CONTENTS

  Title Page

  Copyright Page

  Preface

  1      Introduction

  1.1     General Description

  1.2     Unpacking

  2      Connecting the SCSI488/D

  2.1     Mounting the SCSI488/D

  2.2     Preparing Your System

  2.3     Preparing the SCSI488/D
    2.3.1      Setting the SCSI ID on the SCSI488/D
    2.3.2      Setting the IEEE488 Bus Address of the SCSI488/D

  2.4     Connecting the SCSI488/D to Your System
    2.4.1      Connecting a Single SCSI488/D to Your System
    2.4.2      Connecting Multiple SCSI488/Ds to Your System

  3      Testing the SCSI488/D After Installation

  3.1     Front Panel Indicators on the SCSI488/D

  3.2     Testing the SCSI488/D for Errors

  3.3     Extended Testing of the SCSI488/D with IEZ11 Software

  A   SCSI488/D Hardware Specification

  B   IEEE488 Bus Implementation

  FIGURES

  1-1        The Front and Back Panels of the SCSI488/D

  2-1        SCSI ID and Power Up Default IEEE488 Bus Address Selection

  2-2        How to Connect a Single SCSI488/D

  2-3        How to Set Up a Daisy Chain for Two SCSI488/Ds

  TABLES

  1-1        Nomenclature

  1-2        IEZ11 Kit Contents

  2-1        Switch Settings for SCSI IDs and Power Up Default IEEE488 Bus Addresses

  3-1        Front Panel Indicators

  3-2        LED Combinations and Associated Errors

  A-1        Dimensions

  A-2        Operating and Nonoperating Conditions

  A-3        Storage Conditions

  A-4        Electrical Specification

  B-1        IEEE488 Bus Interface