cont.)    DECchart Files

               ________________________________________________________________
               Files Installed or Modified by DECchart
               Description_Directory_____________File_Name_____________________

                                                 ch_area_col.chart_style

                                                 ch_bar100.chart_style

                                                 ch_barcluster.chart_style

                                                 ch_barclustergrid.chart_style

                                                 ch_barclustervalue.chart_style

                                                 ch_baroverlap.chart_style

                                                 ch_barstack.chart_style

                                                 ch_col100.chart_style

                                                 ch_colcluster.chart_style

                                                 ch_colclustergrid.chart_style

                                                 ch_colclustervalue.chart_style

                                                 ch_coloverlap.chart_style

                                                 ch_colstack.chart_style

                                                 ch_col_hilo.chart_style

                                                 ch_col_line.chart_style

                                                 ch_col_scat.chart_style

                                                 ch_hilo.chart_style

                                                 ch_hiloclose.chart_style

                                                       (continued on next page)





                                                           DECwrite Files  B-25

 











               Table B-2 (Cont.)    DECchart Files

               ________________________________________________________________
               Files Installed or Modified by DECchart
               Description_Directory_____________File_Name_____________________

                                                 ch_hiloopcl.chart_style

                                                 ch_hiloopen.chart_style

                                                 ch_hilo_line.chart_style

                                                 ch_histo.chart_style

                                                 ch_histohgrid.chart_style

                                                 ch_histohvgrid.chart_style

                                                 ch_histovalue.chart_style

                                                 ch_line.chart_style

                                                 ch_linehgrid.chart_style

                                                 ch_linehvgrid.chart_style

                                                 ch_linelog.chart_style

                                                 ch_linemarkers.chart_style

                                                 ch_line_line.chart_style

                                                 ch_line_scat.chart_style

                                                 ch_pie.chart_style

                                                 ch_pieallexp.chart_style

                                                 ch_pieoneexp.chart_style

                                                 ch_pievalue.chart_style

                                                       (continued on next page)





               B-26  DECwrite Files

 











               Table B-2 (Cont.)    DECchart Files

               ________________________________________________________________
               Files Installed or Modified by DECchart
               Description_Directory_____________File_Name_____________________

                                                 ch_scatter.chart_style

                                                 ch_scatterdeplog.chart_style

                                                 ch_scatterhvgrid.chart_style

                                                 ch_scatterlines.chart_style

                                                 ch_scatterxylog.chart_style

               CDA Converter Files

                     sys$library:                doc$read_dx.exe

                                                 doc$write_dx.exe

                                                 dtif$read_ascii_tabular.exe

                                                 dtif$write_ascii_tabular.exe

                                                 dtif$read_calcgrd.exe

                                                 dtif$read_dif.exe

                                                 dtif$read_wk1.exe

                                                 dtif$write_wk1.exe

                     cda$library:                dx_guide.doc_style

                                                 dx_cour.doc_style

                                                 dx_helv.doc_style

               __________________________________dx_times.doc_style____________







                                                           DECwrite Files  B-27

 




















               ___________________________________________________________


                                                                      Index



               B                               DECwrite Font Utility

               Backing up the system disk,       See Font Utility, 5-1
                  2-9                          DECwrite Font Utilty, 5-1
               Beginning the installation,     DECwrite startup file
                  3-2                            editing, 4-4
                                                 WRITE$STARTUP.COM, 4-4
               C                               Disk blocks

                                                 displaying number of free
               Checking the distribution           disk blocks, 2-6
                  kit, 2-1                     Distribution kit
               Clip art, 4-4                     contents of, 2-1
               Cluster                           list of files on, B-1
                 installing DECwrite, 2-5      E
               Commands
                 Font Utility, 5-2             Examples

               D                                 WRITE$CLIPART directory,

                                                   4-4
               DECwrite                          WRITE$EXAMPLES directory,
                 running from DCL, 4-9             4-4
                 running from FileView,
                    4-9

                                                                    Index-1

 






          F                               L

          Files                           Labels
            clip art, B-6                   on distribution media,
            created or modified               2-2
               during VMS installation    Language
               , B-1                        parameter, 4-4
            on DECwrite distribution        variant, 4-4
               kit, B-1                   Libraries, shared, 4-4
          Font mapping, 5-1               License registration, 2-4
          Font Utility, 5-1               M
            commands, 5-2
            descriptions, 5-2             Media labels, 2-2
            font mapping, 5-1             P
            preparing to run, 5-1
            startup, 5-2                  Parameter
          Free disk blocks                  language, 4-4
            displaying number of, 2-6     Preparing for installation,

          G                                  2-1
                                          Prerequisite software for
          Global pages, 2-5                  DECwrite installation,
          Global sections, 2-5               2-2

          I                               R

          Images, shared, 4-4             Running DECwrite, 4-9
          Installation                    S
            sample printout, A-1
          Installation on a               Sample document, 4-9
             standalone system, 4-4       Sample installation
          Installation on a                  printout, A-1
             VAXcluster, 4-5              SHOW DEVICE command
          Installation Verification         displaying number of free
             Procedure                        disk blocks, 2-6
            running after                 Software
               installation, 4-8



          Index-2

 






          Software (Cont.)                V

            required before
               installing DECwrite,       VAXcluster
               2-2                          installation on, 4-5
          Standalone system                 installing DECwrite, 2-5
            installation on, 4-4          VMSINSTAL
          Starting the installation,        command line, 3-2
             3-2                            starting the installation
          System disk                         , 3-2

            backing up, 2-9               W
          System startup file
            editing, 4-1                  WRITE$STARTUP.COM, 4-4


























                                                              Index-3
