 















             VMS__________________________________________
             DECwindows V2.1 Language Variants and CBIs "Computer
             Based Instructions" Installation Guide


                                                              AA-PBRJB-TE




             October 1990

             This guide describes how to install VMS DECwindows V2.1
             Language Variants, CBI "Introduction to DECwindows Systems"
             and CBI "FileView and Its Desktop Applications" on the VMS
             operating system.




             Revision Information:         This is a revised manual.

             Operating System:             VMS V5.4

             Software Version:             VMS DECwindows V2.1 Language
                                           Variants, CBI "Introduction
                                           to DECwindows Systems" and
                                           CBI "FileView and Its Desktop
                                           Applications"





















             digital equipment corporation

 





             _____________________________________________
             October 1990

             The information in this document is subject to change without
             notice and should not be construed as a commitment by Digital
             Equipment Corporation. Digital Equipment Corporation assumes
             no responsibility for any errors that may appear in this
             document.

             The software described in this document is furnished under a
             license and may be used or copied only in accordance with the
             terms of such license.

             No responsibility is assumed for the use or reliability
             of software on equipment that is not supplied by Digital
             Equipment Corporation or its affiliated companies.

             Restricted Rights: Use, duplication, or disclosure by the
             U.S. Government is subject to restrictions as set forth in
             subparagraph (c)(1)(ii) of the Rights in Technical Data and
             Computer Software clause at DFARS 252.227-7013.

             The information in this document is subject to change without
             notice and should not be construed as a commitment by Digital
             Equipment Corporation. Digial Equipment Corporation assumes
             no responsibility for any erros that may appear in this
             document.

             The software described in this document is furnished under a
             license and may be used or copied only in accordance with the
             terms of such license.

             No responsibility is assumed for the use or reliability
             of software on equipment that is not supplied by Digital
             Equipment Corporation or its affilited companies.

              by Digital Equipment Corporation October 1990.

             All Rights Reserved.
             Printed in U.S.A.

             The postpaid READER'S COMMENTS form on the last page of this
             document requests the user's critical evaluation to assist in
             preparing future documentation.

             All Rights Reserved.
             Printed in U.K.

             The following are trademarks of Digital Equipment Corporation:

             CDA             LiveLink      VAXcluster
             DDIF            LN03          VAX RMS
             DEC             MASSBUS       VAXserver
             DECnet          MicroVAX      VAXstation
             DECUS           PrintServer   VMS
                             40
             DECwindows      Q-bus         VT
             DECwrite        ReGIS         XUI
             DEQNA           ULTRIX
             DIGITAL         UNIBUS
             GIGI            VAX           DIGITAL

             The following is a third-party trademark:

             PostScript is a registered trademark of Adobe Systems, Inc.

             Display PostScript is a registered trademark of Adobe
             Systems, Inc.

 















          ________________________________________________________________


                                                                  Contents




          1  Preparing to Install VMS DECwindows V2.1 Language
             Variants

                   Prerequisite Software...........................    1-2
                   Installation Procedure Requirements.............    1-2
                     Time .........................................    1-2
                     Privileges ...................................    1-2
                     Disk Space ...................................    1-3
                     VMSINSTAL Requirements .......................    1-4
                     Backing Up Your System Disk ..................    1-6
                     VMS DECwindows V2.1 Language Variant
                     Requirements.................................     1-6

          2  Installing VMS DECwindows V2.1 Language Variants

                   General Information.............................    2-1
                     Accessing the Online Release Notes ...........    2-1
                     Determining the Files Added to the System ....    2-2
                     Installation Verification Procedure (IVP) ....    2-2
                     Aborting the Installation ....................    2-3
                   The Installation Procedure......................    2-3
                     Invoking VMSINSTAL ...........................    2-3


                                                                       iii

 






                     Installation Questions .......................    2-5
                     Informational Messages .......................    2-7
                     Completing the Installation Procedure ........    2-9
                   Error Recovery..................................   2-10


          3  After Installing VMS DECwindows V2.1 Language Variants

                   Editing the System Startup File.................    3-1
                   Amending the LIBRARY.DECW$BOOKSHELF file........    3-3
                   Checking the Installation.......................    3-4
                   Invoking and Running a Language Variant.........    3-4
                   Determining and Reporting Problems..............    3-5


          4  Preparing to Install the German Language Variant of
             the CBI "Introduction to DECwindows Systems"

                   Hardware Requirements...........................    4-1
                   Software Requirements...........................    4-2


          5  Installing the German Language Variant of the CBI
             "Introduction to DECwindows Systems"

                   Running the Installation Procedure..............    5-1


          6  After Installing the German Language Variant of the
             CBI "Introduction to DECwindows Systems"

                   Editing the System Startup File.................    6-1
                   Checking the Installation.......................    6-2







          iv

 






          7  Preparing to Install the German Language Variant of
             the CBI "FileView and Its Desktop Applications"

                   Hardware Requirements...........................    7-1
                   Software Requirements...........................    7-1


          8  Installing the German Language Variant of the CBI
             "FileView and Its Desktop Applications"

                   Running the Installation Procedure..............    8-1


          9  After Installing the German Language Variant of the
             CBI "FileView and Its Desktop Applications"

                   Editing the System Startup File.................    9-1
                   Checking the Installation.......................    9-2


          A  Sample Installation

                     Sample Installation of the VMS DECwindows
                     V2.1 Language Variants.......................     A-1
                     Sample Installation of the CBI "Introduction
                     to DECwindows Systems".......................     A-4
                     Sample Installation of the CBI: "FileView and
                     Its Desktop Applications"....................     A-6

          B  Files and Logical Names Installed on Your System

                   Files and Logical Names Installed by the VMS
                   DECwindows V2.1 Language Variants...............    B-1
                     Directories ..................................    B-1
                     Files ........................................    B-3
                     Logical Names ................................    B-8
                   Files and Logical Names Installed by the CBI
                   "Introduction to DECwindows Systems"............   B-10


                                                                         v

 






                     Directory ....................................   B-10
                     Files ........................................   B-11
                     Logical Names ................................   B-11
                   Files and Logical Names Installed by the CBI
                   "FileView and Its Desktop Applications".........   B-12
                     Directory ....................................   B-12
                     Files ........................................   B-13
                     Logical Names ................................   B-16


          Index


          Tables

             1-1  Disk space requirements..........................    1-3

             2-1  Release Notes....................................    2-2

             2-2  Installation names...............................    2-3

             3-1  Parameter values.................................    3-2

             3-2  Language variant bookshelf files.................    3-3

             B-1  Directory values.................................    B-2

             B-2  New files installed (VMS DECwindows V2.1)........    B-4

             B-3  Logical name values..............................    B-9

             B-4  New files installed (CBI "Introduction to
                  DECwindows Systems").............................   B-11

             B-5  New files installed (CBI "FileView and Its
                  Desktop Applications")...........................   B-13




          vi

 























               ________________________________________________________________


                                                                        Preface




                  The VMS DECwindows V2.1 Language Variants are translated
                  versions of the VMS DECwindows V2.1 user interface, online
                  help and online documentation. The language variants are
                  installed on top of the American English version of VMS
                  DECwindows V2.1.

                  The following language variants are covered by this guide:

                     Dutch
                     French
                     French Canadian
                     German
                     Italian
                     Norwegian
                     Swedish
                     Swiss French
                     Swiss German
                     Swiss Italian











                                                                              v

 

















               Purpose of This Guide

                  This guide describes how to install the following three
                  products on the VMS operating system:

                   _ VMS DECwindows V2.1 Language Variants

                   _ The German Language Variant of the CBI "Introduction to

                     DECwindows Systems"

                   _ The German Language Variant of the CBI "FileView and Its

                     Desktop Applications"

                  You must read the whole guide before you start to install the
                  products.

                  The German Language Variant of the CBI (Computer Based
                  Instruction) "Introduction to DECwindows Systems" and the
                  CBI "Fileview and Its Desktop Applications" are computer-
                  based training programs covering the basic skills needed to
                  work with a DECwindows system. These skills are independent
                  of the specific Language Variant. However, the courses use
                  the terminology appearing in the German and Swiss German
                  Language Variant of VMS DECwindows. Also, the instruction
                  in the courses are in German. The courses are therefore best
                  suited for users working with the VMS DECwindows V2.1 German
                  or Swiss German Language Variant.

               Who Should Use This Guide

                  This guide is intended for VMS system managers or others
                  who are responsible for installing system software. To
                  install the VMS DECwindows V2.1 Language Variants and the
                  German Variants of the CBIs, you must have access to a
                  privileged account, such as the SYSTEM account. You must also
                  be familiar with the VMS installation procedure, VMSINSTAL.





               vi

 















                  Keep this document with your distribution kit. You will need
                  it if for any reason you have to reinstall any of the VMS
                  DECwindows V2.1 Language Variants, the CBI "Introduction
                  to DECwindows Systems" or the CBI "FileView and Its Desktop
                  Applications".




               Structure of This Guide

                  This guide has nine chapters and two appendices.

                  Chapter 1 describes the prerequisites and preparations for
                  the installation of VMS DECwindows V2.1 Language Variants.

                  Chapter 2 describes the installation procedure of VMS
                  DECwindows V2.1 Language Variants.

                  Chapter 3 describes what to do after the installation of VMS
                  DECwindows V2.1 Language Variants.

                  Chapter 4 describes the prerequisites and preparations for
                  the installation of CBI "Introduction to DECwindows Systems".

                  Chapter 5 describes the installation procedure of CBI
                  "Introduction to DECwindows Systems".

                  Chapter 6 describes what to do after the installation of CBI
                  "Introduction to DECwindows Systems".

                  Chapter 7 describes the prerequisites and preparations
                  for the installation of CBI "FileView and Its Desktop
                  Applications".

                  Chapter 8 describes the installation procedure of of CBI
                  "FileView and Its Desktop Applications".

                  Chapter 9 describes what to do after the installation of CBI
                  "FileView and Its Desktop Applications".

                  Appendix A lists the following three sample installation
                  procedures: a sample installation of VMS DECwindows
                  V2.1 Language Variants, a sample installation of the CBI
                  "Introduction to DECwindows Systems" and a sample installa-
                  tion of the CBI "FileView and Its Desktop Applications".

                                                                            vii

 















                  Appendix B lists the files and logical names which are
                  created on your system during the installation.

                  We recommend that you install a DECwindows Language Variant
                  first, followed immediately by the installation of the German
                  Language Variants of the CBIs.

                  However, the installations of the three products are
                  independent of each other. You may want to first install
                  a DECwindows Language Variant only, and postpone the
                  installation of the German Language Variants of the CBIs
                  until later.



               For More Information

                  For more information about installing products on VMS sys-
                  tems, refer to your processor-specific Installation/Operations
                  guide.

                  For more information about VMSINSTAL, refer to the VMS System
                  Manager's Manual.

                  For more information on DECwindows, refer to the following
                  manuals:

                   _ VMS DECwindows - Neue Funktionen in VMS DECwindows V2.1

                   _ VMS DECwindows - Einfhrung

                   _ VMS DECwindows - Benutzerhandbuch













               viii

 

















                                                                              1
               ________________________________________________________________

                     Preparing to Install VMS DECwindows V2.1 Language Variants




                  This chapter discusses the preparations and requirements for
                  installing the VMS DECwindows V2.1 Language Variants.

                  Your bill of materials (BOM) and indented bills report (BIL)
                  specify the number and contents of your media. Be sure to
                  verify the contents of your kit using this information. If
                  your kit is damaged, or if you find that parts of it are
                  missing, contact your Digital representative.

                  The VMS DECwindows V2.1 Language Variants provide online
                  Release Notes. Digital strongly recommends that you read the
                  Release Notes before proceeding with the installation. For
                  information on accessing the online Release Notes, refer to
                  Accessing the Online Release Notes.

                  You can install VMS DECwindows V2.1 Language Variants on a
                  standalone VAX and on a VAXcluster.

















                Preparing to Install VMS DECwindows V2.1 Language Variants  1-1

 











               Prerequisite Software

                  This section discusses the software you must have installed
                  on your system before you install any VMS DECwindows V2.1
                  Language Variants. The System Software Addendum (SSA)
                  contains a complete list of prerequisite software and the
                  required version numbers. The SSA is part of the Software
                  Product Description (SPD).

                  You must have VMS V5.4 and the American English version of
                  VMS DECwindows V2.1 installed and running on your system
                  before you install the VMS DECwindows V2.1 Language Variants.


               Note All VMS DECwindows V2.1 Language Variants run on VMS V5.4
                  releases only

               Installation Procedure Requirements

                  The following sections discuss various requirements for
                  installing the VMS DECwindows V2.1 Language Variants.

                  Time

                  The installation takes approximately 10 minutes, depending on
                  your type of media and your system configuration.

                  Privileges

                  To install the VMS DECwindows V2.1 Language Variants, you
                  must be logged in to an account that has SETPRV or at least
                  the following privileges:

                   _ CMKRNL

                   _ WORLD

                   _ SYSPRV

                  Note that VMSINSTAL turns off BYPASS privilege at the start
                  of the installation.







               1-2  Preparing to Install VMS DECwindows V2.1 Language Variants

 











                  Disk Space

                  Installing one of the VMS DECwindows V2.1 Language Variants
                  requires a certain amount of free disk storage space during
                  and after the installation. Table 1-1 summarizes the storage
                  requirements:

                  Table 1-1    Disk space requirements

                  _____________________________________________________________
                  Language         Blocks During         Blocks After
                  Variant_Kit______Installation__________Installation__________

                  Dutch            8,000                 8,000

                  French           8,000                 8,000

                  French Canadian  8,000                 8,000

                  German           8,000                 8,000

                  Italian          8,000                 8,000

                  Norwegian        8,000                 8,000

                  Swedish          8,000                 8,000

                  Swiss French     8,000                 8,000

                  Swiss German     8,000                 8,000

                  Swiss_Italian____8,000_________________8,000_________________
















                Preparing to Install VMS DECwindows V2.1 Language Variants  1-3

 











               To determine the number of free disk blocks on the current
               system disk, enter the following command at the DCL prompt:


                  $ SHOW DEVICE SYS$SYSDEVICE

                  VMSINSTAL Requirements

                  When you invoke VMSINSTAL, it checks the following:

                   _ Whether you have set your default device and directory to

                     SYS$UPDATE

                   _ Whether you are logged in to a privileged account

                   _ Whether you have adequate quotas for installation

                   _ Whether DECnet is running

                   _ Whether any users are logged in to the system

                  Note that VMSINSTAL requires the installation account to have
                  a minimum of the following quotas:

                     ASTLM = 24
                     BIOLM = 18
                     BYTLM = 18,000
                     DIOLM = 18
                     ENQLM = 30
                     FILLM = 20

                  Account quotas are stored in the file SYSUAF.DAT. Use the VMS
                  Authorize Utility to verify and change account quotas. First
                  set your directory to SYS$SYSTEM and then run AUTHORIZE:

                  $ SET DEFAULT SYS$SYSTEM
                  $ RUN AUTHORIZE
                  UAF>

                  At the UAF> prompt, use the SHOW command with an account name
                  to check a particular account. For example:

                  UAF> SHOW SYSTEM

                  To change a quota, use the MODIFY command. MODIFY has the
                  following format:

                               MODIFY account-name /quota-name=NNN

               1-4  Preparing to Install VMS DECwindows V2.1 Language Variants

 











                  The following example changes the FILLM quota for the SYSTEM
                  account and then exits from the utility:

                  UAF> MODIFY SYSTEM /FILLM=30
                  UAF> EXIT













































                Preparing to Install VMS DECwindows V2.1 Language Variants  1-5

 











                  After you exit from the utility, the system displays messages
                  indicating whether or not changes were made. Once the changes
                  have been made, you must log out and log in again for the new
                  quotas to take effect.

                  For more information on modifying account quotas, refer to
                  the description of the Authorize Utility in the VMS System
                  Management Documentation Subkit.

                  If VMSINSTAL detects any problems during the installation,
                  it notifies you and asks if you want to continue the
                  installation. In some instances, you can enter YES to
                  continue. To stop the installation process and correct the
                  situation, enter NO or press <Return> . Then correct the
                  problem and restart the installation.

                  Backing Up Your System Disk

                  At the beginning of the installation, VMSINSTAL asks if you
                  have backed up your system disk. Digital recommends that you
                  do a system disk backup before installing any software.

                  Use the backup procedures that are established at your site.
                  For details on performing a system disk backup, refer to the
                  section on the Backup Utility in the VMS System Management
                  Documentation Subkit.

                  VMS DECwindows V2.1 Language Variant Requirements

                  During the installation of VMS DECwindows V2.1 Language
                  Variants, the product checks that you have VMS V5.4 and the
                  American English version of VMS DECwindows V2.1 installed and
                  running on your system. If you do not have VMS V5.4 and VMS
                  DECwindows V2.1, an error message will be displayed and the
                  installation procedure will abort.

                  The product also checks that you have sufficient disk space
                  available for the installation. The disk space for each
                  language variant is listed in Table 1-1. If you do not have
                  enough disk space, an error message will be displayed and the
                  installation procedure will abort.







               1-6  Preparing to Install VMS DECwindows V2.1 Language Variants

 

















                                                                              2
               ________________________________________________________________

                               Installing VMS DECwindows V2.1 Language Variants




                  This chapter describes how to install VMS DECwindows V2.1
                  Language Variants.

                  The Installation Procedure contains a step-by-step descrip-
                  tion of the installation procedure.

               General Information

                  This section includes information about the following topics:

                   _ Accessing online Release Notes.

                   _ Determining which files have been added to your system

                   _ Aborting the installation.

                  Accessing the Online Release Notes

                  The VMS DECwindows V2.1 Language Variants provide online
                  Release Notes. You must specify OPTIONS N when you invoke
                  VMSINSTAL to see the question about online Release Notes.
                  This question comes near the beginning of the installation.
                  This is described in Invoking VMSINSTAL.

                  You must review the Release Notes in case they contain any
                  information about last minute changes in the installation
                  procedure. If you have already reviewed the Release Notes
                  during a previous installation, you do not need to specify
                  OPTIONS N.

                  Once the language variant has been installed, the Release
                  Notes are located in the directory SYS$HELP: in one of the
                  files listed in Table 2-1.

                          Installing VMS DECwindows V2.1 Language Variants  2-1

 











                  Table 2-1    Release Notes

                  _____________________________________________________________
                  Language
                  variant__________Release_Notes_file__________________________

                  Dutch            DECWNL_NL021.RELEASE_NOTES

                  French           DECWFR_FR021.RELEASE_NOTES

                  French Canadian  DECWFR_CA021.RELEASE_NOTES

                  German           DECWDE_DE021.RELEASE_NOTES

                  Italian          DECWIT_IT021.RELEASE_NOTES

                  Norwegian        DECWNO_NO021.RELEASE_NOTES

                  Swedish          DECWSV_SE021.RELEASE_NOTES

                  Swiss French     DECWFR_CH021.RELEASE_NOTES

                  Swiss German     DECWDE_CH021.RELEASE_NOTES

                  Swiss_Italian____DECWIT_CH021.RELEASE_NOTES__________________


                  Determining the Files Added to the System

                  During the installation, some directories and files are
                  created on your system. These directories and files are
                  listed in Appendix B.

                  Installation Verification Procedure (IVP)

                  The installation procedure for the VMS DECwindows V2.1 
		  Language Variants does not include an Installation 
		  Verification Procedure (IVP).

                  This is because the VMS DECwindows V2.1 Language Variants
                  consist only of the user interface, online help and online
                  documentation.

                  As there is no IVP, Digital recommends that you check after
                  the installation that the files have been installed correctly
                  and that the language variant runs correctly. Refer to
                  Checking the Installation and Invoking and Running a Language
                  Variant for more information.
               2-2  Installing VMS DECwindows V2.1 Language Variants

 











                  Aborting the Installation

                  To abort the installation procedure at any time, press
                  CTRL/Y. When you press CTRL/Y, the installation procedure
                  deletes all files it has created up to that point and exits.
                  You can then start the installation again.

               The Installation Procedure

                  The installation procedure consists of a series of questions
                  and informational messages.

                  Invoking VMSINSTAL

                  To start the installation, invoke the VMSINSTAL command
                  procedure from a privileged account, such as the SYSTEM
                  account. VMSINSTAL is in the SYS$UPDATE directory. You use
                  the following syntax to invoke VMSINSTAL:

                  @SYS$UPDATE:VMSINSTAL saveset-name device-name OPTIONS N

                  saveset-name
                  The installation name for the component. For the VMS
                  DECwindows V2.1 Language Variants, use the installation names
                  shown in Table 2-2.

                  Table 2-2    Installation names

                  _____________________________________________________________
                  Language
                  variant__________Installation_name___________________________

                  Dutch            DECWNL_NL021

                  French           DECWFR_FR021

                  French Canadian  DECWFR_CA021

                  German           DECWDE_DE021

                  Italian          DECWIT_IT021

                  Norwegian        DECWNO_NO021

                  Swedish          DECWSV_SE021

                                                       (continued on next page)

                          Installing VMS DECwindows V2.1 Language Variants  2-3

 











                  Table 2-2 (Cont.)    Installation names

                  _____________________________________________________________
                  Language
                  variant__________Installation_name___________________________

                  Swiss French     DECWFR_CH021

                  Swiss German     DECWDE_CH021

                  Swiss_Italian____DECWIT_CH021________________________________

                  device-name
                  The name of the device on which you plan to mount the media.
                  For example, MTA0: is a device name for a tape drive.

                  It is not necessary to use the console drive for this
                  installation. However, if you do use the console drive, once
                  the installation is complete, you should replace any media
                  you removed.

                  OPTIONS N
                  An optional parameter that indicates you want to see the
                  Release Notes question. If you do not include the OPTIONS
                  N parameter, VMSINSTAL does not ask you about the Release
                  Notes. You must review the Release Notes before proceeding
                  with the installation in case they contain new information
                  about the installation.

                  Note that there are several other options you can select
                  when you invoke VMSINSTAL. Refer to the VMS documentation
                  on software installation in the VMS System Management Subkit
                  for information on these options. If you specify more than
                  one option, separate the options with commas, for example,
                  OPTIONS A,N.

                  The following example invokes VMSINSTAL to install the Dutch
                  VMS DECwindows language variant from tape drive MTA0: and
                  shows the system response.









               2-4  Installing VMS DECwindows V2.1 Language Variants

 











                  $ @SYS$UPDATE:VMSINSTAL DECWNL_NL021 MTA0: OPTIONS N

                           VAX/VMS Software Product Installation Procedure V5.4


                     It is 16-SEP-1991 at 11:44.

                     Enter a question mark (?) at any time for help.

                  If you do not supply either the product name or the device
                  name, VMSINSTAL prompts you for this information later
                  in the installation procedure. If you do not specify any
                  installation options, VMSINSTAL also prompts you to enter
                  options.

                  Installation Questions

                  This section discusses the questions that appear during
                  the installation. Appendix A contains a sample installation
                  procedure which shows how the questions can be answered.

                  Each question in the installation is marked with an asterisk
                  (*) at the beginning of the line. Some questions show the
                  default response in brackets, for example [YES] or [Y]. To
                  use the default response, press <Return> .

                   1 System backup

                     VMSINSTAL asks if you are satisfied with your system
                     backup. You should always back up your system disk before
                     performing an installation. If you are satisfied with the
                     backup of your system disk, press <Return> . Otherwise,
                     enter NO to discontinue the installation. After you back
                     up your system disk, you can restart the installation.

                        * Are you satisfied with the backup of your system disk 
		          [YES]?

                   2 Options

                     If you did not specify any options on the command line,
                     VMSINSTAL asks you to enter the installation options
                     you want to use. Press <Return> if you do not want any
                     options.

                        * Enter installation options you wish to use (none):


                          Installing VMS DECwindows V2.1 Language Variants  2-5

 











                   3 Mounting the media

                     You must now mount the first distribution volume on the
                     device you specified when you invoked VMSINSTAL. The
                     device name appears in the line preceding the question.
                     VMSINSTAL then asks you if you are ready to continue with
                     the installation.

                     If you respond YES, to indicate that you are ready,
                     VMSINSTAL displays a message that the media containing
                     the language variant has been mounted on the specified
                     device and that the installation has begun. For example:

                        Please mount the first volume of the set on MTA0:.
                        * Are you ready? YES
                        %MOUNT-I-MOUNTED, DECWNL_NL021 MOUNTED ON _$$MTA0:
                        The following products will be processed:
                          DECWNL_NL V2.1

                            Beginning installation of DECWNL_NL V2.1 at 11:45

                        %VMSINSTAL-I-RESTORE, Restoring product saveset A...

                     If you entered the wrong device name when you invoked
                     VMSINSTAL and need to restart the installation, enter NO
                     in response to the "Are you ready?" question. To abort the
                     installation for other reasons, press CTRL/Y.

                   4 Release Notes

                     If you specified OPTIONS N when you invoked VMSINSTAL or
                     when VMSINSTAL prompted you to enter an option, you are
                     now asked to choose one of the four options for reviewing
                     the Release Notes.

                     Release notes included with this kit are always copied
		     to SYS$HELP.

                        Additional Release Notes Options:

                         1.  Display release notes
                         2.  Print release notes
                         3.  Both 1 and 2
                         4.  None of the above

                        * Select option [2]:



               2-6  Installing VMS DECwindows V2.1 Language Variants

 











                     If you select option 1, VMSINSTAL displays the Release
                     Notes immediately on the console terminal. You can
                     terminate the display at any time by pressing CTRL/C.

                     If you select option 2, VMSINSTAL prompts you for the name
                     of the print queue that you want to use:

                        * Queue name [SYS$PRINT]:

                     You can press <Return> to send the file to the default
                     output print device or you can enter another queue name.

                     If you select option 3, VMSINSTAL displays the Release
                     Notes immediately on the console terminal and then prompts
                     you for a queue name for the printed version.

                     Select option 4 if you have already reviewed the Release
                     Notes and are restarting the installation.

                   5 Continuing the installation

                     The installation procedure now asks if you want to
                     continue the installation. To continue, enter YES.
                     Otherwise, press <Return> . In either case, the Release
                     Notes are copied to a file in the SYS$HELP directory. For
                     example:

                        * Do you want to continue the installation [NO]?: YES
                        %VMSINSTAL-I-RELMOVED, The product's release notes have-
                        _been successfully moved to SYS$HELP.
                        %DECWNL_NL-I-INTRO, Installing VMS DECwindows Dutch- 
                        _language support.

                     The Release Notes for each language variant are located
                     in one of the files listed in Table 2-1 in Accessing the
                     Online Release Notes.

                   6 Choosing to purge files

                     You have the option to purge files from any previous
                     versions of VMS DECwindows Language Variants that are
                     superseded by this installation. Purging is recommended;
                     however, if you need to keep files from the previous
                     version, enter NO in response to the question.

                        * Do you want to purge files replaced by this 
			  installation [YES]?


                          Installing VMS DECwindows V2.1 Language Variants  2-7

 











                  Informational Messages

                  At this point, the installation procedure displays a number
                  of informational messages that report on the progress of the
                  installation. The installation procedure does not ask any
                  further questions.

                  If the installation procedure has been successful up to this
                  point, VMSINSTAL moves the new or modified files to their
                  target directories, updates help files, and updates DCL
                  tables, if necessary. If you chose to have files purged,
                  that work is done now.




































               2-8  Installing VMS DECwindows V2.1 Language Variants

 











               The following messages are displayed:

                     %DECWNL_NL-I-NOMORE, No more questions will be asked.
                     %DECWNL_NL-I-TIME, This installation will take- 
		     _approximately 10 minutes
                     %VMSINSTAL-I-RESTORE, Restoring product save set B ...
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[DECW$DEFAULTS.SYSTEM.NL_NL]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
	             _directory VMI$ROOT:[SYSHLP.NL_NL]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[SYSHLP.EXAMPLES.NL_NL]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[SYSLIB.NL_NL]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[SYSMSG.NL_NL]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[VUE$LIBRARY.SYSTEM.NL_NL]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk-
	             _directory VMI$ROOT:[DECW$DEFAULTS.USER.NL_NL]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk-
	             _directory VMI$ROOT:[VUE$LIBRARY.USER.NL_NL]
                     %VMSINSTAL-I-MOVEFILES, files will now be moved to their-
                     _target directories...

                  Completing the Installation Procedure

                  The following messages indicate that the entire installation
                  procedure is complete:

                        Installation of DECWNL_NL V2.1 completed at 11:55

                        VMSINSTAL procedure done at 11:55

                  You can now install the CBIs. For more information refer to
                  Chapter 4 or Chapter 7 or log out of the privileged account:

                     $ LOGOUT
                     SYSTEM     logged out at 16-SEP-1991 11:57:24.14









                          Installing VMS DECwindows V2.1 Language Variants  2-9

 











                  Note that VMSINSTAL deletes or changes entries in the process
                  symbol tables during the installation. Therefore, if you are
                  going to continue using the system manager's account and you
                  want to restore these symbols, you must log out and log in
                  again.

               Error Recovery

                  If errors occur during the installation, VMSINSTAL displays
                  failure messages. If the installation fails, you see the
                  following message:

                     %VMSINSTAL-E-INSFAIL, The installation of DECWNL_NL V2.1-
		     _has failed.

                  Errors can occur during the installation if any of the
                  following conditions exist:

                   _ The operating system version is incorrect

                   _ Disk space necessary for successful installation is

                     insufficient

                   _ Quotas necessary for successful installation are

                     insufficient

                   _ System parameter values for successful installation are

                     insufficient

                   _ The VMS help library is currently in use

                  For descriptions of the error messages generated by these
                  conditions, refer to the VMS documentation on system
                  messages, recovery procedures, and VMS software installation.
                  If you are notified that any of these conditions exist,
                  you should take the appropriate action as described in
                  the message. (You might need to change a system parameter
                  or increase an authorized quota value.) For information on
                  installation requirements, refer to Chapter 1.






               2-10  Installing VMS DECwindows V2.1 Language Variants

 

















                                                                              3
               ________________________________________________________________

                         After Installing VMS DECwindows V2.1 Language Variants




                  After installing a language variant, you must perform the
                  following tasks:

                   _ Edit the system startup file

                   _ Amend the LIBRARY.DECW$BOOKSHELF file

                   _ Check the installation

                   _ Run the language variant

               Editing the System Startup File

                  You must edit the system startup file to provide for
                  automatic startup of VMS DECwindows V2.1 Language Variants
                  when your system is rebooted.

                  Add the command line that starts the language variant to the
                  system startup file, SYS$MANAGER:SYSTARTUP_V5.COM.

                  The VMS DECwindows V2.1 Language Variants cannot start until
                  after the network has started. You must put this new command
                  line after the line that invokes the network startup command
                  procedure.

                  The following example shows the startup command lines for the
                  network followed by the VMS DECwindows V2.1 Language Variants
                  startup command line:

                     $ @SYS$MANAGER:STARTNET.COM
                          .
                          .
                     $ @SYS$MANAGER:DECW$STARTI18N.COM parameter1 parameter2

                    After Installing VMS DECwindows V2.1 Language Variants  3-1

 











                  parameter1
                  This is the list of all the language variants which are
                  available on the system. If you specify more than one
                  language variant, you must separate the variants with commas.
                  Table 3-1 shows the possible values for this parameter.

                  Table 3-1    Parameter values

                  _____________________________________________________________
                  Language
                  variant__________Parameter_values____________________________

                  Dutch            NL_NL

                  French           FR_FR

                  French Canadian  FR_CA

                  German           DE_DE

                  Italian          IT_IT

                  Norwegian        NO_NO

                  Swedish          SV_SE

                  Swiss French     FR_CH

                  Swiss German     DE_CH

                  Swiss_Italian____IT_CH_______________________________________

                  It is not necessary to include English in the list of
                  language variant parameters.

                  parameter2
                  This is an optional parameter which defines a system-wide
                  default language variant for all users. You cannot specify
                  more than one value for this parameter. Table 3-1 shows the
                  possible values for this parameter.








               3-2  After Installing VMS DECwindows V2.1 Language Variants

 











               Amending the LIBRARY.DECW$BOOKSHELF file

                  You must include a reference to the translated language
                  version of the online book Using the Bookreader in the main
                  library bookshelf file. The main library bookshelf file is
                  called LIBRARY.DECW$BOOKSHELF and it is in the directory
                  SYS$COMMON:[DECW$BOOK].

                  This does not apply to the Norwegian language variant, which
                  has no translated online documentation.

                  To include the reference to Using the Bookreader in the file
                  LIBRARY.DECW$BOOKSHELF, follow these instructions:

                  Use the DCL APPEND command to append the file which contains
                  the reference to the appropriate language version of Using
                  the Bookreader to the file LIBRARY.DECW$BOOKSHELF. For more
                  information about the APPEND command, refer to the VMS DCL
                  Dictionary.

                  Table 3-2 lists the file for each language variant which
                  contains the reference to Using the Bookreader. This file is
                  in the directory SYS$COMMON:[DECW$BOOK].

                  Table 3-2    Language variant bookshelf files

                  _____________________________________________________________
                  Language
                  variant__________File_name___________________________________

                  Dutch            DECWNL_NL021BOOKREADER.DECW$BOOKSHELF

                  French           DECWFR_FR021BOOKREADER.DECW$BOOKSHELF

                  French Canadian  DECWFR_CA021BOOKREADER.DECW$BOOKSHELF

                  German           DECWDE_DE021BOOKREADER.DECW$BOOKSHELF

                  Italian          DECWIT_IT021BOOKREADER.DECW$BOOKSHELF

                  Norwegian        No translated online documentation available

                  Swedish          DECWSV_SE021BOOKREADER.DECW$BOOKSHELF

                  Swiss French     DECWFR_CH021BOOKREADER.DECW$BOOKSHELF

                                                       (continued on next page)

                    After Installing VMS DECwindows V2.1 Language Variants  3-3

 











                  Table 3-2 (Cont.)    Language variant bookshelf files

                  _____________________________________________________________
                  Language
                  variant__________File_name___________________________________

                  Swiss German     DECWDE_CH021BOOKREADER.DECW$BOOKSHELF

                  Swiss_Italian____DECWIT_CH021BOOKREADER.DECW$BOOKSHELF_______

               Checking the Installation

                  To make sure that the language variant has installed
                  successfully, check that all the necessary files are
                  installed on your system in the correct directories. The
                  files are listed in Files.

                  If all the files are in the correct directories, invoke and
                  run the language variant according to the instructions in
                  Invoking and Running a Language Variant.

                  If all the files listed in Files are not installed, or if
                  your language variant does not run correctly, report this to
                  Digital. Refer to Determining and Reporting Problems for more
                  information.

               Invoking and Running a Language Variant

                  If you did not specify a system-wide default language
                  variant (parameter2) on the startup command line in the file
                  SYS$MANAGER:SYSTARTUP_V5.COM, you must tell all users how to
                  start up the language variant which you have installed. Refer
                  to Editing the System Startup File for more information on
                  the startup command line.

                  To start up the language variant, each user must do the
                  following:

                   1 Choose Language... from the Session Manager's Customize
                     menu.

                     The Session Manager displays the Customize Language dialog
                     box.

                   2 Scroll through the list of languages and choose the
                     language which corresponds to the language variant
                     installed.

               3-4  After Installing VMS DECwindows V2.1 Language Variants

 











                     The next application which the user starts is displayed in
                     the selected language. If the application is not available
                     on your system in the selected language, it is displayed
                     in American English.

                   3 Choose Save Current Settings from the Session Manager's
                     Customize menu.

                     When the user starts a new DECwindows session, the
                     DECwindows environment will appear in the selected
                     language.

               Determining and Reporting Problems

                  If you encounter a problem while using VMS DECwindows V2.1
                  Language Variants, report it to Digital. Depending on the
                  nature of the problem and the type of support you have, you
                  can take one of the following actions:

                   _ Call Digital if your software contract or warranty

                     agreement entitles you to telephone support.

                   _ Submit a Software Performance Report (SPR).

                   _ Fill out and submit a Reader's Comments form if the prob-

                     lem has to do with the VMS DECwindows V2.1 documentation.
                     There are Reader's Comments forms at the back of each
                     manual. Use the form from the manual in which you found
                     the error. Include the section and page number.

                  Review the Software Product Description (SPD) and Warranty
                  Addendum for an explanation of warranty. If you encounter
                  a problem during the warranty period, report the problem as
                  indicated above or follow alternate instructions provided by
                  Digital for reporting SPD nonconformance problems.











                    After Installing VMS DECwindows V2.1 Language Variants  3-5


 

















                                                                              4
               ________________________________________________________________

                    Preparing to Install the German Language Variant of the CBI
                                           "Introduction to DECwindows Systems"




                  Before installing the German language variant of the CBI
                  "Introduction to DECwindows Systems" make sure that your
                  system has the hardware and software configuration required
                  to run the course, and that the complete installation kit for
                  the course is available.

               Hardware Requirements

                  The German language variant of the CBI "Introduction to
                  DECwindows Systems" can be installed on any VAX system.
                  However, the course can only be run from a VAX system that
                  supports the DECwindows graphics interface.

                  The course runs on both monochrome and color systems. Color
                  support is not required.

                  To install the course, the system must have at least 2000
                  blocks of free disk space.

                  Although the course can run on a system with 6 MB of memory,
                  the system should have at least 9 MB of memory for good
                  performance.

                  The system on which the course runs may be a standalone
                  system or a member of a VAXcluster configuration.

                  Users are expected to use a standard three-button mouse.
                  Users who are using a graphics tablet should understand the
                  difference between a relative pointing device, such as a
                  mouse, and an absolute pointing device, such as the puck or
                  stylus used with graphics tablets.


				  CBI "Introduction to DECwindows Systems"  4-1

 











               Software Requirements

                  To run the course, the VMS Version 5.4 operating system must
                  be installed and running properly on your system.

                  The course uses the following components of the DECwindows
                  software, which are installed as a part of the VMS Version
                  5.4 operating system:

                   _ Session Manager

                   _ Window Manager

                   _ DECterm Terminal Emulator

                   _ FileView

                   _ Notepad

                   _ Clock

                  Since the instruction in the CBI uses the terminology of the
                  German Language Variant of DECwindows, it is best if this
                  Variant is also installed on the system. However, this is not
                  a prerequisite for either installing or running the CBI.























               4-2  CBI "Introduction to DECwindows Systems"

 

















                                                                              5
               ________________________________________________________________

                Installing the German Language Variant of the CBI "Introduction
                                                         to DECwindows Systems"




                  To install the German language variant of the CBI 
		  "Introduction to DECwindows Systems" you must log in to a 
		  privileged account. The account must have at least the 
		  following privileges:

                   _ SYSPRV

                   _ SYSNAM

                   _ TMPMBX

                   _ NETMBX

                  The SYSTEM account satisfies this requirement.

               Running the Installation Procedure

                  After you have logged in to a privileged account you can
                  run the course installation procedure. This procedure takes
                  approximately 10-15 minutes and performs the following
                  operations:

                   _ Installs the course files on a specified disk.

                  Caution If a version of the CBI "Introduction to DECwindows
                     Systems" has been installed on the specified disk already
                     (for example the English Language Variant) the previous
                     version will be replaced by the new installation. If you
                     want to keep the previous version of the CBI, you should
                     specify a different disk.



				  CBI "Introduction to DECwindows Systems"  5-1

 











                   _ Presents the option of adding an item that starts the
                     course to the FileView Applications menu. Doing this
                     enables users to start the course easily by choosing that
                     item from the menu.

                   _ Defines the following logical names which are required to
                     run the course:

                        DECW$CBI
                        DECW$CBI_SUPPORT

                     If the course is being installed on a VAXcluster
                     configuration, the installation procedure presents the
                     option of automatically defining those logical names on
                     all members of the cluster.

               Note If a version of the CBI "Introduction to DECwindows
                  Systems" had already been installed, and you did not replace
                  it by the new installation, you will have to redefine these
                  logical names to their original values in order to access the
                  previous version of the CBI.

                  Use the following steps to install the German language
                  variant of the CBI "Introduction to DECwindows Systems"
                  software:

                   1 Use the SHOW DEVICE command to check the system disk
                     space. Read the resulting display to make sure there are
                     at least 2000 blocks free on the system disk. (If you plan
                     to install the course on a different disk, execute the
                     same command using that device name to ensure that this
                     disk has the necessary 2000 blocks free.)

                        $ SHOW DEVICE SYS$SYSDEVICE

                   2 Invoke the VMSINSTAL command procedure. Use DECWCBIDE_
                     DE021 as the name of the product, and specify the
                     device from which you are installing the course. The
                     installation kit for the German Language Variant of the
                     CBI "Introduction to DECwindows Systems" is on the same
                     tape as the German or Swiss German Language Variant of VMS
                     DECwindows.

                     In this example, MTA0: is used to specify the tape drive.
                     You may need to specify a different device.

                        $ @SYS$UPDATE:VMSINSTAL DECWCBIDE_DE021 MTA0:

               5-2  CBI "Introduction to DECwindows Systems"

 











                     A set of status messages display:

                        VAX/VMS Software Product Installation Procedure V5.4

                        It is 25-MAR-1991 at 14:23.

                        Enter a question mark (?) at any time for help.
                        * Are you satisfied with the backup of your system 
			  disk [YES]?

                   3 Press <Return> to answer YES.

                     The following message and question display:

                        Please mount the first volume of the set on  MTA0:
                        * Are you ready?

                   4 Place the tape containing the CBI software in the device
                     drive and put the device online. The CBI software is
                     contained on the same tape as the VMS DECwindows German or
                     Swiss German Language Variant Software.

                     When the tape is in place, enter:

                        YES

                     The following messages display:

                        %MOUNT-I-MOUNTED, DECWDE mounted on _MARVIN$MTA0:
                        The following products will be processed:
                          DECWCBIDE_DE V2.1

                         Beginning installation of DECWCBIDE_DE V2.1 at 14:28

                        %VMSINSTAL-I-RESTORE, Restoring product save set A ...

                  Note If you specified OPTIONS N when invoking VMSINSTAL the
                     following message displays:

                        %VMSINSTAL-W-NOFILE, New file *.RELEASE_NOTES does not-
			_exist.
                        %VMSINSTAL-W-NORELNOTE, Unable to locate release notes.

                     This message means that there are no release notes with
                     CBI "Introduction to DECwindows Systems". To continue
                     the installation procedure enter YES upon the following
                     question:

				  CBI "Introduction to DECwindows Systems"  5-3

 











                        * Do you want to continue the installation [NO]? YES

                   5 The following messages display:

                        ----------------------
                                  Starting the installation of
                               German Language Version of the CBI
                         Introduction to DECwindows Systems - Version 2.1
                                Computer-Based Instruction (CBI)

                        To stop the installation at any time, enter CTRL/Y.

                                 *  *  *  *  *  *  *  *  *  *


                        You may specify the logical or physical name of the
                        disk on which you wish to install the CBI.  If you
                        do not specify a disk, the CBI files will be placed
                        in SYS$COMMON:[SYSCBI.DECW_SYSTEMS_CBI] by default.

                        Press Return to use the default,
                        or enter a disk name:

                   6 Press <Return> to store the CBI files on SYS$COMMON.

                     If you prefer to use a different disk, enter the logical
                     or physical name for that device. This causes a top level
                     directory [DECW_SYSTEMS_CBI] to be created on that disk.

                  Caution If a version of the CBI "Introduction to DECwindows
                     Systems" has been installed on the specified disk already,
                     for example the English Language Variant, the previous
                     version will be replaced by the new installation. If you
                     want to keep the previous version of the CBI, you should
                     specify a different disk.

                     The following messages appear:

                        -----------------------
                        %VMSINSTAL-I-RESTORE, Restoring product save set B ...

                        %VMSINSTAL-I-SYSDIR, This product creates system disk- 
	                _directory VMI$ROOT:[SYSCBI.DECW_SYSTEMS_CBI].

                        * Do you want to add the course to the FileView 
			  Applications menu [YES]? YES


               5-4  CBI "Introduction to DECwindows Systems"

 











                   7 Press <Return> to answer YES.

                     This response causes the following message to display:

                        Added 'Lernprogramm' to the FileView Applications menu.

                     Adding the course to the FileView Anwendungen menu at the
                     system level enables all users to easily start the course
                     by choosing the "Lernprogramm" item from the Anwendungen
                     menu in the German or Swiss German FileView window. Users
                     who do not want the course on their menu can remove it
                     easily on an individual basis.

                     If you do not want the course added to the FileView
                     Anwendungen menu for all users, type: NO and press
                     <Return> . Users who want to access the course from a menu
                     will then need to add it to their FileView Anwendungen
                     menu on an individual basis.

                     For more information on adding an application to or
                     removing it from the FileView Anwendungen menu, refer
                     to the DECwindows Documentation Sets.

                     As the installation continues, the following message
                     signals when the logical names required to run the course
                     are assigned for the system you are currently using.

                        Assigning logical names required to run CBI.

                     If your system is a member of a VAXcluster configuration,
                     the following message and prompt also displays:

                        This system is a member of a VAXcluster configuration.

                        * Do you wish to assign the logical names required to 
			  run the CBI on all members of the cluster  [YES]?

                   8 Press <Return> to answer YES.

                     This response causes the following messages to display:








				  CBI "Introduction to DECwindows Systems"  5-5

 











                        Assigning logical names required to run CBI on all 
		        members of the cluster.
                        %SYSMAN-I-ENV, current command environment:
                         Clusterwide on local cluster
                         Username SYSTEM will be used on nonlocal nodes

                        %SYSMAN-I-OUTPUT, command execution on node NODEX
                        %SYSMAN-I-OUTPUT, command execution on node NODEY
                        %SYSMAN-I-OUTPUT, command execution on node NODEZ
                        .
                        .
                        .

                     If you do not want the logical names assigned for all
                     members of your cluster, type: NO and press <Return> . The
                     other members of the cluster will then need to be rebooted
                     in order to run the course.

                     As the installation continues, the following message
                     displays:

                                       -----------------------
                                    *** IMPORTANT INFORMATION ***

                         The following line must be added to your system 
			 startup file,
                         SYS$MANAGER:SYSTARTUP_V5.COM

                         $ @SYS$MANAGER:DECW$CBI_STARTUP.COM

                         To run the course from a DECterm window, enter the 
			 following command at the DCL prompt:  RUN DECW$CBI

                                       -----------------------

                        %VMSINSTAL-I-MOVEFILES, Files will now be moved to- 
			_their target directories...
                         Installation of DECWCBIDE_DE V2.1 completed at 14:34

                         VMSINSTAL procedure done at 14:34

                        $

                   9 When the DCL prompt appears, the VMSINSTAL procedure is
                     finished. You can now install the CBI "FileView and Its
                     Desktop Applications" or remove the installation media
                     from the tape drive.

               5-6  CBI "Introduction to DECwindows Systems"

 

















                                                                              6
               ________________________________________________________________

                        After Installing the German Language Variant of the CBI
                                           "Introduction to DECwindows Systems"




                  After installing the German language variant of the CBI
                  "Introduction to DECwindows Systems" you need to edit the
                  system startup file, and you should check whether the course
                  is running properly.



               Editing the System Startup File

                  Edit SYS$MANAGER:SYSTARTUP_V5.COM to add the following line:

                     $ @SYS$MANAGER:DECW$CBI_STARTUP.COM

                  If the course was installed on a VAXcluster configuration,
                  you need to edit the system startup file of every member
                  of the cluster from which you want to be able to access the
                  course.

                  If you forget to do this, the logical names required to run
                  the course will not be assigned the next time you boot the
                  system. When you try to run the course, an error message
                  similar to the following will be displayed:

                     %DCL-W-ACTIMAGE, error activating image DECWCBI-
                     -CLI-E-IMAGEFNF, image file not found- 
                     _$DISK1:[JONES]DECWCBI.EXE;







				  CBI "Introduction to DECwindows Systems"  6-1

 











               Checking the Installation

                  To test the installation of the course, try running it from
                  the DCL prompt in a DECterm window.

               Note You can only run the course on a DECwindows workstation.

                  The following command starts the course from a DECterm
                  window:

                     $ RUN DECW$CBI

                  If the course is properly installed, a window labeled
                  Lernprogramm: Einfhrung in DECwindows displays the title
                  page of the course and instructions on how to proceed.

































               6-2  CBI "Introduction to DECwindows Systems"

 

















                                                                              7
               ________________________________________________________________

                    Preparing to Install the German Language Variant of the CBI
                                        "FileView and Its Desktop Applications"




                  Before installing the German language variant of the CBI
                  "FileView and Its Desktop Applications" make sure that your
                  system has the hardware and software configuration required
                  to run the course, and that the complete installation kit for
                  the course is available.

               Hardware Requirements

                  The German language variant of the CBI "FileView and Its
                  Desktop Applications" can be installed on any VAX system that
                  supports the DECwindows graphics interface.

                  The course runs on both monochrome and color systems. Color
                  support is not required.

                  To install the course, the system must have at least 14500
                  blocks of free disk space.

                  Although the course can run on a system with 6 MB of memory,
                  the system should have at least 9 MB of memory for good
                  performance.

                  The system on which the course runs may be a standalone
                  system or a member of a VAXcluster configuration.

               Software Requirements

                  To run the course, the VMS Version 5.4 operating system must
                  be installed and running properly on your system.

                  The course uses the following components of the DECwindows
                  software, which are installed as a part of the VMS Version
                  5.4 operating system:

				CBI "FileView and Its Desktop Applications" 7-1

 











                   _ Session Manager

                   _ FileView

                   _ Bookreader

                   _ Calculator

                   _ Calendar

                   _ Cardfiler

                   _ CDA Viewer

                   _ Clock

                   _ Mail

                   _ Notepad

                   _ Paint

                  Since the instruction in the CBI uses the terminology of the
                  German Language Variant of DECwindows, it is best if this
                  Variant is also installed on the system. However, this is not
                  a prerequisite for either installing or running the CBI.






















               7-2  CBI "FileView and Its Desktop Applications"

 

















                                                                              8
               ________________________________________________________________

                Installing the German Language Variant of the CBI "FileView and
                                                      Its Desktop Applications"




                  To install the German language variant of the CBI "FileView
                  and Its Desktop Applications" you must log in to a privileged
                  account. The account must have at least the following
                  privileges:

                   _ OPER

                   _ SYSNAM

                   _ TMPMBX

                   _ NETMBX

                  The SYSTEM account satisfies this requirement.

               Running the Installation Procedure

                  After you have logged in to a privileged account you can
                  run the course installation procedure. This procedure takes
                  approximately 10-15 minutes and performs the following
                  operations:

                   _ Installs the course files on a specified disk.

                  Caution If a version of the CBI "FileView and Its Desktop
                     Applications" has been installed on the specified disk
                     already (for example the English Language Variant) the
                     previous version will be replaced by the new installation.
                     If you want to keep the previous version of the CBI, you
                     should specify a different disk.



				CBI "FileView and Its Desktop Applications" 8-1

 











                   _ Presents the option of adding an item, 
		     FileView Lernprogramm,
		     to the FileView Applications menu that starts the course.
                     Doing this enables users to start the course easily by
                     choosing that item from the menu.

                   _ Defines the following logical names which are required to

                     run the course:

                        CBI$PRACTICE
                        DECWVUE$CBI
                        DECWVUE$CBI_SUPPORT

                     If the course is being installed on a VAXcluster
                     configuration, the installation procedure presents the
                     option of automatically defining those logical names on
                     all members of the cluster.

               Note If a version of the CBI "Introduction to DECwindows
                  Systems" had already been installed, and you did not replace
                  it by the new installation, you will have to redefine these
                  logical names to their original values in order to access the
                  previous version of the CBI.
























               8-2  CBI "FileView and Its Desktop Applications"

 











                  Use the following steps to install the German language
                  variant of the CBI "FileView and Its Desktop Applications"
                  software:

                   1 Use the SHOW DEVICE command to check the system disk
                     space. Read the resulting display to make sure there are
                     at least 14500 blocks free on the system disk. (If you
                     plan to install the course on a different disk, execute
                     the same command using that device name to ensure that
                     this disk has the necessary 14500 blocks free.)

                        $ SHOW DEVICE SYS$SYSDEVICE

                   2 Invoke the VMSINSTAL command procedure. Use VUECBIDE_DE021
                     as the name of the product, and specify the device from
                     which you are installing the course. The installation kit
                     for the German Language Variant of the CBI "FileView and
                     Its Desktop Applications" Systems" is on the same tape
                     as the German or Swiss German Language Variant of VMS
                     DECwindows.

                     In this example, MTA0: is used to specify the tape drive.
                     You may need to specify a different device.

                        $ @SYS$UPDATE:VMSINSTAL VUECBIDE_DE021 MTA0:

                     A set of status messages display:

                        VAX/VMS Software Product Installation Procedure V5.4

                        It is 25-MAR-1991 at 14:23.

                        Enter a question mark (?) at any time for help.
                        * Are you satisfied with the backup of your system 
		          disk [YES]?

                   3 Press <Return> to answer YES.

                     The following message and question display:

                        Please mount the first volume of the set on  MTA0:
                        * Are you ready?

                   4 Place the tape containing the CBI software in the device
                     drive and put the device online. The CBI software is
                     contained on the same tape as the VMS DECwindows German or
                     Swiss German Language Variant Software.
 
				CBI "FileView and Its Desktop Applications" 8-3

 











                     When the tape is in place, enter:

                        YES

                     The following messages display:

                        %MOUNT-I-MOUNTED, DECWDE mounted on _MARVIN$MTA0:
                        The following products will be processed:
                          VUECBIDE_DE V2.1

                         Beginning installation of VUECBIDE_DE V2.1 at 14:28

                        %VMSINSTAL-I-RESTORE, Restoring product save set A ...

                  Note If you specified OPTIONS N when invoking VMSINSTAL the
                     following message displays:

                        %VMSINSTAL-W-NOFILE, New file *.RELEASE_NOTES does not-
			_exist.
                        %VMSINSTAL-W-NORELNOTE, Unable to locate release notes.

                     This message means that there are no release notes with
                     CBI "FileView and Its Desktop Applications". To continue
                     the installation procedure enter YES upon the following
                     question:

                        * Do you want to continue the installation [NO]? YES





















               8-4  CBI "FileView and Its Desktop Applications"

 











                   5 The following messages display:

                        ----------------------
                                    Starting the installation of
                                 German Language Version of the CBI
                           FileView and Its Desktop Applications - Version 2.1
                                  Computer-Based Instruction (CBI)

                          To stop the installation at any time, enter CTRL/Y.

                                   *  *  *  *  *  *  *  *  *  *


                          You may specify the logical or physical name of the
                          disk on which you wish to install the CBI.  If you
                          do not specify a disk, the CBI files will be placed
                          in SYS$COMMON:[SYSCBI.DECW_VUE_CBI] by default.

                          Press Return to use the default,
                          or enter a disk name:

                   6 Press <Return> to store the CBI files on SYS$COMMON.

                     If you prefer to use a different disk, enter the logical
                     or physical name for that device. This causes a top level
                     directory [DECW_VUE_CBI] to be created on that disk.

                  Caution If a version of the CBI "FileView and Its Desktop
                     Applications" has been installed on the specified disk
                     already, for example the English Language Variant, the
                     previous version will be replaced by the new installation.
                     If you want to keep the previous version of the CBI, you
                     should specify a different disk.

                     The following messages appear:

                        -----------------------
                        %VMSINSTAL-I-RESTORE, Restoring product save set B ...

                        %VMSINSTAL-I-SYSDIR, This product creates system disk- 
                        _directory VMI$ROOT:[SYSCBI.DECW_VUE_CBI].

                        * Do you want to add the course to the FileView 
		          Applications menu [YES]? YES

                   7 Press <Return> to answer YES.


				CBI "FileView and Its Desktop Applications" 8-5

 











                     This response causes the following message to display:

                        Added ' FileView Lernprogramm' to the FileView 
			Applications menu.

                     Adding the course to the FileView Anwendungen menu at the
                     system level enables all users to easily start the course
                     by choosing the "FileView Lernprogramm" item from the
                     Anwendungen menu in the German or Swiss German FileView
                     window. Users who do not want the course on their menu can
                     remove it easily on an individual basis.

                     If you do not want the course added to the FileView
                     Anwendungen menu for all users, type: NO and press
                     <Return> . Users who want to access the course from a menu
                     will then need to add it to their FileView Anwendungen
                     menu on an individual basis.

                     For more information on adding an application to or
                     removing it from the FileView Anwendungen menu, refer
                     to the DECwindows Documentation Sets.

                     As the installation continues, the following message
                     signals when the logical names required to run the course
                     are assigned for the system you are currently using.

                        Assigning logical names required to run CBI.

                     If your system is a member of a VAXcluster configuration,
                     the following message and prompt also displays:

                        This system is a member of a VAXcluster configuration.

                        * Do you wish to assign the logical names required to 
			  run the CBI on all members of the cluster  [YES]?

                   8 Press <Return> to answer YES.

                     This response causes the following messages to display:









               8-6  CBI "FileView and Its Desktop Applications"

 











                        Assigning logical names required to run CBI on all 
			members of the cluster.
                        %SYSMAN-I-ENV, current command environment:
                         Clusterwide on local cluster
                         Username SYSTEM will be used on nonlocal nodes

                        %SYSMAN-I-OUTPUT, command execution on node NODEX
                        %SYSMAN-I-OUTPUT, command execution on node NODEY
                        %SYSMAN-I-OUTPUT, command execution on node NODEZ
                        .
                        .
                        .

                     If you do not want the logical names assigned for all
                     members of your cluster, type: NO and press <Return> . The
                     other members of the cluster will then need to be rebooted
                     in order to run the course.

                     As the installation continues, the following message
                     displays:

                        -----------------------
                                      *** IMPORTANT INFORMATION ***

                     The following line must be added to your system startup 
		     file, SYS$MANAGER:SYSTARTUP_V5.COM

                     $ @SYS$MANAGER:DECWVUE$CBI_STARTUP.COM

                     To run the course from a DECterm window, enter the 
		     following command at the DCL prompt:  @DECWVUE$CBI

                        -----------------------

                        %VMSINSTAL-I-MOVEFILES, Files will now be moved to- 
			_their target directories...
                         Installation of VUECBIDE_DE V2.1 completed at 14:34

                         VMSINSTAL procedure done at 14:34

                        $

                   9 When the DCL prompt appears, the VMSINSTAL procedure is
                     finished. Remove the installation media from the tape
                     drive.




				CBI "FileView and Its Desktop Applications" 8-7


 

















                                                                              9
               ________________________________________________________________

                        After Installing the German Language Variant of the CBI
                                        "FileView and Its Desktop Applications"




                  After installing the German language variant of the CBI
                  "FileView and Its Desktop Applications" you need to edit
                  the system startup file, and you should check whether the
                  course is running properly.



               Editing the System Startup File

                  Edit SYS$MANAGER:SYSTARTUP_V5.COM to add the following line:

                     $ @SYS$MANAGER:DECWVUE$CBI_STARTUP.COM

                  If the course was installed on a VAXcluster configuration,
                  you need to edit the system startup file of every member
                  of the cluster from which you want to be able to access the
                  course.

                  If you forget to do this, the logical names required to run
                  the course will not be assigned the next time you boot the
                  system. When you try to run the course, an error message
                  similar to the following will be displayed:

                     %DCL-E-OPENIN, error opening $DISK1:[JONES]VUE$CBI.COM; 
		     _as input
                     -RMS-E-FNF, file not found







				CBI "FileView and Its Desktop Applications" 9-1

 











               Checking the Installation

                  To test the installation of the course, try running it from
                  the DCL prompt in a DECterm window.

               Note You can only run the course on a DECwindows workstation.

                  The following command starts the course from a DECterm
                  window:

                     $  @DECWVUE$CBI

                  If the course is properly installed, a window labeled
                  Einfhrung in DECwindows: FileView und seine integrierten
                  Anwendungen - Computeruntersttztes Lernprogramm displays the
                  title page of the course and instructions on how to proceed.
































               9-2  CBI "FileView and Its Desktop Applications"

 

















                                                                              A
               ________________________________________________________________

                                                            Sample Installation






                  Sample Installation of the VMS DECwindows V2.1 Language
                  Variants

                  This appendix contains a sample installation of one language
                  variant. This sample was run on a system that had no previous
                  version of that language variant installed.

                  The sample installation assumes that no users are logged on
                  to your system.























                                                       Sample Installation  A-1

 











                     $ @SYS$UPDATE:VMSINSTAL DECWDE_DE021 MTA0: OPTIONS N


                      VAX/VMS Software Product Installation Procedure V5.4

                     It is 20-SEP-1991 at 12:05

                     Enter a question mark (?) at any time for help.
                     * Are you satisfied with the backup of your system 
		       disk [YES]? YES

                     Please mount the first volume of the set on MTA0:.
                     * Are you ready? YES
                     %MOUNT-I-MOUNTED, DECWDE_DE mounted on _$$MTA0:

                     The following products will be processed:

                       DECWDE_DE V2.1

                      Beginning installation of DECWDE_DE V2.1 at 12:06

                     %VMSINSTAL-I-RESTORE, Restoring product saveset A ...

                     Release notes included with this kit are always copied 
		     to SYS$HELP.

                     Additional Release Notes Options:

                      1.  Display release notes
                      2.  Print release notes
                      3.  Both 1 and 2
                      4.  None of the above

                     * Select option [2]: 2

                     * Queue name [SYS$PRINT]: LASER
                     Job 810 (queue LASER, entry 1295) started on LASER
                     * Do you want to continue the installation [NO]?: YES
                     %VMSINSTAL-I-RELMOVED, The product's release notes have- 
		     _been successfully moved to SYS$HELP.

                     %DECWDE_DE-I-INTRO, Installing VMS DECwindows German- 
		     _language support.
                     * Do you want to purge files replaced by this 
		       installation [YES]? YES
                     %DECWDE_DE-I-NOMORE, No more questions will be asked.
                     %DECWDE_DE-I-TIME, This installation will take- 
		     _approximately 10 minutes.

               A-2  Sample Installation

 










                     %MVSINSTAL-I-RESTORE, Restoring product save set B ...

                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[DECW$DEFAULTS.SYSTEM.DE_DE]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[SYSHLP.DE_DE]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[SYSHLP.EXAMPLES.DE_DE]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[SYSLIB.DE_DE]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
		     _directory VMI$ROOT:[SYSMSG.DE_DE]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk-
		     _directory VMI$ROOT:[VUE$LIBRARY.SYSTEM.DE_DE]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk-
		     _directory VMI$ROOT:[DECW$DEFAULTS.USER.DE_DE]
                     %VMSINSTAL-I-SYSDIR, This product creates system disk-
		     _directory VMI$ROOT:[VUE$LIBRARY.USER.DE_DE]
                     %VMSINSTAL-I-MOVEFILES, Files will now be moved to their-
                     _target directories...

                             Installation of DECWDE_DE V2.1 completed at 12:14

                             VMSINSTAL procedure done at 12:14


























                                                       Sample Installation  A-3

 











                  Sample Installation of the CBI "Introduction to DECwindows
                  Systems"

                  This appendix contains a sample installation of the German
                  Language Variant of the CBI "Introduction to DECwindows
                  Systems". This sample was run on a system that had no
                  previous version of the CBI installed.

                  The sample installation assumes that no users are logged on
                  to your system.

                     $ @SYS$UPDATE:VMSINSTAL DECWCBIDE_DE021 MTA0:


                      VAX/VMS Software Product Installation Procedure V5.4


                     It is 25-MAR-1991 at 14:23.

                     Enter a question mark (?) at any time for help.
                     * Are you satisfied with the backup of your system 
                       disk [YES]? YES


                     Please mount the first volume of the set on  MTA0:.
                     * Are you ready? YES

                     %MOUNT-I-MOUNTED, DECWDE mounted on _MARVIN$MTA0:
                     The following products will be processed:
                       DECWCBIDE_DE V2.1

                      Beginning installation of DECWCBIDE_DE V2.1 at 14:28

                     %VMSINSTAL-I-RESTORE, Restoring product save set A ...


                     -----------------------
                                     Starting the installation of
                                  German Language Version of the CBI
                            Introduction to DECwindows Systems - Version 2.1
                                   Computer-Based Instruction (CBI)

                           To stop the installation at any time, enter CTRL/Y.

                                    *  *  *  *  *  *  *  *  *  *




               A-4  Sample Installation

 












                           You may specify the logical or physical name of the
                           disk on which you wish to install the CBI.  If you
                           do not specify a disk, the CBI files will be placed
                           in SYS$COMMON:[SYSCBI.DECW_SYSTEMS_CBI] by default.

                           Press Return to use the default,
                           or enter a disk name:

                     -----------------------
                     %VMSINSTAL-I-RESTORE, Restoring product save set B ...

                     %VMSINSTAL-I-SYSDIR, This product creates system disk-
		     _directory VMI$ROOT:[SYSCBI.DECW_SYSTEMS_CBI].

                     * Do you want to add the course to the FileView 
		       Applications menu [YES]? YES


                     Added 'Lernprogramm' to the FileView Applications menu.

                     Assigning logical names required to run CBI.


                     -----------------------
                                   *** IMPORTANT INFORMATION ***

                  The following line must be added to your system startup file,
                  SYS$MANAGER:SYSTARTUP_V5.COM

                  $ @SYS$MANAGER:DECW$CBI_STARTUP.COM

                  To run the course from a DECterm window, enter the following
                  command at the DCL prompt:  RUN DECW$CBI

                     -----------------------

                     %VMSINSTAL-I-MOVEFILES, Files will now be moved to their- 
		     _target directories...
                      Installation of DECWCBIDE_DE V2.1 completed at 14:34

                      VMSINSTAL procedure done at 14:34

                     $





                                                       Sample Installation  A-5

 











                  Sample Installation of the CBI: "FileView and Its Desktop
                  Applications"

                  This appendix contains a sample installation of the German
                  Language Variant of the CBI "FileView and Its Desktop
                  Applications". This sample was run on a system that had no
                  previous version of the CBI installed.

                  The sample installation assumes that no users are logged on
                  to your system.

                     $ @SYS$UPDATE:VMSINSTAL VUECBIDE_DE021 MTA0:


                      VAX/VMS Software Product Installation Procedure V5.4


                     It is 25-MAR-1991 at 14:23.

                     Enter a question mark (?) at any time for help.
                     * Are you satisfied with the backup of your system disk 
                       [YES]? YES


                     Please mount the first volume of the set on  MTA0:.
                     * Are you ready? YES

                     %MOUNT-I-MOUNTED, DECWDE mounted on _MARVIN$MTA0:
                     The following products will be processed:
                       VUECBIDE_DE V2.1

                      Beginning installation of VUECBIDE_DE V2.1 at 14:28

                     %VMSINSTAL-I-RESTORE, Restoring product save set A ...


                     -----------------------
                                     Starting the installation of
                                  German Language Version of the CBI
                            FileView and Its Desktop Applications - Version 2.1
                                   Computer-Based Instruction (CBI)

                           To stop the installation at any time, enter CTRL/Y.

                                    *  *  *  *  *  *  *  *  *  *




               A-6  Sample Installation

 












                           You may specify the logical or physical name of the
                           disk on which you wish to install the CBI.  If you
                           do not specify a disk, the CBI files will be placed
                           in SYS$COMMON:[SYSCBI.DECW_VUE_CBI] by default.

                           Press Return to use the default,
                           or enter a disk name:

                     -----------------------
                     %VMSINSTAL-I-RESTORE, Restoring product save set B ...

                     %VMSINSTAL-I-SYSDIR, This product creates system disk- 
	             _directory VMI$ROOT:[SYSCBI.DECW_VUE_CBI].

                     * Do you want to add the course to the FileView 
		       Applications menu [YES]? YES


                     Added 'FileView Lernprogramm' to the FileView 
		     Applications menu.

                     Assigning logical names required to run CBI.





                     -----------------------
                                   *** IMPORTANT INFORMATION ***

                  The following line must be added to your system startup file,
                  SYS$MANAGER:SYSTARTUP_V5.COM

                  $ @SYS$MANAGER:DECWVUE$CBI_STARTUP.COM

                  To run the course from a DECterm window, enter the following
                  command at the DCL prompt:  @DECWVUE$CBI

                     -----------------------

                     %VMSINSTAL-I-MOVEFILES, Files will now be moved to their-
 		     _target directories...
                      Installation of VUECBIDE_DE V2.1 completed at 14:34

                      VMSINSTAL procedure done at 14:34

                     $

                                                       Sample Installation  A-7


 

















                                                                              B
               ________________________________________________________________

                               Files and Logical Names Installed on Your System





               Files and Logical Names Installed by the VMS DECwindows V2.1
               Language Variants

                  The installation procedure for the VMS DECwindows V2.1
                  Language Variants creates directories on your system,
                  installs a number of files and defines some logical names.
                  Directories lists the directories. Files lists the files
                  installed. Logical Names lists the logical names that are
                  added to the system logical name table.

                  Directories

                  The following directories are created on your system when a
                  language variant is installed:

                   _ SYS$SYSROOT:[DECW$DEFAULTS.USER.x]

                   _ SYS$SYSROOT:[DECW$DEFAULTS.SYSTEM.x]

                   _ SYS$SYSROOT:[SYSHLP.x]

                   _ SYS$SYSROOT:[SYSHLP.EXAMPLES.X]

                   _ SYS$SYSROOT:[SYSLIB.x]

                   _ SYS$SYSROOT:[SYSMSG.x]

                   _ SYS$SYSROOT:[VUE$LIBRARY.USER.x]

                   _ SYS$SYSROOT:[VUE$LIBRARY.SYSTEM.x]

               x represents one of the names in Table B-1.

                          Files and Logical Names Installed on Your System  B-1

 











                  Table B-1    Directory values

                  _____________________________________________________________
                  Language
                  variant__________Directory_name______________________________

                  Dutch            NL_NL

                  French           FR_FR

                  French Canadian  FR_CA

                  German           DE_DE

                  Italian          IT_IT

                  Norwegian        NO_NO

                  Swedish          SV_SE

                  Swiss French     FR_CH

                  Swiss German     DE_CH

                  Swiss_Italian____IT_CH_______________________________________

                  For example, the directories created when the Swedish
                  language variant is installed are:

                   _ SYS$SYSROOT:[DECW$DEFAULTS.USER.SV_SE]

                   _ SYS$SYSROOT:[DECW$DEFAULTS.SYSTEM.SV_SE]

                   _ SYS$SYSROOT:[SYSHLP.SV_SE]

                   _ SYS$SYSROOT:[SYSHLP.EXAMPLES.SV_SE]

                   _ SYS$SYSROOT:[SYSLIB.SV_SE]

                   _ SYS$SYSROOT:[SYSMSG.SV_SE]

                   _ SYS$SYSROOT:[VUE$LIBRARY.USER.SV_SE]

                   _ SYS$SYSROOT:[VUE$LIBRARY.SYSTEM.SV_SE]




               B-2  Files and Logical Names Installed on Your System

 











                  Files

                  Table B-2 contains the names of all files installed on your
                  system when a language variant is installed.












































                          Files and Logical Names Installed on Your System  B-3

 











               Table B-2    New files installed (VMS DECwindows V2.1)

               ________________________________________________________________
               Directory_________________________Filename______________________

               SYS$SYSROOT:[DECW$DEFAULTS.SYSTEM.DDIF$VIEW.UID

                                                 DDIF$VIEWWGT.UID

                                                 DECW$BOOKREADER.DAT

                                                 DECW$BOOKREADER.UID

                                                 DECW$CALC.DAT

                                                 DECW$CALC.UID

                                                 DECW$CALENDAR.DAT

                                                 DECW$CALENDAR.UID

                                                 DECW$CARDFILER.DAT

                                                 DECW$CARDFILER.UID

                                                 DECW$CLOCK.DAT

                                                 DECW$CLOCK.UID

                                                 DECW$LOGIN.DAT

                                                 DECW$LOGIN.UID

                                                 DECW$MAIL.DAT

                                                 DECW$MAIL_MAIN.UID

                                                 DECW$MAIL_MISC.UID

                                                 DECW$MAIL_READ.UID

                                                 DECW$MAIL_SEND.UID

                                                       (continued on next page)




               B-4  Files and Logical Names Installed on Your System

 











               Table B-2 (Cont.)    New files installed (VMS DECwindows V2.1)

               ________________________________________________________________
               Directory_________________________Filename______________________

                                                 DECW$NOTEPAD.DAT

                                                 DECW$NOTEPAD.UID

                                                 DECW$PAINT.DAT

                                                 DECW$PAINT.UID

                                                 DECW$PRINTWGT_UI.UID

                                                 DECW$PUZZLE.UID

                                                 DECW$PUZZLE.DAT

                                                 DECW$SESSION.DAT

                                                 DECW$SESSION.UID

                                                 DECW$SM_BW.DAT

                                                 DECW$SM_COLOR.DAT

                                                 DECW$SM_GENERAL.DAT

                                                 DECW$SM_GRAY.DAT

                                                 DECW$TERMINAL.DAT

                                                 DECW$TERMINAL.UID

                                                 DECW$WINMGR.DAT

                                                 DECW$WINMGR.UID

                                                 VUE$MASTER.UID

                                                       (continued on next page)






                          Files and Logical Names Installed on Your System  B-5

 











               Table B-2 (Cont.)    New files installed (VMS DECwindows V2.1)

               ________________________________________________________________
               Directory_________________________Filename______________________

               SYS$SYSROOT:[SYSHLP]              DECWx021.RELEASE_NOTES. See
                                                 Table 2-1.

               SYS$SYSROOT:[SYSHLP.x]            DDIF$VIEW.HLB

                                                 DECW$BOOKREADER.HLB

                                                 DECW$CALC.HLB

                                                 DECW$CALENDAR.HLB

                                                 DECW$CARDFILER.HLB

                                                 DECW$CLOCK.HLB

                                                 DECW$HELPHELP.HLB

                                                 DECW$MAIL.HLB

                                                 DECW$NOTEPAD.HLB

                                                 DECW$PAINT.HLB

                                                 DECW$PRINTWGT.HLB

                                                 DECW$PUZZLE.HLB

                                                 DECW$SESSION.HLB

                                                 DECW$TERMINAL.HLB

                                                 DECW$VUE.HLB

               SYS$SYSROOT:[SYSMGR]              DECW$STARTI18N.COM

               SYS$SYSROOT:[SYSMSG.x]            DDIF$VIEWMSG.EXE

                                                       (continued on next page)





               B-6  Files and Logical Names Installed on Your System

 











               Table B-2 (Cont.)    New files installed (VMS DECwindows V2.1)

               ________________________________________________________________
               Directory_________________________Filename______________________

                                                 DECW$DWTERRDB.DAT

                                                 DECW$TERMINALMSG.EXE

                                                 DECW$XLIBERRDB.DAT

               SYS$SYSROOT:[VUE$LIBRARY.SYSTEM.x]VUE$COMPARE.COM

                                                 VUE$COMPILE.COM

                                                 VUE$COPY.COM

                                                 VUE$CREATE_DIRECTORY.COM

                                                 VUE$CREATE_PUBLIC_PROFILE.COM

                                                 VUE$DELETE.COM

                                                 VUE$EDIT.COM

                                                 VUE$LINK.COM

                                                 VUE$PURGE.COM

                                                 VUE$RENAME.COM

                                                 VUE$RUN.COM

                                                 VUE$SEARCH.COM

                                                 VUE$SET_PROTECTION.COM

                                                 VUE$SHOW.COM

                                                 VUE$SYSTEM_PROFILE.VUE$DAT

                                                 VUE$TYPE.COM

                                                       (continued on next page)




                          Files and Logical Names Installed on Your System  B-7

 











               Table B-2 (Cont.)    New files installed (VMS DECwindows V2.1)

               ________________________________________________________________
               Directory_________________________Filename______________________

               SYS$COMMON:[DECW$BOOK]            DECWx021BOOKREADER.-
						 _DECW$BOOKSHELF.
                                                 See Table 3-2. [1]

                                                 DECWxBOOKREADER.DECW$BOOK. The
                                                 language version of Using the
                                                 Bookreader.[1]
               ________________________________________________________________
               [1]These files are not installed with the Norwegian language
               variant, which has no Norwegian online documentation.
               ________________________________________________________________

                  Logical Names

                  The following logical names are entered into the system
                  logical name table when you invoke a language variant. These
                  names are stored in the product's startup file. They are
                  automatically entered into the system logical name table
                  whenever the system reboots or whenever the software is
                  invoked.

                  The logical name XNL$LANG is only created when you specify
                  a value for both parameter1 and parameter2 in the system
                  startup file. Refer to Editing the System Startup File for
                  more information about these parameters.

                   _ DECW$SYSTEM_DEFAULTS_x

                   _ SYS$HELP_x

                   _ SYS$LIBRARY_x

                   _ SYS$MESSAGE_x

                   _ VUE$LIBRARY_x

                   _ XNL$LANG

                  x represents one of the values in Table B-3.




               B-8  Files and Logical Names Installed on Your System

 











                  Table B-3    Logical name values

                  _____________________________________________________________
                  Language
                  variant__________Values______________________________________

                  Dutch            NL_NL

                  French           FR_FR

                  French Canadian  FR_CA

                  German           DE_DE

                  Italian          IT_IT

                  Norwegian        NO_NO

                  Swedish          SV_SE

                  Swiss French     FR_CH

                  Swiss German     DE_CH

                  Swiss_Italian____IT_CH_______________________________________

                  For example, the logical names for the Italian language
                  variant are:

                   _ DECW$SYSTEM_DEFAULTS_IT_IT

                   _ SYS$HELP_IT_IT

                   _ SYS$LIBRARY_IT_IT

                   _ SYS$MESSAGE_IT_IT

                   _ VUE$LIBRARY_IT_IT

                   _ XNL$LANG








                          Files and Logical Names Installed on Your System  B-9

 











               Files and Logical Names Installed by the CBI "Introduction to
               DECwindows Systems"

                  The installation procedure for the German Language Variant
                  of the CBI "Introduction to DECwindows Systems" creates a
                  directory on your system, installs a number of files, and
                  defines two logical names. These are listed in the following
                  sections.


                  Directory

                  Depending on the device, on which you install the course, the
                  following directory is created:

                   _ If you accept the default of installing the CBI on

                     SYS$COMMON:

                     SYS$COMMON:[SYSCBI.DECW_SYSTEMS_CBI]

                   _ If you specify a different device:

                     device:[DECW_SYSTEMS_CBI]
























               B-10  Files and Logical Names Installed on Your System

 











                  Files

                  97 files are copied to the following directories:


               Table B-4    New files installed (CBI "Introduction to DECwindows
                            Systems")

               ________________________________________________________________
               Directory_________________________Filename______________________

               device:[DECW_SYSTEMS_CBI]         DECWXXX.CBI [1]

                                                 DECWXXX.DAT [1]

                                                 DECWCBI.DATA

                                                 DECWCBI.EXE

                                                 DECWCBI_BURG.UID

               DECW$SYSCOMMON:[VUE$LIBRARY.SYSTEMDECWCBI$PROFILE.VUE$DAT
               ________________________________________________________________
               [1]XXX is used as a wildcard and serves as placeholder.
               ________________________________________________________________

                  In addition, the following file is created:

                  SYS$COMMON:[SYSMGR]DECW$CBI_STARTUP.COM

                  Logical Names

                  The following two logical names are entered into the
                  system logical name table. The definition of these names is
                  performed by the product's startup file DECW$CBI_STARTUP.COM.
                  If you invoke this file from the system startup file, the
                  logicals are entered into the system logical name table
                  whenever the system reboots.

                   _ DECW$CBI_SUPPORT

                   _ DECW$CBI






                         Files and Logical Names Installed on Your System  B-11

 











               Files and Logical Names Installed by the CBI "FileView and Its
               Desktop Applications"

                  The installation procedure for the German Language Variant
                  of the CBI "FileView and Its Desktop Applications" creates
                  a directory on your system, installs a number of files,
                  and defines three logical names. These are listed in the
                  following sections.


                  Directory

                  Depending on the device, on which you install the course, the
                  following directory is created:

                   _ If you accept the default of installing the CBI on

                     SYS$COMMON:

                     SYS$COMMON:[SYSCBI.DECW_VUE_CBI]

                   _ If you specify a different device:

                     device:[DECW_VUE_CBI]
























               B-12  Files and Logical Names Installed on Your System

 











                  Files

                  609 files are copied to the following directories:


               Table B-5    New files installed (CBI "FileView and Its Desktop
                            Applications")

               ________________________________________________________________
               Directory_________________________Filename______________________

               device:[DECW_VUE_CBI]             BOOKXXX.DAT [1]

                                                 BOOKXXX.FSE [1]

                                                 BOOKREADER.DATA

                                                 CAXXX.DAT [1]

                                                 CAXXX.FSE [1]

                                                 CALC.DATA

                                                 CALENDAR.DATA

                                                 CARDFILER.DATA

                                                 CBI_MODULE.TXT

                                                 CDA.DATA

                                                 CDAXXX.DAT [1]

                                                 CDAXXX.FSE [1]

                                                 CLOCK.DATA

                                                 CLOCKXXX.DAT [1]

                                                 CLOCKXXX.FSE [1]

                                                 CREATEMENU.FSE

               ________________________________________________________________
               [1]XXX is used as a wildcard and serves as placeholder.

                                                       (continued on next page)

                         Files and Logical Names Installed on Your System  B-13

 











               Table B-5 (Cont.)    New files installed (CBI "FileView and Its
                                    Desktop Applications")

               ________________________________________________________________
               Directory_________________________Filename______________________

                                                 DAVE01.FSE

                                                 EBOX.FSE

                                                 EDITMENU.FSE

                                                 EXBOX.FSE

                                                 FVXXX.DAT [1]

                                                 FVXXX.FSE [1]

                                                 GESCHICHTE.TXT

                                                 INBOX.FSE

                                                 MAIL.DATA

                                                 MAILXXX.FSE [1]

                                                 MAILCONTENTS.DAT

                                                 MAINTBOX.FSE

                                                 MLXXX.DAT [1]

                                                 NOTEXXX.DAT [1]

                                                 NOTEXXX.FSE [1]

                                                 NOTEPAD.DATA

                                                 OUTBOX.FSE

                                                 OVERXXX.DAT [1]

               ________________________________________________________________
               [1]XXX is used as a wildcard and serves as placeholder.

                                                       (continued on next page)


               B-14  Files and Logical Names Installed on Your System

 











               Table B-5 (Cont.)    New files installed (CBI "FileView and Its
                                    Desktop Applications")

               ________________________________________________________________
               Directory_________________________Filename______________________

                                                 OVERXXX.FSE [1]

                                                 OVERVIEW.DATA

                                                 PAINT.DATA

                                                 PAINTXXX.DAT [1]

                                                 PAINTXXX.FSE [1]

                                                 PICKXXX.FSE [1]

                                                 POST.DATA

                                                 PREXXX.DAT [1]

                                                 PREXXX.FSE [1]

                                                 PREREQ.DATA

                                                 PRINTBOX.FSE

                                                 QUEBOX.FSE

                                                 READMENU.FSE

                                                 TURMUHR.DDIF

                                                 VUE.DATA

                                                 VUECBI_BUTTON.INFO

                                                 VUECBI_LOCAL.INFO

                                                 VUECONTENTS.DAT

               ________________________________________________________________
               [1]XXX is used as a wildcard and serves as placeholder.

                                                       (continued on next page)


                         Files and Logical Names Installed on Your System  B-15

 











               Table B-5 (Cont.)    New files installed (CBI "FileView and Its
                                    Desktop Applications")

               ________________________________________________________________
               Directory_________________________Filename______________________

                                                 VUECONTENTS.FSE

                                                 W.FSE

               DECW$SYSCOMMON:[VUE$LIBRARY.SYSTEMDECWVUECBI$PROFILE.VUE$DAT____

                  In addition, the following file is created:

                  SYS$COMMON:[SYSMGR]DECWVUE$CBI_STARTUP.COM

                  Logical Names

                  The following three logical names are entered into the
                  system logical name table. The definition of these names
                  is performed by the product's startup file DECWVUE$CBI_
                  STARTUP.COM. If you invoke this file from the system startup
                  file, the logicals are entered into the system logical name
                  table whenever the system reboots.

                   _ CBI$PRACTICE

                   _ DECWVUE$CBI_SUPPORT

                   _ DECWVUE$CBI


















               B-16  Files and Logical Names Installed on Your System

 




















               ___________________________________________________________


                                                                      Index



               A                               Contents of media kit, 1-1

               Aborting the installation,      CTRL/Y, 2-3

                  2-3                          D

               Account quotas, 1-4             Device name, 2-4
               Amending the bookshelf          Disk space, 1-3
                  file, 3-3
               APPEND COMMAND, 3-3             E
               Authorize utility, 1-4
               B                               Editing the system startup
                                                  file, 3-1
               Backing up the system disk,     Error messages, 2-10
                  1-6                          Error recovery, 2-10

               Bill of materials, 1-1          F
               Bookshelf file, 3-3
               C                               Files created on the system
                                                  , 2-2
               Checking the installation,        CBI, B-10
                  3-4                               FileView, B-12
               Completing the installation       VMS DECwindows V2.1, B-1
                  , 2-9                        Free disk blocks, 1-3

                                                                    Index-1

 






          H                               O

          Hardware requirements, 4-1,     Online documentation, 3-3
             7-1                          Online release notes, 1-1
          I                                 accessing, 2-1
                                            reading, 2-6
          Informational messages, 2-7     OPTIONS, 2-1, 2-4

          Installation                    P
            aborting, 2-3
            checking, 3-4                 Preparing for the
            procedure, 2-1, 2-3, 5-1,        installation, 1-1, 4-1,
               8-1                           7-1
            questions, 2-5                Prerequisite software, 1-2
            requirements, 1-2, 1-6        Privileges, 1-2
            starting, 2-3                 Problems, 3-5
          Installation names, 2-3         Q
          Installation verification
             procedure, 2-2               Quotas
          Installing the CBI software       setting, 1-4
             , 5-1, 8-1                   R
          Invoking language variants,
             3-4                          Release notes, 1-1
          IVP, 2-2                          accessing, 2-1

          L                                 reading, 2-6
                                          Reporting problems, 3-5
          Library bookshelf file, 3-3     Running language variants,
          Logical names, B-8                 3-4

          M                               S

          Media kit, 1-1                  Sample installation
          Messages                          CBI, A-4
            error, 2-10                        FileView, A-6
            informational, 2-7              VMS DECwindows V2.1
          Mounting the media, 2-6             Language Variant, A-1

                                          Saveset names, 2-3
                                          SETPRV, 1-2

          Index-2

 






          SHOW DEVICE command, 1-4        System software addendum
          Software product                   (SSA), 1-2
             description (SPD), 1-2       V
          Software requirements, 4-2,
             7-1                          VMS DECwindows V2.1, 1-2
          Starting the installation,      VMSINSTAL
             2-3                            command line, 2-3
          Startup file, 3-1                 invoking, 2-3
          System configuration, 4-1,        OPTIONS, 2-1, 2-4
             4-2, 7-1                       requirements, 1-4
          System disk, 1-6                VMS V5.4, 1-2





























                                                              Index-3
