 














             Installing DEC PHIGS for VMS

             Order Number: AA-PBE5B-TE



             September 1990



             This document contains instructions for installing DEC PHIGS
             on a VMS operating system. It also explains how to read the
             online release notes before or after installing this product.




             Revision/Update Information:  This revised manual supersedes
                                           the Installing DEC PHIGS for
                                           VMS (Order Number AA-PBE5A-TE).

             Operating System and Version: VMS Version 5.3-1 or higher
                                           VAXstation Requirement:
                                           VAXstation Windowing Software
                                           Version 4.0
                                           DECwindows Version 5.3-1 or
                                           higher

             Software Version:             DEC PHIGS for VMS Version 2.2
             digital equipment corporation
             maynard, massachusetts

 


             Theiinformationbin this document is subject to change without
             notice and should not be construed as a commitment by Digital
             Equipment Corporation. Digital Equipment Corporation assumes
             no responsibility for any errors that may appear in this
             document.

             The software described in this document is furnished under a
             license and may be used or copied only in accordance with the
             terms of such license.

             No responsibility is assumed for the use or reliability
             of software on equipment that is not supplied by Digital
             Equipment Corporation or its affiliated companies.

             Restricted Rights: Use, duplication, or disclosure by the
             U.S. Government is subject to restrictions as set forth in
             subparagraph (c)(1)(ii) of the Rights in Technical Data and
             Computer Software clause at DFARS 252.227-7013.

               Digital Equipment Corporation 1988, 1989, 1990.

             All Rights Reserved.
             Printed in U.S.A.

             The postpaid Reader's Comments forms at the end of this docu-
             ment request your critical evaluation to assist in preparing
             future documentation.

             The following are trademarks of Digital Equipment Corporation:

             CDA         LN03                VAXcluster
             DDIF        MASSBUS             VAX RMS
             DDIS        MicroVAX            VAXstation
             DEC         PrintServer 40      VMS
             DECnet      Q-bus               VMS/ULTRIX Connection
             DECUS       ULTRIX              VT
             DECstation  ULTRIX Mail         XUI
                         Connection
             DECsystem   ULTRIX Worksystem
                         Software
             DECwindows  UNIBUS
             DTIF        VAX                 DIGITAL

             X Window System, Version 11, is a registered trademark of
             Massachusetts Institute of Technology.

                                                                    ZK5456

 






             This document was prepared using VAX DOCUMENT, Version 1.2






































               Installing DEC PHIGS for VMSInstalling DEC PHIGS for VMS -3

 















                                                                  Contents
          ________________________________________________________________

          Preface .........................................................  v
          Installing DEC PHIGS for VMS.................................  1
            Preparing to Install DEC PHIGS.............................  1
              Prerequisite Software..................................... 2
              Prerequisite VMS Classes.................................. 2
              Accessing the Online Release Notes......................   2
              Installation Procedure Requirements.....................   3
              User Account Quotas and Privileges......................   7
              VMS License Management Facility .........................  7
              Using VMSINSTAL............................................ 8
            Installing DEC PHIGS ........................................ 10
            Installing DEC PHIGS on a VAXcluster......................  35
            After the Installation...................................... 35
            Completing the Installation................................ 36
            Error Conditions............................................. 37
            Maintenance Updates ......................................... 39
            Determining and Reporting Problems........................  40
            DEC PHIGS Development Kit Sample Installation...........    40
            DEC PHIGS Run-Time Kit Sample Installation...............   44









                                                                       iii

 







          ________________________________________________________________
          Tables

               1     Installed Files for the DEC PHIGS Development
                     Kit..................................................  15

               2     Installed Files for the DEC PHIGS Run-Time
                     Kit..................................................  24






























          iv

 














                                                                   Preface
          ________________________________________________________________



             This document describes how to install the DEC PHIGS de-
             velopment kit and DEC PHIGS run-time kit on a VMS operating
             system. It is intended for system managers. This document
             applies to Version 2.2 of DEC PHIGS.

             Keep this document with your distribution kit. You will need
             it to install maintenance updates or to reinstall DEC PHIGS
             on your VMS system for any other reason.

             At the back of this document are two Reader's Comments forms.
             If you have any comments about this document, fill out one
             form and mail it; your comments will be considered for the
             next revision of the installation guide.

             The installation procedure is described step-by-step and is,
             for the most part, self-explanatory. The system prompts you
             to answer questions and to change volumes, and waits for you
             to tell it to continue.

          ____________________________________________________________

          Associated Documents

             For more information about installing DEC PHIGS on a VMS
             system, see your processor-specific installation/operations
             guide.

                                                                         v

 






             For specific questions on your operating system, refer to the
             documentation set for that operating system.

          ____________________________________________________________

          Conventions Used in This Document

             Defaults appear in brackets ([])  throughout the installation
             procedure. Red ink indicates user input. The RETURN key is
             symbolized as <RET>. <CTRL/x> indicates that you must press
             the key labeled CTRL while you simultaneously press another
             key, for example CTRL/C.



























          vi

 





          ____________________________________________________________

          Installing DEC PHIGS for VMS

             This manual explains the DEC PHIGS installation procedure
             on a VMS platform. The information in this manual covers the
             following topics:

              o Installation prerequisites

              o Installation procedures

              o Maintenance updates

              o Problem reporting

              o Sample DEC PHIGS development kit installation

              o Sample DEC PHIGS run-time kit installation

          ____________________________________________________________

          Preparing to Install DEC PHIGS

             Your bill of materials (BOM) and indented bills report (BIL)
             specify the number and contents of your media. Be sure to
             check the contents of your kit against this information.
             If your kit is damaged or if you find that parts of it are
             missing, call your Digital representative.

             Distribution media must be mounted in numerical order. The
             installation procedure prompts you to mount the volumes. For
             more information
             on how to mount distribution media, see your processor-
             specific
             installation/operations guide, which also details several op-
             tions for
             the installation procedure.


                                            Installing DEC PHIGS for VMS 1

 





          ____________________________________________________________
          Prerequisite Software

             To install DEC PHIGS on a VAXstation, you must have one of
             the following products installed:

              o VAXstation Windowing Software Versions 4.0 or higher

              o VMS Version 5.3-1 or higher with its related DECwindows
                version

          ____________________________________________________________
          Prerequisite VMS Classes

             To install DEC PHIGS, you must have the following VMS
             classes:

              o VMS Required Saveset

              o Network Support

             The DEC PHIGS development kit also requires the following VMS
             class:

              o Programming Support

          ____________________________________________________________
          Accessing the Online Release Notes

             DEC PHIGS provides online release notes. The prompt to dis-
             play and print the release notes during the installation
             appears in step 4 of the installation procedure when you in-
             voke VMSINSTAL with the OPTIONS N parameter. (The OPTIONS N
             parameter is available only with VMS Version 4.4 or higher.)
             This option lets you read or print the release notes before
             installing DEC PHIGS:

              o To obtain the DEC PHIGS development kit release notes af-
                ter the installation, type or print the file
                SYS$HELP:DECPHIGS022.RELEASE_NOTES.

              o To obtain the DEC PHIGS run-time kit release notes after
                the installation, type or print the file
                SYS$HELP:DECPHIGSRTO022.RELEASE_NOTES.

          2  Installing DEC PHIGS for VMS

 





          ____________________________________________________________
          Installation Procedure Requirements

             Before you begin, you should perform a system disk (or disks)
             backup. The installation procedure takes approximately 5 to
             30 minutes, depending on the type of media and your system
             configuration. Before installing DEC PHIGS, you must have the
             following privileges and resources:

              o SETPRV privileges, or CMKRNL, WORLD, and SYSPRV privi-
                leges.

              o A minimum of 6,500 free global pages.

              o A minimum of 42 free global sections.

              o 150 pages in the CLI symbol table (CLISYMTBL).

              o A minimum of 23,000 blocks of free disk space is required
                for the DEC PHIGS development kit during installation;
                20,000 blocks are used after installation.

              o A minimum of 17,000 blocks of free disk space is required
                for the DEC PHIGS run-time kit during installation; 16,000
                blocks are used after installation.

                                          NOTE

                 You must ensure that your system has the necessary
                 global page and global section SYSGEN quotas for the
                 installation. Failure to do so could cause the DCL
                 tables to be corrupted in some situations.

             To determine the number of available global pages on your
             system, invoke the VMS Install Utility by typing the follow-
             ing commands:

               $ INSTALL :== $INSTALL/COMMAND_MODE <RET>
               $ INSTALL <RET>

                                            Installing DEC PHIGS for VMS 3

 






             Then type the following commands:

               INSTALL> LIST/GLOBAL/SUMMARY <RET>

                       Summary of Local Memory Global Sections

               nn Global Sections Used,  nnnn/nnnn Global Pages Used/Unused


               INSTALL> EXIT <RET>

             When you issue these commands, the system displays a summary
             of the number of global sections used, the number of global
             pages used, and the number of global pages available. To exit
             from the VMS Install Utility, type the EXIT command.

             DEC PHIGS requires approximately 6500 global pages. If
             there are fewer than 6500 pages available, you can delete
             an existing known image with the VMS Install Utility, or
             you can increase the GBLPAGES system parameter with the
             VMS System Generation Utility (SYSGEN) by editing the file
             SYS$SYSTEM:MODPARAMS.DAT and then invoking the AUTOGEN com-
             mand procedure, SYS$UPDATE:AUTOGEN.COM. To increase the
             number of global pages, add the following line to the file
             SYS$SYSTEM:MODPARAMS.DAT, where n is the number of GBLPAGES
             to add:

               ADD_GBLPAGES = n

             For more information on the AUTOGEN command procedure, see
             your processor-specific installation/operations guide.








          4  Installing DEC PHIGS for VMS

 






             You can determine the number of available global sections by
             invoking the SYSGEN utility as follows:

               $ RUN SYS$SYSTEM:SYSGEN <RET>
               SYSGEN> USE CURRENT <RET>
               SYSGEN> SHOW GBLSECTIONS <RET>

          Parameter Name             Current   Default   Minimum   Maximum Unit  Dynamic
          --------------             -------   -------   -------   ------- ----  -------
          GBLSECTIONS                    400       250        20      4095 Sections

               SYSGEN> EXIT <RET>

             The first number displayed is the current number of global
             sections. Compare this number to the number of global sec-
             tions in use displayed by the VMS Install Utility. DEC PHIGS
             requires 42 global sections. Therefore, if the number of
             global sections in use plus 42 exceeds the current number of
             global sections, you must increase the number of available
             global sections before you can install DEC PHIGS. To increase
             the number, you must increase the GBLSECTIONS system parame-
             ter with SYSGEN by editing the file SYS$SYSTEM:MODPARAMS.DAT
             and then invoking the SYS$UPDATE:AUTOGEN.COM procedure. To
             increase the number of global sections, add the following
             line to the file SYS$SYSTEM:MODPARAMS.DAT, where n is the
             number of GBLSECTIONS to add:

               ADD_GBLSECTIONS = n

             For more information on the AUTOGEN.COM procedure, see your
             processor-specific installation/operations guide.

             If the number of global sections in use plus 42 is less than
             the current number of global sections, you can exit from
             SYSGEN and continue.




                                            Installing DEC PHIGS for VMS 5

 






             You can determine the current value for CLISYMTBL by invoking
             SYSGEN as follows:

               $ RUN SYS$SYSTEM:SYSGEN <RET>
               SYSGEN> USE CURRENT <RET>
               SYSGEN> SHOW CLISYMTBL <RET>

          Parameter Name             Current   Default   Minimum   Maximum Unit  Dynamic
          --------------             -------   -------   -------   ------- ----  -------
          CLISYMTBL                      250       250        10       500 Pages       D

               SYSGEN> EXIT <RET>

             The first number displayed is the current number of pages
             allocated for the CLI Symbol Table. DEC PHIGS requires that
             CLISYMTBL be at least 150 during installation. Therefore,
             if the current value is less than 150, you must increase
             this value before you can install DEC PHIGS. To increase the
             number, enter the following commands before exiting SYSGEN:




















          6  Installing DEC PHIGS for VMS

 








               $ RUN SYS$SYSTEM:SYSGEN <RET>
               SYSGEN> SET CLISYMTBL 150 <RET>
               SYSGEN> WRITE CURRENT <RET>

             You must then log out and log back in for the new value to be
             in effect.

          ____________________________________________________________
          User Account Quotas and Privileges

             To use DEC PHIGS, a user must have an account with an open
             file limit (FILLM) of at least 20.

             Use the VMS Authorize Utility (AUTHORIZE) to compare the
             current values of these quotas with the requirements for
             DEC PHIGS. The account used in the following example is the
             SYSTEM account:

               $ SET DEFAULT SYS$SYSTEM <RET>
               $ RUN AUTHORIZE <RET>
               UAF> SHOW SYSTEM <RET>

             To change the values of these quotas, use the MODIFY command.
             For more information, see the VMS Authorize Utility Manual.

          ____________________________________________________________
          VMS License Management Facility

             The VMS License Management Facility (LMF) is available begin-
             ning with Version 5.0 of the VMS operating system. If you are
             installing DEC PHIGS on a VMS Version 5.0 system, or higher,
             you must register your DEC PHIGS software license.

             The license registration information you need is contained in
             the Product Authorization Key (PAK) that is shipped with DEC
             PHIGS. The PAK is a paper certificate that contains informa-
             tion about the license that allows you to use a particular
             piece of software.

                                            Installing DEC PHIGS for VMS 7

 






             During the installation, you will be asked if you have reg-
             istered the DEC PHIGS license and loaded the appropriate
             authorization key. You must register and load your license
             for DEC PHIGS before you start the installation to run the
             Installation Verification Procedure (IVP) and use the soft-
             ware.

             To register a license under a VMS Version 5.0 system, you
             must first log in to a privileged account. You then have a
             choice of two ways to perform the registration:

              o Invoke the SYS$UPDATE:VMSLICENSE.COM procedure. When it
                prompts you for information, respond with data from your
                Product Authorization Key (PAK).

              o Issue the LICENSE REGISTER DCL command with the appropri-
                ate qualifiers that correspond to the information on the
                PAK.

             For complete information on using LMF, see the manual on the
             License Management Utility in the VMS documentation set.

          ____________________________________________________________
          Using VMSINSTAL

             After you log in to a privileged account to install DEC
             PHIGS, invoke VMSINSTAL, the command procedure that installs
             this product. An example of this procedure is shown in steps
             1 and 2 in the section entitled "Installing DEC PHIGS ."

             To install DEC PHIGS using the VMS Install command procedure,
             use the following syntax:

             DEC PHIGS DEVELOPMENT KIT

               $ @SYS$UPDATE:VMSINSTAL DECPHIGS022 ddcu: [OPTIONS N] <RET>

             DEC PHIGS RUN-TIME KIT

               $ @SYS$UPDATE:VMSINSTAL DECPHIGSRTO022 ddcu: [OPTIONS N] <RET>

          8  Installing DEC PHIGS for VMS

 






             ddcu:
             Represents a device name where the distribution volumes will
             be mounted for the DEC PHIGS installation media, where dd
             is the device code, c is the controller code, and u is the
             unit number. You do not have to use the console drive to
             install DEC PHIGS. If you do use the console drive after
             the installation, you should replace any media you removed
             from the drive prior to the installation. Examples in this
             document use the device name MUA0:.

             OPTIONS N
             OPTIONS N is an optional parameter you should provide if you
             want to be prompted to display or print the release notes. If
             you do not include the OPTIONS N parameter, VMSINSTAL does
             not prompt you to display or print the release notes.

             VMSINSTAL permits the use of several other options. For more
             information on the other options, see your processor-specific
             installation/operations guide.

             If you do not supply the first two parameters, VMSINSTAL
             prompts you for the product and device names. If you wish to
             be prompted for the product and device names and to display
             or print the release notes, type the following:

               $ @SYS$UPDATE:VMSINSTAL <RET>

             When you invoke VMSINSTAL, it checks the following:

              o Whether you are logged in to a privileged account. Digital
                recommends that you install software from the system
                manager's account with your default device and directory
                set to SYS$UPDATE.

              o Whether you have adequate quotas for installation.
                VMSINSTAL checks for the following quota values:

                 _ ASTLM = 24

                 _ BIOLM = 18

                 _ BYTLM = 18000

                                            Installing DEC PHIGS for VMS 9

 






                 _ DIOLM = 18

                 _ ENQLM = 30

                 _ FILLM = 20

              o Whether the following conditions exist:

                 _ DECnet is up and running.

                 _ Users are logged in to the system.

                If VMSINSTAL detects either of these conditions, you will
                be asked whether you want to continue the installation.
                You should discontinue the conditions before resuming the
                installation procedure. If you want to continue, type YES.
                If you want to stop the installation, press RETURN.

             You must register the information contained in the Product
             Authorization Key (PAK) that is shipped with DEC PHIGS by us-
             ing either the VMS License command procedure (VMSLICENSE) or
             the LICENSE REGISTER and LICENSE LOAD commands, as described
             in the VMS License Management Utility Manual.

          ____________________________________________________________

          Installing DEC PHIGS

             This section contains excerpts from the installation pro-
             cedure and explains each step. Defaults appear in brackets
             throughout the installation procedure.

             To abort the installation procedure at any time, press
             CTRL/Y. When you press CTRL/Y, the installation procedure
             deletes all files it has created up to that point and then
             returns you to DCL level. If you want to retry the installa-
             tion procedure after pressing CTRL/Y, you must proceed from
             step 2.

          10  Installing DEC PHIGS for VMS

 






             Attempting to link programs on DEC PHIGS run-time results
             in linker errors. Do not install DEC PHIGS run-time Version
             2.2 if you have already installed the full development kit
             of DEC PHIGS. If you do, the installation procedure will
             overwrite the development kit with the run-time only kit.
             You can determine which version of DEC PHIGS is currently
             installed by issuing the following DCL command:

               $ ANALYZE/IMAGE SYS$LIBRARY:PHIGS$RTL

             Before installing DEC PHIGS, Digital recommends that you back
             up your system disk. Once you have done so, you can begin the
             installation.

             Step 1: Log in to a privileged account and set your default
             device and directory to SYS$UPDATE. Set your default device
             and directory to SYS$COMMON:[SYSUPD].

               Username: SYSTEM  <RET>
               Password:         <RET>
               $ SET DEFAULT SYS$UPDATE: <RET>

             Step 2: Invoke VMSINSTAL.

             DEC PHIGS DEVELOPMENT KIT

               $ @VMSINSTAL DECPHIGS022 MUA0: OPTIONS N <RET>

                     VAX/VMS Software Product Installation Procedure V5.0

               It is 02-APR-1990 at 15:19.
               Enter a question mark (?) at any time for help.

               * Are you satisfied with the backup of your system disk [YES]?<RET>





                                           Installing DEC PHIGS for VMS 11

 






             DEC PHIGS RUN-TIME KIT

               $ @VMSINSTAL DECPHIGSRTO022 MUA0: OPTIONS N <RET>

                     VAX/VMS Software Product Installation Procedure V5.0


               It is 02-APR-1990 at 15:19.
               Enter a question mark (?) at any time for help.

               * Are you satisfied with the backup of your system disk [YES]?<RET>

             If you are satisfied with the backup of your system disk,
             press RETURN. Otherwise, type NO and press RETURN to discon-
             tinue the installation.

             Step 3: Insert the first installation kit volume.

             DEC PHIGS DEVELOPMENT KIT

               The following products will be processed:

                 DECPHIGS V2.2

               Beginning installation of DECPHIGS V2.2 at 15:20

               %VMSINSTAL-I-RESTORE, Restoring product saveset A...

             DEC PHIGS RUN-TIME KIT

               The following products will be processed:

                 DECPHIGSRTO V2.2

               Beginning installation of DECPHIGSRTO V2.2 at 15:20

               %VMSINSTAL-I-RESTORE, Restoring product saveset A...


          12  Installing DEC PHIGS for VMS

 






             Step 4: Select a release notes option.

             This step applies only if you specified OPTIONS N in step 2.

               Release Notes Options:

                   1. Display release notes
                   2. Print release notes
                   3. Both 1 and 2
                   4. Copy release notes to SYS$HELP
                   5. Do not display, print or copy release notes

               * Select option [3]:<RET>

             If you select option 1, VMSINSTAL displays the release notes
             on line immediately. You can terminate the display at any
             time by pressing CTRL/C.

             If you select option 2, VMSINSTAL prompts you for a queue
             name. Either type a queue name or press RETURN to send the
             file to the default output print device.

               * Queue name [SYS$PRINT]:<RET>

             If you select option 3, VMSINSTAL displays the release notes
             on line immediately. You can terminate the display at any
             time by pressing CTRL/C. VMSINSTAL then prompts you for a
             queue name.











                                           Installing DEC PHIGS for VMS 13

 






             Either type a queue name or press RETURN to send the file to
             the default output print device. The release notes are then
             copied:

              o The DEC PHIGS development kit release notes are copied to
                SYS$HELP:DECPHIGS022.RELEASE_NOTES.

              o The DEC PHIGS run-time kit release notes are copied to
                SYS$HELP:DECPHIGSRTO022.RELEASE_NOTES.

             If you select option 4, VMSINSTAL copies the release notes to
             SYS$HELP immediately.

             If you select option 5, VMSINSTAL does not display, print, or
             copy the release notes. Typically, this option is selected
             when the user wants to terminate the installation.

                                          NOTE

                 This version of the release notes file installed by
                 VMSINSTAL is labeled with the current product name and
                 version number. Take care not to delete release notes
                 for previous versions of DEC PHIGS.

             Next, VMSINSTAL displays the following prompt:

               * Do you want to continue the installation [N]?:Y <RET>
               %VMSINSTAL-I-RELMOVED, The product release notes have been successfully
                   moved to SYS$HELP.

             If you want to continue the installation, type YES and press
             RETURN. If you type NO or just press RETURN, VMSINSTAL dis-
             continues the installation. In either case, VMSINSTAL moves
             the release notes to SYS$HELP.





          14  Installing DEC PHIGS for VMS

 






             Step 5: Select installation options.

               * Do you want to purge files replaced by this installation [YES]?<RET>

             The directories SYS$LIBRARY and SYS$SYSTEM may contain pre-
             vious versions of DEC PHIGS files. These files are replaced
             during the installation with new files, but the old files are
             not automatically purged. Purging is recommended. In response
             to the purging prompt, press RETURN to purge the files or
             type NO to keep them.

             Table 1 lists the files on the system that are added or
             modified when installing the DEC PHIGS development kit.

             Table 1:  Installed Files for the DEC PHIGS Development Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

             SYS$STARTUP:  PHIGS$STARTUP.COM

                           PCM$STARTUP.COM

             SYS$MESSAGE:  PHIGS$MSGS.EXE

                           VAXGFX$MSGS.EXE

             SYS$MANAGER:  PHIGS$DEINSTALL_V10.COM

                           PHIGS$DEINSTALL_V11.COM

                           PHIGS$REMOVE_V10.COM

             SYS$SYSTEM:   DECW$SERVER_MAIN.EXE

                           PCM$SERVER.EXE
             _____________________________________________________________
                                                  (continued on next page)


                                           Installing DEC PHIGS for VMS 15

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

             SYS$LIBRARY:  DECW$SERVER_DDX_GA.EXE

                           DECW$SERVER_DDX_GB.EXE

                           DECW$SERVER_DDX_GC.EXE

                           DECW$SERVER_DDX_GE.EXE

                           DECW$SERVER_DIX.EXE

                           DECW$SERVER_EXTENSION_PEX.EXE

                           DECW$SVEXT_ADOBE_DPS_EXTENSION.EXE

                           DECW$SVEXT_X3D_PEX_GB.EXE

                           DECW$SSVEXT_X3D_PEX_GE.EXE

                           PHIGS$ARCHIVE_CONVERTER.EXE

                           PHIGS$CRTL.EXE

                           PHIGS$DBM.EXE

                           PHIGS$DEFS.BAS

                           PHIGS$DEFS.FOR
             _____________________________________________________________
                                                  (continued on next page)





          16  Installing DEC PHIGS for VMS

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           PHIGS$DEFS.H

                           PHIGS$DEFS.PAS

                           PHIGS$DEFS.PLI

                           PHIGS$DEFS.PL2

                           PHIGS$FOR_BND.OLB

                           PHIGS$FOR_BND_CONSTS.FOR

                           PHIGS$GB_UCODE.EXE

                           PHIGS$I3D.EXE

                           PHIGS$MSGS.BAS

                           PHIGS$MSGS.FOR

                           PHIGS$MSGS.H

                           PHIGS$MSGS.PAS

                           PHIGS$MSGS.PL2

                           PHIGS$MSGS.PLI
             _____________________________________________________________
                                                  (continued on next page)





                                           Installing DEC PHIGS for VMS 17

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           PHIGS$RTL.EXE

                           PHIGS$WSIM.EXE

                           PHIGS$WSM.EXE

                           PHIGS.H

                           PHIGS_DEFS.ADA

                           PHIGS_DEFS.BAS

                           PHIGS_DEFS.FOR

                           PHIGS_DEFS.H

                           PHIGS_DEFS.PAS

                           PHIGS_DEFS.PL2

                           PHIGS_DEFS.PLI

                           PHIGS_MSGS.ADA

                           PHIGS_MSGS.BAS

                           PHIGS_MSGS.FOR
             _____________________________________________________________
                                                  (continued on next page)





          18  Installing DEC PHIGS for VMS

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           PHIGS_MSGS.H

                           PHIGS_MSGS.PAS

                           PHIGS_MSGS.PL2

                           PHIGS_MSGS.PLI

                           VAXGFX$COLSIX_DEV_HANDLER.EXE

                           VAXGFX$DDIF_COLOR_TABLE.DAT

                           VAXGFX$DDIF_DEV_HANDLER.EXE

                           VAXGFX$DECW_DEV_HANDLER.EXE

                           VAXGFX$FONT_NEG01.FNT

                           VAXGFX$FONT_NEG02.FNT

                           VAXGFX$FONT_NEG03.FNT

                           VAXGFX$FONT_NEG04.FNT

                           VAXGFX$FONT_NEG05.FNT

                           VAXGFX$FONT_NEG06.FNT
             _____________________________________________________________
                                                  (continued on next page)





                                           Installing DEC PHIGS for VMS 19

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           VAXGFX$FONT_NEG07.FNT

                           VAXGFX$FONT_NEG08.FNT

                           VAXGFX$FONT_NEG09.FNT

                           VAXGFX$FONT_NEG10.FNT

                           VAXGFX$FONT_NEG11.FNT

                           VAXGFX$FONT_NEG12.FNT

                           VAXGFX$FONT_NEG13.FNT

                           VAXGFX$FONT_NEG14.FNT

                           VAXGFX$FONT_NEG15.FNT

                           VAXGFX$FONT_NEG16.FNT

                           VAXGFX$FONT_NEG17.FNT

                           VAXGFX$FONT_NEG18.FNT

                           VAXGFX$FONT_NEG19.FNT

                           VAXGFX$FONT_NEG20.FNT
             _____________________________________________________________
                                                  (continued on next page)





          20  Installing DEC PHIGS for VMS

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           VAXGFX$FONT_NEG21.FNT

                           VAXGFX$FONT_NEG22.FNT

                           VAXGFX$FONT_NEG23.FNT

                           VAXGFX$FONT_NEG24.FNT

                           VAXGFX$HPGL_DEV_HANDLER.EXE

                           VAXGFX$PS_DEV_HANDLER.EXE

                           VAXGFX$REGIS_DEV_HANDLER.EXE

                           VAXGFX$RTL.EXE

                           VAXGFX$SIXEL_DEV_HANDLER.EXE

                           VAXGFX$TEK41_DEV_HANDLER.EXE

                           VAXGFX$TEK_DEV_HANDLER.EXE

                           VAXGFX$UIS_DEV_HANDLER.EXE

             SYS$TEST:     PHIGS_IVP.EXE

             SYS$FONT:     PHIGS$MARKERS.VWS$FONT (After UIS only)
             _____________________________________________________________
                                                  (continued on next page)





                                           Installing DEC PHIGS for VMS 21

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           PHIGS$MARKERS.VWS$VAFONT (After UIS only)

             SYS$HELP:     DECPHIGS022.RELEASE_NOTES

                           HELPLIB.HLB (modified)

             SYS$COMMON:[SYSHLP.EXAMPLES.PHIGS]:

                           PHIGS_DEMO_BUILD.COM

                           PHIGS$DEMO.ARC

                           PHIGS_DEMO_BUILD.OPT

                           PHIGS_DEMO_CHANGE_OBJECT_SIZE.C

                           PHIGS_DEMO_CHANGE_VIEW_ANGLE.C

                           PHIGS_DEMO_CREATE_OBJECT.C

                           PHIGS_DEMO_CREATE_STRUCT.C

                           PHIGS_DEMO_MOVE_VIEW_PLANES.C

                           PHIGS_DEMO_PHIGS.C

                           PHIGS_DEMO_PHIGS.EXE
             _____________________________________________________________
                                                  (continued on next page)





          22  Installing DEC PHIGS for VMS

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           PHIGS_DEMO_PHIGS.H

                           PHIGS_DEMO_README.TXT

                           PHIGS_DEMO_ROTATE_OBJECT.C

                           PHIGS_DEMO_TRANSLATE_OBJECT.C

                           PHIGS_RINGS_3D.FOR

                           PHIGS_XDEMO.C

             SYS$COMMON:[SYSHLP.EXAMPLES.PHIGS.GETTING_STARTED]:

                           PHIGS_GS_ARCS.C

                           PHIGS_GS_FILL_AREA.C

                           PHIGS_GS_LIGHT.C

                           PHIGS_GS_LINE_COLOR.C

                           PHIGS_GS_LINE_TYPES.C

                           PHIGS_GS_LINE_WIDTHS.C

                           PHIGS_GS_NAME_SETS.C
             _____________________________________________________________
                                                  (continued on next page)





                                           Installing DEC PHIGS for VMS 23

 






             Table 1 (Cont.):  Installed Files for the DEC PHIGS Development
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           PHIGS_GS_NURBS.C

                           PHIGS_GS_POLYLINES.C

                           PHIGS_GS_REQUEST.C

                           PHIGS_GS_SAMPLE.FOR

                           PHIGS_GS_SIMPLE.C

                           PHIGS_GS_TEAPOT.C

             ______________PHIGS_GS_TEXT.C________________________________


             Table 2 lists the files on the system that are added or
             modified when installing the DEC PHIGS run-time kit.

             Table 2:  Installed Files for the DEC PHIGS Run-Time Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

             SYS$STARTUP:  PHIGS$STARTUP.COM

                           PCM$STARTUP.COM

             SYS$MESSAGE:  PHIGS$MSGS.EXE

                           VAXGFX$MSGS.EXE
             _____________________________________________________________
                                                  (continued on next page)



          24  Installing DEC PHIGS for VMS

 






             Table 2 (Cont.):  Installed Files for the DEC PHIGS Run-Time
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

             SYS$MANAGER:  PHIGS$DEINSTALL_V10.COM

                           PHIGS$DEINSTALL_V11.COM

                           PHIGS$REMOVE_V10.COM

             SYS$SYSTEM:   DECW$SERVER_MAIN.EXE

                           PCM$SERVER.EXE

             SYS$LIBRARY:  DECW$SERVER_DDX_GA.EXE

                           DECW$SERVER_DDX_GB.EXE

                           DECW$SERVER_DDX_GC.EXE

                           DECW$SERVER_DDX_GE.EXE

                           DECW$SERVER_DIX.EXE

                           DECW$SERVER_EXTENSION_PEX.EXE

                           DECW$SERVER_MAIN.EXE

                           DECW$SVEXT_ADOBE_DPS_EXTENSION.EXE

                           DECW$SVEXT_X3D_PEX_GB.EXE
             _____________________________________________________________
                                                  (continued on next page)





                                           Installing DEC PHIGS for VMS 25

 






             Table 2 (Cont.):  Installed Files for the DEC PHIGS Run-Time
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           DECW$SSVEXT_X3D_PEX_GE.EXE

                           PHIGS$ARCHIVE_CONVERTER.EXE

                           PHIGS$CRTL.EXE

                           PHIGS$DBM.EXE

                           PHIGS$GB_UCODE.EXE

                           PHIGS$I3D.EXE

                           PHIGS$RTL.EXE

                           PHIGS$WSIM.EXE

                           PHIGS$WSM.EXE

                           VAXGFX$COLSIX_DEV_HANDLER.EXE

                           VAXGFX$DDIF_COLOR_TABLE.DAT

                           VAXGFX$DDIF_DEV_HANDLER.EXE

                           VAXGFX$DECW_DEV_HANDLER.EXE

                           VAXGFX$FONT_NEG01.FNT
             _____________________________________________________________
                                                  (continued on next page)





          26  Installing DEC PHIGS for VMS

 






             Table 2 (Cont.):  Installed Files for the DEC PHIGS Run-Time
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           VAXGFX$FONT_NEG02.FNT

                           VAXGFX$FONT_NEG03.FNT

                           VAXGFX$FONT_NEG04.FNT

                           VAXGFX$FONT_NEG05.FNT

                           VAXGFX$FONT_NEG06.FNT

                           VAXGFX$FONT_NEG07.FNT

                           VAXGFX$FONT_NEG08.FNT

                           VAXGFX$FONT_NEG09.FNT

                           VAXGFX$FONT_NEG10.FNT

                           VAXGFX$FONT_NEG11.FNT

                           VAXGFX$FONT_NEG12.FNT

                           VAXGFX$FONT_NEG13.FNT

                           VAXGFX$FONT_NEG14.FNT

                           VAXGFX$FONT_NEG15.FNT
             _____________________________________________________________
                                                  (continued on next page)





                                           Installing DEC PHIGS for VMS 27

 






             Table 2 (Cont.):  Installed Files for the DEC PHIGS Run-Time
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           VAXGFX$FONT_NEG16.FNT

                           VAXGFX$FONT_NEG17.FNT

                           VAXGFX$FONT_NEG18.FNT

                           VAXGFX$FONT_NEG19.FNT

                           VAXGFX$FONT_NEG20.FNT

                           VAXGFX$FONT_NEG21.FNT

                           VAXGFX$FONT_NEG22.FNT

                           VAXGFX$FONT_NEG23.FNT

                           VAXGFX$FONT_NEG24.FNT

                           VAXGFX$HPGL_DEV_HANDLER.EXE

                           VAXGFX$PS_DEV_HANDLER.EXE

                           VAXGFX$REGIS_DEV_HANDLER.EXE

                           VAXGFX$RTL.EXE

                           VAXGFX$SIXEL_DEV_HANDLER.EXE
             _____________________________________________________________
                                                  (continued on next page)





          28  Installing DEC PHIGS for VMS

 






             Table 2 (Cont.):  Installed Files for the DEC PHIGS Run-Time
                               Kit
             _____________________________________________________________
             Directory_____File_Name______________________________________

                           VAXGFX$TEK41_DEV_HANDLER.EXE

                           VAXGFX$TEK_DEV_HANDLER.EXE

                           VAXGFX$UIS_DEV_HANDLER.EXE

             SYS$TEST:     PHIGS_IVP.EXE

             SYS$FONT:     PHIGS$MARKERS.VWS$FONT (After UIS only)

                           PHIGS$MARKER.VWS$VAFONT (After UIS only)

             SYS$HELP:_____DECPHIGSRTO022.RELEASE_NOTES___________________


             Step 6: Respond to License Registration Queries.

             DEC PHIGS supports the VMS License Management Facility (LMF).
             The installation procedure displays license information about
             your product and then asks if you have registered and loaded
             your authorization key for DEC PHIGS. The following is an
             example of this information:












                                           Installing DEC PHIGS for VMS 29

 






             DEC PHIGS DEVELOPMENT KIT

                  Product:       PHIGS
                  Producer:      DEC
                  Version:       2.2
                  Release Date:  01-JUL-1990

                  * Does this product have an authorization key registered
                              and loaded?YES <RET>

             DEC PHIGS RUN-TIME KIT

                  Product:       PHIGS-RUNTIME
                  Producer:      DEC
                  Version:       2.2
                  Release Date:  01-JUL-1990

                  * Does this product have an authorization key registered
                              and loaded?YES <RET>

             If you have not registered and loaded your authorization
             key, you must answer NO to this question. You must register
             and load your product authorization key to successfully
             complete the installation. If you have not done so, you
             should stop the installation, register and load your product
             authorization key, and then restart the installation.

             Step 7: Install the PHIGS help library (DEC PHIGS development
             kit only).

               * Do you wish to have the help library for PHIGS [YES]?<RET>

             Press RETURN if you want to include the PHIGS help library.
             Type NO if you do not want the help library.





          30  Installing DEC PHIGS for VMS

 






             Step 8: Install examples from PHIGS documentation (DEC PHIGS
             development kit only).

               * Do you wish to install the examples from the PHIGS
               documentation [YES]?<RET>

             Press RETURN if you want to install the example programs from
             the Getting Started with DEC PHIGS manual. Type NO if you do
             not want the programs.

             Step 9: Reading the informational messages.

             The DEC PHIGS installation procedure produces a number of
             informational messages that report on the progress of the
             installation.

             The success of the installation is indicated by the following
             message:

               %VMSINSTAL-I-MOVEFILES, files will now be moved to their target
               directories...

             This message is displayed towards the end of the informa-
             tional messages. If the installation procedure is successful,
             the new or modified files are moved to their target directo-
             ries.

             The following paragraph is displayed for the DEC PHIGS devel-
             opment kit installation only:

                   STARTING to perform all the installation work. If you are
                   using a multi-media kit you will be prompted to insert the
                   next distribution media, otherwise no additional user actions
                   are necessary from this point.

               %VMSINSTAL-I-RESTORE, Restoring product saveset B ...
               %VMSINSTAL-I-RESTORE, Restoring product saveset C ...
               %VMSINSTAL-I-RESTORE, Restoring product saveset D ...
               %VMSINSTAL-I-RESTORE, Restoring product saveset E ...

                                           Installing DEC PHIGS for VMS 31

 






             The following paragraph is displayed for the DEC PHIGS run-
             time kit installation only:

                   STARTING to perform all the installation work. If you are
                   using a multi-media kit you will be prompted to insert the
                   next distribution media, otherwise no additional user actions
                   are necessary from this point.

               %VMSINSTAL-I-RESTORE, Restoring product saveset B ...
               %VMSINSTAL-I-RESTORE, Restoring product saveset C ...
               %VMSINSTAL-I-RESTORE, Restoring product saveset D ...

             The messages for both DEC PHIGS kits continue as follows:

                   No user actions are necessary from this point.
                   The remaining part of the installation will take
                   ( 5 - 20 minutes ) depending on your CPU.

                The DEC PHIGS on VMS run-time library has been processed successfully.

                The installation procedure is continuing...

                   The DEC PHIGS on VMS VAXstation marker fonts have been processed successfully.

                   The installation procedure is continuing...

                   DEC PHIGS on VMS shared images successfully processed.

                   System Manager:

                   Upon completion of this installation, please be sure to
                   edit the system startup files and add the following line:

                   $ @SYS$STARTUP:PHIGS$STARTUP.COM

                   If you have a graphics peripheral set installed on your workstation,
                   also add the line:


          32  Installing DEC PHIGS for VMS

 







                   $ @SYS$STARTUP:PCM$STARTUP.COM

                   A copy of the Installation Verification Procedure will be put in
                   SYS$COMMON:[SYSTEST]PHIGS_IVP.EXE.

                   This installation procedure has replaced the DECwindows
                   server on your system.  If you are installing DEC PHIGS on
                   a workstation, you should reboot the system and then run
                   SYS$COMMON:[SYSTEST]PHIGS_IVP.EXE to complete the installation.

                   A PHIGS demo program, along with its sources will be put in
                   SYS$COMMON:[SYSHLP.EXAMPLES.PHIGS].

                   The following files are part of DEC PHIGS V1.0 systems and are
                   no longer required as part of V2.2.  The system manager should
                   review these files and his configuration and remove them when
                   he deems appropriate.  The command file in sys$manager: called
                   phigs$remove_v10.com has been provided to assist in deleting
                   the appropriate files.

                   SYS$LIBRARY:PHIGS$*_DEV_HANDLER.EXE
                   SYS$LIBRARY:PHIGS$FONT_*.FNT

                 %VMSINSTAL-I-MOVEFILES, files will now be moved to their target
                           directories...


             If the installation procedure is successful, the PHIGS files
             are moved to their target directories.

             In addition, SYS$HELP:HELPLIB.HLB is updated to include the
             new version of the DEC PHIGS help text. The release notes are
             then copied:

              o The DEC PHIGS development kit release notes are copied to
                SYS$HELP:DECPHIGS022.RELEASE_NOTES.


                                           Installing DEC PHIGS for VMS 33

 






              o The DEC PHIGS run-time kit release notes are copied to
                SYS$HELP:DECPHIGSRTO022.RELEASE_NOTES.

             Step 10: End the installation procedure.

             DEC PHIGS DEVELOPMENT KIT

               Installation of DECPHIGS V2.2 completed at 15:30

               VMSINSTAL procedure done at 15:30

               $ LOGOUT <RET>
               SYSTEM logged out at 14-JUN-1990 13:48:02.47

             DEC PHIGS RUN-TIME KIT

               Installation of DECPHIGSRTO V2.2 completed at 15:30

               VMSINSTAL procedure done at 15:30

               $ LOGOUT <RET>
               SYSTEM logged out at 14-JUN-1990 13:48:02.47

             When the installation procedure is complete, you can choose
             to install more products or to log out (as shown). If you
             removed any media from the console drive before beginning the
             installation, you should replace it now.

             VMSINSTAL deletes or changes entries in the process symbol
             tables during the installation. Therefore, if you plan to
             continue using the system manager's account and you want to
             restore these symbols, you should log out and log in again.







          34  Installing DEC PHIGS for VMS

 





          ____________________________________________________________

          Installing DEC PHIGS on a VAXcluster

             If you want to run DEC PHIGS on multiple nodes of a
             VAXcluster, first check to see that you have the appropriate
             software license. Then, follow these steps after installing
             DEC PHIGS:

              1. Issue the LICENSE LOAD command to activate the license
                on each node in the VAXcluster on which DEC PHIGS is to
                be executed. Issue the command as described in the VMS
                License Management Utility Manual.

              2. Run SYS$STARTUP:PHIGS$STARTUP.COM on each node of the
                cluster that has a software license.

             Do not purge files during the installation. You can purge
             these files after you have run the DEC PHIGS startup command
             procedure on each node of the cluster.

          ____________________________________________________________

          After the Installation

             DEC PHIGS is now installed and can be invoked by all users
             with the PHIGS$STARTUP.COM command.

             You must edit the file SYS$STARTUP:SYSTARTUP_V5.COM to invoke
             the startup procedure PHIGS$STARTUP.COM. This procedure
             runs the DEC PHIGS startup routine whenever you reboot your
             system. To include the procedure in your startup file, edit
             SYS$MANAGER:SYSTARTUP_V5.COM and add the following line:

               $ @SYS$STARTUP:PHIGS$STARTUP

             If you installed DEC PHIGS on a cluster, PHIGS$STARTUP.COM
             is automatically executed for the system node from which the
             installation was performed. However, you may also need to
             execute this file for other nodes in the cluster to get the
             newest DEC PHIGS images installed on those systems. This is
             particularly true if you purged older versions of DEC PHIGS
             during the installation.

                                           Installing DEC PHIGS for VMS 35

 






             If an earlier version of DEC PHIGS exists on your system, and
             you replaced it with the most recent version of DEC PHIGS, be
             sure to remove the command that runs the startup file for the
             earlier version.

          ____________________________________________________________

          Completing the Installation

             A copy of the Installation Verification Procedure (IVP) will
             be put in SYS$COMMON:[SYSTEST]PHIGS_IVP.EXE. This program
             should be run after rebooting the system to complete the
             installation of DEC PHIGS. The IVP verifies that the instal-
             lation procedure was successfully completed, and ensures the
             integrity of installed files if system problems occur. To run
             the IVP separately, execute the following command:

               $ RUN SYS$COMMON:[SYSTEST]PHIGS_IVP.EXE <RET>

             If the IVP runs successfully, it generates the picture shown
             in Figure 1. If your device produces color output, the image
             will appear in color.

















          36  Installing DEC PHIGS for VMS

 






          ________________________________________________________________

          ____________________________________________________________

          Error Conditions

             If the installation procedure fails for any reason, the
             following message is displayed:

               %VMSINSTAL-E-INSTAIL, The installation of DECPHIGS 2.2 has failed.

             An error during the installation can occur if one or more of
             the following conditions exist:

              o The operating system version is incorrect.

              o A prerequisite software version is incorrect.

              o Quotas necessary for successful installation are insuffi-
                cient (see the section entitled "Installation Procedure
                Requirements").

              o Process quotas required by VMSINSTAL are incorrect (see
                the section entitled "Using VMSINSTAL").

              o The VMS HELP library is currently in use.

              o The product was registered incorrectly or not registered.

              o Your DEC PHIGS software license is not installed.

             For descriptions of the error messages generated by these
             conditions, see VMS Volume 6-System Messages, your processor-
             specific installation/operations guide, or the VMS License
             Management Utility Manual.

             If you are notified that any of these conditions exist, you
             should take the appropriate action as described in the mes-
             sage. You may need to change a system parameter or increase
             an authorized quota value.

                                           Installing DEC PHIGS for VMS 37

 






             If the installation procedure fails, one or more of the
             following messages may also appear. These messages notify
             you of fatal errors caused by incorrect preparation for
             installation.

               This kit requires VMS V5.3-1 or a subsequent version of VMS

               System disk does not contain enough free blocks to install DECPHIGS

               Insufficient CLISYMTBL pages - the installation of DECPHIGS
               requires at least 150 pages. Use SYSGEN to change this
               parameter and restart the installation.

             If one of these messages is displayed, review the section
             entitled "Preparing to Install DEC PHIGS " and repeat the
             installation procedure.

             If the following error occurs, VMSINSTAL asks whether you
             want to continue the installation. If you continue, be aware
             that DEC PHIGS may not run properly.

               WARNING - this is an UPGRADE FTxx baselevel of VMS.
               Unable to decode the VMS version number. This may or
               may not be the correct version of VMS for this PHIGS. This
               version of DEC PHIGS supports VMS V5.3-1 or a subsequent version of VMS.

             The following warning message may appear during a successful
             installation:

               WARNING: The machine which you are running on does not
               support the D floating point format in hardware. This
               may cause the degradation of performance of many
               of DEC PHIGS's routines.






          38  Installing DEC PHIGS for VMS

 






             If the Installation Verification Procedure fails for any
             reason, the following message is displayed:

               DEC PHIGS V2.2 Installation Verification Procedure failed.
               Please consult the DEC PHIGS Installation Guide for further information.

             If you receive this message, and all the previous condi-
             tions listed are correct, contact your Digital field service
             representative.

          ____________________________________________________________

          Maintenance Updates

             Digital may periodically issue maintenance updates of DEC
             PHIGS. Each update contains an installation kit. You should
             install this kit as described in this document or in any
             documentation that may accompany the maintenance update.

             Each time a maintenance update is released, the version num-
             ber changes. For example, if the current version is 2.2, the
             version number of the next maintenance update will be 2.3. In
             addition, each maintenance update includes new release notes.
             The release notes describe the changes that have been made to
             DEC PHIGS since the previous release.

             The updated release notes are provided on line. You should
             read the release notes when you first install DEC PHIGS;
             they are also accessible at any time after the product is
             installed. For information on reading the release notes at
             the time that you install DEC PHIGS, follow the installation
             procedure described in the section entitled "Installing DEC
             PHIGS for VMS" through step 4.

             To read the release notes after DEC PHIGS is installed, dis-
             play or print the file SYS$HELP:DECPHIGS022.RELEASE_NOTES for
             the DEC PHIGS development kit, or SYS$HELP:DECPHIGSRTO022.RELEASE_
             NOTES for the DEC PHIGS run-time kit.

                                           Installing DEC PHIGS for VMS 39

 





          ____________________________________________________________

          Determining and Reporting Problems

             If an error occurs while you are using DEC PHIGS, report it
             to Digital. Depending on the nature of the problem and the
             type of support you have, you can take one of the following
             actions:

              o Call Digital if your software contract or warranty agree-
                ment entitles you to telephone support.

              o Submit a Software Performance Report (SPR).

              o Fill out and submit a Reader's Comments form if the prob-
                lem has to do with the DEC PHIGS documentation. There are
                Reader's Comments forms at the back of each manual. Use
                the form from the manual in which you found the error.
                Include the page number.

             Review the Software Product Description (SPD) and Warranty
             Addendum for an explanation of warranty. If you encounter
             a problem during the warranty period, report the problem
             as indicated in this section or follow alternate instruc-
             tions provided by Digital for reporting SPD nonconformance
             problems.

          ____________________________________________________________

          DEC PHIGS Development Kit Sample Installation

             This section contains a sample installation of the DEC PHIGS
             development kit. Note that this is only a sample. Sometimes
             the installation procedure is modified in maintenance up-
             dates of this product. Because this installation guide is
             not usually revised for maintenance updates, be sure to read
             the Read Before Installing or Using DEC PHIGS for VMS let-
             ter before you install this product. This letter notes any
             significant changes in the installation that vary from this
             sample.

          40  Installing DEC PHIGS for VMS

 






             Also note that this sample is for VMS Versions 5.3-1. Refer
             to the section entitled "Installing DEC PHIGS " for detailed
             information.

               $ @vmsinstal <RET>

                       VAX/VMS Software Product Installation Procedure V5.3-1

               It is 14-JUN-1990 at 12:57.

               Enter a question mark (?) at any time for help.

               * Are you satisfied with the backup of your system disk [YES]? <RET>
               * Where will the distribution volumes be mounted: media <RET>

               Enter the products to be processed from the first distribution volume set.
               * Products: decphigs022
               * Enter installation options you wish to use (none):
               The following products will be processed:

                 DECPHIGS V2.2

                       Beginning installation of DECPHIGS V2.2 at 12:58

               %VMSINSTAL-I-RESTORE, Restoring product save set A ...
               %VMSINSTAL-I-RELMOVED ,The product's release notes have been successfully
               moved to SYS$HELP.

               * Do you want to purge files replaced by this installation [YES]? n <RET>

                       Product:      PHIGS
                       Producer:     DEC
                       Version:      2.2
                       Release Date: 01-JUL-1990

               * Does this product have an authorization key registered and loaded? y <RET>

               * Do you wish to have the help library for PHIGS [YES]? <RET>

               * Do you wish to install the examples from the PHIGS documentation [YES]? <RET>

                                           Installing DEC PHIGS for VMS 41

 






                       STARTING to perform all the installation work.  If you are
                       using a multi-media kit you will be prompted to insert the
                       next distribution media, otherwise no additional user actions
                       are necessary from this point.

               %VMSINSTAL-I-RESTORE, Restoring product save set B ...
               %VMSINSTAL-I-RESTORE, Restoring product save set C ...
               %VMSINSTAL-I-RESTORE, Restoring product save set D ...
               %VMSINSTAL-I-RESTORE, Restoring product save set E ...

                       No user actions are necessary from this point.
                       The remaining part of the installation will take
                       ( 5 - 20 minutes ) depending on your CPU.

                       The DEC PHIGS on VMS run-time library has been processed successfully.

                       The installation procedure is continuing...

                       The DEC PHIGS ON VMS VAXstation marker fonts have been processed successfully.

                       The installation procedure is continuing...

                       DEC PHIGS for VMS shared images successfully processed.

                 System Manager:

                       Upon completion of this installation, please be sure to
                       edit the system startup files and add the following line:

                       $ @SYS$STARTUP:PHIGS$STARTUP.COM

                       If you have a graphics peripheral set installed on your workstation,
                       also add the line:

                       $ @SYS$STARTUP:PCM$STARTUP.COM

                       A copy of the Installation Verification Procedure will be put in
                       SYS$COMMON:[SYSTEST]PHIGS_IVP.EXE.

                       This installation procedure has replaced the DECwindows
                       server on your system.  If you are installing DEC PHIGS on
                       a workstation, you should reboot the system and then run
                       SYS$COMMON:[SYSTEST]PHIGS_IVP.EXE to complete the installation.

          42  Installing DEC PHIGS for VMS

 






                       A PHIGS demo program, along with its sources will be put in
                       SYS$COMMON:[SYSHLP.EXAMPLES.PHIGS].

                       The following files are part of DEC PHIGS V1.0 systems and are
                       no longer required as part of V2.2.  The system manager should
                       review these files and his configuration and remove them when
                       he deems appropriate.  The command file in sys$manager: called
                       phigs$remove_v10.com has been provided to assist in deleting
                       the appropriate files.

                       SYS$LIBRARY:PHIGS$*_DEV_HANDLER.EXE
                       SYS$LIBRARY:PHIGS$FONT_*.FNT

               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
                       Installation of DECPHIGS V2.2 completed at 13:09

               Enter the products to be processed from the next distribution volume set.
               * Products:
                       VMSINSTAL procedure done at 13:48




















                                           Installing DEC PHIGS for VMS 43

 





          ____________________________________________________________

          DEC PHIGS Run-Time Kit Sample Installation

             This section contains a sample installation of the DEC PHIGS
             run-time kit. Note that this is only a sample. Sometimes the
             installation procedure is modified in maintenance updates of
             this product. Because this installation guide is not usually
             revised for maintenance updates, be sure to read the Read
             Before Installing or Using DEC PHIGS for VMS letter before
             you install this product. This letter notes any significant
             changes in the installation that vary from this sample.

             Also note that this sample is for VMS Versions 5.3-1. Refer
             to the section entitled "Installing DEC PHIGS " for detailed
             information.

               $ @vmsinstal <RET>

                       VAX/VMS Software Product Installation Procedure V5.3-1

               It is 14-JUN-1990 at 14:40.

               Enter a question mark (?) at any time for help.

               * Are you satisfied with the backup of your system disk [YES]? <RET>
               * Where will the distribution volumes be mounted: media <RET>

               Enter the products to be processed from the first distribution volume set.
               * Products: decphigsrto022
               The following products will be processed:

                 DECPHIGSRTO V2.2

                       Beginning installation of DECPHIGSRTO V2.2 at 15:01

               %VMSINSTAL-I-RESTORE, Restoring product save set A ...
               %VMSINSTAL-I-RELMOVED, The product's release notes have been successfully
               moved to SYS$HELP.

               * Do you want to purge files replaced by this installation [YES]? n <RET>

          44  Installing DEC PHIGS for VMS

 






                       Product:      PHIGS-RUNTIME
                       Producer:     DEC
                       Version:      2.2
                       Release Date: 01-JUL-1990

               * Does this product have an authorization key registered and loaded? y <RET>

                       STARTING to perform all the installation work.  If you are
                       using a multi-media kit you will be prompted to insert the
                       next distribution media, otherwise no additional user actions
                       are necessary from this point.

               %VMSINSTAL-I-RESTORE, Restoring product save set B ...
               %VMSINSTAL-I-RESTORE, Restoring product save set C ...
               %VMSINSTAL-I-RESTORE, Restoring product save set D ...

                       No user actions are necessary from this point.
                       The remaining part of the installation will take
                       ( 5 - 20 minutes ) depending on your CPU.

                       The DEC PHIGS on VMS run-time library has been processed successfully.

                       The installation procedure is continuing...

                The DEC PHIGS ON VMS VAXstation marker fonts have been processed successfully.

                       The installation procedure is continuing...

                       DEC PHIGS for VMS shared images successfully processed.

                 System Manager:

                       Upon completion of this installation, please be sure to
                       edit the system startup files and add the following line:

                       $ @SYS$STARTUP:PHIGS$STARTUP.COM

                       If you have a graphics peripheral set installed on your workstation,
                       also add the line:

                       $ @SYS$STARTUP:PCM$STARTUP.COM

                       A copy of the Installation Verification Procedure will be put in
                       SYS$COMMON:[SYSTEST]PHIGS_IVP.EXE.

                                           Installing DEC PHIGS for VMS 45

 






                       This installation procedure has replaced the DECwindows
                       server on your system.  If you are installing DEC PHIGS on
                       a workstation, you should reboot the system and then run
                       SYS$COMMON:[SYSTEST]PHIGS_IVP.EXE to complete the installation.

                       A PHIGS demo program, along with its sources will be put in
                       SYS$COMMON:[SYSHLP.EXAMPLES.PHIGS].

                       The following files are part of DEC PHIGS V1.0 systems and are
                       no longer required as part of V2.2.  The system manager should
                       review these files and his configuration and remove them when
                       he deems appropriate.  The command file in sys$manager: called
                       phigs$remove_v10.com has been provided to assist in deleting
                       the appropriate files.

                       SYS$LIBRARY:PHIGS$*_DEV_HANDLER.EXE
                       SYS$LIBRARY:PHIGS$FONT_*.FNT

               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
                       Installation of DECPHIGSRTO V2.2 completed at 15:08

               Enter the products to be processed from the next distribution volume set.
               * Products:
                       VMSINSTAL procedure done at 15:11















          46  Installing DEC PHIGS for VMS
