V9HP DECprint Supervisor (DCPS) for OpenVMS\

HP DECprint Supervisor (DCPS) for OpenVMS
System Manager's Guide

h f

' 6 > S Y i m n u } s n g e n e i ” : K M I

Contents (summary)
Preface	Preface
Chapter 1	DCPS Overview
Chapter 2	Setting Up Printers
Chapter 3	Creating and Modifying Print Queues
Chapter 4	Providing Automatic Data Type Detection
Chapter 5	Manipulating Print Jobs and Print Queues
Chapter 6	Specifying Separation, Log, and Error Pages
Chapter 7	Creating Setup Modules and Device Control Libraries
Chapter 8	Creating and Maintaining Form Definitions
Chapter 9	Charging Users for Printer Resources
Chapter 10	Printer-Specific Information
Chapter 11	Troubleshooting Procedures
Appendix A	Printing System Management Commands
Appendix B	Logical Names Used by DCPS
Appendix C	Downloading and Deleting Fonts
Appendix D	DECprint Supervisor (DCPS) and DECprint Printing Services Software (CPS)
	Index
	Figures
	Examples
	Tables

' 9 < < < < <
Preface
Preface 7 Preface
Chapter 1
1 C DCPS Overview
"      1.1 k     Purpose of the DCPS Software
"      1.2 c     DCPS Software Components
<          1.2.1 w         The Print Symbiont
<          1.2.2 x         Device Control Libraries
<          1.2.3 r         Translators
Chapter 2
2 Q Setting Up Printers
"      2.1 `     Networked Printers
<          2.1.1 |         TCP/IP Printers
V              2.1.1.1 ™             Raw TCP/IP Printers
V              2.1.1.2             LPD Printers
V              2.1.1.3 ‘             CPAP Printers
<          2.1.2 w         LAT Printers
V              2.1.2.1 «             Configuring the Printer for LAT Access
V              2.1.2.2 ¬             Setting DECserver LAT Port Characteristics
V              2.1.2.3 ¥             Editing the LAT Configuration File
V              2.1.2.4 ª             Setting the Communications Speed
<          2.1.3 }         DECnet Printers
<          2.1.4 ƒ         AppleTalk Printers
"      2.2 x     Directly-Connected Serial Printers
"      2.3 `     General Information
<          2.3.1 x         Supported Printers
<          2.3.2         Setting the printer timeout
<          2.3.3         Changing the Printer Password
<          2.3.4         Setting the Printer Name
Chapter 3
3 X Creating and Modifying Print Queues
"      3.1 }     If You Are Installing the Software for the First Time
"      3.2 ¡     If You Are Upgrading From DECprint Printing Services Software (CPS)
"      3.3 n     Setting Up Execution Queues
<          3.3.1 ‘         Supplying the Name of the Execution Queue (P1)
<          3.3.2 •         Supplying the Printer Device Name (P2)
V              3.3.2.1 ¼             If Your Printer Is On a TCP/IP Network and Uses Raw TCP/IP Sockets
V              3.3.2.2             If Your Printer Is On a TCP/IP Network and Uses LPD
V              3.3.2.3 ´             If Your Printer Is On a LAT Network or Directly Connected
V              3.3.2.4 ³             If Your PrintServer Printer Is Part of a TCP/IP Network
V              3.3.2.5 ±             If Your PrintServer Printer Is Part of a DECnet Network
V              3.3.2.6 ©             If Your Printer Is Part of an AppleTalk Network
<          3.3.3 †         Supplying the Library Logical Name (P3)
<          3.3.4 ³         Assigning Default PRINT Command Parameters to the Queue (P4)
<          3.3.5 †         Supplying Default Queue Attributes (P5)
<          3.3.6 š         Setting the Speed for Serial Printers (P6)
<          3.3.7         Supplying SET DEVICE Qualifiers to the Queue (P7)
<          3.3.8 “         Enabling SET VERIFY When Initializing the Queue (P8)
"      3.4 ~     Running the Startup Procedure in Setup Mode
"      3.5 ‚     Customizing Execution Queue Behavior
<          3.5.1         Running DCPS as a Multistreamed Process
V              3.5.1.1 µ             Managing Print Queues When Running Multistreamed
V              3.5.1.2 ½             Changing the DCPS Environment When Running Multistreamed
V              3.5.1.3 ¹             Determing the Proper Value for DCPS$MAX_STREAMS
<          3.5.2         Interrupting Busy Printers When a Job Starts
<          3.5.3 Ÿ         Suppressing PostScript Synchronization When a Job Starts
<          3.5.4 œ         Purging the Symbiont Process's Working Set
<          3.5.5         Enabling Spooling for LPD Queues
<          3.5.6 “         Specifying Sheet Size for LPD Queues
<          3.5.7 —         Specifying Product Name for LPD Queues
<          3.5.8 ‘         Suppressing Unsolicited PJL Messages
<          3.5.9 ™         Suppressing the OPCOM Message USERNOTFOUND
=          3.5.10 ª         Using Old ANSI Translator Page Size for A4 Landscape
"      3.6 o     Setting Up Generic Queues
"      3.7     Activating Changes to the Queue Definitions
"      3.8 n     Testing the Printing System
Chapter 4
4 a Providing Automatic Data Type Detection
"      4.1 ~     How DCPS Automatically Detects Data Type
"      4.2 „     Specifying Automatic Data Type Detection
<          4.2.1 ’         Linking File Extensions with Data Types
<          4.2.2         Specifying Default Data Types for the System and Queues
<          4.2.3 —         How Users Control Data Type Detection
Chapter 5
5 ^ Manipulating Print Jobs and Print Queues
"      5.1 h     Displaying Print Job Status
"      5.2 `     Deleting a Print Job
"      5.3 z     Releasing a Print Job in the Holding State
"      5.4 b     Requeuing Print Jobs
<          5.4.1 „         Requeuing Pending Print Jobs
<          5.4.2 ž         Requeuing the Currently Printing Job to Another Queue
<          5.4.3         Requeuing Current and Future Print Jobs in a Queue
"      5.5 s     Modifying the Attributes of a Print Job
"      5.6 a     Displaying a Queue
"      5.7 ^     Pausing a Queue
"      5.8 `     Starting a Queue
"      5.9 q     Modifying the Attributes of a Queue
#      5.10 y     Preventing Users from Printing to a Queue
#      5.11 a     Deleting a Queue
#      5.12 o     Responding to a Stalled Queue
#      5.13 u     Stopping and Starting the Queue Manager

Preface
Preface	7 Preface
Chapter 1
1	C DCPS Overview
" 1.1	k Purpose of the DCPS Software
" 1.2	c DCPS Software Components
< 1.2.1	w The Print Symbiont
< 1.2.2	x Device Control Libraries
< 1.2.3	r Translators
Chapter 2
2	Q Setting Up Printers
" 2.1	` Networked Printers
< 2.1.1	\| TCP/IP Printers
V 2.1.1.1	™ Raw TCP/IP Printers
V 2.1.1.2	LPD Printers
V 2.1.1.3	‘ CPAP Printers
< 2.1.2	w LAT Printers
V 2.1.2.1	« Configuring the Printer for LAT Access
V 2.1.2.2	¬ Setting DECserver LAT Port Characteristics
V 2.1.2.3	¥ Editing the LAT Configuration File
V 2.1.2.4	ª Setting the Communications Speed
< 2.1.3	} DECnet Printers
< 2.1.4	ƒ AppleTalk Printers
" 2.2	x Directly-Connected Serial Printers
" 2.3	` General Information
< 2.3.1	x Supported Printers
< 2.3.2	Setting the printer timeout
< 2.3.3	Changing the Printer Password
< 2.3.4	Setting the Printer Name
Chapter 3
3	X Creating and Modifying Print Queues
" 3.1	} If You Are Installing the Software for the First Time
" 3.2	¡ If You Are Upgrading From DECprint Printing Services Software (CPS)
" 3.3	n Setting Up Execution Queues
< 3.3.1	‘ Supplying the Name of the Execution Queue (P1)
< 3.3.2	• Supplying the Printer Device Name (P2)
V 3.3.2.1	¼ If Your Printer Is On a TCP/IP Network and Uses Raw TCP/IP Sockets
V 3.3.2.2	If Your Printer Is On a TCP/IP Network and Uses LPD
V 3.3.2.3	´ If Your Printer Is On a LAT Network or Directly Connected
V 3.3.2.4	³ If Your PrintServer Printer Is Part of a TCP/IP Network
V 3.3.2.5	± If Your PrintServer Printer Is Part of a DECnet Network
V 3.3.2.6	© If Your Printer Is Part of an AppleTalk Network
< 3.3.3	† Supplying the Library Logical Name (P3)
< 3.3.4	³ Assigning Default PRINT Command Parameters to the Queue (P4)
< 3.3.5	† Supplying Default Queue Attributes (P5)
< 3.3.6	š Setting the Speed for Serial Printers (P6)
< 3.3.7	Supplying SET DEVICE Qualifiers to the Queue (P7)
< 3.3.8	“ Enabling SET VERIFY When Initializing the Queue (P8)
" 3.4	~ Running the Startup Procedure in Setup Mode
" 3.5	‚ Customizing Execution Queue Behavior
< 3.5.1	Running DCPS as a Multistreamed Process
V 3.5.1.1	µ Managing Print Queues When Running Multistreamed
V 3.5.1.2	½ Changing the DCPS Environment When Running Multistreamed
V 3.5.1.3	¹ Determing the Proper Value for DCPS$MAX_STREAMS
< 3.5.2	Interrupting Busy Printers When a Job Starts
< 3.5.3	Ÿ Suppressing PostScript Synchronization When a Job Starts
< 3.5.4	œ Purging the Symbiont Process's Working Set
< 3.5.5	Enabling Spooling for LPD Queues
< 3.5.6	“ Specifying Sheet Size for LPD Queues
< 3.5.7	— Specifying Product Name for LPD Queues
< 3.5.8	‘ Suppressing Unsolicited PJL Messages
< 3.5.9	™ Suppressing the OPCOM Message USERNOTFOUND
= 3.5.10	ª Using Old ANSI Translator Page Size for A4 Landscape
" 3.6	o Setting Up Generic Queues
" 3.7	Activating Changes to the Queue Definitions
" 3.8	n Testing the Printing System
Chapter 4
4	a Providing Automatic Data Type Detection
" 4.1	~ How DCPS Automatically Detects Data Type
" 4.2	„ Specifying Automatic Data Type Detection
< 4.2.1	’ Linking File Extensions with Data Types
< 4.2.2	Specifying Default Data Types for the System and Queues
< 4.2.3	— How Users Control Data Type Detection
Chapter 5
5	^ Manipulating Print Jobs and Print Queues
" 5.1	h Displaying Print Job Status
" 5.2	` Deleting a Print Job
" 5.3	z Releasing a Print Job in the Holding State
" 5.4	b Requeuing Print Jobs
< 5.4.1	„ Requeuing Pending Print Jobs
< 5.4.2	ž Requeuing the Currently Printing Job to Another Queue
< 5.4.3	Requeuing Current and Future Print Jobs in a Queue
" 5.5	s Modifying the Attributes of a Print Job
" 5.6	a Displaying a Queue
" 5.7	^ Pausing a Queue
" 5.8	` Starting a Queue
" 5.9	q Modifying the Attributes of a Queue
# 5.10	y Preventing Users from Printing to a Queue
# 5.11	a Deleting a Queue
# 5.12	o Responding to a Stalled Queue
# 5.13	u Stopping and Starting the Queue Manager

v j d f

Contents

Index

HP DECprint Supervisor (DCPS) for OpenVMSSystem Manager's Guide

Contents

HP DECprint Supervisor (DCPS) for OpenVMS
System Manager's Guide