
PRODUCT NAME:  VAXELN KMV1A Tool Kit, Version 1.1          SSA 29.17.01-A

HARDWARE REQUIREMENTS

Host Processor Support:

VAX: VAX 6000 Model 200 Series
     VAX 6000 Model 300 Series
     VAX 6000 Model 400 Series 

     VAX 8200, VAX 8250, VAX 8300, VAX 8350, VAX 8500, VAX 8530, VAX 8550, 
     VAX 8600, VAX 8650, VAX 8700, VAX 8800, VAX 8810, VAX 8820, VAX 8830, 
     VAX 8840, VAX 8842, VAX 8974, VAX 8978 

     VAX-11/730, VAX-11/750, VAX-11/780, VAX-11/785

MicroVAX: MicroVAX II, MicroVAX 2000, MicroVAX 3100, MicroVAX 3300, 
          MicroVAX 3400, MicroVAX 3500, MicroVAX 3600, MicroVAX 3800, 
          MicroVAX 3900

VAXstation: VAXstation II, VAXstation 2000, VAXstation 3100, 
            VAXstation 3200, VAXstation 3500, VAXstation 8000

VAXserver: VAXserver 3100, VAXserver 3300, VAXserver 3400, VAXserver 3500,
           VAXserver 3600, VAXserver 3602, VAXserver 3800, VAXserver 3900,
           VAXserver 6210, VAXserver 6220, VAXserver 6310, VAXserver 6320,
           VAXserver 6410, VAXserver 6420

Not Supported as Host: VAX-11/782

Target Processor Support:

VAX: VAX 6210, VAX 6220, VAX 6230, VAX 6240, VAX 6310, VAX 6312, VAX 6320, 
     VAX 6330, VAX 6333, VAX 6340, VAX 6350, VAX 6360, VAX 6410, VAX 6420, 
     VAX 6430, VAX 6440, VAX 6450, VAX 6460, VAX 8500, VAX 8530, VAX 8550,
     VAX 8700, VAX 8800, VAX 8810, VAX 8820

     VAX-11/730, VAX-11/750

MicroVAX: MicroVAX II, MicroVAX 2000, MicroVAX 3300/3400,
          MicroVAX 3500/3600, MicroVAX 3800/3900

Not Supported as Targets:

VAX: VAX 8200, VAX 8250, VAX 8300, VAX 8350, VAX 8600, VAX 8650, VAX 8830,
     VAX 8840, VAX 8842, VAX 8974, VAX 8978

     VAX-11/780, VAX-11/782, VAX-11/785

VAXstation: VAXstation II, VAXstation 2000, VAXstation 3100, 
            VAXstation 3200, VAXstation 3500, VAXstation 8000

VAXserver: VAXserver 3100, VAXserver 3300, VAXserver 3400, VAXserver 3500, 
           VAXserver 3600, VAXserver 3602, VAXserver 3800, VAXserver 3900, 
           VAXserver 6210, VAXserver 6220, VAXserver 6310, VAXserver 6320,
           VAXserver 6410, VAXserver 6420

Processor Restrictions

A TK50 tape drive is required for standalone MicroVAX 2000 and 
VAXstation 2000 systems. 

Other Hardware Required

Block Space Requirements (Block Cluster Size = 1):

Disk space required for installation:         500 blocks  
                                              (250K bytes)

Disk space required for use (permanent):      500 blocks  
                                              (250K bytes)

These counts refer to the disk space required on the system disk.  The sizes
are approximate; actual sizes may vary depending on the user's system
environment, configuration, and software options.  

OPTIONAL HARDWARE

One to eight KMV1A devices installed on a Q-bus type processor such as a
MicroVAX II.  

Note: The KMV1A devices are considered optional for the purpose of the 
      installation of the VAXELN KMV1A Tool Kit.  After the Tool Kit
      modules have been included in the system builds, execution of the
      system images created will require access up to 8 KMV1A devices
      installed on a Q-bus type processor.  It should further be noted
      that although 8 KMV1A devices may execute concurrently, the Tool
      Kit modules associated with a remote debug operation may only be
      included in a system build to connect one selected KMV1A on the 
      Q-bus processor.  

VAXCLUSTER ENVIRONMENT

This layered product is fully supported when installed on any valid and 
licensed VAXcluster* configuration without restrictions.  The HARDWARE 
REQUIREMENTS sections of this product's Software Product Description and
System Support Addendum detail any special hardware required by this product.

*V5.x VAXcluster configurations are fully described in the VAXcluster 
 Software Product Description (29.78.xx) and include CI, Ethernet, and Mixed
 Interconnect configurations.  

SOFTWARE REQUIREMENTS

For VAX Development Systems:

VMS Operating System V5.0 - V5.2

For MicroVAX II Development Systems:

VMS Operating System V5.0 - V5.2

VMS Tailoring 

For VMS V5.x systems, the following VMS classes are required for full 
functionality of this layered product:

^ VMS Required Saveset

For more information on VMS classes and tailoring, refer to the VMS Operating
System Software Product Description (SPD 25.01.xx).

OPTIONAL SOFTWARE

VAXELN Toolkit V3.1 - V3.2

VAX-11 RSX V2.4

NOTE: Since the VAX-11 RSX and the VAXELN Toolkit are defined as optional
      software for the purpose of the installation of the VAXELN KMV1A Tool 
      Kit, this optional software must be installed for system builds using 
      Toolkit modules and for the subsequent execution of the created 
      system images.  

GROWTH CONSIDERATIONS

The minimum hardware/software requirements for any future version of 
this product may be different from the minimum requirements for the current 
version.

DISTRIBUTION MEDIA

Tape: 9-track 1600 BPI MagTape, TK50 Streaming Tape

ORDERING INFORMATION

Software Licenses: QL-0JPA*-**
Software Media: QA-0JPA*-**
Software Documentation: QA-0JPAA-GZ
Software Product Services: QT-0JPA*-**

* Denotes variant fields. For additional information on available licenses, 
  services and media refer to the appropriate price book.

The above information is valid at time of release. Please contact your 
local DIGITAL office for the most up-to-date information.


September 1989
AE-NG09A-TK


