    	 Overview: < ------------------------------------------------------------  , This kit essentially contains the sources of  (  o Kaleb S. Keithley's Xaw3D widget set.?    This widget set is intended to improve the visual appearance "    of the common X Athena Widgets.E    In general it may be used as a replacement for the Xaw widget set. '  o the X Miscellaneous Utilities (Xmu).   o Ghostview-VMS. A    Ghostview-VMS allows to view postscript files on an X display. <    As implied by its name, it is derived from ghostview 1.5.,  o David M. Brooke's VMS port of XFig 2.1.6./    XFig allows to draw figures on an X display.   > Please note that this kit is intended to support Ghostview-VMS? and the Xaw3D widget set only. The sources of XFig are included  for convenience only.    Xaw3D: ------  B Apart from changes introduced to provide functionality on OpenVMS,4 the Xaw3D widget set contained in this kit includes 7  o a modified version of Keith Packard's Layout widget. E  o a different Scrollbar widget, added to complete the 3D appeareance     of the simple widgets. )  o a modifed version of the Paned widget. E    The modifications are minimal and are restricted to details of its     visual appearance. !  o a composite 3D widget, Form3D. > The original versions of all modified widgets listed above are; included. With the exception of the Layout widget this code 9 is in a functional state and may be used in case problems ! arise with the modified versions. 3 The Xaw3D library will be build as shareable image.    Xmu: ----  * The X Miscellaneous Utilities are included= to make this kit self-contained and to implement all resource ' converters needed by the Xaw3D clients. 1 The Xmu library will be build as shareable image.    GhostView-VMS: --------------  = GhostView-VMS is derived from Timothy Theisen's ghostview 1.5 $ and allows to view postscript files.< GhostView-VMS requires ghostscript (version 2.52 or higher).1 ghostscript as well as the original ghostview 1.5  may be obtained from    site:   ftp.cs.wisc.edu    dir:    pub/ghostA Please see the accompanying documentation for further information  on GhostView-VMS.    XFig:  -----   = The version of XFig included in this kit is David M. Brooke's  VMS port of XFig 2.1.6.    Files:F ------------------------------------------------------------------           + The archives contained in this package are:      BITMAPS.ZIP	: X11 bitmaps.  :                   Required by Xmu, Xaw3D and many clients.7   COMMAND.ZIP	: Platform independant DCL command files. ;                   Contains the setup procedure of this kit. ;   DATA.ZIP	: Contains additional application specific data.                    Required.     DEFAULTS.ZIP	: Resource Files.                   Required. 2   EXE.ZIP       : Executable code for OpenVMS VAX.+                   Required on OpenVMS VAX.  2   EXE_ALPHA.ZIP : Executable code for OpenVMS AXP.*                   Required on OpenVMS AXP.'   GV.ZIP	: GhostView-VMS, Version 2.0 . G   INSTALL.ZIP	: Documentation and installation guidelines for this kit.                    Required. E   X11R4_VMS.ZIP	: Trevor Taylors VMS-specific X11 code contributions. (                   Required by XFig only.   XAW3D.ZIP	: Xaw3D widget set. 5                   Required by GhostView-VMS and XFig. #   XFIG.ZIP	: XFig, Version 2.1.6 .  +   XMU.ZIP	: X Miscellaneous Utilities (Xmu) =                   Required by Xaw3D and many of its clients.    > Assuming you want to install Ghostview-VMS, you should obtain:   BITMAPS.ZIP 
   COMMAND.ZIP 
   DATA.ZIP   DEFAULTS.ZIP	   EXE.ZIP    EXE_ALPHA.ZIP    GV.ZIP
   INSTALL.ZIP    XAW3D.ZIP 	   XMU.ZIP 8 If you like to install XFig also, you additionally need:
   XFIG.ZIP   X11R4.ZIP      Installation Preliminaries: > --------------------------------------------------------------  > This kit was developed on OpenVMS AXP 6.1 and OpenVMS VAX 6.1. It was tested on:   *    Operating System	  X Windows	  Compiler8    -----------------------------------------------------4    OpenVMS AXP V6.1	  X11 Release 5   DEC C V4.0-0008    OpenVMS VAX V6.1       X11 Release 5   VAX C V3.2-0448    OpenVMS VAX V6.1       X11 Release 5   DEC C V4.0-0008    OpenVMS VAX V5.5-2H4   X11 Release 4   VAX C V3.2-044  . Additional software required for installation:     o  MMS or MMK A      MMK is Matt's Make Utility. The latest version (V3.3) may be $      obtained via anonymous ftp from         site:  ftp.spc.edu  "         dir:   [.macro32.savesets]
   o  UNZIP  4 To use the software contained in this kit you should6 download all archives needed into one common directory6 (which will be called 'X11' within this documentation)6 This directory serves as the top node of this kit, may: have an arbitrary name but should not be nested to deeply.  5 Unpacking the archives will create the directory tree      X11 --- BITMAPS            COMMAND            DATA           DEFAULTS
           EXE            EXE_ALPHA            GV ------ DOC                      SOURCE                     UNUSED           INSTALL            XAW3D --- WIDGETS 1           XFIG ---- TRANSFIG -- DOC ------ MANUAL .                                 FIG2DEV -- DEV(                                 TRANSFIG#                     XFIG ------ DOC (                                 EXAMPLES
           XMU   	 The file      [.X11.INSTALL]INSTALL.TXT5 contains the remaining instructions needed to compile  and use this software.   The file    [.X11.INSTALL]CHANGES.TXTK contains pointers to files that describe the changes made since 1-JAN-1995.    Johannes Plass, February 1995   plass@dipmza.physik.uni-mainz.de  