 






          DIGITAL

          Read Before Installing or Using ALL-IN-1 MAIL for VMS Version
          1.0

          AV-PCX9A-TE

          ALL-IN-1 MAIL for VMS is an electronic messaging application
          that conforms to the international messaging standards set by
          the CCITT X.400 recommendations. This means ALL-IN-1 MAIL allows
          you to communicate with other computer users, even when your
          computer systems are made by different manufacturers or are
          otherwise incompatible, and even when your computer systems are
          installed in different countries.

          Please take time to read the following information about ALL-IN-
          1 MAIL for VMS.

          Installation Information

          ALL-IN-1 MAIL Version 1.0 requires VMS Version 5.2.

          Installing the ALL-IN-1 MAIL for VMS Wide Area Network Kit  The
          following information is important if you are installing the
          ALL-IN-1 MAIL for VMS Wide Area Network kit:

          The ALLIN1-MAIL-WAN-SERVER license provides you with the li-
          censes for VMS Message Router, the VMS Message Router VMSmail
          Gateway, and the VMS Message Router X.400 Gateway. If you have
          registered the ALLIN1-MAIL-WAN-SERVER license, the ALL-IN-1 MAIL
          for VMS installation will register these other three licenses
          automatically. These licenses must be loaded before the MAILbus
          products can be installed and configured. In addition, Message
          Router must be installed and configured before you can install
          ALL-IN-1 MAIL for VMS. Installing the ALL-IN-1 MAIL for VMS Wide
          Area Network kit is, therefore, a multi-step process that in-
          volves two passes through the ALL-IN-1 MAIL for VMS installation
          process:

          o  Register the ALLIN1-MAIL-WAN-SERVER license included in your
             kit.

 






          o  Use VMSINSTAL to install ALL-IN-1 MAIL for VMS the first
             time, loading the other licenses automatically. This instal-
             lation is much simpler than the installation described in the
             ALL-IN-1 MAIL for VMS Installation Guide. It does not require
             you to answer any questions; it simply loads the licenses and
             exits. The following sample ALLIN1-MAIL-WAN-SERVER Installa-
             tion illustrates what you will see during this preliminary
             installation:

             ©Digital Equipment Corporation. 1990. All rights reserved.





























                                          2

 






          Example 1:  A Sample ALLIN1-MAIL-WAN-SERVER Installation

          The following products will be processed:

            A1MAIL V1.0

           Beginning installation of A1MAIL V1.0 at 17:54

          %VMSINSTAL-I-RESTORE, Restoring product save set A ...
          %VMSINSTAL-I-RELMOVED, The product's release notes have been
                          successfully moved to SYS$HELP.

              +------------------------------------------+
              |  Installing ALL-IN-1 MAIL for VMS V1.0   |
              |           X.400 MAIL product             |
              +------------------------------------------+

          %LICENSE-I-LOADED, DEC MESSAGE-ROUTER was successfully
                 loaded with 0 units
          %LICENSE-I-LOADED, DEC MR-VMSMAIL-GATEWAY was successfully
                 loaded with 0 units
          %LICENSE-I-LOADED, DEC MESSAGE-ROUTER-X.400 was successfully
                 loaded with 0 units

              The licenses associated with the ALL-IN-1 MAIL Wide Area
           Network license
              have all been successfully loaded.

              This installation will now exit.

              Please install and configure Message Router before
           reinvoking this
              installation procedure to install the ALL-IN-1 MAIL product.

          %VMSINSTAL-I-MOVEFILES, Files will now be moved to their
               target directories...

           Installation of A1MAIL V1.0 completed at 17:55

           VMSINSTAL procedure done at 17:55

                                          3

 






          Continuing with the ALL-IN-1 MAIL for VMS installation process:

          o  Install Message Router, MRGATE, and the Message Router X.400
             Gateway.

          o  Configure and start up Message Router.

          o  The system is now ready to install ALL-IN-1 MAIL for VMS as
             described in the ALL-IN-1 MAIL for VMS Installation Guide.

          Informational Message  The following informational message was
          inadvertently left out of the ALL-IN-1 MAIL for VMS Installation
          Guide. It is displayed after the installer inputs the UIC for
          the MUAS$SERVER account:

          In order to ensure that the ALL-IN-1 MAIL server runs in the
          proper environment, this installation procedure will create
          an account for the server. This account, MUAS$SERVER, has no
          special privileges and it is not possible to log into this
          account.

          You must specify a unique UIC that is not a system UIC for this
          account in order to ensure proper security of the network.
          The password for this account will be generated. You do not
          need to know this password. It has been set as PRE-EXPIRED. If
          this scenerio violates your security policies, you may change
          it after the installation has finished via the VMS AUTHORIZE
          utility.

          Release Notes Information

          The release notes for ALL-IN-1 MAIL Version 1.0 contain impor-
          tant installation-related instructions and a summary of tech-
          nical changes, new features, differences, known problems, cor-
          rected errors, performance enhancements, documentation errors,
          restrictions, and incompatibilities.

          The release notes for ALL-IN-1 MAIL can be found in A1MAIL010.RELEASE_
          NOTES in SYS$HELP.

                                          4

 






          Contents of This Kit

          The ALL-IN-1 MAIL kit contains:

          o  Indented Bill Report (BIL) and Bill of Materials (BOM)

             Please read the BIL and BOM enclosed in this kit and check to
             see that all items listed are actually in your kit. If your
             kit is damaged or any items are missing, call your Digital
             representative.

          o  Media

             If you ordered media, you will find the media and the ALL-
             IN-1 MAIL for VMS Installation Guide in this kit. Consult
             the ALL-IN-1 MAIL for VMS Installation Guide for information
             about installing ALL-IN-1 MAIL on your system.

          o  Documentation

             Depending on your order, this kit may include copies of the
             following ALL-IN-1 MAIL documentation:

             o  The ALL-IN-1 MAIL System Manager's Guide
                This guide provides all information needed by the ALL-IN-1
                MAIL system manager, including how to add and maintain
                users to the ALL-IN-1 MAIL system, how to reconfigure
                MUAS, and how to interrogate the Message Router queues.

             o  The ALL-IN-1 MAIL for VMS Installation Guide
                This guide is included with the media.

             o  Software Product Description (SPD)
                The SPD provides an overview of the ALL-IN-1 MAIL kit and
                its features.

             o  System Support Addendum (SSA)
                The SSA describes the technical environment in which the
                product is supported.

             o  Software Performance Report (SPR)
                The SPR is provided for you to report any problems with
                ALL-IN-1 MAIL, if you have purchased warranty services.

                                          5

 






             o  Software Update Survey Card
                This card is provided for you to provide valuable feedback
                to Digital on the quality of our installation. By complet-
                ing this card after you install ALL-IN-1 MAIL, you help us
                understand our customers' needs and improve our products.

          A Final Note

          Digital prides itself on responding to customer needs. In order
          to continue serving you, we need your comments. Each manual
          contains preaddressed, postage-paid Reader's Comments forms
          at the back. If you find errors in a manual or want to make
          comments about it, please fill out one of these forms and send
          it to us.

























                                          6
