                         H                     ____________________________________________________6                     COM for OpenVMS Installation Guide    !                     February 2002     I                     This document contains instructions on installing COM 2                     Version 1.2 for OpenVMS Alpha.              ?                     Revision/Update Information:  This document H                                                   supersedes the COM forF                                                   OpenVMS InstallationG                                                   Guide, Version 1.1-B.   E                     Software Version:             COM Version 1.2 for 9                                                   OpenVMS   G                     Operating System:             OpenVMS Alpha Version A                                                   7.2-1 or higher F                                                   Microsoft Windows NTC                                                   4.0 SP5 or higher                   /                     Compaq Computer Corporation "                     Houston, Texas                 N               ________________________________________________________________               February 2002   ;                Compaq Information Technologies Group, L.P.   ?               Compaq, the Compaq logo, and the DIGITAL logo are A               registered in the U.S. Patent and Trademark Office. D               BETTER ANSWERS is a service mark of Compaq InformationH               Technologies Group, L.P. in the United States and/or otherE               countries. All other product names mentioned herein may H               be trademarks or registered trademarks of their respective               companies.  G               Confidential computer software. Valid license from Compaq E               Computer Corporation or authorized sublicensor required H               for possession, use or copying. Consistent with FAR 12.211I               and 12.212, Commercial Computer Software, Computer Software H               Documentation, and Technical Data for Commercial Items areE               licensed to the U.S. Government under vendor's standard !               commercial license.   A               Compaq Computer Corporation shall not be liable for B               technical or editorial errors or omissions containedD               herein. The information in this document is subject to$               change without notice.  F               Alpha, AlphaServer, AlphaStation, DEC, DIGITAL, OpenVMS,C               POLYCENTER, Tru64, VAX, VMS, are trademarks of Compaq #               Computer Corporation.   I               ActiveX, Microsoft, MS, MS-DOS, Win32, Windows, and Windows C               NT are registered trademarks, and NT, Windows 95, and A               Windows 98 are trademarks of Microsoft Corporation.   F               Adobe, Display POSTSCRIPT, and POSTSCRIPT are registered7               trademarks of Adobe Systems Incorporated.   G               Apple, Mac, Macintosh, and Power Macintosh are registered 0               trademarks of Apple Computer, Inc.  F               AT&T is a registered trademark of the American Telephone$               and Telegraph Company.  B               Motif, OSF/1, UNIX and the "X" device are registeredE               trademarks, and IT DialTone, X/Open, and The Open Group E               are trademarks, of The Open Group in the U.S. and other                countries.  @               Unicode is a registered trademark of Unicode, Inc.  E               Wind/U is a registered trademark of Bristol Technology,                Inc.  H               Other product names mentioned herein may be the trademarks,               of their respective companies.  D               This product includes software licensed from Microsoft               Corporation.F               Copyright  Microsoft Corporation, 1991-1998. All rights               reserved.   B               This product includes software licensed from Bristol               Technology, Inc.H               Copyright  Bristol Technology, Inc, 1990-1998. All rights               reserved.   I                                                                         -   F               The Compaq OpenVMS documentation set is available on CD-               ROM.  I                                                   17-JAN-2002 16:49:36.66                                  F      _________________________________________________________________  F                                                               Contents      F      Preface...................................................      v  *      1  Installing the COM for OpenVMS Kit  <            1.1   Contents of the COM Version 1.2 for OpenVMSF                  Kit...........................................    1-1F            1.2   Prerequisites.................................    1-1=            1.2.1     DECwindows Motif Required to Run COM for F                      OpenVMS...................................    1-3F            1.3   Supported COM for OpenVMS Installations.......    1-39            1.4   Installing COM for OpenVMS on an OpenVMS F                  Standalone System.............................    1-48            1.5   Upgrading COM for OpenVMS on an OpenVMSF                  Standalone System.............................    1-69            1.6   Installing COM for OpenVMS on an OpenVMS F                  Cluster.......................................    1-98            1.7   Upgrading COM for OpenVMS in an OpenVMSF                  Cluster.......................................   1-122            1.8   Understanding the COM for OpenVMSF                  Environment...................................   1-15<            1.8.1     COM for OpenVMS Service Control ManagerF                      (SCM).....................................   1-16F            1.8.2     OpenVMS Registry Server...................   1-177            1.8.3     Compaq Advanced Server for OpenVMS F                      Server....................................   1-17F            1.8.4     ACME Server...............................   1-18F            1.8.5     RPC Endpoint Mapper.......................   1-18F            1.8.6     RPC and SSPI/NTLM Layers..................   1-19F            1.8.7     OpenVMS Events............................   1-19F            1.9   Installing COM for OpenVMS....................   1-19F            1.10  COM for OpenVMS Postinstallation Procedures...   1-22:            1.11  Starting COM for OpenVMS (COM for OpenVMSF                  Service Control Manager)......................   1-23  F                                                                    iii                   >               1.11.1    Starting COM for OpenVMS AutomaticallyI                         after a Reboot............................   1-24 B               1.12  Shutting Down COM for OpenVMS (COM for OpenVMSI                     Service Control Manager)......................   1-24 B               1.12.1    Suppressing the DCOM$SHUTDOWN ConfirmationI                         Request...................................   1-26   
         Index              Examples  I               1-1       Sample COM for OpenVMS Installation.......   1-21            Tables  I               1-1       Process Name to Server Name Mapping.......   1-16                                                         
         iv                             I         _________________________________________________________________   I                                                                   Preface                Related Documents   F               For additional information about Compaq OpenVMS productsF               and services, access the Compaq website at the following               location:   ,               http://www.openvms.compaq.com/           Reader's Comments   G               Compaq welcomes your comments on this manual. Please send <               comments to either of the following addresses:  /               Internet    openvmsdoc@compaq.com   5               Mail        Compaq Computer Corporation_>                           OSSG Documentation Group, ZKO3-4/U08,                           110 Spit Brook Rd./                           Nashua, NH 03062-2698d  -         How to Order Additional Documentation   H               Visit the following World Wide Web address for information:               about how to order additional documentation:  ,               http://www.openvms.compaq.com/  F               If you need help deciding which documentation best meets,               your needs, call 800-282-6672.          I                                                                         vn                         I                                                                         1 I         _________________________________________________________________   I                                        Installing the COM for OpenVMS Kit     E               This chapter provides a list of the contents of the COM C               for OpenVMS kit, a list of prerequisite software, and D               preinstallation requirements. It also describes how toC               install COM for OpenVMS and includes postinstallation_               instructions._  ;         1.1 Contents of the COM Version 1.2 for OpenVMS Kitp  A               COM Version 1.2 for OpenVMS contains the following:                  o  Softwarel  6                  -  COM for OpenVMS run-time libraries  B                  -  COM for OpenVMS MIDL compiler and header files  ;                  -  COM for OpenVMS configuration utilitiesh  7                  -  Active Template Library Version 3.0o  '                  -  Sample applications                  o  Documentation  H                  -  OpenVMS Connectivity Developer Guide (in PostScript,*                     HTML, and PDF formats)           1.2 Prerequisites   1               The following software is required:q  $               o  For OpenVMS systems  3                  -  OpenVMS Version 7.2-1 or higher   @                  -  For COM for OpenVMS application development:4                     Compaq C++ Version 6.0 or higher  9                     To build ATL applications on OpenVMS:n8                     Compaq C++ Version 6.2-016 or higher  I                                    Installing the COM for OpenVMS Kit 1-1            *         Installing the COM for OpenVMS Kit         1.2 Prerequisitesh    E                  -  Compaq TCP/IP Services for OpenVMS Version 5.0 orn                     equivalent  <                  -  Compaq DECwindows Motif for OpenVMS (see"                     Section 1.2.1)  E                  -  Compaq Advanced Server for OpenVMS Version 7.3 or                      higher  G                     (Compaq Advanced Server for OpenVMS is not requiredsI                     if you are running COM for OpenVMS in unauthenticatedo                     mode.)  I                  -  Before installing COM for OpenVMS check that you have D                     the required free global pages, global sections,B                     and disk blocks. The following table lists the!                     requirements.   I                     _____________________________________________________ 7                                      Global      GlobalFI                     Software_________pages_______sections____Disk_blocks_T  B                     COM for OpenVMS  11,000      27          57000  I                     RPC_Runtime______3,300_______14__________N/A_________   G                        For Advanced Server requirements: See the CompaqiF                        Advanced Server for OpenVMS Server Installation/                        and Configuration Guide. >                        For TCP/IP requirements: See the CompaqC                        TCP/IP Services for OpenVMS Installation andr.                        Configuration document.  '               o  For Windows NT systems1  @                  -  Windows NT 4.0 with Service Pack 3 or higher                     installedn  E                  -  Microsoft Visual C++ or Visual Basic (for Windows D                     NT client development and information about MIDLE                     compiler). See the Microsoft website for compiler )                     version requirements.V  D                  -  TCP/IP enabled (needed for OpenVMS connectivity)  .         1-2 Installing the COM for OpenVMS Kit    4      I                                        Installing the COM for OpenVMS Kit_I                                                         1.2 Prerequisites     >         1.2.1 DECwindows Motif Required to Run COM for OpenVMS  B               You must install DECwindows Motif for OpenVMS on anyA               system running COM for OpenVMS. If you already have1H               DECwindows Motif installed on your system, you do not needF               to do anything else. If you do not have DECwindows MotifE               installed on your system, you can find the installation C               kit for DECwindows Motif on the OpenVMS CD-ROM in the H               [KITS.DWMOTIFxxx_KIT] directory, where xxx is a DECwindows0               Motif version, such as 125 or 126.  F                 ________________________ Note ________________________  B                 If you are installing DECwindows Motif to meet theF                 COM for OpenVMS requirements only, you do not need the!                 DW-MOTIF license.o  F                 ______________________________________________________  3         1.3 Supported COM for OpenVMS Installationsf  I               The following sections describe COM Version 1.2 for OpenVMS./               installation and upgrade options.g  F                 ________________________ Note ________________________  A                 If you want to run COM Version 1.2 for OpenVMS inrC                 unauthenticated mode, see Appendix E in the OpenVMS.-                 Connectivity Developer Guide.s  F                 ______________________________________________________                            I                                    Installing the COM for OpenVMS Kit 1-3  8         *         Installing the COM for OpenVMS Kit3         1.3 Supported COM for OpenVMS Installations.      I               ___________________________________________________________.I               If_you_want_to_do_this__________Read_this_section__________   9               Install COM for OpenVMS on an   Section 1.4.+               OpenVMS standalone system fore               the first time.s  9               Install COM for OpenVMS on an   Section 1.6r,               OpenVMS Cluster system for the               first time.   9               Upgrade from earlier versions   Section 1.5 &               of COM for OpenVMS on an(               OpenVMS standalone system.  9               Upgrade from earlier versions   Section 1.7t&               of COM for OpenVMS on anI               OpenVMS_Cluster_system.____________________________________   F         1.4 Installing COM for OpenVMS on an OpenVMS Standalone System  *               Use the following procedure:  B               1. Install OpenVMS Version 7.2-1 or higher. For thisE                  procedure, see the OpenVMS Alpha Version 7.x Upgrade )                  and Installation Manual.l  A               2. Install TCP/IP Services. For this procedure, seecD                  the Compaq TCP/IP Services for OpenVMS InstallationC                  and Configuration manual or your TCP/IP supplier's                   documentation._  @               3. Boot the installed system from the system disk.  I               4. Install COM Version 1.2 for OpenVMS. For this procedure,a!                  see Section 1.9.   E               5. Install Compaq Advanced Server for OpenVMS. For thiseF                  procedure, see the Compaq Advanced Server for OpenVMS=                  Server Installation and Configuration Guide.   B               6. Configure TCP/IP Services (set up for startup andC                  reboot); then start TCP/IP. You must configure thelF                  PWIP driver for Compaq Advanced Server for OpenVMS toG                  use TCP/IP Services. For information about configuring C                  TCP/IP, see the Compaq TCP/IP Services for OpenVMS   .         1-4 Installing the COM for OpenVMS Kit a  H      I                                        Installing the COM for OpenVMS KitiI            1.4 Installing COM for OpenVMS on an OpenVMS Standalone Systemu    F                  Installation and Configuration  manual or your TCP/IP*                  supplier's documentation.  ;               7. Configure the OpenVMS Registry as follows:n  I                  o  Run REG$CONFIG.COM to configure the OpenVMS Registry. @                     See Section 11.2 in the OpenVMS Connectivity$                     Developer Guide.  >                  o  Edit the SYLOGICALS.COM file to define the4                     SYS$REGISTRY logical as follows:  H                     $ DEFINE/SYSTEM SYS$REGISTRY directory-specification  F               8. Start OpenVMS Registry by running the REG$STARTUP.COM                  file.  7               9. If you want to run DCE, start DCE now.s  F                 ________________________ Note ________________________  B                 You do not need DCE to run COM for OpenVMS, but ifE                 your environment uses DCE, Compaq recommends that you                  start DCE now.  F                 ______________________________________________________  H                  For this procedure, see the Compaq DCE Installation and%                  Configuration Guide.l  <                  For more information about OpenVMS external?                  authentication, see Section 5.1 in the OpenVMS .                  Connectivity Developer Guide.  G              10. Configure Compaq Advanced Server for OpenVMS. You needlG                  to reboot to finish Compaq Advanced Server for OpenVMS G                  configuration. You must reboot 0 to n times, dependinguB                  on your system configuration. For this procedure,B                  see the Compaq Advanced Server for OpenVMS Server6                  Installation and Configuration Guide.  E              11. Start Compaq Advanced Server for OpenVMS (set up foriG                  startup on reboot). For this procedure, see the CompaqiD                  Advanced Server for OpenVMS Server Installation and%                  Configuration Guide.t  B              12. Start the ACME server. Use the following command:  5                    $ @SYS$STARTUP:NTA$STARTUP_NT_ACME5  I                                    Installing the COM for OpenVMS Kit 1-5w o         *         Installing the COM for OpenVMS KitF         1.4 Installing COM for OpenVMS on an OpenVMS Standalone System    6              13. Start RPC. Use the following command:  5                    $ @SYS$STARTUP:DCE$RPC_STARTUP.COM   C              14. Configure COM for OpenVMS. For this procedure, see I                  Section 1.10 and Section 6.2 in the OpenVMS Connectivityn!                  Developer Guide.   F                  o  Populate the OpenVMS Registry. For this procedure,I                     see Section 6.2 in the OpenVMS Connectivity DevelopereH                     Guide. Use option 3 to populate the OpenVMS Registry                     database.   E                  o  Create any OpenVMS and Compaq Advanced Server for_B                     OpenVMS accounts needed by the COM for OpenVMSF                     Service Control Manager. For more information, seeE                     Section 6.2 in the OpenVMS Connectivity Developer ?                     Guide. Use option 8 to create the accounts.   I              15. Edit the SYLOGICALS.COM file and add the following line:   3                    $ DEFINE DCOM$TO_BE_STARTED TRUE   ?              16. Start COM for OpenVMS. For this procedure, seeT                  Section 1.11.  E         1.5 Upgrading COM for OpenVMS on an OpenVMS Standalone System   F                 ________________________ Note ________________________  D                 Before you start, Compaq recommends that you disable?                 any Compaq Advanced Server for OpenVMS, OpenVMS @                 Registry, and layered product automatic startups=                 so that these products do not start until youi@                 have upgraded COM for OpenVMS and its associated                 components.f  ,                 Use the following procedure:  E                 1. Edit the SYLOGICALS.COM file to stop the following *                    products from starting:  F                    o  OpenVMS Registry (remove the line DEFINE REG$TO_A                       BE_STARTED TRUE or DEFINE/SYSTEM REG$TO_BE_S#                       STARTED TRUE)C  >                    o  COM for OpenVMS (comment the line DEFINE.                       DCOM$TO_BE_STARTED TRUE)  .         1-6 Installing the COM for OpenVMS Kit o  e      I                                        Installing the COM for OpenVMS Kit I             1.5 Upgrading COM for OpenVMS on an OpenVMS Standalone System     F                 2. Edit the SYS$STARTUP:SYSTARTUP_VMS.COM file to stop8                    the following products from starting:  E                    o  Compaq Advanced Server for OpenVMS (comment the_:                       line @SYS$STARTUP:PWRK$STARTUP.COM).  F                 If COM for OpenVMS is currently running, shut down COME                 for OpenVMS first, Compaq Advanced Server for OpenVMS <                 (if running), and then the OpenVMS Registry.  F                 ______________________________________________________  *               Use the following procedure:  E               1. Upgrade to OpenVMS Version 7.2-1 or higher. For thisnI                  procedure, see the OpenVMS Alpha Version 7.x Upgrade and_%                  Installation Manual.   C               2. If you need to upgrade TCP/IP, upgrade TCP/IP now.uG                  For this procedure, see the Compaq TCP/IP Services foriG                  OpenVMS Installation and Configuration  manual or your_1                  TCP/IP supplier's documentation.   ?               3. Boot the upgraded system from the system disk.i  A               4. Upgrade COM for OpenVMS. For this procedure, see                   Section 1.9.M  G               5. Install or upgrade Compaq Advanced Server for OpenVMS._G                  You must reboot 0 to n times, depending on your systemdB                  configuration. For this procedure, see the CompaqD                  Advanced Server for OpenVMS Server Installation and%                  Configuration Guide.   E               6. Start TCP/IP unless you have enabled TCP/IP to startlG                  on a reboot. For this procedure, see the Compaq TCP/IP D                  Services for OpenVMS Installation and Configuration@                  manual or your TCP/IP supplier's documentation.  C               7. Start the OpenVMS Registry unless you have enabledOD                  the OpenVMS Registry to start on a reboot. For thisH                  procedure, see Section 11.2 in the OpenVMS Connectivity!                  Developer Guide.     I                                    Installing the COM for OpenVMS Kit 1-7o i  r      *         Installing the COM for OpenVMS KitE         1.5 Upgrading COM for OpenVMS on an OpenVMS Standalone Systemu    7               8. If you want to run DCE, start DCE now.o  F                 ________________________ Note ________________________  B                 You do not need DCE to run COM for OpenVMS, but ifE                 your environment uses DCE, Compaq recommends that you                  start DCE now.  F                 ______________________________________________________  H                  For this procedure, see the Compaq DCE Installation and%                  Configuration Guide.t  <                  For more information about OpenVMS external?                  authentication, see Section 5.1 in the OpenVMSi.                  Connectivity Developer Guide.  B               9. Configure Compaq Advanced Server for OpenVMS. YouA                  must reboot to finish Compaq Advanced Server forCA                  OpenVMS configuration. You need to reboot 0 to neH                  times, depending on your system configuration. For thisF                  procedure, see the Compaq Advanced Server for OpenVMS=                  Server Installation and Configuration Guide.   E              10. Start Compaq Advanced Server for OpenVMS (set up for G                  startup on reboot). For this procedure, see the CompaqlD                  Advanced Server for OpenVMS Server Installation and%                  Configuration Guide..  B              11. Start the ACME server. Use the following command:  5                    $ @SYS$STARTUP:NTA$STARTUP_NT_ACME   6              12. Start RPC. Use the following command:  5                    $ @SYS$STARTUP:DCE$RPC_STARTUP.COM   E              13. See Appendix D in the OpenVMS Connectivity Developer$H                  Guide for detailed information about upgrading from COMH                  Version 1.0 for OpenVMS to COM Version 1.2 for OpenVMS.  C              14. Configure COM for OpenVMS. For this procedure, see I                  Section 1.10 and Section 6.2 in the OpenVMS Connectivity_!                  Developer Guide._  F                  o  Populate the OpenVMS Registry. For this procedure,I                     see Section 6.2 in the OpenVMS Connectivity Developer H                     Guide. Use option 3 to populate the OpenVMS Registry                     database.   .         1-8 Installing the COM for OpenVMS Kit C  n      I                                        Installing the COM for OpenVMS KitrI             1.5 Upgrading COM for OpenVMS on an OpenVMS Standalone SystemS    E                  o  Create any OpenVMS and Compaq Advanced Server for B                     OpenVMS accounts needed by the COM for OpenVMSF                     Service Control Manager. For more information, seeE                     Section 6.2 in the OpenVMS Connectivity Developer ?                     Guide. Use option 8 to create the accounts.i  I              15. Edit the SYLOGICALS.COM file and add the following line:v  3                    $ DEFINE DCOM$TO_BE_STARTED TRUEd  ?              16. Start COM for OpenVMS. For this procedure, seet                  Section 1.11.  <         1.6 Installing COM for OpenVMS on an OpenVMS Cluster  F                 ________________________ Note ________________________  C                 This cluster installation procedure assumes you arehC                 installing COM for OpenVMS on a single system disk._  F                 ______________________________________________________  *               Use the following procedure:  F               1. Install OpenVMS Version 7.2-1 or higher on all systemG                  disks as required. For this procedure, see the OpenVMS C                  Alpha Version 7.x Upgrade and Installation Manual.   C               2. Install TCP/IP. For this procedure, see the Compaq =                  TCP/IP Services for OpenVMS Installation ande?                  Configuration manual or your TCP/IP supplier'so                  documentation.F  @               3. Boot the installed system from the system disk.  I               4. Install COM Version 1.2 for OpenVMS. For this procedure,t!                  see Section 1.9.   H               5. Install Compaq Advanced Server for OpenVMS on this nodeC                  in the cluster. For this procedure, see the CompaqCD                  Advanced Server for OpenVMS Server Installation and%                  Configuration Guide.e  F                 ________________________ Note ________________________  F                 You must install Compaq Advanced Server for OpenVMS onD                 at least one Alpha node in the cluster. On the otherD                 nodes, you can either install Compaq Advanced Server  I                                    Installing the COM for OpenVMS Kit 1-9p d         *         Installing the COM for OpenVMS Kit<         1.6 Installing COM for OpenVMS on an OpenVMS Cluster    D                 for OpenVMS or select External Authentication images                 (only).   F                 ______________________________________________________  G               6. Configure TCP/IP (set up for startup on reboot on eachdD                  node) and start TCP/IP. You must configure the PWIPE                  driver for Compaq Advanced Server for OpenVMS to use F                  TCP/IP. For information about configuring TCP/IP, seeD                  the Compaq TCP/IP Services for OpenVMS InstallationC                  and Configuration manual or your TCP/IP supplier'sI                  documentation.   0               7. Configure the OpenVMS Registry:  I                  o  Run REG$CONFIG.COM to configure the OpenVMS Registry.eH                     You need to configure the OpenVMS Registry only onceD                     for the cluster. See Section 11.2 in the OpenVMS1                     Connectivity Developer Guide.p  D                  o  Set the SYS$REGISTRY logical to DEFINE/SYSTEM onE                     every Alpha node in the cluster that will run theM,                     OpenVMS Registry server.  E                  o  Edit the SYLOGICALS.COM file on every node in thee'                     cluster as follows:   C                     -  If the cluster uses a single, cluster-commonCH                        SYLOGICALS.COM file that is called by each node'sG                        SYLOGICALS.COM file, you do not need to make anyn                        changes.r  G                     -  On those nodes where you do not want the OpenVMS_H                        Registry server to run, add the following line to/                        the SYLOGICALS.COM file:   @                          $ DEFINE/SYSTEM REG$TO_BE_STARTED FALSE  D                     Compaq Advanced Server for OpenVMS requires thatD                     the OpenVMS Registry be running on a node in the                     cluster.                 8. Configure DCE.   F                 ________________________ Note ________________________  B                 You do not need DCE to run COM for OpenVMS, but ifE                 your environment uses DCE, Compaq recommends that youe  /         1-10 Installing the COM for OpenVMS Kitc n  9      I                                        Installing the COM for OpenVMS Kit I                      1.6 Installing COM for OpenVMS on an OpenVMS Cluster                      start DCE now.  F                 ______________________________________________________  H                  For this procedure, see the Compaq DCE Installation and%                  Configuration Guide.b  @               9. If you want to run DCE, start DCE now. You mustD                  configure DCE on each node on which you want to run                  DCE.i  <                  For more information about OpenVMS external?                  authentication, see Section 5.1 in the OpenVMSv.                  Connectivity Developer Guide.  H              10. Configure and start Compaq Advanced Server for OpenVMS.G                  For this procedure, see the Compaq Advanced Server for E                  OpenVMS Server Installation and Configuration Guide.o  C                  If this node is running Compaq Advanced Server for C                  OpenVMS, set up Compaq Advanced Server for OpenVMS D                  for startup on reboot (edit the SYS$STARTUP file asD                  necessary). You must reboot 0 to n times as needed,8                  depending on your system configuration.  G                  If this node is not running Compaq Advanced Server for E                  OpenVMS, edit the SYLOGICALS.COM file and define the_F                  PWRK$ACME_SERVER logical. For this procedure, see theG                  Compaq Advanced Server for OpenVMS Server Installation H                  and Configuration Guide. For more information about theG                  PWRK$ACME_SERVER logical, see Table 8-2 in the OpenVMSn.                  Connectivity Developer Guide.  B              11. Start the ACME server. Use the following command:  5                    $ @SYS$STARTUP:NTA$STARTUP_NT_ACME   6              12. Start RPC. Use the following command:  5                    $ @SYS$STARTUP:DCE$RPC_STARTUP.COMa  C              13. Configure COM for OpenVMS. For this procedure, seevI                  Section 1.10 and Section 6.2 in the OpenVMS Connectivitye!                  Developer Guide.   F                  o  Populate the OpenVMS Registry. For this procedure,I                     see Section 6.2 in the OpenVMS Connectivity DeveloperfH                     Guide. Use option 3 to populate the OpenVMS RegistryG                     database. You need to populate the OpenVMS Registry +                     only once in a cluster._  I                                   Installing the COM for OpenVMS Kit 1-11            *         Installing the COM for OpenVMS Kit<         1.6 Installing COM for OpenVMS on an OpenVMS Cluster    E                  o  Create any OpenVMS and Compaq Advanced Server for B                     OpenVMS accounts needed by the COM for OpenVMSF                     Service Control Manager. For more information, seeE                     Section 6.2 in the OpenVMS Connectivity DevelopereH                     Guide. Use option 8 to create the accounts. You needD                     to create these accounts only once in a cluster.  I              14. Edit the SYLOGICALS.COM file and add the following line:.  3                    $ DEFINE DCOM$TO_BE_STARTED TRUE   ?              15. Start COM for OpenVMS. For this procedure, seeS                  Section 1.11.  ;         1.7 Upgrading COM for OpenVMS in an OpenVMS Cluster   F                 ________________________ Note ________________________  >                 This cluster upgrade procedure assumes you areC                 installing COM for OpenVMS on a single system disk.r  F                 ______________________________________________________  F                 ________________________ Note ________________________  D                 Before you start, Compaq recommends that you disableB                 any Compaq Advanced Server for OpenVMS and layeredD                 products automatic startups so these products do notE                 start until you have upgraded COM for OpenVMS and its &                 associated components.  ,                 Use the following procedure:  E                 1. Edit the SYLOGICALS.COM file to stop the following *                    products from starting:  F                    o  OpenVMS Registry (comment the line DEFINE/SYSTEM-                       REG$TO_BE_STARTED TRUE)_  >                    o  COM for OpenVMS (comment the line DEFINE.                       DCOM$TO_BE_STARTED TRUE)  F                 2. Edit the SYS$STARTUP:SYSTARTUP_VMS.COM file to stop8                    the following products from starting:  E                    -  Compaq Advanced Server for OpenVMS (comment the 9                       line @SYS$STARTUP:PWRK$STARTUP.COM)m  F                 If COM for OpenVMS is currently running, shut down COME                 for OpenVMS first, Compaq Advanced Server for OpenVMS   /         1-12 Installing the COM for OpenVMS Kit  t  e      I                                        Installing the COM for OpenVMS KiteI                       1.7 Upgrading COM for OpenVMS in an OpenVMS Cluster     B                 (if running), and then the OpenVMS Registry on all%                 nodes in the cluster.d  F                 ______________________________________________________  *               Use the following procedure:  B               1. Upgrade to OpenVMS Version 7.2-1 or higher on allC                  required system disks. For this procedure, see therC                  OpenVMS Alpha Version 7.x Upgrade and Installationu                  Manual.  C               2. Upgrade TCP/IP. For this procedure, see the Compaq =                  TCP/IP Services for OpenVMS Installation and @                  Configuration  manual or your TCP/IP supplier's                  documentation.V  ?               3. Boot the upgraded system from the system disk.   A               4. Upgrade to COM Version 1.2 for OpenVMS. For this ,                  procedure, see Section 1.9.  H               5. Upgrade Compaq Advanced Server for OpenVMS on this nodeC                  in the cluster. For this procedure, see the CompaqfD                  Advanced Server for OpenVMS Server Installation and%                  Configuration Guide.I  F                 ________________________ Note ________________________  F                 You must install Compaq Advanced Server for OpenVMS onD                 at least one Alpha node in the cluster. On the otherD                 nodes, you can either install Compaq Advanced ServerD                 for OpenVMS or select External Authentication images                 (only).t  F                 ______________________________________________________  B               6. Configure TCP/IP (set up for startup on reboot onC                  each node). You must configure the PWIP driver forcB                  Compaq Advanced Server for OpenVMS to use TCP/IP.B                  For information about configuring TCP/IP, see the@                  Compaq TCP/IP Services for OpenVMS InstallationC                  and Configuration manual or your TCP/IP supplier's                   documentation.s  I                                   Installing the COM for OpenVMS Kit 1-13l    e      *         Installing the COM for OpenVMS Kit;         1.7 Upgrading COM for OpenVMS in an OpenVMS Clustera    ;               7. Configure the OpenVMS Registry as follows:w  I                  o  Run REG$CONFIG.COM to configure the OpenVMS Registry.o@                     See Section 11.2 in the OpenVMS ConnectivityF                     Developer Guide. You need to configure the OpenVMS7                     Registry only once for the cluster.e  C                  o  Edit the SYLOGICALS.COM file on every node thatnF                     will run the OpenVMS Registry server to define the6                     SYS$REGISTRY logical. For example:  X                     $ DEFINE/SYSTEM SYS$REGISTRY cluster-visible-directory-specification  E                     Edit the SYLOGICALS.COM file on every node in the '                     cluster as follows:i  C                     -  If the cluster uses a single, cluster-common H                        SYLOGICALS.COM file that is called by each node'sG                        SYLOGICALS.COM file, you do not need to make any                         changes._  G                     -  On those nodes where you do not want the OpenVMSmH                        Registry server to run, add the following line to/                        the SYLOGICALS.COM file:   @                          $ DEFINE/SYSTEM REG$TO_BE_STARTED FALSE  H               8. Configure and start Compaq Advanced Server for OpenVMS.G                  For this procedure, see the Compaq Advanced Server foriE                  OpenVMS Server Installation and Configuration Guide.   C                  If this node is running Compaq Advanced Server for C                  OpenVMS, set up Compaq Advanced Server for OpenVMS D                  for startup on reboot (edit the SYS$STARTUP file asD                  necessary). You must reboot 0 to n times as needed,8                  depending on your system configuration.  G                  If this node is not running Compaq Advanced Server forPE                  OpenVMS, edit the SYLOGICALS.COM file and define thenF                  PWRK$ACME_SERVER logical. For this procedure, see theG                  Compaq Advanced Server for OpenVMS Server Installation H                  and Configuration Guide. For more information about theG                  PWRK$ACME_SERVER logical, see Table 8-2 in the OpenVMS .                  Connectivity Developer Guide.  B               9. Start the ACME server. Use the following command:  5                    $ @SYS$STARTUP:NTA$STARTUP_NT_ACMEo  /         1-14 Installing the COM for OpenVMS Kit  C  e      I                                        Installing the COM for OpenVMS KitwI                       1.7 Upgrading COM for OpenVMS in an OpenVMS Cluster     6              10. Start RPC. Use the following command:  5                    $ @SYS$STARTUP:DCE$RPC_STARTUP.COM   E              11. See Appendix D in the OpenVMS Connectivity Developer H                  Guide for detailed information about upgrading from COMH                  Version 1.0 for OpenVMS to COM Version 1.2 for OpenVMS.  C              12. Configure COM for OpenVMS. For this procedure, seeeI                  Section 1.10 and Section 6.2 in the OpenVMS Connectivityo!                  Developer Guide.   F                  o  Populate the OpenVMS Registry. For this procedure,I                     see Section 6.2 in the OpenVMS Connectivity Developer H                     Guide. Use option 3 to populate the OpenVMS RegistryG                     database. You need to populate the OpenVMS RegistryO+                     only once in a cluster.e  E                  o  Create any OpenVMS and Compaq Advanced Server for B                     OpenVMS accounts needed by the COM for OpenVMSF                     Service Control Manager. For more information, seeE                     Section 6.2 in the OpenVMS Connectivity DeveloperUH                     Guide. Use option 8 to create the accounts. You needD                     to create these accounts only once in a cluster.  I              13. Edit the SYLOGICALS.COM file and add the following line:N  3                    $ DEFINE DCOM$TO_BE_STARTED TRUEM  E              14. Start COM for OpenVMS on a particular node. For this -                  procedure, see Section 1.11.n  9         1.8 Understanding the COM for OpenVMS Environment   H               COM for OpenVMS relies on a number of interrelated serversI               (processes) and operating system images. In most cases, theeF               servers start automatically when you restart the system.E               (Automatic startup requires that you have installed and_I               configured each component and have made appropriate changesuE               to the SYLOGICALS.COM file.) For more information aboutyD               starting and configuring the servers, see Section 1.3.  H               Figure 1-1 shows the relationships and dependencies of the4               processes and operating system layers.  I                                   Installing the COM for OpenVMS Kit 1-15C f         *         Installing the COM for OpenVMS Kit9         1.8 Understanding the COM for OpenVMS Environment(    I               Table 1-1 lists the process names and maps each name to its #               corresponding server.M  I               Table_1-1_Process_Name_to_Server_Name_Mapping______________   I               Process_name__Server_name___________For_more_information___   ?               DCOM$RPCSS    COM for OpenVMS       Section 1.8.1 +                             Service Controlo)                             Manager (SCM)$  ?               REGISTRY_     OpenVMS Registry      Section 1.8.2 "               SERVER        server  ?               PWRKxxx       Compaq Advanced       Section 1.8.3 .                             Server for OpenVMS,                             server (multiple&                             processes)  ?               ACME_SERVER   ACME server           Section 1.8.4   I               DCE$RPCD______RPC_endpoint_mapper___Section_1.8.5__________s  F               The following sections list and describe the servers and               the layers._  ;         1.8.1 COM for OpenVMS Service Control Manager (SCM)d  I               The COM for OpenVMS Service Control Manager enables COM for                OpenVMS.  &               Process name: DCOM$RPCSS  D               Requires: OpenVMS Registry, OpenVMS (RPC and SSPI/NTLM               layers).  +               Required by: COM applicationsr  G               Configured by: DCOM$SETUP. See Section 6.2 in the OpenVMSa+               Connectivity Developer Guide.   F               Started by: DCOM$SETUP, option 4. See Section 6.2 in the3               OpenVMS Connectivity Developer Guide.   G               Shutdown procedure: DCOM$SETUP, option 5. See Section 6.2 :               in the OpenVMS Connectivity Developer Guide.  /         1-16 Installing the COM for OpenVMS Kitn i  o      I                                        Installing the COM for OpenVMS Kit I                         1.8 Understanding the COM for OpenVMS Environment     %         1.8.2 OpenVMS Registry Server   F               The OpenVMS Registry server manages the OpenVMS Registry               database.d  +               Process name: REGISTRY_SERVERt                 Requires: None.t  F               Required by: COM for OpenVMS, Compaq Advanced Server for               OpenVMS   H               Configured by: REG$CONFIG. See Section 11.2 in the OpenVMS+               Connectivity Developer Guide._  H               Started by: REG$STARTUP. See Section 13.3.1 in the OpenVMS+               Connectivity Developer Guide.   B               Shutdown procedure: SET SERVER REGISTRY_SERVER/EXIT.C               For more information, see Section 13.4 in the OpenVMS +               Connectivity Developer Guide.e  7         1.8.3 Compaq Advanced Server for OpenVMS Servern  D               The Compaq Advanced Server for OpenVMS server provides2               Windows NT and OpenVMS connectivity.                 Process names:                    NETBIOS                  PWRK$ADMIN_0                   PWRK$KNBDAEMONt                  PWRK$LICENSE_Rp                  PWRK$LMBROWSER                   PWRK$LMMCPe                  PWRK$LMSRVw                  PWRK$MASTER                  PWRK$MONITORp                  PWRK$NBDAEMON  =               The ACME server requires the PWRK$LMSRV process                specifically.e  (               Requires: OpenVMS Registry  &               Required by: ACME server  (               Configured by: PWRK$CONFIG  &               Started by: PWRK$STARTUP  /               Shutdown procedure: PWRK$SHUTDOWNe  I                                   Installing the COM for OpenVMS Kit 1-17            *         Installing the COM for OpenVMS Kit9         1.8 Understanding the COM for OpenVMS Environment.    H               For more information, see the Compaq PATHWORKS for OpenVMS7               (Advanced Server) Server Migration Guide.r           1.8.4 ACME Server   C               The ACME server controls the granting of credentials.   '               Process name: ACME_SERVERo  :               Requires: Compaq Advanced Server for OpenVMS  I               Required by: OpenVMS (RPC and SSPI/NTLM layers) and OpenVMS                Events                 Started:  H               o  Automatically when the SYLOGICALS.COM file contains the>                  following line: NTA$NT_ACME_TO_BE_STARTED YES  H               o  You can also start the ACME server manually by entering'                  the following command:a  3                  $ @SYS$STARTUP:NTA$STARTUP_NT_ACMEl  !               Shutdown procedure:   0               $ SET SERVER ACME {/EXIT | /ABORT}  D               For more information, see Section 8.3.2 in the OpenVMS+               Connectivity Developer Guide.   !         1.8.5 RPC Endpoint Mapper   A               The RPC endpoint mapper controls authentication and                security.g  $               Process name: DCE$RPCD  !               Requires: RPC imageg  G               Required by: COM for OpenVMS Service Control Manager, RPC.               imageh  !               Started by: OpenVMS   F               Shutdown procedure: Use the following command procedure:  3                 $ @SYS$STARTUP:DCE$RPC_SHUTDOWN.COMa  F               For more information, see the Compaq DCE for OpenVMS VAX'               and OpenVMS Alpha manual.   /         1-18 Installing the COM for OpenVMS Kite u  .      I                                        Installing the COM for OpenVMS Kit I                         1.8 Understanding the COM for OpenVMS Environmenth    &         1.8.6 RPC and SSPI/NTLM Layers  I               The RPC and SSPI/NTLM layers provides remote procedure call =               and Windows NT-style authentication on OpenVMS.e  B               Process name: n/a (part of OpenVMS operating system)  ,               Requires: OpenVMS, ACME server  *               Required by: COM for OpenVMS  !               Started by: OpenVMS   %               Shutdown procedure: n/a            1.8.7 OpenVMS Events  I               The Events layer provides Windows NT-style event logging on                OpenVMS.  B               Process name: n/a (part of OpenVMS operating system)  #               Requires: ACME servert  *               Required by: COM for OpenVMS  !               Started by: OpenVMSR  %               Shutdown procedure: n/a   A               For more information, see Chapter 16 in the OpenVMS +               Connectivity Developer Guide.   &         1.9 Installing COM for OpenVMS  D               The COM for OpenVMS installation kit contains a singleE               POLYCENTER Software Installation utility file. The namedC               of the kit is DEC-AXPVMS-DCOM-H0102--1.PCSI. You musteC               install the COM for OpenVMS files on an OpenVMS AlphaeF               system. Please check the prerequisites before installing'               the kit. See Section 1.2.   H               To install COM for OpenVMS, invoke the POLYCENTER Software?               Installation utility using the following command:   ;                $ PRODUCT INSTALL /SOURCE=device:[user] DCOMe  F               For device:[user], specify the device name and directory0               location of the kit, respectively.  I                                   Installing the COM for OpenVMS Kit 1-19s d         *         Installing the COM for OpenVMS Kit&         1.9 Installing COM for OpenVMS    F                 ______ MIDL compiler license no longer required ______  D                 The COM for OpenVMS MIDL compiler no longer requires&                 the DCOM-MIDL license.  F                 ______________________________________________________  6               Example 1-1 shows a sample installation.                                                                          /         1-20 Installing the COM for OpenVMS Kit  t         I                                        Installing the COM for OpenVMS Kit I                                            1.9 Installing COM for OpenVMS     7         Example 1-1 Sample COM for OpenVMS Installation   6         $ product install dcom/source=disk:[directory]  0         The following product has been selected:@             DEC AXPVMS DCOM V1.2                 Layered Product  &         Do you want to continue? [YES]  (         Configuration phase starting ...  N         You will be asked to choose options, if any, for each selected productQ         and for any products that may be installed to satisfy software dependencyn         requirements.            DEC AXPVMS DCOM V1.2  F             Copyright 2002 Compaq Information Technologies Group, L.P.  7         Do you want the defaults for all options? [YES]   F             The following software is required to run  COM for OpenVMS  .               - OpenVMS Alpha V7.2-1 or higher7                 - Includes DCE RPC and OpenVMS Registry(Q               - TCP/IP Services for OpenVMS V5.0 or later (or equivalent product)E9               - Advanced Server for OpenVMS V7.3 or later_  *             Do you want to continue? [YES]  /         Do you want to review the options? [NO]n  $         Execution phase starting ...  ?         The following product will be installed to destination:a              DEC AXPVMS DCOM V1.2%         DISK$AXP_72PLUS:[VMS$COMMON.]n           Portion done: G         0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%e  1         The following product has been installed: @             DEC AXPVMS DCOM V1.2                 Layered Product  	         $   I                                   Installing the COM for OpenVMS Kit 1-21     n      *         Installing the COM for OpenVMS Kit8         1.10 COM for OpenVMS Postinstallation Procedures    8         1.10 COM for OpenVMS Postinstallation Procedures  ?               After you install the COM for OpenVMS kit, do the                following:  B               1. Verify that the OpenVMS Registry is running. (SeeF                  Chapter 13 the OpenVMS Connectivity Developer Guide.)  F               2. Verify that the Compaq Advanced Server for OpenVMS isD                  running. (See Section 1.8.3 for the Compaq Advanced3                  Server for OpenVMS process names.)e  =               3. Verify that the ACME server is running. (See =                  Section 1.8.4 for the name of this process.)t  <               4. Verify that the RPC daemon is running. (See<                  Section 1.8.5 for the name of the process.)  H               5. Populate the OpenVMS Registry with the required COM forF                  OpenVMS keys and values using the DCOM$SETUP utility,G                  option 3. (See Section 6.2 in the OpenVMS Connectivity C                  Developer Guide.) You must do this only once in an !                  OpenVMS Cluster.   F               6. Configure the DCOM$RPCSS account using the DCOM$SETUPE                  utility, option 8. (See Section 6.2.1 in the OpenVMS E                  Connectivity Developer Guide.) You must do this only ,                  once in an OpenVMS Cluster.  D               7. Start COM for OpenVMS using the DCOM$SETUP utility,G                  option 4. (See Section 6.2 in the OpenVMS ConnectivityIG                  Developer Guide.) You must do this on every node in an !                  OpenVMS Cluster.   H               8. If you want COM for OpenVMS to start automatically whenI                  the system reboots, modify the DEFINE DCOM$TO_BE_STARTED G                  line in the SYLOGICALS.COM file. (See Section 1.11.1.)yF                  You must do this on every node in an OpenVMS Cluster.  I               9. Configure COM for OpenVMS security. See Chapter 5 in thet6                  OpenVMS Connectivity Developer Guide.        /         1-22 Installing the COM for OpenVMS Kit            I                                        Installing the COM for OpenVMS KitoI   1.11 Starting COM for OpenVMS (COM for OpenVMS Service Control Manager)p    F         1.11 Starting COM for OpenVMS (COM for OpenVMS Service Control              Manager)   A               Use the following command to start COM for OpenVMS:f  +                 $ @SYS$STARTUP:DCOM$STARTUPC  F               Alternately, you can run DCOM$SETUP and choose option 4.D               (See Section 6.2 in the OpenVMS Connectivity Developer               Guide.)v  C               The COM for OpenVMS Service Control Manager can be inhF               one of the following states: initializing/running or notG               started. Depending on the COM for OpenVMS Service ControlEH               Manager state, you will see one of the following messages:  B               o  If the COM for OpenVMS Service Control Manager isB                  running on this node, the system reports that the+                  process is already active:e  \                    DCOM Service Control Manager daemon (DCOM$RPCSS) is active [pid=xxxxxxxx]  B                  If the COM for OpenVMS Service Control Manager isG                  initializing on this node, the system reports that thee+                  process is already active:g  a                    DCOM Service Control Manager daemon (DCOM$STARTUP-**) is active [pid=xxxxxxxx]   F               o  If the COM for OpenVMS Service Control Manager is notH                  started on this node, the system starts COM for OpenVMS                  as follows:  O                    The OpenVMS Registry server is already started on this node.p  C                             ***  DCOM system startup procedure  ***e  \                     Starting DCOM Service Control Manager daemon ( "DCOM$STARTUP-**" ) . . .]                     After initialization, the daemon will use process name "DCOM$RPCSS" . . .n  N                  %RUN-S-PROC_ID, identification of created process is xxxxxxxx  =                             ***  DCOM startup successful  ***   ?                       ***  DCOM Startup Procedure Complete  ***e  I                                   Installing the COM for OpenVMS Kit 1-23  e  r      *         Installing the COM for OpenVMS KitO         1.11 Starting COM for OpenVMS (COM for OpenVMS Service Control Manager)n    D         1.11.1 Starting COM for OpenVMS Automatically after a Reboot  3               Compaq recommends that you modify the D               SYS$MANAGER:SYLOGICALS.COM command file to control COM"               for OpenVMS startup.  F               OpenVMS includes a revised SYLOGICALS.TEMPLATE file thatC               includes new startup commands for COM for OpenVMS and B               related components. Review the "Coordinated Startup"C               section of this template file and add the appropriateh9               information to your existing startup files.   I               To have COM for OpenVMS start automatically when the system I               boots, copy the following line to your SYLOGICALS.COM file,tB               uncomment the line, and make sure it is set to TRUE:  .               $ DEFINE DCOM$TO_BE_STARTED TRUE  F               If you do not set COM for OpenVMS to start automaticallyB               when the system boots, you can start COM for OpenVMSH               using the DCOM$SETUP OpenVMS COM Tools menu, option 4 (seeG               Section 6.2 in the OpenVMS Connectivity Developer Guide).s  C         1.12 Shutting Down COM for OpenVMS (COM for OpenVMS Service,              Control Manager)   E               Use the following command to shut down COM for OpenVMS:   ,                 $ @SYS$STARTUP:DCOM$SHUTDOWN  F               Alternately, you can run DCOM$SETUP and choose option 5.D               (See Section 6.2 in the OpenVMS Connectivity Developer               Guide.)o  G               The COM for OpenVMS Service Control Manager can be in one I               of the following states: stopped, running, or initializing.mF               Depending on the COM for OpenVMS Service Control Manager@               state, you will see one of the following messages:  B               o  If the COM for OpenVMS Service Control Manager isD                  stopped on this node, the system reports that there)                  is nothing to shut down:n  A                          ***  DCOM system shutdown procedure  ***   H                     There is no active DCOM$RPCSS daemon on this system.  @                       ***  DCOM Shutdown Procedure Complete  ***  /         1-24 Installing the COM for OpenVMS Kit  c  i      I                                        Installing the COM for OpenVMS KiteI  Shutting  Down COM for OpenVMS (COM for OpenVMS Service Control Manager)     B               o  If the COM for OpenVMS Service Control Manager isH                  running on this node, the system shuts down the process                  as follows:  A                          ***  DCOM system shutdown procedure  ***   U                  *************************** Warning ******************************** S                  ***  Stopping the DCOM Service Control Manager daemon (DCOM$RPCSS)VM                  ***  Active DCOM applications will no longer be operational.i  K                  Do you want to proceed with this operation (YES/NO/?) [N]?   A                  Enter Y to continue with the shutdown procedure.r  F                 ________________________ Note ________________________  C                 For information about suppressing this confirmation )                 step, see Section 1.12.1.U  F                 ______________________________________________________  <                  The system displays the following messages:  V                     Terminating DCOM Service Control Manager daemon (DCOM$RPCSS) . . .  ;                          ***  DCOM shutdown successful  ***t  @                       ***  DCOM Shutdown Procedure Complete  ***  B               o  If the COM for OpenVMS Service Control Manager isE                  initializing on this node, the system shuts down thed$                  process as follows:  A                          ***  DCOM system shutdown procedure  ***   U                  *************************** Warning ******************************** S                  ***  Stopping the DCOM Service Control Manager daemon (DCOM$RPCSS) M                  ***  Active DCOM applications will no longer be operational.r  K                  Do you want to proceed with this operation (YES/NO/?) [N]?   E                  Enter Y to continue with the shutdown procedure. The 8                  system displays the following messages:  [                     Terminating DCOM Service Control Manager daemon (DCOM$STARTUP-**) . . .e  ;                          ***  DCOM shutdown successful  ***   @                       ***  DCOM Shutdown Procedure Complete  ***  I                                   Installing the COM for OpenVMS Kit 1-25o .  n      *         Installing the COM for OpenVMS KitT         1.12 Shutting Down COM for OpenVMS (COM for OpenVMS Service Control Manager)    A         1.12.1 Suppressing the DCOM$SHUTDOWN Confirmation Request   E               You can suppress the DCOM$SHUTDOWN command confirmation D               request by specifying the NOCONFIRM parameter. Use the                following command:  7                  $ @SYS$STARTUP:DCOM$SHUTDOWN NOCONFIRMt  I               The system displays the following shutdown messages withoute4               prompting you to confirm the shutdown:  >                       ***  DCOM system shutdown procedure  ***  S                  Terminating DCOM Service Control Manager daemon (DCOM$RPCSS) . . .   8                       ***  DCOM shutdown successful  ***  =                    ***  DCOM Shutdown Procedure Complete  ***S                                                      /         1-26 Installing the COM for OpenVMS Kit     .                            F      _________________________________________________________________  F                                                                  Index      F      D______________________________   M______________________________  D      DCOM$TO_BE_STARTED logical,       Modifying the SYLOGICALS fileD         1-24                              for COM for OpenVMS,  1-24$      DECwindows Motif required,  1-3  F                                        S______________________________  E                                        Shutting down COM for OpenVMS,n.                                           1-24C                                          NOCONFIRM parameter,  1-26p                                              F                                                                Index-1