 






                                                 Order Number: AV-PEA0A-TE


                                  ALL-IN-1 STARTER

                                    READ ME FIRST



          Introduction

             This document is for the person responsible for installing
             the ALL-IN-1 STARTER software. It describes:

              o What your ALL-IN-1 STARTER Version 2.4 kit contains

              o Where to find installation information

              o The order in which you should install the products in the
                kit

              o CDA Patch kit and release note information

          Note: The Release Notes may contain further information about
             installation. Before you start installation, print the
             Release Notes (see the ALL-IN-1 STARTER Installation
             Guide Part 1 Base Installation) and read the section on
             installation.

          ALL-IN-1 STARTER Version 2.4 Kit Contents

             Your ALL-IN-1 STARTER Version 2.4 kit contains all the
             products required to run ALL-IN-1 STARTER:

              o VAX FMS Version 2.4

              o ALL-IN-1 STARTER Version 2.4

              o WPS-PLUS Version 3.1

              o CDA Converter Library Version 1.0

              o CDA Patch Kit for VMS Version 5.3

                                                                         1

 






              o Message Router Version 3.1B

             Note If your system is running Message Router Version 3.1 or
                earlier, you must upgrade to Message Router Version 3.1B.

              o Message Router VMSmail Gateway Version 3.1

          Components and Installation Information for ALL-IN-1 STARTER
          Version 2.4

             ALL-IN-1 STARTER Version 2.4 is an international product and
             consists of the following components:

              o An international base component, which provides the
                functions that are common to all ALL-IN-1 STARTER Version
                2.4 systems.

              o A language component, which provides the ALL-IN-1 STARTER
                Version 2.4 language-specific features. For example, User
                Interface features.

              o A market component, which provides features that are
                specific to a given market. For example, keyboard and
                modem support.

             Each component is supplied on separate media. The language
             component and the market component consist of two pieces of
             media; one containing the software and the other containing
             the appropriate part of the Release Notes.

             Installation Guide

             The ALL-IN-1 STARTER Installation Guide is in three parts:

              o ALL-IN-1 STARTER Installation Guide Part 1 Base Installation

                This part describes how to install ALL-IN-1 STARTER
                Version 2.4. Although it is a large book, you need only
                refer to the chapters relating to the type of installation
                that you are going to perform.

          2

 






              o ALL-IN-1 STARTER Installation Guide Part 2 Language
                Installation

                This part contains information specific to the language
                that you are installing; a version is supplied with each
                language component. Refer to this part as indicated
                in the ALL-IN-1 STARTER Installation Guide Part 1 Base
                Installation.

              o ALL-IN-1 STARTER Installation Guide Part 3 Market
                Installation

                This part contains information specific to your market
                component. Refer to this part as indicated in the ALL-IN-1
                STARTER Installation Guide Part 1 Base Installation.

             Each part is packaged separately. If you are upgrading from
             ALL-IN-1 STARTER Version 1.0, you should put all parts in
             your ALL-IN-1 STARTER Version 1.0 Installation Guide binder.

             Release Notes

             The Release Notes are in two parts:

              o Release Notes Part 1 Language

                This part contains release notes specific to the base
                component and language component that you are going to
                install, and is supplied with the language component of
                your kit.

              o Release Notes Part 2 Market

                This part contains release notes specific to your market
                component, and is supplied with the market component of
                you kit. (Note that this document may not exist for all
                market components.)

             Each part is supplied on a separate piece of media. You
             should print all parts before you start the installation.
             See the ALL-IN-1 STARTER Installation Guide Part 1 Base
             Installation for instructions on printing the Release Notes.

                                                                         3

 






          Software Licensing

             A Service Update Product Authorization Key (PAK) for ALL-IN-1
             STARTER is supplied with ALL-IN-1 STARTER Version 2.4 update
             kits only. If your kit is an update kit, register the Service
             Update PAK supplied with that kit.

             If your ALL-IN-1 STARTER Version 2.4 kit is not an update
             kit, a full PAK is supplied with the kit. Register this PAK.

             You must register and load the appropriate PAK before you
             install ALL-IN-1 STARTER Version 2.4 (see the ALL-IN-1
             STARTER Installation Guide Part 1 Base Installation).

             An additional installation option registers the PAK
             information for the following products (see the ALL-IN-1
             STARTER Installation Guide for details):

              _ VAX FMS Version 2.4

              _ Message Router Version 3.1B

              _ Message Router VMSmail Gateway Version 3.1

              _ CDA Converter Library Version 1.0

          Installation Order

             The following installation order is recommended:

              1 Register the ALL-IN-1 STARTER Version 2.4 license.

              2 Run the ALL-IN-1 STARTER installation procedure, and
                select option 7 to register the licenses for VAX FMS
                Version 2.4, Message Router Version 3.1B, Message Router
                VMSmail Gateway Version 3.1, CDA Converter Library Version
                1.0.

              3 Install VAX FMS Version 2.4, if it is not already
                installed on your system.

          4

 






              4 Install Message Router Version 3.1B (unless it is already
                installed on your system), if you want to send and receive
                messages to and from other systems, or you want to use
                Mail directory addressing, or you want to send mail to
                VMSmail users, either on the local system or on remote
                systems.

             Note If your system is running Message Router Version 3.1 or
                earlier, you must upgrade to Message Router Version 3.1B.

              5 Configure Message Router Version 3.1B, if it is installed
                and not yet configured.

             Note: If you want to install Message Router VMSmail Gateway
                Version 3.1, after you have installed Message Router
                Version 3.1B, you can defer the configuration of Message
                Router and configure both products together at step 7.

              6 Install Message Router VMSmail Gateway Version 3.1 (unless
                it is already installed on your system), if you want to
                send mail to VMSmail users, either on the local system or
                remotely.

              7 Configure Message Router VMSmail Gateway Version 3.1, if
                it is installed and not yet configured.

              8 Install CDA Converter Library Version 1.0 (unless it is
                already installed on your system).

              9 Install CDA Patch kit for VMS Version 5.3. See the section
                headed "Installing the CDA Patch Kit for VMS Version 5.3".

              10 Install ALL-IN-1 STARTER Version 2.4. See the ALL-IN-1
                STARTER Installation Guide Part 1 Base Installation.

              11 Configure the exception reporting routines for ALL-IN-1
                STARTER Version 2.4 Electronic Messaging subsystem.



                                                                         5

 






             See the ALL-IN-1 STARTER Installation Guide Part 1 Base
             Installation for details.

          Note: WPS-PLUS is supplied with ALL-IN-1 STARTER. If you choose
             to integrate WPS-PLUS with ALL-IN-1 STARTER, it becomes the
             default editor in ALL-IN-1 STARTER.

          Additional Release Notes for ALL-IN-1 STARTER Version 2.4

             This section describes additional Release Notes for ALL-IN-1
             STARTER Version 2.4.

             Known Software Problems and Restrictions

             CDA Installation   If you want CDA support with ALL-IN-1
             Version 2.4, you must install both the DECwindows base kit
             and the DECwindows application files before you install CDA.

          CDA Patch Kit for VMS Version 5.3

             The ALL-IN-1 STARTER Version 2.4 kit includes a CDA Patch kit
             for VMS Version 5.3 only. The kit is on the media labeled:

              _ For TK50 kits

                AQ-PCXKA-BE       CDA V1.0 UPDATE TK50

              _ For magnetic tape kits

                BB-PCXLA-BE       CDA V1.0 UPDATE 16MT9

             If you require CDA support from ALL-IN-1 STARTER Version 2.4,
             and you have a VMS Version 5.3 system, install the CDA Patch
             Kit for VMS Version 5.3. Although this patch kit is included
             with ALL-IN-1 STARTER Version 2.4, it is not specific to
             ALL-IN-1 STARTER Version 2.4, and other products can utilize
             the fixes provided with the patch.



          6

 






             The patch kit provides the modified versions of the CDA Base
             Services on VMS Version 5.3 with the following fixes:

              o Mailing a Digital Document Interchange Format (DDIF) file
                with an external reference to a Digital Table Interchange
                Format (DTIF) file no longer causes an access violation.

              o Viewing a DDIF file, produced by DX Version 1.1, with the
                CDA viewer no longer shows the entire document as blank.

             The CDA Patch Kit for VMS Version 5.3 is suppplied as a
             saveset, and is installed using the VMSINSTAL utility (see
             the section headed "Installing the CDA Patch Kit for VMS
             Version 5.3").

             The CDA Patch Kit for VMS Version 5.3 includes the CDA
             Version 1.0 Update Release Notes. These release notes contain
             important information about working with CDA documents in
             ALL-IN-1 STARTER. They also describe CDA features and system
             problems (with workarounds, if available) which have not yet
             been corrected.

             To access the release notes, log in to the privileged VMS
             system manager's account, and do the following:

              1 Enter the following commands:

          $ SET DEFAULT SYS$UPDATE
          $ @VMSINSTAL CDAPAT010 device: OPTIONS N

                where device: is the device on which the distribution
                media is to be mounted.

              2 Enter Y in response to all prompts, until the following
                messages and prompt are displayed:

          %VMSINSTAL-I-RESTORE, Restoring product save set A  . . .

          Release Notes Options:

                                                                         7

 






          1  Display Release Notes
          2  Print Release Notes
          3  Both 1 and 2
          4  Copy release notes to SYS$HELP
          5  Do not display, print, or copy the release notes

          * Select option [3]:

                Press RETURN to display and print the release notes,
                Otherwise, enter the option required.

              3 If you asked to print the release notes, enter the name
                of the printer queue you want to use in response to the
                prompt:

          * Queue name [SYS$PRINT]:

              4 Press RETURN in response to the following prompt, to
                terminate the installation procedure:

          * Do you want to continue the installation [NO]?

             If you attempt to install the patch kit on a system running
             VMS Version 5.2 or earlier, the installation procedure
             displays the following message, and then exits:

          Requires VMS Version 5.3

             If you attempt to install the patch kit on a system that
             already has the patch kit installed, the installation
             procedure displays the following message, and then exits:

          CDA Base Services are already up to date







          8

 






             Additional CDA Release Notes

             CDA support varies depending on the version of VMS you are
             running. For details of CDA support on VMS see the ALL-IN-1
             STARTER Version 2.4 Software Product Description.

          Note: You are never able to see graphics when you read a CDA
             document in ALL-IN-1 STARTER.

             The version of VMS that you are running affects results when
             you read a CDA document, as follows:

              o VMS Version 5.2 or earlier

                If you set the handling of a CDA document to the correct
                CDA handling (DDIF, DTIF, DOTS), you see correctly
                formatted text.

                If you leave the handling of a CDA document blank, the
                text is unformatted.

              o VMS Version 5.3

                If you leave the handling of a CDA document blank, the
                text is formatted, and a line of explanatory text is
                included wherever there are graphics in the file. You
                are unable to see the graphics themselves when you read a
                document.

                If you set the handling of a CDA document to the correct
                CDA handling (DDIF, DTIF, DOTS), the text is formatted,
                but there are only spaces where the graphics are, with no
                explanatory text.

             See the ALL-IN-1 User's Reference for information on how to
             set the handling type on a document.




                                                                         9

 






             Installing the CDA Patch Kit for VMS Version 5.3

             To install the CDA Patch Kit for VMS Version 5.3, do the
             following:

              1 Log in to the privileged VMS system manager's account, and
                enter the following commands:

                  $  SET DEFAULT SYS$UPDATE
                  $  @VMSINSTAL CDAPAT010 device:

                where device: is the device on which the distribution
                media is to be mounted.

              2 The following messages are displayed:

                  VAX/VMS Software Product Installation Procedure V5.3

          It is <dd-mmm-yyyy> at <hh:mm>.
          Enter a question mark (?) at any time for help.

                If any processes are active on your system, the following
                message and prompt are displayed:

          %VMSINSTAL-W-ACTIVE, The following processes are still active:
                  <process_name>

          * Do you want to continue anyway [NO]?

                If you do not want to continue the installation, press
                RETURN. Otherwise, enter Y to continue.

              3 If you are satisfied with the backup of your system disk,
                enter Y in response to the following prompt:

          * Are you satisfied with the backup of your system disk [YES]?)




          10

 






              4 The following messages are displayed:

          The following products will be processed

            CDAPAT V1.0

                  Beginning installation of CDAPAT V1.0 at <hh:mm>

          %VMSINSTAL-I-RESTORE, Restoring product save set A  . . .

              Installing patched versions of CDA Base Services

              5 If you want files to be purged during the installation,
                press RETURN in response to the following prompt:

          * Do you want to purge files replaced by this installation [YES]?

                Otherwise, enter N.

              6 The following messages are displayed:

              To complete the installation on a standalone VAX 11/780
              will take approximately:

                  5 minutes to install

              All required questions have been asked.
              You can terminate the installation procedure at this time.

              7 If you want to continue the installation, press RETURN in
                response to the following prompt:

          * Do you want to continue the installation [YES]?

                Otherwise, enter N to terminate the installation.

              8 The following messages are displayed:

          %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target
              directories  . . .

                  Installation of CDAPAT V1.0 completed at <hh:mm>

                  VMSINSTAL procedure done at <hh:mm>

                                                                        11

 






             First Printing, October 1990

             The information in this document is subject to change without
             notice and should not be construed as a commitment by Digital
             Equipment Corporation. Digital Equipment Corporation assumes
             no responsibility for any errors that may appear in this
             document.

             The software described in this document is furnished under a
             license and may be used or copied only in accordance with the
             terms of such license.

             Digital Equipment Corporation assumes no responsibility for
             the use or reliability of its software on equipment that is
             not supplied by Digital.

             Restricted Rights: Use, duplication, or disclosure by the
             U.S. Government is subject to restrictions as set forth in
             subparagraph (c)(1)(ii) of the Rights in Technical Data and
             Computer Software clause at DFARS 252.227-7013.

             Copyright (c) Digital Equipment Corporation. 1990. All rights
             reserved.

             The following are trademarks of Digital Equipment Corporation:

             ALL-IN-1            VAX FMS
             CDA                 VMS
             DDIF                WPS-PLUS
             DECwindows          +-+-+-+-+-+-+-+TM
             DTIF                |d|i|g|i|t|a|l|
             DX                  +-+-+-+-+-+-+-+








          12
