               C                      PATHWORKS_for_OpenVMS_________________________ @                      Server Installation and Configuration Guide  .                      Order Number: AA-R6G1B-TE    !                      January 1999   E                      This guide explains how to install and configure F                      the components of PATHWORKS for OpenVMS software,D                      including the PATHWORKS Advanced Server and the/                      standalone license server.           G                      Revision/Update Information: This guide supersedes F                                                   the DIGITAL AdvancedD                                                   Server for OpenVMSE                                                   Server Installation C                                                   and Configuration E                                                   Guide, AA-R6G1A-TE.   G                      Operating System:            OpenVMS Alpha Version 5                                                   7.1 E                                                   OpenVMS VAX Version 5                                                   7.1 G                                                   OpenVMS Alpha Version 5                                                   7.2 E                                                   OpenVMS VAX Version 5                                                   7.2   E                      Software Version:            PATHWORKS V6.0B for C                                                   OpenVMS (Advanced 9                                                   Server)         0                      Compaq Computer Corporation#                      Houston, Texas                  H               __________________________________________________________&               First Printing, May 1988#               Revised, January 1999   B               Compaq Computer Corporation makes no representationsB               that the use of its products in the manner describedB               in this publication will not infringe on existing orH               future patent rights, nor do the descriptions contained inF               this publication imply the granting of licenses to make,G               use, or sell equipment or software in accordance with the                description.  F               Possession, use, or copying of the software described inE               this publication is authorized only pursuant to a valid G               written license from Compaq or an authorized sublicensor.   E               Compaq conducts its business in a manner that conserves G               the environment and protects the safety and health of its 2               employees, customers, and community.  B                Compaq Computer Corporation 1998, 1999. All rights               reserved.   I               The following are trademarks of Compaq Computer Corporation   G               Alpha, Compaq, DECdirect, DECnet-Plus, DECprint, DIGITAL, E               OpenVMS, PATHWORKS, VAX, VAX DOCUMENT, VAXcluster, VMS, "               and the Compaq logo.  7               The following are third-party trademarks:   F               AT&T is a registered trademark of American Telephone and                Telegraph Company.E               Apple, AppleShare, LaserWriter, Macintosh, and TRUETYPE ?               are registered trademarks of Apple Computer, Inc. ;               DEC Rdb is a trademark of Oracle Corporation. C               Hewlett-Packard, HP, LaserJet, and PCL are registered 4               trademarks of Hewlett-Packard Company.E               IBM and OS/2 are registered trademarks of International ,               Business Machines Corporation.G               Microsoft, MS-DOS, and Windows are registered trademarks, G               and Windows 95, Windows 98, and Windows NT are trademarks '               of Microsoft Corporation. G               MultiNet and TCPWARE are registered trademarks of Process #               Software Corporation. D               NetBIOS is a trademark of Micro Computer Systems, Inc.E               Novell and NetWare are registered trademarks of Novell,                Inc.C               PostScript is a registered trademark of Adobe Systems                Incorporated.   D               All other trademarks and registered trademarks are the3               property of their respective holders.   H                                                                   ZK6555  G               The PATHWORKS for OpenVMS (Advanced Server) documentation )               set is available on CD-ROM.                                E      ________________________________________________________________   E                                                              Contents     E      Preface..................................................     ix     4      1  Before You Install PATHWORKS Advanced Server  <          1.1  About the Advanced Server for OpenVMS SoftwareE               Kit.............................................    1-1 9          1.1.1  About the PATHWORKS for OpenVMS (NetWare) E                 Server........................................    1-2 8          1.2  If You Are Upgrading from PATHWORKS V5 forE               OpenVMS (LAN Manager)...........................    1-2 E          1.3  Installing DECprint Software....................    1-2 E          1.4  About Licensing.................................    1-3 E          1.4.1  License Requirements .........................    1-3 E          1.4.2  About the License Server .....................    1-4 E          1.5  About External Authentication...................    1-5 E          1.6  Reading the Release Notes.......................    1-6 E          1.6.1  How to Access the Release Notes ..............    1-6 E          1.7  Using the Installation Checklist................    1-7 <          1.8  Requirements for Installing PATHWORKS AdvancedE               Server Software.................................    1-7 E          1.8.1  Hardware Requirements ........................    1-7 E          1.8.2  Software Requirements ........................    1-8 E          1.8.3  Client Software ..............................    1-8 E          1.8.4  Memory Requirements ..........................    1-8 E          1.9  Pre-installation Tasks..........................    1-8 E          1.9.1  Step 1: Check the Part Listing ...............   1-10 E          1.9.2  Step 2: Check the Network Hardware ...........   1-10 E          1.9.3  Step 3: Check the Required Software ..........   1-10 E          1.9.4  Step 4: Log In to the SYSTEM Account .........   1-10 E          1.9.5  Step 5: Back Up the System ...................   1-11 E          1.9.6  Step 6: Print and Read the Release Notes .....   1-11 E          1.9.7  Step 7: Check Disk Space Requirements ........   1-11   E                                                                   iii                  H            1.9.8   Step 8: Check System Parameters ..............   1-12H            1.9.9   Step 9: Check the Queue Manager ..............   1-16H            1.9.10  Step 10: Check Time Zone and TDF .............   1-16H            1.9.11  Step 11: Check DECnet Status .................   1-17H            1.9.11.1  Checking DECnet (Phase IV) Status..........    1-17H            1.9.11.2  Checking DECnet-Plus Status................    1-17H            1.9.12  Step 12: Check TCP/IP Status .................   1-181            1.9.13  Step 13: Check OpenVMS Cluster H                    Configuration.................................   1-19H            1.10 Next Step.......................................    1-20    3         2  Installing the PATHWORKS Advanced Server   H            2.1  About the Installation Procedure................     2-1H            2.1.1   What is VMSINSTAL? ...........................    2-1H            2.1.2   PATHWORKS Advanced Server Installation Kit ...    2-2H            2.1.3   What VMSINSTAL Does ..........................    2-2H            2.2  Installing the Server...........................     2-2H            2.2.1   Before You Start VMSINSTAL ...................    2-3H            2.2.2   How to Start VMSINSTAL .......................    2-5H            2.2.3   How to Respond to Prompts ....................    2-6H            2.2.4   How to Interrupt the Installation ............    2-7H            2.2.5   How to Answer Installation Questions .........    2-7H            2.3  Troubleshooting Installation Problems...........    2-18@            2.3.1   Installing the PATHWORKS Advanced Server on aH                    System with the NetWare Server................   2-18<            2.3.2   Installing PATHWORKS Advanced Server on a<                    System with PATHWORKS V5 for OpenVMS (LANH                    Manager)......................................   2-19@            2.3.3   Installing the Standalone License Server on aA                    System Where the PATHWORKS Advanced Server Has H                    Been Installed................................   2-199            2.3.4   Installing the External Authentication H                    Software......................................   2-20H            2.4  Next Steps......................................    2-20                  
         iv                 4         3  Configuring the PATHWORKS Advanced Server  3            3.1  About the PATHWORKS Advanced Server H                 Configuration Procedure.........................     3-1H            3.1.1   What Is the Configuration Procedure? .........    3-2H            3.1.2   What the Configuration Procedure Does ........    3-2>            3.2  Before You Start the PATHWORKS Advanced ServerH                 Configuration Procedure.........................     3-3:            3.3  How to Start the PATHWORKS Advanced ServerH                 Configuration Procedure.........................     3-8;            3.4  How to Respond to PATHWORKS Advanced Server H                 Configuration Prompts...........................     3-8H            3.5  How to Change Default Configuration Settings....    3-137            3.6  Troubleshooting Configuration Procedure H                 Problems........................................    3-15;            3.6.1   Ensuring Sufficient Resources to Support H                    Clients.......................................   3-15?            3.7  Selecting the PATHWORKS Advanced Server Network H                 Device..........................................    3-16H            3.8  Defining Communications Devices.................    3-17H            3.9  Next Steps......................................    3-19  A         4  Configuring and Starting the Standalone License Server   H            4.1  About the License Server........................     4-1<            4.2  Before You Begin to Configure the StandaloneH                 License Server..................................     4-2H            4.3  Configuring the Standalone License Server.......     4-3H            4.4  Configuring the Transports......................     4-4H            4.5  How to Respond to Configuration Prompts.........     4-4H            4.6  How to Start the Standalone License Server......     4-6H            4.6.1   How to Start the License Server Manually .....    4-72            4.6.2   How to Start the License ServerH                    Automatically.................................    4-7@            4.6.3   How to Start the License Server in an OpenVMSH                    Cluster.......................................    4-7                  H                                                                        v                 :         5  After You Install the PATHWORKS Advanced Server  H            5.1  Before You Begin Post-installation Tasks........     5-1=            5.2  Verifying the PATHWORKS for OpenVMS (Advanced H                 Server) Installation............................     5-3H            5.3  Starting the PATHWORKS Advanced Server..........     5-3H            5.3.1   When to Start the PATHWORKS Advanced Server ..    5-4H            5.3.2   What the Startup Procedure Does ..............    5-4H            5.3.3   Troubleshooting the Startup ..................    5-4H            5.3.4   Starting the File Server .....................    5-5=            5.3.5   How to Start the PATHWORKS Advanced Server H                    Manually......................................    5-5:            5.3.6   How to Define PATHWORKS Advanced ServerH                    Commands When You Log In......................    5-5=            5.3.7   How to Start the PATHWORKS Advanced Server H                    Automatically.................................    5-6@            5.3.8   How to Start the PATHWORKS Advanced Server inH                    an OpenVMS Cluster............................    5-6H            5.4  Stopping the PATHWORKS Advanced Server..........     5-7H            5.4.1   When to Stop the PATHWORKS Advanced Server ...    5-7H            5.4.2   How to Stop the PATHWORKS Advanced Server ....    5-7?            5.4.3   How to Stop the PATHWORKS Advanced Server on H                    System Shutdown...............................    5-7H            5.5  Setting Up External Authentication..............     5-8@            5.5.1   Setting Up External Authentication in OpenVMSH                    Clusters......................................    5-9:            5.5.2   Enabling External Authentication over aH                    Network.......................................   5-10>            5.5.3   Configuring Externally Authenticated ClientH                    Connections...................................   5-119            5.6  Installing Optional Server Administration H                 Tools...........................................    5-11  +         6  Implementing a Wide Area Network   H            6.1  Enabling Wide Area Networking...................     6-14            6.2  Using the LMHOSTS File for Wide AreaH                 Networking......................................     6-2H            6.2.1   Setting up a TCP/IP Wide Area Network ........    6-2H            6.2.2   Enabling LMHOSTS Name Resolution .............    6-2H            6.2.3   The LMHOSTS Directory ........................    6-3H            6.2.4   LMHOSTS File Syntax ..........................    6-3H            6.2.5   Managing the LMHOSTS File ....................    6-4    
         vi                 H            6.2.6   Using the LMHOSTS Log File ...................    6-5H            6.3  Using WINS in a Wide Area Network...............     6-56            6.3.1   Setting up WINS Support for OpenVMSH                    Clusters......................................    6-5    6         7  Removing PATHWORKS Advanced Server Software  H            7.1  Removing the PATHWORKS Advanced Server..........     7-16            7.1.1   About the PATHWORKS Advanced ServerH                    Deinstallation Command Procedure..............    7-26            7.1.2   Using the PATHWORKS Advanced ServerH                    Deinstallation Procedure......................    7-2;            7.1.3   Sample PATHWORKS Advanced Server Removal H                    Procedure.....................................    7-3H            7.2  Removing the PATHWORKS NetWare Server...........     7-4H            7.2.1   Sample NetWare Server Removal Procedure ......    7-5  -         A  Installation and Upgrade Checklist   <         B  Sample PATHWORKS Advanced Server Installation and"            Configuration Procedure  =            B.1  Sample PATHWORKS Advanced Server Installation H                 Procedure.......................................     B-1>            B.2  Sample PATHWORKS Advanced Server ConfigurationH                 Procedure.......................................     B-5  <         C  Sample Standalone License Server Installation and"            Configuration Procedure  =            C.1  Sample Standalone License Server Installation H                 Procedure.......................................     C-1>            C.2  Sample Standalone License Server ConfigurationH                 Procedure.......................................     C-3                    H                                                                      vii                 '         D  Upgrade Utility Installation   H            D.1  Installing the Upgrade Utility..................     D-1H            D.2  Sample Upgrade Utility Installation Procedure...     D-2  @         E  Sample External Authentication Installation Procedure  7            E.1  Sample External Authentication SoftwarenH                 Installation Procedure..........................     E-1  @         F  PATHWORKS Advanced Server Files and On-Disk Structure  H            F.1  PATHWORKS Advanced Server Files.................     F-1H            F.2  PATHWORKS Advanced Server On-Disk Structure.....    F-13  2         G  PATHWORKS Advanced Server Logical Names    
         Index              Figures   >            F-1     PATHWORKS Advanced Server On-Disk StructureH                    Diagram.......................................   F-14           Tables  H            1-1     Pre-installation Checklist ...................    1-9  H            1-2     GBLPAGES Parameter Minimum Value .............   1-12  H            1-3     GBLSECTIONS Parameter Minimum Value ..........   1-13  H            1-4     PROCSECTCNT Parameter Minimum Value ..........   1-14  H            2-1     Installation Questions .......................    2-7  :            3-1     PATHWORKS Advanced Server ConfigurationH                    Prompts.......................................    3-9  H            3-2     Configuration Settings .......................   3-14  H            3-3     OpenVMS Network Device Logicals ..............   3-16  H            3-4     Undefined Device Messages ....................   3-18  :            4-1     Standalone License Server ConfigurationH                    Prompts.......................................    4-5  H            5-1     Have You Done . . . ...........................   5-2  H            7-1     PWRK$DEINSTAL Prompts ........................    7-3           viii                 H            7-2     PWVN$DEINSTAL Prompts ........................    7-5  H            A-1     Installation and Upgrade Checklist ...........    A-1  =            F-1     Files Installed for the PATHWORKS AdvancedeH                    Server........................................    F-1  H            G-1     PATHWORKS Advanced Server Logical Names ......    G-1                                                                          H                                                                       ix                           H         ________________________________________________________________  H                                                                  Preface      B               This guide explains how to install and configure the*               following PATHWORKS servers:  D               o  PATHWORKS for OpenVMS (Advanced Server) file server  4               o  PATHWORKS standalone license server  %               o  Upgrade utility only,  6               o  External Authentication software only           Intended Audience   F               This guide is written for the network server administra-G               tor. The administrator is assumed to be familiar with thee@               following aspects of the OpenVMS operating system:  /               o  Digital Command Language (DCL)d  2               o  A text editor, such as EDT or EVE  ,               o  VMSINSTAL command procedure  H               This guide also assumes that the administrator is familiarE               with the networking concepts for the PATHWORKS Advanced2               Server.r           Document Structure  F               The following list can help you find information in this               guide:      H                                                                       ix a             H               __________________________________________________________H               Chapter_____Description___________________________________  F               Chapter 1   Describes prerequisites for the installation$                           procedure.  ?               Chapter 2   Describes the installation procedure.c  G               Chapter 3   Describes the configuration procedure for thed4                           PATHWORKS Advanced Server.  G               Chapter 4   Describes the configuration procedure for the 4                           standalone license server.  A               Chapter 5   Describes post-installation tasks, suchnB                           as running the Installation VerificationG                           Procedure and starting the server independent_?                           of the installation and configuration %                           procedures.t  E               Chapter 6   Describes how to set up Wide Area Networks.   H               Chapter 7   Describes how to remove the PATHWORKS Advanced2                           Server from your system.  B               Appendix A  Provides a checklist of installation and@                           configuration tasks. You can photocopy>                           Appendix A, Installation and UpgradeE                           Checklist, and use it as a checklist as you *                           read this guide.  G               Appendix B  Shows a sample installation and configuration.F                           procedure for the PATHWORKS Advanced Server.  G               Appendix C  Shows a sample installation and configuration.F                           procedure for the standalone license server.  G               Appendix D  Shows a sample installation procedure for the *                           Upgrade utility.  C               Appendix E  Shows a sample installation procedure fore?                           external authentication software onlya  A               Appendix F  Lists the files that are installed withrE                           PATHWORKS Advanced Server and shows the on-.)                           disk structure.8  A               Appendix G  Lists the logical names created for the1H               ____________PATHWORKS_Advanced_Server.____________________  	         xf r  .                     Related Documents   B               The following manuals provide more information about-               topics discussed in this guide:.  H               __________________________________________________________H               Document______________Description_________________________  G               PATHWORKS for         Explains how to upgrade a PATHWORKS.@               OpenVMS (Advanced     V5 for OpenVMS (LAN Manager)F               Server) Server        server to PATHWORKS V6 for OpenVMS6               Migration Guide       (Advanced Server).  ?               Advanced Server for   Provides an overview of andiA               OpenVMS Concepts and  introduction to the PATHWORKS @               Planning Guide        Advanced Server software andF                                     associated networking concepts forH                                     system administrators and operators.  H               PATHWORKS for         Explains how to manage and customizeA               OpenVMS (Advanced     the PATHWORKS Advanced Server -               Server) Server        software.s               Administrator's                GuideC  H               Advanced Server for   Provides command syntax descriptionsG               OpenVMS Commands      for all ADMINISTER commands and NET 8               Reference Manual      command equivalents.  @               Advanced Server for   Describes the license serverH               OpenVMS Guide to      software and how to manage PATHWORKSA               Managing Advanced     for OpenVMS (Advanced Server)lH               Server_Licenses_______licenses.___________________________  B               The following table lists related OpenVMS documents.                    H                                                                       xi .  .          H               __________________________________________________________H               OpenVMS_Document___________Description____________________  E               OpenVMS Alpha V7.1         Describes how to install the B               Upgrade and Installation   OpenVMS Alpha V7.1 system2               Manual                     software.  E               OpenVMS Alpha V7.2         Describes how to install theaB               Upgrade and Installation   OpenVMS Alpha V7.2 system2               Manual                     software.  A               OpenVMS VAX V7.1 Upgrade   Describes how to install D               and Installation Manual    the OpenVMS VAX V7.1 system2                                          software.  A               OpenVMS VAX V7.2 Upgrade   Describes how to install D               and Installation Manual    the OpenVMS VAX V7.2 system2                                          software.  A               OpenVMS System Manager's   A task-oriented guide toeD               Manual                     managing an OpenVMS system.  A               OpenVMS System Management  A reference guide to the D               Utilities Reference        utilities and tools used inD               Manual                     managing an OpenVMS system.  H               OpenVMS License            Explains how to load and manageF               Management Utility Manual  license Product Authorization4                                          Keys (PAKs)  F               OpenVMS V7.1 New Features  Describes the new features ofG               Manual                     OpenVMS Version 7.1, includingf@                                          procedures for enablingA                                          external authentication.o  F               OpenVMS V7.2 Guide to      Describes the system securityD               System Security            features of OpenVMS VersionB                                          7.2, including procedures>                                          for enabling externalH               ___________________________authentication.________________           Reader's Comments.  ;               Compaq welcomes your comments on this manual.r  @               Print or edit the online form SYS$HELP:OPENVMSDOC_8               COMMENTS.TXT and send us your comments by:  4               Internet    openvmsdoc@zko.mts.dec.com           xii. .                 F               Fax         603-884-0120, Attention: OSSG Documentation,$                           ZKO3-4/U08  5               Mail        Compaq Computer Corporationa>                           OSSG Documentation Group, ZKO3-4/U08,                           110 Spit Brook Rd./                           Nashua, NH 03062-2698n  -         How To Order Additional Documentationh  ?               Use the following World Wide Web address to ordere'               additional documentation:e  0               http://www.openvms.digital.com:81/  F               If you need help deciding which documentation best meets:               your needs, call 800-DIGITAL (800-344-4825).           Conventions.  A               The following conventions are used in the PATHWORKS.0               Advanced Server documentation set.  H               __________________________________________________________H               Convention____Meaning_____________________________________  ?               "PATHWORKS    Refers to the PATHWORKS for OpenVMS.D               Advanced      (Advanced Server) file and print server.               Server"   G               DECnet        Applies to both DECnet Phase IV and DECnet- =                             Plus, unless otherwise specified.   C               <Ctrl/x>      While you hold down the Ctrl key, presstD                             another key or a pointing device button.  E               <Return>      Indicates a place to press the Return (orK'                             Enter) key.   D               Italic        Indicates a place holder for informationD                             or parameters that you must provide. ForF                             example, if the procedure asks you to typeG                             file name, you must type the actual name of #                             a file.p  C                             Italic also indicates new terms and the E                             titles of other documentation referenced.O  H                                                                     xiii .  .          H               __________________________________________________________H               Convention____Meaning_____________________________________  D               monospace     Indicates the actual commands, words, orG                             characters that you type in a dialog box orHA                             at a command prompt or system output.   G               Note:         Provides information of special importance.g  B               Caution:      Provides information to avoid damaging1                             software or hardware.7  E               Warning:      Provides information that is essential to7,                             people's safety.  C               /             A forward slash in command descriptions.G                             indicates that a command qualifier follows.n  G                . . .        A horizontal ellipsis following an entry inoH                             a command line indicates that the entry or aD                             similar entry can be repeated any numberB                             of times. An ellipsis following a fileF                             name indicates that additional parameters,B                             values, or information can be entered.  G               .             A vertical ellipsis in an example indicates ;               .             that not all the data is shown.-H               ._________________________________________________________                                             xiv6                       H                                                                        1H         ________________________________________________________________  H                             Before You Install PATHWORKS Advanced Server      G               This chapter describes the hardware and software you must.H               have and the tasks you need to complete before you install1               PATHWORKS Advanced Server software.   >               This chapter consists of the following sections:  C               o  Section 1.1, About the Advanced Server for OpenVMS.                  Software Kit3  H               o  Section 1.2, If You Are Upgrading from PATHWORKS V5 for&                  OpenVMS (LAN Manager)  :               o  Section 1.3, Installing DECprint Software  -               o  Section 1.4, About Licensinga  ;               o  Section 1.5, About External AuthenticationA  7               o  Section 1.6, Reading the Release Notest  >               o  Section 1.7, Using the Installation Checklist  C               o  Section 1.8, Requirements for Installing PATHWORKSW)                  Advanced Server Softwarei  4               o  Section 1.9, Pre-installation Tasks  (               o  Section 1.10, Next Step  >         1.1 About the Advanced Server for OpenVMS Software Kit  F               The PATHWORKS for OpenVMS (Advanced Server) kit contains?               the software required to run the following serverm               software:7  6               o  PATHWORKS Advanced Server file server  4               o  PATHWORKS standalone license server  H                         Before You Install PATHWORKS Advanced Server 1-1 n         4         Before You Install PATHWORKS Advanced Server>         1.1 About the Advanced Server for OpenVMS Software Kit  C               In addition, the kit includes an Upgrade utility that.E               helps you to migrate from PATHWORKS V5 for OpenVMS (LANcE               Manager) to PATHWORKS V6 for OpenVMS (Advanced Server). >               The Upgrade utility may be installed separately.  H               The installation procedure also allows you to install only/               External Authentication software.u  >         1.1.1 About the PATHWORKS for OpenVMS (NetWare) Server  E               The PATHWORKS for OpenVMS (NetWare) server is no longer G               supported. PATHWORKS for OpenVMS (Advanced Server) cannoteF               be installed on a system where the PATHWORKS for OpenVMS@               (NetWare) server is installed. If the installationA               procedure finds the PATHWORKS for OpenVMS (NetWare)tE               server, it optionally invokes the PATHWORKS for OpenVMSuH               (NetWare) removal procedure (PWVN$DEINSTAL), to remove theE               NetWare server software before installing the PATHWORKSdF               Advanced Server software. For more information about theE               NetWare server removal procedure, refer to Section 7.2,s4               Removing the PATHWORKS NetWare Server.  D               If your clients continue to depend on NetWare softwareB               to connect to the system, or if you need the IPX/SPXH               transport for any reason, you should designate a system to=               run the PATHWORKS for OpenVMS (NetWare) server..  C         1.2 If You Are Upgrading from PATHWORKS V5 for OpenVMS (LAN              Manager)  @               If you have PATHWORKS V5 for OpenVMS (LAN Manager)D               installed, you must install the new PATHWORKS AdvancedH               Server. You can choose to install just the Upgrade utilityB               initially, and install the PATHWORKS Advanced ServerD               later. See the PATHWORKS for OpenVMS (Advanced Server):               Server Migration Guide for more information.  (         1.3 Installing DECprint Software  B               DECprint Supervisor for OpenVMS is a printing systemF               that provides queue management and printing features for"               PostScript printers.      8         1-2 Before You Install PATHWORKS Advanced Server .  .      H                             Before You Install PATHWORKS Advanced ServerH                                         1.3 Installing DECprint Software  C               If you plan to use DECprint Supervisor for OpenVMS on A               your system, Compaq Computer Corporation recommends F               that you install it before installing PATHWORKS AdvancedE               Server. You must reboot the system after installing the F               DECprint software. You can perform the reboot as part ofF               the DECprint Supervisor installation procedure, or afterF               you install PATHWORKS Advanced Server. However, DECprintH               Supervisor software must be installed before you configure2               and start PATHWORKS Advanced Server.           1.4 About Licensing_  C               The following sections describe the way the PATHWORKS E               Advanced Server software is licensed, and how to ensure A               clients accessing the server are properly licensed.v  "         1.4.1 License Requirements  A               The PATHWORKS Advanced Server requires that clientss@               accessing file and print services be appropriatelyB               licensed. To conform to this requirement, one of the%               following must be true:h  E               o  The client must have acquired a client-based license.B                  before connecting to a PATHWORKS Advanced Server.  G               o  The PATHWORKS Advanced Server must have a server-basedgD                  license available to assign to an unlicensed clientE                  attempting to use services of the PATHWORKS Advanced                   Server.  F               In either case, the license required to access PATHWORKSE               Advanced Server services is the PATHWORKS Client-Access &               license: PWLMXXXCA06.00.  D               If you are upgrading from PATHWORKS LAN Manager, referC               to the PATHWORKS for OpenVMS (Advanced Server) Server D               Migration Guide for information about upgrading client               license requests._            H                         Before You Install PATHWORKS Advanced Server 1-3    h      4         Before You Install PATHWORKS Advanced Server         1.4 About Licensingr  &         1.4.2 About the License Server  E               The PATHWORKS license server is a software program thatoE               you can run on your OpenVMS system to grant licenses toa               clients.  2               The license server can be installed:  G               o  With the file server (automatically included with your *                  file server installation)  H               o  Separately from the file server (called the "standalone!                  license server")r  B               In either case, you can configure the license serverC               to support clients using any of the following networkr               protocols:                 o  DECnet   &               o  LAN Manager (NetBEUI)                 o  TCP/IP   E               Compaq Computer Corporation recommends that you installoG               the license server on a designated OpenVMS system withoutlE               the PATHWORKS file server. Therefore, the PATHWORKS foroB               OpenVMS (Advanced Server) software kit allows you toC               install the standalone license server separately fromoE               the file server. Alternatively, you can run the licensexG               server on an OpenVMS cluster with PATHWORKS file servers, :               where cluster failover provides reliability.  F               Each LAN needs only one active PATHWORKS license server.A               (The same license server can support both PATHWORKS E               LAN Manager and PATHWORKS Advanced Server clients.) The F               license product authorization keys (PAKs) must be loadedC               on the system that runs the PATHWORKS license server.   C               In an OpenVMS cluster, the PAKs must be loaded into at&               shared license database.        8         1-4 Before You Install PATHWORKS Advanced Server           H                             Before You Install PATHWORKS Advanced ServerH                                                      1.4 About Licensing  H               __________________________________________________________"               For more informationH               about_._._.___________Refer_to_._._.______________________  F               Loading licenses      OpenVMS License Management Utility*                                     Manual  H               Managing PATHWORKS    Advanced Server for OpenVMS Guide toE               Advanced Server       Managing Advanced Server LicensespH               licenses__________________________________________________  )         1.5 About External AuthenticationS  G               External authentication is an optional feature of OpenVMSd@               systems that allows system managers to set up userC               accounts for which login authentication is based on an=               security mechanism other than OpenVMS security.   >               The PATHWORKS Advanced Server takes advantage of>               this feature by providing the ability to use theE               PATHWORKS Advanced Server or Windows NT-compatible useriD               authentication mechanisms to authenticate OpenVMS userF               logins. This allows users to log in at the OpenVMS loginF               prompt using the PATHWORKS Advanced Server user name andC               password. In addition, it provides automatic password 0               synchronization for user accounts.  C               When you install PATHWORKS Advanced Server, the filesdG               required to support external authentication are automati-o9               cally included in the installation process.a  @               If you want to enable external authentication on aC               different node in an OpenVMS cluster), you may choose C               to install the External Authentication software only.   B               For more information about enabling external authen-A               tication, refer to Section 5.5, Setting Up External_               Authentication._              H                         Before You Install PATHWORKS Advanced Server 1-5    p      4         Before You Install PATHWORKS Advanced Server%         1.6 Reading the Release Notese  %         1.6 Reading the Release Notesu  E               The PATHWORKS Advanced Server installation kit includes H               the PATHWORKS for OpenVMS (Advanced Server) Release Notes.  G               Compaq Computer Corporation recommends that you print andrD               read the appropriate release notes before starting the               installation.a  F                 ________________________Note  ________________________  C                 The installation procedure copies the release notesbA                 into the SYS$HELP: area, where they are availablee*                 after server installation.  E                 _____________________________________________________A  -         1.6.1 How to Access the Release Notes   H               Use the following table to decide how to print the release               notes:  H         ________________________________________________________________         If you want H         to_._._.______Then_._._.________________________________________  '         Print the     Do the following:o>         release       1. Load the installation kit on a drive.
         notesoG         before the    2. Enter the following commands, replacing device G         installation     with the name of the device (and if the device G                          is a disk, also designate the directory) where 9                          you loaded the installation kit:            $ MOUNT device: PWRKQ         $ BACKUP/SELECT=PWRKV60B060.RELEASE_NOTES device:PWRKV60B060.A/SAVE_SET *s  )         $ PRINT PWRKV60B060.RELEASE_NOTESc              8         1-6 Before You Install PATHWORKS Advanced Server           H                             Before You Install PATHWORKS Advanced ServerH                                            1.6 Reading the Release Notes  H         ________________________________________________________________         If you wanttH         to_._._.______Then_._._.________________________________________  '         Print the     Do the following: >         release       1. Load the installation kit on a drive.
         notes A         during the    2. Enter the following command to start the80         installation     installation procedure:  E                       $ @VMSINSTAL PWRKV60B060 device_name: OPTIONS No  F                       The installation procedure prompts you to either@                       print or display the release notes. In anyF                       case, the release notes are always copied to theH         ______________SYS$HELP:_area.___________________________________  ,         1.7 Using the Installation Checklist  F               Appendix A, Installation and Upgrade Checklist, providesF               an installation and configuration summary checklist. YouE               can photocopy the summary checklist and use it to track H               the completion of the installation and configuration tasks&               described in this guide.  A         1.8 Requirements for Installing PATHWORKS Advanced Server_             Software  G               The following sections describe the hardware and softwareWG               that may be required to install PATHWORKS Advanced Server                on the system.  #         1.8.1 Hardware Requirements   @               Make sure that the network (including cables, PCs,C               servers, and other hardware) is connected. For a list D               of the hardware that the server supports, refer to the1               Software Product Description (SPD).n              H                         Before You Install PATHWORKS Advanced Server 1-7           4         Before You Install PATHWORKS Advanced ServerJ         1.8 Requirements for Installing PATHWORKS Advanced Server Software  #         1.8.2 Software RequirementsF  D               To install PATHWORKS Advanced Server successfully, youE               must have the following software properly installed ande(               configured on your system:  %               o  OpenVMS V7.1 or V7.2s  1               o  DECnet or DECnet-Plus (optional)   G                  DECnet can be installed automatically with the OpenVMS "                  operating system.  "               o  TCP/IP (optional)  F                  TCP/IP Services for OpenVMS and a selection of third-H                  party TCP/IP products on OpenVMS can be used to provide                   TCP/IP support.           1.8.3 Client Software   E               PATHWORKS Advanced Server supports connections from the )               following types of clients:p                 o  Windows NT                  o  Windows 95f                 o  Windows 98g  '               o  Windows for Workgroupsf  .               o  PATHWORKS for DOS and Windows  )               o  PATHWORKS for Windows 95                  o  PATHWORKS 32n  !         1.8.4 Memory Requirements   G               The system must have at least 64 MB of physical memory tos0               run the PATHWORKS Advanced Server.  "         1.9 Pre-installation Tasks  ?               Use the following checklist to make sure you haveoC               completed all the tasks you should perform before youcH               install the software. Each task is described later in this               section.  8         1-8 Before You Install PATHWORKS Advanced Server e         H                             Before You Install PATHWORKS Advanced ServerH                                               1.9 Pre-installation Tasks  H               Table_1-1_Pre-installation_Checklist______________________  /               <   >1.   Check the part listing.   H               <   >2.   Make sure that the network hardware is installed&                         and connected.  ?               <   >3.   Make sure that the required software is "                         installed.  5               <   >4.   Log in to the SYSTEM account._  1               <   >5.   Back up the system disks.u  /               <   >6.   Read the release notes.   G               <   >7.   Make sure that you have adequate disk space for %                         installation.t  0               <   >8.   Check system parameters.  0               <   >9.   Check the queue manager.  :               <   >10.  Check the time zone configuration.  D               <   >11.  Make sure that DECnet is running, if you are=                         planning to use the DECnet transport.   D               <   >12.  Make sure that TCP/IP is running, if you are=                         planning to use the TCP/IP transport.   G               <   >13.  Check the OpenVMS cluster configuration, if youeE                         are installing PATHWORKS Advanced Server on asH               __________cluster.________________________________________                      H                         Before You Install PATHWORKS Advanced Server 1-9    v      4         Before You Install PATHWORKS Advanced Server"         1.9 Pre-installation Tasks  C               Before you install PATHWORKS Advanced Server, performo               these tasks:  ,         1.9.1 Step 1: Check the Part Listing  A               The software part listing specifies the contents ofrA               the kit you receive. Check the contents of your kiteD               against that information. If parts are missing or yourF               kit is damaged, contact your Compaq Computer Corporation               representative.   0         1.9.2 Step 2: Check the Network Hardware  D               PATHWORKS Advanced Server runs on OpenVMS systems thatG               meet the software requirements. The PC local area network                (LAN) requires:O  G               o  A supported network controller board in the server andS                  in each client   A               o  The cables to connect each client to the networkh  1         1.9.3 Step 3: Check the Required Softwaren  ?               PATHWORKS Advanced Server requires the following:.  F               o  OpenVMS operating system, Version 7.1 or Version 7.2.  C               o  DECnet or DECnet-Plus, if you are going to use therB                  DECnet transport, the mail server, or the license$                  server over DECnet.  E               o  A TCP/IP product, if you are going to use the TCP/IPnF                  transport. Supported TCP/IP products are described inD                  the PATHWORKS for OpenVMS (Advanced Server) Release                  Notes.N  2         1.9.4 Step 4: Log In to the SYSTEM Account  E               Before you install PATHWORKS Advanced Server, log in todH               the SYSTEM account, which has sufficient privileges to run)               the installation procedure.u  .               To log in to the SYSTEM account:  7               1. At the Username: prompt, enter SYSTEM:e  !                  Username: SYSTEMt  9         1-10 Before You Install PATHWORKS Advanced Servert I  S      H                             Before You Install PATHWORKS Advanced ServerH                                               1.9 Pre-installation Tasks  ?               2. At the Password: prompt, enter the password to B                  the SYSTEM account. The password you enter is not                  displayed.n  (         1.9.5 Step 5: Back Up the System  D               To safeguard against the loss of valuable data, CompaqH               Computer Corporation recommends that you back up all disksD               on your system before you install any layered product.  D               To do a system backup, use the OpenVMS BACKUP command.G               For information about the BACKUP command, see the OpenVMS ;               System Management Utilities Reference Manual.   6         1.9.6 Step 6: Print and Read the Release Notes  H               If you have not already read the release notes, you shouldD               do so before installing the software. See Section 1.6,>               Reading the Release Notes, for more information.  3         1.9.7 Step 7: Check Disk Space Requirementsf  B               On your OpenVMS system, the following amount of freeB               disk space on the system disk is required during the%               installation procedure.H  H         ________________________________________________________________+                               You need thisYE                               number of blocks   You need this numberiC         To install these      on an Alpha        of blocks on a VAXOH         components_._._.______system_._._._______system_._._.___________  ;         PATHWORKS Advanced    144,500[1]         125,000[1]          Server  8         Standalone license    144,500            125,000         server  8         Upgrade utility only   30,000             25,500  8         External authen-      144,500            125,000         tication imagesh         onlyH         [1]The_disk_space_requirements_shown_include_provision_for_the__  H         integrated_license_server.______________________________________  D               To check the number of free blocks on the system disk,               enter:  H                        Before You Install PATHWORKS Advanced Server 1-11 e  i      4         Before You Install PATHWORKS Advanced Server"         1.9 Pre-installation Tasks  )               $ SHOW DEVICE SYS$SYSDEVICET                 Result  F               The OpenVMS system displays information about the systemE               disk, including the number of free blocks. For example:e  F               Device     Device     Error    Volume    Free  Trans MntF                Name      Status     Count     Label   Blocks Count CntF               DUA0:      Mounted        0  AXPVMSSYS 1724856   280   1  -         1.9.8 Step 8: Check System Parametersi  H               Make sure that the following OpenVMS system parameters are               set properly.   F                 ________________________Note  ________________________  =                 If these parameters are not set properly, you B                 cannot configure the server after you complete the'                 installation procedure.e  E                 _____________________________________________________                   GBLPAGES parameter  >               The minimum value of this parameter is listed in:               Table 1-2, GBLPAGES Parameter Minimum Value.  H               Table_1-2_GBLPAGES_Parameter_Minimum_Value________________                 For a VAX system,aG               the value must be at       For an Alpha system, the valueoH               least_._._.________________must_be_at_least_._._._________  H               3500_pages_________________7500_pages_____________________  F               To ensure that your system has enough free global pages:  %               1. Enter the following:   =                  $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLPAGES")N  F                  The value of the GBLPAGES parameter is displayed. For                  example:s                    7500   9         1-12 Before You Install PATHWORKS Advanced Serverh l         H                             Before You Install PATHWORKS Advanced ServerH                                               1.9 Pre-installation Tasks  B               2. If the value is less than required, edit the fileC                  SYS$SYSTEM:MODPARAMS.DAT and add a line similar to                   the following:   $                  ADD_GBLPAGES = 7500  #               GBLSECTIONS parameterl  C               The minimum value of this parameter differs dependingsA               on which server is to be installed, as described inH=               Table 1-3, GBLSECTIONS Parameter Minimum Value.   H               Table_1-3_GBLSECTIONS_Parameter_Minimum_Value_____________                  For the standaloneB               license server only,       If the PATHWORKS AdvancedG               the value must be at       Server is to be installed, thecH               least_._._.________________value_must_be_at_least_._._.___  H               50_________________________75_____________________________  ?               To ensure that your system has enough free global                sections:   %               1. Enter the following:_  =                  $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLSECTS")i  E                  The value of the GBLSECTIONS parameter is displayed._                  For example:e                    75s  B               2. If the value is less than required, edit the fileC                  SYS$SYSTEM:MODPARAMS.DAT and add a line similar too                  the following:   %                  ADD_GBLSECTIONS = 75   #               PROCSECTCNT parameter_  C               The minimum value of this parameter differs dependingtA               on which server is to be installed, as described ine=               Table 1-4, PROCSECTCNT Parameter Minimum Value.   H                        Before You Install PATHWORKS Advanced Server 1-13 o  n      4         Before You Install PATHWORKS Advanced Server"         1.9 Pre-installation Tasks  H               Table_1-4_PROCSECTCNT_Parameter_Minimum_Value_____________                  For the standaloneB               license server only        If the PATHWORKS AdvancedG               the value must be at       Server is to be installed, the H               least_._._.________________value_must_be_at_least_._._.___  H               32_________________________40_____________________________  >               To ensure that the value of the system parameter&               PROCSECTCNT is adequate:  %               1. Enter the following:v  ;                  $ WRITE SYS$OUTPUT F$GETSYI("PROCSECTCNT")e  E                  The value of the PROCSECTCNT parameter is displayed.n                  For example:                     40a  B               2. If the value is less than required, edit the fileC                  SYS$SYSTEM:MODPARAMS.DAT and add a line similar toa                  the following:   %                  MIN_PROCSECTCNT = 40t                 SCSNODE parameter   F               This parameter must be defined as your system's computerF               name. If you are running DECnet, the SCSNODE name should2               be the same as the DECnet node name.  F               To check whether the system parameter SCSNODE is defined-               as your system's computer name:s  B               1. Enter the following command at the system prompt:  7                  $ WRITE SYS$OUTPUT F$GETSYI("SCSNODE")n  -                  One of the following occurs:q  ?                  o  If SCSNODE is defined, the computer name is E                     displayed. For example, if your system's computern#                     name is SPEEDY:_  :                     $ WRITE SYS$OUTPUT F$GETSYI("SCSNODE")                       SPEEDY  G                  o  If SCSNODE is not defined, the computer name is note                     displayed.  9         1-14 Before You Install PATHWORKS Advanced Server_ _  _      H                             Before You Install PATHWORKS Advanced ServerH                                               1.9 Pre-installation Tasks  R               2. If SCSNODE is not defined, edit the file SYS$SYSTEM:MODPARAMS.DATH                  and define the parameter. For example, if your system'sB                  computer name is SPEEDY, edit the file so that it-                  contains the following line:a  #                  SCSNODE = "SPEEDY"   C                  If you edit the file SYS$SYSTEM:MODPARAMS.DAT, youaC                  must run the OpenVMS command procedure AUTOGEN andnD                  reboot the system either now or at some time before5                  configuring the server. For example:e  @                  $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT NOFEEDBACK  G                  For information about running AUTOGEN, see the OpenVMS )                  System Manager's Manual.   E               The SCSNODE parameter's pre-installation status affects E               what happens after you install and configure the serverv0               and reboot the system, as follows:  H         ________________________________________________________________         If SCSNODE    And_H         is_._._.______you_._._._____Then_the_server_._._._______________  3         Not defined   Do not        Does not start.                        define its  +         Already       Do not        Starts..         defined       define itt  B         Not defined   Define it     Starts, but the OpenVMS systemB                                     renames print and batch queuesE                                     to include the new computer name.lC                                     Therefore, you must requeue anyrC                                     existing print or batch jobs toeE                                     the new queues. You may also haverB                                     to rebuild the queue database.C                                     For information on these systemaE                                     management tasks, see the OpenVMS H         ____________________________System_Manager's_Manual.____________        H                        Before You Install PATHWORKS Advanced Server 1-15 i  t      4         Before You Install PATHWORKS Advanced Server"         1.9 Pre-installation Tasks  -         1.9.9 Step 9: Check the Queue Manager   C               It is not necessary to have the queue manager running B               during installation, but it must be running when youH               configure the server. You can enter the SHOW QUEUE/MANAGERD               command to check whether the queue manager is running:  "               $ SHOW QUEUE/MANAGER  B               If the queue manager is running, your OpenVMS system:               displays a message similar to the following:  C               Queue manager SYS$QUEUE_MANAGER, running, on CPEEDY::s  B               If the queue manager is not running, you can use the,               following command to start it:  #               $ START/QUEUE/MANAGERd  /         1.9.10 Step 10: Check Time Zone and TDFq  G               To check the time zone and time differential factor (TDF)lG               settings on the system, run the OpenVMS command procedure F               SYS$MANAGER:UTC$TIME_SETUP.COM. From the SYSTEM account,A               enter the following command to begin the procedure:l  /               $ @SYS$MANAGER:UTC$TIME_SETUP.COMm  G               PATHWORKS Advanced Server's internal time management uses G               Greenwich Mean Time (GMT). To properly represent the timeaF               in the local environment, the time zone information must5               be set up before the server is started.p  F               To set the time zone on your OpenVMS system, execute the*               following command procedure:  2               @ SYS$MANAGER:UTC$TIMEZONE_SETUP.COM  F               To set the time zone differential factor for the OpenVMS>               system, execute the following command procedure:  1               @ SYS$MANAGER:UTC$CONFIGURE_TDF.COM   B               If you change any time zone information, such as theH               daylight savings time setting, you must restart the server6               for the time to be properly represented.  G               For more information on running the command procedure and E               resetting time zone and TDF, see the section on setting C               time zone information in the OpenVMS System Manager's                Manual.a  9         1-16 Before You Install PATHWORKS Advanced Server            H                             Before You Install PATHWORKS Advanced ServerH                                               1.9 Pre-installation Tasks  +         1.9.11 Step 11: Check DECnet Statusi  C               It is not necessary to have DECnet running during the_D               installation, but DECnet must be running on the systemF               before you can configure the server, if you are planning-               to enable the DECnet transport.   2         1.9.11.1 Checking DECnet (Phase IV) Status  G               If you use DECnet (Phase IV), enter the following commandtF               to see whether it is running on the system where you are6               planning to install the server software:  %               $ MCR NCP SHOW EXECUTORt  H         ________________________________________________________________         If DECnet (Phase IV)H         is_._._.______________Then_._._.________________________________  E         Running               The system displays State = on as shown $                               below:  O                               Node Volatile Summary as of  16-SEP-1998 12:16:36   =                               Executor node = 12.691 (COBRAZ)y  2                               State           = onK                               Identification  = DECnet for OpenVMS AXP V7.1r  D         Not running           You can enter the following command to'                               start it:l  5                               $ @SYS$MANAGER:STARTNET   H         ________________________________________________________________  ,         1.9.11.2 Checking DECnet-Plus Status  G               If you use DECnet-Plus (formerly DECnet/OSI for OpenVMS), F               enter the following command to see whether it is runningH               on the system where you are planning to install the server               software:       H                        Before You Install PATHWORKS Advanced Server 1-17 n  t      4         Before You Install PATHWORKS Advanced Server"         1.9 Pre-installation Tasks  /               $ SHOW LOGICAL NET$STARTUP_STATUSr  H         ________________________________________________________________         If DECnet H         is_._._._____Then_._._._________________________________________  )         Running      The system displays:   L                      "NET$STARTUP_STATUS" = "RUNNING-ALL" (LNM$SYSTEM_TABLE)  E         Not running  You can enter the following command to start it:a  /                      $ @SYS$STARTUP:NET$STARTUPt  H         ________________________________________________________________  +         1.9.12 Step 12: Check TCP/IP Statuse  H               If you are planning to use the TCP/IP transport, make sureE               that TCP/IP is running and that the PATHWORKS IP (PWIP)yD               driver has been loaded. The procedure for starting theE               TCP/IP product and the PWIP driver differs depending on D               the TCP/IP product running on the system. Refer to theF               documentation for your TCP/IP product for information on6               how to start TCP/IP and the PWIP driver.  H               For example, for TCP/IP Services for OpenVMS V4.x, use theG               configuration procedure UCX$CONFIG.COM to enable the PWIP F               driver on TCP/IP startup, or enter the following OpenVMS               commands:   (               $ @SYS$STARTUP:UCX$STARTUP-               $ @SYS$STARTUP:UCX$PWIP_STARTUP   >               You can add these commands to the system startup               procedure.  H               For TCP/IP Services for OpenVMS V5, enable the PWIP driverD               using the configuration procedure TCPIP:CONFIG.COM, or3               enter the following OpenVMS commands:-  *               $ @SYS$STARTUP:TCPIP$STARTUP/               $ @SYS$STARTUP:TCPIP$PWIP_STARTUP     9         1-18 Before You Install PATHWORKS Advanced Server            H                             Before You Install PATHWORKS Advanced ServerH                                               1.9 Pre-installation Tasks  ;         1.9.13 Step 13: Check OpenVMS Cluster Configuration   G               You can run PATHWORKS Advanced Server on multiple OpenVMS D               cluster members (server nodes). To do so, follow these               steps:  G               1. On each system disk on which you want to run PATHWORKSt+                  Advanced Server, complete:6  7                  o  The tasks described in this chapterh  @                  o  The VMSINSTAL command procedure described inG                     Chapter 2, Installing the PATHWORKS Advanced Servern  A               2. On each cluster member that you want to use as ahA                  PATHWORKS Advanced Server, run the configurationmC                  command procedure (PWRK$CONFIG). This ensures thatmB                  each node has enough resources to run the server.  F                 ________________________Note  ________________________  A                 An OpenVMS cluster can include both VAX and Alpha C                 member nodes. The PATHWORKS Advanced Server can runlB                 on any VAX or Alpha cluster member that is runningD                 OpenVMS Version 7.1 or OpenVMS Version 7.2. However,?                 an OpenVMS cluster cannot support two differentrC                 versions of the file and print server (for example, >                 PATHWORKS V6 for OpenVMS (Advanced Server) and2                 Advanced Server V7.2 for OpenVMS).  C                 If external authentication is enabled in an OpenVMS_C                 cluster where the file server is not running on allrB                 member nodes, you should set up the nodes that areC                 not running the PATHWORKS Advanced Server to enable (                 external authentication.  =                 To enable external authentication on a member A                 node where you are not running the file and print-A                 server, perform the additional steps described in @                 Section 5.5, Setting Up External Authentication.  E                 _____________________________________________________       H                        Before You Install PATHWORKS Advanced Server 1-19    e      4         Before You Install PATHWORKS Advanced Server         1.10 Next Step           1.10 Next Step  >               To install PATHWORKS Advanced Server, proceed toB               Chapter 2, Installing the PATHWORKS Advanced Server.                                                                                  9         1-20 Before You Install PATHWORKS Advanced Server_                       H                                                                        2H         ________________________________________________________________  H                                 Installing the PATHWORKS Advanced Server      E               This chapter describes how to install the PATHWORKS foriG               OpenVMS (Advanced Server) software. You must follow theseiG               procedures regardless of whether you are upgrading from a_E               previous version of the server or installing the serveru!               for the first time.t  D               Before you begin the installation procedure, make sureG               that you have completed the pre-installation tasks listed_A               in Chapter 1, Before You Install PATHWORKS Advancede               Server.:  >               This chapter consists of the following sections:  >               o  Section 2.1, About the Installation Procedure  3               o  Section 2.2, Installing the Server   C               o  Section 2.3, Troubleshooting Installation Problems   (               o  Section 2.4, Next Steps  ,         2.1 About the Installation Procedure  H               The following sections describe the installation procedure               and what it does.             2.1.1 What is VMSINSTAL?  H               VMSINSTAL is the standard command procedure for installingA               software on the OpenVMS operating system. VMSINSTAL G               consists of a series of questions (prompts). Your answers G               to these questions provide VMSINSTAL with the information >               needed for installing PATHWORKS Advanced Server.    H                             Installing the PATHWORKS Advanced Server 2-1    l      0         Installing the PATHWORKS Advanced Server,         2.1 About the Installation Procedure  8         2.1.2 PATHWORKS Advanced Server Installation Kit  E               The VMSINSTAL installation kit includes several OpenVMS A               BACKUP save sets. The save set PWRKV60B060.A always_D               contains the file KITINSTAL.COM and the release notes.E               The savesets included in the software kit are listed ino(               the product release notes.  !         2.1.3 What VMSINSTAL Does   )               When you use VMSINSTAL, it:E  G               1. Determines whether the PATHWORKS for OpenVMS (NetWare)dA                  server is installed on the system, and if it is, @                  optionally removes the NetWare server software.  G               2. Creates PATHWORKS Advanced Server accounts on the file &                  server, if necessary.  G               3. Restores the files from the save sets in the installa-                   tion kit.  E               4. Creates DECnet objects, if you are running DECnet ors                  DECnet-Plus.i  C               5. Installs the PATHWORKS Advanced Server DCL command !                  definition file.t  E               6. Installs the PATHWORKS Advanced Server logical namesa"                  definition files.  (               7. Deletes obsolete files.  >               8. Installs the PATHWORKS Advanced Server files.  >               9. Verifies that the software has been installedH                  successfully. (See Section 5.2, Verifying the PATHWORKS@                  for OpenVMS (Advanced Server) Installation, forH                  information on how to run the Installation Verification:                  Procedure after installing the software.)  !         2.2 Installing the Serverm  H               The following sections describe how to prepare informationD               required during the installation procedure, and how toD               specify the required information during the procedure.  4         2-2 Installing the PATHWORKS Advanced Server           H                                 Installing the PATHWORKS Advanced ServerH                                                2.2 Installing the Server  (         2.2.1 Before You Start VMSINSTAL  F               Before you start the VMSINSTAL command procedure, answer&               the following questions:  0               1. What is the product identifier?  G                  The product identifier tells VMSINSTAL which save setsDD                  to copy from the media to a disk on the system. TheE                  product identifier for PATHWORKS Advanced Server is:                     PWRKV60B060  D               2. What is the name of the device on which you want to!                  mount the media?   A                  The device name depends on the type of media andEG                  computer you have. For example, if you want to mount aaE                  CD-ROM on the CD-ROM drive of your Alphastation 400, 1                  the device name might be DKA400.S  F               3. Do you want to access the online release notes during,                  the installation procedure?  C                  You can tell VMSINSTAL to ask you whether you want D                  to display or print the online release notes duringE                  installation. Because the release notes may describe H                  important changes to the installation procedure, CompaqH                  recommends that you read them. Procedures for obtainingH                  the release notes are described in Section 1.6, Reading#                  the Release Notes.a  A               4. Do you want to install just the Upgrade utility?   H                  If the PATHWORKS V5 for OpenVMS (LAN Manager) server isE                  installed on the system, you are prompted to installdD                  the Upgrade utility separately, which allows you toE                  upgrade server database files before you install thee9                  PATHWORKS for OpenVMS (Advanced Server).O  C                  To install the PATHWORKS Advanced Server, you must ?                  upgrade the server databases. If you choose to F                  install just the Upgrade utility, you can install theH                  PATHWORKS Advanced Server later, after you upgrade yourH                  databases. If you install the PATHWORKS Advanced ServerA                  software, the Upgrade utility is also installed.n  E               5. Do you want to preserve the PATHWORKS V5 for OpenVMS_=                  (LAN Manager) environment, and if so, where?   H                             Installing the PATHWORKS Advanced Server 2-3           0         Installing the PATHWORKS Advanced Server!         2.2 Installing the Servery  H                  If you are upgrading from PATHWORKS V5 for OpenVMS (LANF                  Manager), you can choose to have the PATHWORKS V5 forH                  OpenVMS (LAN Manager) data files copied to the locationG                  you specify in the installation procedure. This allows B                  you to roll back to PATHWORKS V5 for OpenVMS (LANC                  Manager) later, after configuring and starting the B                  PATHWORKS Advanced Server. Refer to the PATHWORKSE                  for OpenVMS (Advanced Server) Server Migration Guide B                  for more information about the PATHWORKS Rollback                  procedure.   D                  If you have V4.x of PATHWORKS for OpenVMS, you mustB                  upgrade to PATHWORKS V5 for OpenVMS (LAN Manager)E                  before installing PATHWORKS V6 for OpenVMS (Advanced H                  Server). For instructions on upgrading from V4.x to V5,F                  see the PATHWORKS for OpenVMS Server Migration Guide.  A               6. Do you want to install PATHWORKS Advanced Server                   software?  ?                  This option allows you to install the completeG@                  PATHWORKS for OpenVMS (Advanced Server) server,A                  including the Upgrade utility and the integrated                    license server,  F               7. Do you want to install the standalone license server?  B                  If the system is designated to run the standaloneC                  license server, you can install the license servereB                  software only. Compaq recommends that you run theB                  standalone license server on a designated license                  server system.   C                  The installation procedure gives you the option toED                  install the standalone license server software fromE                  the PATHWORKS for OpenVMS (Advanced Server) software D                  kit. In this case, the PATHWORKS Advanced Server isC                  not installed. If the PATHWORKS Advanced Server is D                  installed, you cannot choose the standalone license,                  server installation option.  I               8. Do you want to install PATHWORKS External Authenticationu                  software only?o    4         2-4 Installing the PATHWORKS Advanced Server S  P      H                                 Installing the PATHWORKS Advanced ServerH                                                2.2 Installing the Server  B                  On OpenVMS clusters, you can install the ExternalH                  Authentication software only. This is useful on clusterE                  member nodes that are not going to run the PATHWORKStH                  Advanced Server. For more information, see Section 1.5,/                  About External Authentication.t  A               9. What is the User Identification Code (UIC) groupe                  number?  E                  The PATHWORKS Advanced Server installation procedureoC                  creates the OpenVMS user accounts PWRK$DEFAULT and B                  PWRK$GUEST, if they do not already exist. When anF                  OpenVMS user account is created, it is assigned a UICE                  group number. The default selection displayed by therA                  installation procedure is determined as follows:u  H                  _______________________________________________________H                  If_._._.___________________The_default_is_._._.________  F                  You are installing         The first available unusedF                  PATHWORKS Advanced Server  UIC group number, starting5                  for the first time         with 360.e  A                  If PATHWORKS V5 for        The same group number C                  OpenVMS (LAN Manager)      as that associated with_@                  is currently installed,    the existing account9                  an account named           PCFS$ACCOUNT._%                  PCFS$ACCOUNT already                   existsd  H                  If the file server         The same group number as theH                  accounts_already_exist_____existing_accounts.__________  $         2.2.2 How to Start VMSINSTAL  !               To start VMSINSTAL:   E               1. Ensure that you are logged in to the SYSTEM account.   E               2. Load the installation kit media onto a drive. (It is D                  not necessary to mount the drive, but it must be onG                  line so that the installation procedure can mount it.)   G               3. Enter the following command to check the status of the_F                  device on which you have loaded the installation kit,F                  replacing device_name with the name of the applicable                  device:  H                             Installing the PATHWORKS Advanced Server 2-5 t  n      0         Installing the PATHWORKS Advanced Server!         2.2 Installing the Server   *                  $ SHOW DEVICE device_name                    For example:R  '                  $ SHOW DEVICE $1$DUS0:a  M                  Device             Device  Error  Volume  Free    Trans  Mnt_M                   Name              Status  Count  Label   Blocks  Count  Cnt M                  $1$DUS0: (HSC001)  Mounted     0  HUBSYS  347718    628    4   E                  If the device status is Offline, enter the following_F                  command to place the device online, replacing device_3                  name with the name of your device:   3                  $ SET DEVICE/AVAILABLE device_name_  =               4. Change your default directory to SYS$UPDATE:   )                  $ SET DEFAULT SYS$UPDATE   D               5. Start VMSINSTAL and specify the PWRKV60B060 product>                  identifier, the media device, and whether youC                  want access to the online release notes during thet(                  installation procedure:  H         ________________________________________________________________H         If_you_._._.______________Then_enter_._._.______________________  D         Want access to the        @VMSINSTAL PWRKV60B060 device_name+         release notes during the  OPTIONS N,         installation procedure  D         Do not want access        @VMSINSTAL PWRKV60B060 device_name         to the release notes         during the installationtH         procedure_______________________________________________________  '         2.2.3 How to Respond to PromptsS  ?               An asterisk (*) at the beginning of a line in thesE               installation procedure identifies a prompt to which youC               must respond.   @               Usually the prompt has a default answer, which theC               procedure displays in square brackets ([]) at the endo               of the question.  ?               To accept a default, press <Return>. For example:R  U               * Are you satisfied with the backup of your system disk [YES]? <Return>   4         2-6 Installing the PATHWORKS Advanced Server    v      H                                 Installing the PATHWORKS Advanced ServerH                                                2.2 Installing the Server  /         2.2.4 How to Interrupt the Installationl  H               To interrupt the installation procedure, press <Ctrl/Y> atF               any time. Then you can restart the installation from the               beginning.  2         2.2.5 How to Answer Installation Questions  A               Table 2-1 tells you how to respond to the questions !               VMSINSTAL displays.c  F                 ________________________Note  ________________________  <                 Table 2-1 shows only the questions VMSINSTAL<                 displays; it does not show any informationalD                 messages. For a complete sample installation script,@                 see Appendix B, Sample PATHWORKS Advanced Server9                 Installation and Configuration Procedure._  E                 _____________________________________________________V  H               Table_2-1_Installation_Questions__________________________  I               For this           If you want the installa-    Enter . . .sH               question_._._._____tion_procedure_to_._._.________________  F               Are you satisfied  Continue                     <Return>               with the backup                of your system               disk [YES]?   @                                  Exit                         NO  H                                                 (continued on next page)                      H                             Installing the PATHWORKS Advanced Server 2-7 g         0         Installing the PATHWORKS Advanced Server!         2.2 Installing the Servero  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . .mH               question_._._._____tion_procedure_to_._._.________________  ?               Select option      Display the release notes    1 E               [2]:[1]            on the screen                To stop   A                                                               the H                                                               display atG                                                               any time, C                                                               presssG                                                               <Ctrl/C>.a  F                                  Print the release notes      <Return>  A                                                               The E                                                               release H                                                               notes fileE                                                               is sent D                                                               to theE                                                               defaultoC                                                               print C                                                               queueiH                                                               SYS$PRINT.E                                                               You canuG                                                               enter the E                                                               name of1E                                                               another C                                                               print D                                                               queue.  H               [1]This_question_is_displayed_only_if_you_specify_OPTIONS_  D               N when you start the VMSINSTAL command procedure or if7               there are active processes on the system.   H                                                 (continued on next page)              4         2-8 Installing the PATHWORKS Advanced Server           H                                 Installing the PATHWORKS Advanced ServerH                                                2.2 Installing the Server  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . .fH               question_._._._____tion_procedure_to_._._.________________  ?                                  Print the release notes and  3 E                                  display them on the screen   To senda  A                                                               thenE                                                               releasepF                                                               notes toE                                                               another.C                                                               printiD                                                               queue,G                                                               enter the E                                                               name of E                                                               another C                                                               print.D                                                               queue.  E                                                               To stopeH                                                               the screenH                                                               display atG                                                               any time, C                                                               pressIG                                                               <Ctrl/C>.f  ?                                  Continue without displaying  4 A                                  or printing the release      The E                                  notes                        release   G                                                               notes arefF                                                               automat-D                                                               icallyG                                                               copied toeG                                                               SYS$HELP.a  H                                                 (continued on next page)              H                             Installing the PATHWORKS Advanced Server 2-9 i  t      0         Installing the PATHWORKS Advanced Server!         2.2 Installing the ServerP  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . . H               question_._._._____tion_procedure_to_._._.________________  F               Do you want        Install one or more servers  <Return>               to install the               upgrade utilityS               only [NO]?[2]   A                                  Install only the Upgrade     YES (                                  utility  A               Do you want to     Continue                     YES                continue the               installation               [NO]?[1]  F                                  Exit                         <Return>  A               Do you want        Install the PATHWORKS        YESt0               to install         Advanced Server               the complete               PATHWORKS V6.0Bc               for OpenVMS [NO]?   F                                  Omit the PATHWORKS Advanced  <Return>'                                  Server   H               [1]This_question_is_displayed_only_if_you_specify_OPTIONS_  D               N when you start the VMSINSTAL command procedure or if7               there are active processes on the system.bB               [2]This question is displayed only if your system isE               currently running the previous version of PATHWORKS forr               OpenVMS.  H                                                 (continued on next page)              5         2-10 Installing the PATHWORKS Advanced Servert e  g      H                                 Installing the PATHWORKS Advanced ServerH                                                2.2 Installing the Server  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . . H               question_._._._____tion_procedure_to_._._.________________  F               Do you want to     Retain the PATHWORKS V5      <Return>:               preserve the V5    for OpenVMS (LAN Manager)<               (LAN Manager)      environment so that you can;               environment        use the rollback procedurer;               [YES]?[2]          described in the PATHWORKSW6                                  for OpenVMS (Advanced9                                  Server) Server Migration &                                  Guide  @                                  Not retain the V5            NO,                                  environment  F               Enter the          Preserve the V5 environment  <Return>9               directory to       in the default directory &               preserve the       shown               V5 environment*               [SYS$SYSDEVICE:[000000]]:[3]  ?                                  Preserve the V5 environment  AaG                                  on another device or in      differenthG                                  another directory            device or H                                                               directory.  H               [2]This_question_is_displayed_only_if_your_system_is______  E               currently running the previous version of PATHWORKS fore               OpenVMS.@               [3]This question is displayed only if you chose toA               preserve the PATHWORKS V5 for OpenVMS (LAN Manager)P               environment.  H                                                 (continued on next page)                H                            Installing the PATHWORKS Advanced Server 2-11           0         Installing the PATHWORKS Advanced Server!         2.2 Installing the ServerS  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . .aH               question_._._._____tion_procedure_to_._._.________________  A               Do you want        Install the standalone       YESiB               to install the     license server               ThisD               PATHWORKS license                               optionF               server only                                     installsA               [NO]?[4]                                        the   E                                                               license H                                                               server andG                                                               transport F                                                               softwareE                                                               withouteA                                                               theaG                                                               PATHWORKS F                                                               AdvancedE                                                               Server. F                                                               Refer toH                                                               Chapter 4,I                                                               ConfiguringRA                                                               and2F                                                               StartingA                                                               thelH                                                               StandaloneE                                                               LicenseiH                                                               Server forF                                                               more in-H               ________________________________________________formation.D               [4]This question is displayed only if you chose not to4               install the PATHWORKS Advanced Server.  H                                                 (continued on next page)                    5         2-12 Installing the PATHWORKS Advanced Serverd u  s      H                                 Installing the PATHWORKS Advanced ServerH                                                2.2 Installing the Server  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . .aH               question_._._._____tion_procedure_to_._._.________________  F                                  Install the PATHWORKS        <Return>B                                  Advanced Server with the     ThisD                                  license server               option  D                                                               causesE                                                               the in-CH                                                               stallationG                                                               procedureeH                                                               to proceedD                                                               to theB                                                               nextG                                                               question.   A               Do you want to     Install only the external    YES B               install only       authentication software      ThisD               the External                                    optionF               Authentication                                  installsA               images [NO]?[4]                                 the   F                                                               externalE                                                               authen-RF                                                               ticationF                                                               softwareE                                                               without A                                                               theeG                                                               PATHWORKS F                                                               AdvancedE                                                               Server.   H               [4]This_question_is_displayed_only_if_you_chose_not_to____  4               install the PATHWORKS Advanced Server.  H                                                 (continued on next page)            H                            Installing the PATHWORKS Advanced Server 2-13           0         Installing the PATHWORKS Advanced Server!         2.2 Installing the Serverm  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . ._H               question_._._._____tion_procedure_to_._._.________________  F                                  Install the complete         <Return>B                                  PATHWORKS Advanced Server    ThisD                                  or install the standalone    optionD                                  license server               causes  E                                                               the in- H                                                               stallationG                                                               proceduretG                                                               to repeattA                                                               the F                                                               previousG                                                               questionsfE                                                               so thatrE                                                               you can H                                                               select theF                                                               completeG                                                               PATHWORKS F                                                               AdvancedG                                                               Server ortF                                                               only theE                                                               licenselE                                                               server.   F               Is the selection   Use the selection            <Return>               correct [YES]?  @                                  Change the selection         NO  F                                  Terminate the installation   <Ctrl/Y>  F               Will you allow a   Shut down the system         <Return>7               system shutdown    as part of the producte7               after this         installation procedureP               product is               installed [YES]?  H                                                 (continued on next page)      5         2-14 Installing the PATHWORKS Advanced Server            H                                 Installing the PATHWORKS Advanced ServerH                                                2.2 Installing the Server  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . . H               question_._._._____tion_procedure_to_._._.________________  @                                  Complete the installation    NOD                                  procedure without shutting   SystemF                                  down the system              shutdown  @                                                               isG                                                               required,a@                                                               toF                                                               completeA                                                               the E                                                               product G                                                               installa- F                                                               tion. IfH                                                               you answerE                                                               NO, you G                                                               must shut F                                                               down theD                                                               systemF                                                               manuallyG                                                               after the E                                                               instal- D                                                               lationG                                                               procedure @                                                               isG                                                               finished.   F               Do you want to     Reboot the system            <Return>;               do an automatic    automatically after system )               system reboot      shutdown                [YES]?  @                                  Reboot the system manually   NO  F               Do you want to     Run the Installation         <Return>7               run the IVP after  Verification Procedure :               the installation   (IVP) automatically after;               is finished        the installation procedure_*               [YES]?             completes  H                                                 (continued on next page)  H                            Installing the PATHWORKS Advanced Server 2-15    c      0         Installing the PATHWORKS Advanced Server!         2.2 Installing the Server   H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . . H               question_._._._____tion_procedure_to_._._.________________  @                                  Not run the IVP              NO  E                                                               You can.E                                                               run theeG                                                               IVP inde-eH                                                               pendent ofE                                                               the in- H                                                               stallationH                                                               procedure.A                                                               For F                                                               detailedF                                                               informa-E                                                               tion onaE                                                               runningnE                                                               the IVPrF                                                               indepen-E                                                               dently,sA                                                               see J                                                               Section 5.2,G                                                               VerifyingnA                                                               the G                                                               PATHWORKS A                                                               forpE                                                               OpenVMS G                                                               (AdvancedeE                                                               Server)oK                                                               Installation.a  F               Do you want        Purge all files it replaces  <Return>               to purge files               replaced by this               installation               [YES]?  @                                  Not purge any files it       NO)                                  replaces   H                                                 (continued on next page)    5         2-16 Installing the PATHWORKS Advanced ServerA n         H                                 Installing the PATHWORKS Advanced ServerH                                                2.2 Installing the Server  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . .IH               question_._._._____tion_procedure_to_._._.________________    F               Do you want to     Delete the files and         <Return>:               continue with      continue the installation               the installation               [YES]?[5]n  @                                  Leave the files intact and   NO;                                  terminate the installation   F               Do you want to     Shut down the license        <Return>8               shut down the      server and continue the-               PATHWORKS license  installation                server [YES]?[6]  @                                  Keep the server running and  NO;                                  terminate the installationc  F               Do you want        Shut down the server and     <Return>:               to shut down       continue the installation               the PATHWORKSt               Advanced Servere               [YES]?[6]r  @                                  Keep the server running and  NO;                                  terminate the installationl  F               Enter default UIC  Associate the newly          <Return>9               group number for   created OpenVMS accountsd<               PWRK$DEFAULT and   PWRK$DEFAULT and PWRK$GUEST6               PWRK$GUEST[nnn]:   with the default user:                                  identification code (UIC)3                                  group number (nnn)l  H               [5]This_question_is_displayed_only_if_there_are_PATHWORKS_  3               files in system-specific directories.oH               [6]This question is displayed only if a server is running.  H                                                 (continued on next page)  H                            Installing the PATHWORKS Advanced Server 2-17 S  A      0         Installing the PATHWORKS Advanced Server!         2.2 Installing the Serveri  H               Table_2-1_(Cont.)_Installation_Questions__________________  I               For this           If you want the installa-    Enter . . .dH               question_._._._____tion_procedure_to_._._.________________  F                                  Associate the newly created  A three-G                                  accounts with the UIC group  digit UIC E                                  number you specify           number.>  A                                                               For F                                                               detailedF                                                               informa-H                                                               tion aboutG                                                               UIC grouprF                                                               numbers,E                                                               see thepE                                                               OpenVMShD                                                               SystemG                                                               Manager'srH               ________________________________________________Manual.___  1         2.3 Troubleshooting Installation Problems   C               The following sections describe some problems you canIG               encounter if you install the PATHWORKS Advanced Server inl5               an environment that is not appropriate.i  G         2.3.1 Installing the PATHWORKS Advanced Server on a System with_                the NetWare Server  D               The PATHWORKS Advanced Server cannot be installed on aF               system where the NetWare server is installed. If you at-H               tempt to install the PATHWORKS Advanced Server on a systemE               where the NetWare server is installed, the installationHF               procedure optionally invokes the NetWare server software@               removal procedure (SYS$STARTUP:PWVN$DEINSTAL.COM).  E               When the installation procedure detects the presence of G               the NetWare server, it displays the following message and                question:           5         2-18 Installing the PATHWORKS Advanced Server            H                                 Installing the PATHWORKS Advanced ServerH                                2.3 Troubleshooting Installation Problems  O               %PWRKV60B-E-OLDVERPWNV, PATHWORKS V6.0-nnnx for OpenVMS (NetWare)aM               was previously installed.  This product is no longer supported. M               To install the PATHWORKS V6.0B for OpenVMS product, the NetWare *               product must be deinstalled.  G               * Will you allow this installation procedure to deinstall )               * the NetWare product [NO]?   ?               To remove the NetWare server software, enter YES.   F               To terminate the installation procedure without removingG               the NetWare server software, enter NO, or press <Return>.   B               You can remove the NetWare server manually using theF               procedure in Section 7.2, Removing the PATHWORKS NetWareH               Server. Then start the VMSINSTAL procedure again after the.               NetWare server has been removed.  C         2.3.2 Installing PATHWORKS Advanced Server on a System with 4               PATHWORKS V5 for OpenVMS (LAN Manager)  @               You can upgrade PATHWORKS V5 for OpenVMS (AdvancedD               Server) to PATHWORKS V6 for OpenVMS (Advanced Server).F               If the system has PATHWORKS V5 for OpenVMS (LAN Manager)F               installed, you can use the Upgrade utility, as describedC               in the PATHWORKS for OpenVMS (Advanced Server) ServerdG               Migration Guide, to upgrade server information before youT@               configure and start the PATHWORKS Advanced Server.  B         2.3.3 Installing the Standalone License Server on a SystemD               Where the PATHWORKS Advanced Server Has Been Installed  F               If you install the standalone license server on a systemE               where the PATHWORKS Advanced Server has been installed, H               the installation procedure displays the following message:  Z               The PATHWORKS Advanced Server was previously installed and you have selectedX               to install the license server only.  Because the PATHWORKS Advanced ServerQ               includes the license server, the complete PATHWORKS Advanced Server                 must be installed.  ?               The installation procedure will choose to install C               the PATHWORKS Advanced Server. You have the option of E               continuing with this installation, or you can terminate A               the installation procedure by pressing <Ctrl/Y>. To C               install the standalone license server on this system, A               you must first remove the PATHWORKS Advanced Server   H                            Installing the PATHWORKS Advanced Server 2-19 e  c      0         Installing the PATHWORKS Advanced Server1         2.3 Troubleshooting Installation Problems   H               software using the PWRK$DEINSTAL.COM command procedure, asH               described in Chapter 7, Removing PATHWORKS Advanced ServerA               Software. Then start the VMSINSTAL procedure again.   D               For a sample installation and configuration script forC               the standalone license server, see Appendix C, Sample F               Standalone License Server Installation and Configuration               Procedure.  =         2.3.4 Installing the External Authentication Software   E               You cannot install the External Authentication software B               only, if you have previously installed the PATHWORKSB               Advanced Server. The installation procedure displaysF               the following message if you try to install the External>               Authentication images under these circumstances:  U         The PATHWORKS Advanced Server was previously installed, and you have selectedcG         to install the External Authentication images only. Because the R         PATHWORKS Advanced Server includes the External Authentication images, theB         complete PATHWORKS Advanced Server must also be installed.  D               You must remove the PATHWORKS Advanced Server softwareC               to be able to select this option. To remove PATHWORKS H               Advanced Server software, run the PWRK$DEINSTAL procedure,D               as described in Chapter 7, Removing PATHWORKS Advanced               Server Software.  ?               For a sample installation script for the External D               Authentication images, see Appendix E, Sample External4               Authentication Installation Procedure.           2.4 Next Steps  H               To continue, depending on the software you are installing,&               do one of the following:  H         ________________________________________________________________G                                                     Which tells you how H         If_you_are_._._.______Proceed_to_._._.______to_._._.____________  A         Installing the        Chapter 3,            Configure the F         PATHWORKS Advanced    Configuring the       PATHWORKS Advanced;         Server                PATHWORKS Advanced    Server. $                               Server  5         2-20 Installing the PATHWORKS Advanced Server            H                                 Installing the PATHWORKS Advanced ServerH                                                           2.4 Next Steps  H         ________________________________________________________________G                                                     Which tells you how H         If_you_are_._._.______Proceed_to_._._.______to_._._.____________  A         Installing the        Chapter 4,            Configure the F         standalone license    Configuring and       standalone license;         server                Starting the          server.U0                               Standalone License$                               Server  C         Upgrading from        PATHWORKS for         Use the Upgrade E         PATHWORKS V5          OpenVMS (Advanced     utility to createyD         for OpenVMS (LAN      Server) Server        and edit upgrade<         Manager)              Migration Guide       reports.  D         Installing the        Section 5.5,          Set up PATHWORKSD         PATHWORKS External    Setting Up External   external authen-C         Authentication        Authentication        tication on theKH         software_only_______________________________system._____________                                                    H                            Installing the PATHWORKS Advanced Server 2-21 _  _                  H                                                                        3H         ________________________________________________________________  H                                Configuring the PATHWORKS Advanced Server      C               This chapter describes how to configure the PATHWORKSoE               Advanced Server and consists of the following sections:   A               o  Section 3.1, About the PATHWORKS Advanced Server (                  Configuration Procedure  E               o  Section 3.2, Before You Start the PATHWORKS Advanced /                  Server Configuration Procedure   H               o  Section 3.3, How to Start the PATHWORKS Advanced Server(                  Configuration Procedure  B               o  Section 3.4, How to Respond to PATHWORKS Advanced-                  Server Configuration Prompts   A               o  Section 3.5, How to Change Default Configuration                   Settings   E               o  Section 3.6, Troubleshooting Configuration Procedure                   Problems   E               o  Section 3.7, Selecting the PATHWORKS Advanced Server                   Network Device   =               o  Section 3.8, Defining Communications Devices   (               o  Section 3.9, Next Steps  G         3.1 About the PATHWORKS Advanced Server Configuration Procedure   D               The following sections describe the PATHWORKS Advanced>               Server configuration procedure and what it does.      H                            Configuring the PATHWORKS Advanced Server 3-1           1         Configuring the PATHWORKS Advanced Server G         3.1 About the PATHWORKS Advanced Server Configuration Procedure   2         3.1.1 What Is the Configuration Procedure?  E               PWRK$CONFIG.COM, the PATHWORKS Advanced Server configu- F               ration procedure, is installed by the PATHWORKS Advanced,               Server installation procedure.  @               Like the installation procedure, the configurationE               procedure asks you a series of questions (by displayingmH               prompts). The procedure uses your answers to configure the(               PATHWORKS Advanced Server.  3         3.1.2 What the Configuration Procedure Doesa  6               PWRK$CONFIG is a command procedure that:  >               o  Creates the PATHWORKS Advanced Server on-diskD                  structure. (Refer to Appendix F, PATHWORKS AdvancedH                  Server Files and On-Disk Structure, for a list of files=                  and a description of the on-disk structure).T  H               o  Allows you to enter the Configuration Manager to modifyH                  system configuration parameters, such as the transportsF                  the server will run and the maximum number of clients?                  that can connect to the server simultaneously.   G               o  Creates the PATHWORKS Advanced Server user account and !                  share databases.   B               o  Allows you to modify server configuration defaultE                  settings such as server role, domain name, and which &                  services are enabled.  F               o  Allows you to set or change the Administrator account                  password.  =               o  Gives you the option of starting the server.   D               After you install the server, you must run PWRK$CONFIGE               before you can start the server. In an OpenVMS cluster, D               you must run PWRK$CONFIG on each individual node whereD               the PATHWORKS Advanced Server will run, before you canA               start the server. (Although the nodes in an OpenVMS @               cluster function as a single unit in a domain, youD               need to treat them as individual units for purposes ofH               configuration.) For more information, read the informationG               on the Configuration Manager in the PATHWORKS for OpenVMS =               (Advanced Server) Server Administrator's Guide.   5         3-2 Configuring the PATHWORKS Advanced Server            H                                Configuring the PATHWORKS Advanced ServerH  Before  You Start the PATHWORKS Advanced Server Configuration Procedure  :         3.2 Before You Start the PATHWORKS Advanced Server#             Configuration Procedure   H               Before you start the PWRK$CONFIG command procedure, answer&               the following questions:  E               1. On what OpenVMS disk device do you want to store the 0                  following PATHWORKS data files?  1                  o  Configuration parameter files   -                  o  License server data files                     o  Log files   '                  o  Printer spool filesn  %                  o  Server data filest  0                  o  Virtual memory section files  H                  By default, the configuration procedure copies the dataF                  files to the disk device SYS$SYSDEVICE:. However, youF                  can specify any existing OpenVMS disk device that hasD                  at least 79,500 free blocks of disk space. When youH                  choose a disk device for the PATHWORKS data files, keep'                  the following in mind:   E                  -  The PATHWORKS Advanced Server frequently accesses G                     the data files copied to the specified disk device, F                     which generates input to and output from the disk.D                     Having these operations occur on the system diskC                     can degrade the performance of both the OpenVMS E                     system and the server. Therefore, Compaq ComputernB                     Corporation recommends that you specify a disk6                     device other than the system disk.  E                  -  On an OpenVMS cluster with multiple system disks, D                     all nodes on which you plan to run the PATHWORKSD                     Advanced Server must use the same disk device toE                     store and access PATHWORKS Advanced Server files.   @                  -  The configuration procedure may be run againC                     after you complete the installation and initial G                     configuration of the PATHWORKS Advanced Server. YouoE                     may specify a different disk at that time to movetH                     the existing PATHWORKS Advanced Server data files to,                     a different disk volume.  H                            Configuring the PATHWORKS Advanced Server 3-3           1         Configuring the PATHWORKS Advanced Server>R         3.2 Before You Start the PATHWORKS Advanced Server Configuration Procedure  ?               2. Do you want to change the system configurationn                   parameters now?  D                  If you enter YES to the prompt to change the systemG                  configuration parameters, the Configuration Manager isiE                  started. The Configuration Manager is a utility thatpF                  allows you to modify server configuration parameters,G                  such as the maximum number of clients that can connect F                  to the server and which network transports the server                  uses.  ?                  Whether or not you choose to change the systemrG                  configuration at this time, you can change it later bynF                  entering the ADMINISTER/CONFIG command at the OpenVMS                  system prompt:n  $                  $ ADMINISTER/CONFIG  F                  For more information about transports and about usingH                  the Configuration Manager, refer to the Advanced Server:                  for OpenVMS Server Administrator's Guide.  F                  Configuring Transports for a Backup Domain Controller  C                  If you are configuring a server as a backup domain C                  controller (BDC), during the initial configuration C                  you must select at least one transport for the BDC G                  that will also be run by its primary domain controller ?                  (PDC). Otherwise, the configuration will fail.   @                  When you choose the transports to run, keep theG                  following in mind if the system will support wide area                   networking:  E                  -  If you are configuring a backup domain controller G                     to join an existing domain where the primary domain D                     controller is on a different TCP/IP subnet, bothG                     the backup domain controller and the primary domainlC                     controller must be configured to use the TCP/IPeG                     transport, and you must set up wide area networkingA@                     using either a WINS (Windows Internet NamingG                     Service) Server or an LMHOSTS file for network nameyG                     resolution, as described in Chapter 6, ImplementingK(                     a Wide Area Network.  5         3-4 Configuring the PATHWORKS Advanced Serverl    y      H                                Configuring the PATHWORKS Advanced ServerH  Before  You Start the PATHWORKS Advanced Server Configuration Procedure  C                  -  If you are using a WINS server for network name E                     resolution, both the backup domain controller and H                     the primary domain controller must use a WINS Server7                     to provide NetBIOS name resolution.s  E                  -  If you are using the LMHOSTS file, it must be set C                     up on both the backup domain controller and the G                     primary domain controller. Make sure that the entry G                     for the primary domain controller is in the LMHOSTS-C                     file on the backup domain controller before you G                     configure the backup domain controller. If there is E                     no entry for the primary domain controller in the E                     LMHOSTS file on the backup domain controller whenaG                     you configure it, the backup domain controller willrH                     not find the primary domain controller and will fail0                     to join the existing domain.  E                     To enable one or both of the wide area networkingwH                     implementations, select them using the Configuration?                     Manager. Refer to the PATHWORKS for OpenVMSnF                     (Advanced Server) Server Administrator's Guide for%                     more information.   F               3. Do you want to change any of the server configuration<                  default settings? These settings determine:  3                  o  Whether the license server runso  E                     The license server is a software program that youoC                     can run on your OpenVMS system to grant client-sG                     based licenses. Any client that wants to use serveryG                     resources must have a valid license. Each LAN needsRF                     only one PATHWORKS license server to serve client-B                     based licenses. The product authorization keysE                     (PAKs) must be loaded on the system that runs theeF                     PATHWORKS license server. If you are using server-H                     based licensing, the license server is not required.  E                     In an OpenVMS cluster, the PAKs must be loaded ondD                     all nodes that run the PATHWORKS license server.E                     This is best accomplished by adding the PAKs to ad,                     shared license database.  @                     By default, the license server does not run.  H                            Configuring the PATHWORKS Advanced Server 3-5 ,  e      1         Configuring the PATHWORKS Advanced ServerbR         3.2 Before You Start the PATHWORKS Advanced Server Configuration Procedure  B                     For detailed information on managing PATHWORKSG                     licenses, see the Advanced Server for OpenVMS Guide 9                     to Managing Advanced Server Licenses.T  7                  o  Whether the Timesource service runst  D                     The Timesource service allows your server to actB                     as a time server. Other servers on the networkF                     can synchronize with the time server to coordinateG                     network events (for example, running batch programs F                     on all computers the same time each day). Each LAN/                     needs only one time server.A  D                     By default, the Timesource service does not run.  4                  o  Whether the Alerter service runs  G                     The Alerter service sends messages called alerts toeG                     servers and clients that run the Messenger service.n  9                     By default, the Alerter service runs.   A                  o  Names of the users who receive alert messages   >                     By default, alert messages are sent to the*                     Administrator account.  <                  o  Whether the Netlogon service is enabled.  C                     In a domain, the Netlogon service distributes alE                     domain-wide user accounts database to all serverstC                     running Netlogon. The service allows for singlelB                     domain-wide logon that enables users to access:                     resources on any server in the domain.  C                     The Netlogon service is required on all primaryeH                     domain controllers and backup domain controllers. By7                     default, the Netlogon service runs.                     o  Domain namep  G                     This is the name of the domain in which your server F                     participates. A domain is a subdivision of clients/                     and servers on the network.w  H                     The default PATHWORKS Advanced Server domain name isG                     LANGROUP. Compaq recommends that you choose another (                     name for the domain.  &                  o  Role of the server  5         3-6 Configuring the PATHWORKS Advanced Servera n         H                                Configuring the PATHWORKS Advanced ServerH  Before  You Start the PATHWORKS Advanced Server Configuration Procedure  D                     This is the server's role in the domain. You canC                     designate a PATHWORKS Advanced Server as either G                     the primary domain controller or as a backup domaingG                     controller. In an OpenVMS cluster, all nodes on theK4                     cluster must have the same role.  !                  o  Computer name   G                     This is the unique name that identifies your servernA                     in the domain. You define this name or accept D                     the default value when you run the configuration                     procedure.  F                     By default, the PATHWORKS Advanced Server computerB                     name is the same as the system's SCSNODE name.  +                  o  PATHWORKS cluster aliast  E                     If your server is a member of an OpenVMS cluster,eD                     this is the network name that all servers in theE                     cluster use. The alias lets remote nodes (such asnG                     clients) treat the entire cluster as though it were C                     a single server. For example, a client user can H                     specify the PATHWORKS alias to connect to any serverD                     in the cluster; the user does not know (and doesC                     not need to know) to which server the client is                      connected.  F                     If DECnet is configured on the system, the defaultE                     is the same as the DECnet alias name. If not, the F                     default PATHWORKS Advanced Server cluster alias is6                     same as the OpenVMS cluster alias.  +                  o  Server announce commentA  B                     This is the description of the server that theA                     PATHWORKS Advanced Server broadcasts out when B                     it announces its presence on the network. ThisC                     description may also be displayed when you viewv0                     a list of available servers.  E                     The default server announce comment is "PATHWORKSo9                     V6.0B for OpenVMS (Advanced Server)."   D                  For detailed information on changing default serverG                  configuration settings, see Section 3.5, How to Changev0                  Default Configuration Settings.  <               4. What is the Administrator account password?  H                            Configuring the PATHWORKS Advanced Server 3-7    c      1         Configuring the PATHWORKS Advanced Server R         3.2 Before You Start the PATHWORKS Advanced Server Configuration Procedure  H                  If you are configuring a primary domain controller, theF                  configuration procedure prompts you to define a pass-E                  word for the PATHWORKS Advanced Server AdministratorS?                  account, from which you administer the server.iF                  Passwords are case sensitive and can contain up to 14H                  alphanumeric characters as well as any of the followingA                  special characters: ! # $ % & () - . ^ _ ` { } ~   1               5. Do you want to start the server?n  A                  The configuration procedure asks you if you wantuA                  to start the server. If you do not want to startgB                  the server at this time, you can do so later fromC                  the command line after the configuration procedureh                  completes.   H                  For detailed information on alternate ways to start theE                  server, see Section 5.3.4, Starting the File Server.   D         3.3 How to Start the PATHWORKS Advanced Server Configuration             Procedurec  E               After the installation procedure completes, the OpenVMSd?               system prompt ($) is displayed. If the system wasr.               rebooted following installation:  E               1. Ensure that you are logged in to the SYSTEM account.   ?               2. Start the configuration procedure by entering:   *                  $ @SYS$UPDATE:PWRK$CONFIG  E         3.4 How to Respond to PATHWORKS Advanced Server Configurationd             Promptsr  @               Table 3-1, PATHWORKS Advanced Server ConfigurationC               Prompts, tells you how to respond to the prompts thatA#               PWRK$CONFIG displays.M  F                 ________________________Note  ________________________  <                 Table 3-1 shows only the prompts PWRK$CONFIG<                 displays; it does not show any informational=                 messages. For a complete sample configurationT  5         3-8 Configuring the PATHWORKS Advanced Server  a  d      H                                Configuring the PATHWORKS Advanced ServerH    3.4 How to Respond to PATHWORKS Advanced Server Configuration Prompts  A                 script, see Appendix B, Sample PATHWORKS Advanced @                 Server Installation and Configuration Procedure.  E                 _____________________________________________________   H               Table_3-1_PATHWORKS_Advanced_Server_Configuration_Prompts_  I               At this            If you want the configura-   Enter . . . H               prompt_._._._______tion_procedure_to_._._.________________  F               Do you want to     Shut down the server or,     <Return>:               continue with      if your server is part of8               configuration      an OpenVMS cluster, all7               [YES]:[1]          servers in the clustero  @                                  Abort the configuration      NO*                                  procedure  F               Enter disk         Copy the PATHWORKS on-       <Return>6               device name        disk structure to the<               where PATHWORKS    default OpenVMS disk device*               data files         displayed7               will be stored     If you ran PWRK$CONFIGe8               [default_device]:  previously, the default  ;                                  disk device is the one you <                                  specified the last time you7                                  configured the server.s  E                                  Copy the PATHWORKS on-disk   device_rB                                  structure to an OpenVMS      name;                                  disk device different from 6                                  the default displayed  H               [1]This_prompt_is_displayed_only_if_the_server_is_running.  H                                                 (continued on next page)                H                            Configuring the PATHWORKS Advanced Server 3-9 s         1         Configuring the PATHWORKS Advanced Server M         3.4 How to Respond to PATHWORKS Advanced Server Configuration Prompts   G               Table 3-1 (Cont.) PATHWORKS Advanced Server Configuration H               __________________Prompts_________________________________  I               At this            If you want the configura-   Enter . . .yH               prompt_._._._______tion_procedure_to_._._.________________  F               Do you want to     Enter the Configuration      <Return>A               change the server  Manager tool                 ForsF               configuration                                   detailedF               parameters now?                                 informa-H               [YES]:                                          tion about  G                                                               using the K                                                               Configuration F                                                               Manager,C                                                               refertD                                                               to theG                                                               PATHWORKS A                                                               forfE                                                               OpenVMSaG                                                               (Advanced E                                                               Server) D                                                               ServerM                                                               Administrator'sdD                                                               Guide.  @                                  Continue the configuration   NO;                                  procedure without entering?:                                  the Configuration Manager  F               Enter item         Accept the configuration     <Return>5               number, or RETURN  parameters displayedo               to use these               values [DONE]:  H                                                 (continued on next page)                  6         3-10 Configuring the PATHWORKS Advanced Server w  h      H                                Configuring the PATHWORKS Advanced ServerH    3.4 How to Respond to PATHWORKS Advanced Server Configuration Prompts  G               Table 3-1 (Cont.) PATHWORKS Advanced Server ConfigurationDH               __________________Prompts_________________________________  I               At this            If you want the configura-   Enter . . .oH               prompt_._._._______tion_procedure_to_._._.________________  H                                  Change the configuration     The numberH                                  settings displayed           associatedD                                                               with aE                                                               settingtF                                                               you wantH                                                               to change.  A                                                               FornF                                                               detailedF                                                               informa-E                                                               tion onaF                                                               changingC                                                               thesetE                                                               defaultaE                                                               config-tE                                                               urationpG                                                               settings, A                                                               see)J                                                               Section 3.5,D                                                               How toD                                                               ChangeE                                                               DefaultRK                                                               ConfigurationaG                                                               Settings.n  F               Do you want to     Keep the existing            <Return>6               enter a new        Administrator account)               Administrator      password                account password               [NO]:[2,3]  H               [2]This_prompt_is_displayed_if_you_ran_PWRK$CONFIG________                 previously.aG               [3]This prompt is displayed only if you are configuring ak(               primary domain controller.  H                                                 (continued on next page)  H                           Configuring the PATHWORKS Advanced Server 3-11           1         Configuring the PATHWORKS Advanced Server M         3.4 How to Respond to PATHWORKS Advanced Server Configuration PromptsT  G               Table 3-1 (Cont.) PATHWORKS Advanced Server ConfigurationgH               __________________Prompts_________________________________  I               At this            If you want the configura-   Enter . . .xH               prompt_._._._______tion_procedure_to_._._.________________  A                                  Prompt you to enter a        YESg:                                  new Administrator account)                                  password   F               Enter AdministratorAssociate a password with    passwordE               network account    the Administrator account    If your D               password:[3]                                    server  E                                                               will be H                                                               part of anF                                                               existingE                                                               domain, G                                                               enter the F                                                               passwordD                                                               to theF                                                               existingF                                                               domain'sK                                                               Administrator F                                                               account.  F               Re-enter                                        password               to verifym               password:[3]  F               Do you want to     Start the server au-         <Return>6               start PATHWORKS    tomatically after the7               V6.0B for OpenVMS  installation procedurev*               on node node_name  completes               now [YES]:[3]   @                                  Not start the server         NOH               [3]This_prompt_is_displayed_only_if_you_are_configuring_a_  (               primary domain controller.H               __________________________________________________________        6         3-12 Configuring the PATHWORKS Advanced Server o  e      H                                Configuring the PATHWORKS Advanced ServerH                         3.5 How to Change Default Configuration Settings  8         3.5 How to Change Default Configuration Settings  F               After you exit the Configuration Manager, the configura-D               tion procedure displays a list of server configurationB               settings and a prompt that lets you change them. For               example:  P           PATHWORKS V6.0B for OpenVMS is presently configured to run as follows:  2            1.  Run the license server:          NO2            2.  Enable Timesource service:       NO3            3.  Enable Alerter service:          YESr=            3a. Alert user names:                Administratoru3            4.  Enable Netlogon service:         YESc8            5.  Advanced Server domain:          LANGROUP7            6.  Advanced Server role:            PRIMARYt6            7.  Advanced Server computer name:   COBRAZ<            7a. PATHWORKS OpenVMS cluster alias: COBRAZ_ALIASW            8.  Server announce comment:   PATHWORKS V6.0B for OpenVMS (Advanced Server)t@         Enter item number, or RETURN to use these values [DONE]:  D               o  To change a server configuration setting, enter theC                  number of the setting you want to change. A promptmE                  is then displayed that lets you change that setting.mF                  Table 3-2, Configuration Settings, describes possible)                  values for each setting.t  E               o  To save the settings after you complete your changes D                  or to accept the settings displayed, press <Return>C                  to use the default answer DONE. For information on D                  completing the rest of the configuration procedure,F                  see Section 3.4, How to Respond to PATHWORKS Advanced.                  Server Configuration Prompts.  E               For a description of each server configuration setting, F               see Section 3.2, Before You Start the PATHWORKS Advanced-               Server Configuration Procedure.i                H                           Configuring the PATHWORKS Advanced Server 3-13 u  i      1         Configuring the PATHWORKS Advanced Serverr8         3.5 How to Change Default Configuration Settings  H         Table_3-2_Configuration_Settings________________________________  H         Setting_________________________Possible_Values_________________  G         1. Run the license server:      YES, to run the license server.hF                                         NO, to use the default and not?                                         run the license server.   E         2. Enable Timesource service:   YES, to enable the Timesource 0                                         service.F                                         NO, to use the default and notF                                         enable the Timesource service.  F         3. Enable Alerter service:      YES, to accept the default andC                                         enable the Alerter service.SB                                         NO, to disable the Alerter0                                         service.  F         3a. Alert user names:[1]        A comma-delimited list of userD                                         names (each containing up toG                                         20 characters), who can receiveO7                                         alert messages.n  F         4. Enable Netlogon service:     YES, to accept the default andD                                         enable the Netlogon service.C                                         NO, to disable the Netlogone0                                         service.  A         5. Advanced Server domain:      A domain name of up to 15 3                                         characters. A                                         Press <Return> to use thenH                                         default. The default domain nameF                                         is LANGROUP. Compaq recommendsE                                         that you specify another nameh7                                         for the domain.   H         6. Advanced Server role:        PRIMARY, to designate the serverH                                         as the primary domain controllerG                                         BACKUP, to designate the serverdF                                         as a backup domain controller.  H         [1]Displayed_only_if_Alerter_service_is_enabled.________________  H                                                 (continued on next page)  6         3-14 Configuring the PATHWORKS Advanced Server W  S      H                                Configuring the PATHWORKS Advanced ServerH                         3.5 How to Change Default Configuration Settings  H         Table_3-2_(Cont.)_Configuration_Settings________________________  H         Setting_________________________Possible_Values_________________  C         7. Advanced Server computer     A computer name of up to 15d3         name:                           characters.uA                                         Press <Return> to use thetE                                         default. If this is the firstaF                                         time running the configurationF                                         procedure, the default is your>                                         system's SCSNODE name.  G         7a. PATHWORKS OpenVMS cluster   The PATHWORKS cluster alias for D         alias:[2]                       the OpenVMS cluster to which<                                         your server belongs.A                                         Press <Return> to use thedH                                         default. If DECnet is configuredB                                         to run, the default is theG                                         DECnet cluster alias. If DECnetrE                                         is not configured to run, thenB                                         default is nodename_alias.  A         8. Server announce comment:     A text string of up to 48.G                                         characters that the server uses.G                                         to announce its presence on theY0                                         network.A                                         Press <Return> to use the 0                                         default.H         [2]Displayed_only_in_an_OpenVMS_cluster.________________________  H         ________________________________________________________________  <         3.6 Troubleshooting Configuration Procedure Problems  F               The following section describes how to ensure sufficient=               resources will be available to support clients.   >         3.6.1 Ensuring Sufficient Resources to Support Clients  C               PATHWORKS Advanced Server requests the resources that D               it needs using the OpenVMS AUTOGEN utility. If AUTOGENH               underestimates the resources required for use by processesG               other than PATHWORKS Advanced Server, and these resourcesaG               have already been consumed when PATHWORKS Advanced Server_F               is started, there may be insufficient resources left forH               PATHWORKS Advanced Server to support the desired number of               clients.  H                           Configuring the PATHWORKS Advanced Server 3-15 _  _      1         Configuring the PATHWORKS Advanced Servert<         3.6 Troubleshooting Configuration Procedure Problems  A               To ensure sufficient resource allocation to support @               clients, make sure that all software that will runF               concurrently with PATHWORKS Advanced Server is installedF               and started before you run the PATHWORKS Advanced ServerD               configuration procedure, especially if you run TCP/IP.  E               After you successfully configure the PATHWORKS Advancedt@               Server, it may not start, reporting that there areD               insufficient resources to support any clients. In thisF               case, examine the following file to determine the system2               resource that needs to be increased:  2               PWRK$LOGS:PWRK$CONFIG_ERROR_node.LOG  G               To increase the resource allocation, make the appropriate >               modifications to the MODPARAMS.DAT file and thenA               run AUTOGEN. Refer to Chapter 1, Before You Install C               PATHWORKS Advanced Server, for more information about =               the requirements for system parameter settings.t  B         3.7 Selecting the PATHWORKS Advanced Server Network Device  D               The configuration procedure selects the network deviceE               depending on the transport you specify when you run thesH               procedure. If the server has more than one network device,G               and you do not want to use the device selected, or if the G               server has a network device that is not recognized by the D               PATHWORKS Advanced Server, you can manually select theE               network device to use with the transport you specified.   G               Table 3-3, OpenVMS Network Device Logicals, lists OpenVMS_C               logical names that you can use to control the network G               device over which the PATHWORKS Advanced Server operates.oG               You must add these logicals to SYS$MANAGER:SYLOGICALS.COMd5               to have them available after rebooting.   H               Table_3-3_OpenVMS_Network_Device_Logicals_________________  H               Logical_Name____________________Transport_________________  4               NETBIOS$DEVICE                  DECnet  4               PWRK$KNBDAEMON_DEVICE           TCP/IP  H                                                 (continued on next page)  6         3-16 Configuring the PATHWORKS Advanced Server           H                                Configuring the PATHWORKS Advanced ServerH               3.7 Selecting the PATHWORKS Advanced Server Network Device  H               Table_3-3_(Cont.)_OpenVMS_Network_Device_Logicals_________  H               Logical_Name____________________Transport_________________  H               PWRK$NETBEUI_DEVICE_____________NetBEUI___________________                 For example:  G               o  To select device EWA0: for DECnet transport, enter the ?                  following command before you start the server:a  5                  $ DEFINE/SYSTEM NETBIOS$DEVICE EWA0:   G               o  To select device ESA0: for the TCP/IP transport, enterrC                  the following command before you start the server:n  <                  $ DEFINE/SYSTEM PWRK$KNBDAEMON_DEVICE ESA0:  H               o  To select device ESA1: for the NetBEUI transport, enterC                  the following command before you start the server:o  ;                  $ DEFINE/SYSTEM PWRK$NBDAEMON_DEVICE ESA1:   F                 ________________________Note  ________________________  A                 If TCP/IP is running on multiple network devices, B                 and you select one of those devices for use by theC                 PATHWORKS Advanced Server, make sure the device youPD                 select corresponds to the first device listed in the,                 TCP/IP local hosts database.  E                 _____________________________________________________   +         3.8 Defining Communications Devices   B               This section describes how to add new communicationsB               devices that are not automatically recognized by theD               PATHWORKS Advanced Server, as well as restrictions and4               limitations on communications devices.  F               The PWRK$KNBDAEMON, NETBIOS, and PWRK$NBDAEMON processesC               require the communications device to be defined in an C               internal device table. New communications devices can B               be released before updated PATHWORKS Advanced ServerH               images are available to customers. Therefore, this sectionH               describes how to define the communications device you want3               the PATHWORKS Advanced Server to use.   H                           Configuring the PATHWORKS Advanced Server 3-17           1         Configuring the PATHWORKS Advanced Server +         3.8 Defining Communications Devicess  ?               If the communications device is not recognized byeG               PATHWORKS Advanced Server, each failing process writes anfH               error message to its log file. Table 3-4, Undefined DeviceD               Messages shows each process, the log file that recordsE               the error message from the process, and examples of theeG               text of the error message. In the following examples, the )               server node name is MYNODE.     H         Table_3-4_Undefined_Device_Messages_____________________________  H         Process__________Log_File_Name__________________________________  <         PWRK$KNBDAEMON   PWRK$LOGS:PWRK$KNBDAEMON_MYNODE.LOG           Message:  F         Tue Mar 24 13:13:50 1998 get_phys_addr: Failed to get EthernetH         device_characteristics__________________________________________  ;         PWRK$NBDAEMON    PWRK$LOGS:PWRK$NBDAEMON_MYNODE.LOGc           Message:  H         Tue_Mar_24_13:13:50_1998_Failed_to_open_datalink________________  5         NETBIOS          PWRK$LOGS:NETBIOS_MYNODE.LOGf           Message:  D         %NB-W-ERRSIGNAL, exceptional conditional detected at 24-Mar-         1998 13:13:50.00H         -SYSTEM-W-NOSUCHDEV,_no_such_device_available___________________  @               The device tables include all known communicationsE               devices. However, if you are running the latest release G               and you find any of the messages listed in Table 3-4, you F               can explicitly specify the communications device for all=               three processes, using the following procedure:r  ?               1. Define the physical communications device type_C                  for the PWRK$KNBDAEMON, NETBIOS, and PWRK$NBDAEMONiH                  processes. For example, if EWA0 was an unknown physical@                  communications device type, you would enter the$                  following commands:  <                  $ DEFINE/SYSTEM PWRK$KNBDAEMON_DEVICE EWA0:5                  $ DEFINE/SYSTEM NETBIOS$DEVICE EWA0:i:                  $ DEFINE/SYSTEM PWRK$NETBEUI_DEVICE EWA0:  6         3-18 Configuring the PATHWORKS Advanced Server           H                                Configuring the PATHWORKS Advanced ServerH                                      3.8 Defining Communications Devices  $               2. Restart the server:  ,                  $ @SYS$STARTUP:PWRK$STARTUP           3.9 Next Steps  G               You can start the PATHWORKS Advanced Server automatically 5               as part of the configuration procedure.   C               o  If you are upgrading from PATHWORKS V5 for OpenVMS G                  (LAN Manager) perform the upgrade procedures described F                  in the PATHWORKS for OpenVMS (Advanced Server) Server!                  Migration Guide.   E               o  If you are ready to start the server, see Chapter 5, E                  After You Install the PATHWORKS Advanced Server, for                   instructions.                                                        H                           Configuring the PATHWORKS Advanced Server 3-19                       H                                                                        4H         ________________________________________________________________  H                   Configuring and Starting the Standalone License Server      G               The license server is a software program that you can runt@               on an OpenVMS system to grant licenses to clients.  C               This chapter describes how to configure and start thenF               standalone license server, and consists of the following               sections:   6               o  Section 4.1, About the License Server  ?               o  Section 4.2, Before You Begin to Configure then*                  Standalone License Server  G               o  Section 4.3, Configuring the Standalone License Serverl  8               o  Section 4.4, Configuring the Transports  E               o  Section 4.5, How to Respond to Configuration Promptsl  H               o  Section 4.6, How to Start the Standalone License Server  $         4.1 About the License Server  1               You can install the license server:s  >               o  Separately from the PATHWORKS Advanced Server  B               o  In conjunction with the PATHWORKS Advanced Server  H               Compaq recommends that you install the license server on aF               designated OpenVMS system without the PATHWORKS AdvancedF               Server, to ensure smooth and continuous operation of theF               license server. Therefore, the PATHWORKS Advanced ServerE               kit allows you to install the standalone license server E               separately from the file server. Alternatively, you canrC               run the license server on an OpenVMS cluster with thetH               PATHWORKS Advanced Server, where cluster failover provides               reliability.  H               Configuring and Starting the Standalone License Server 4-1 u  n      >         Configuring and Starting the Standalone License Server$         4.1 About the License Server  F                 ________________________Note  ________________________  ?                 The license server is required for client-basedgA                 licensing. For server-based licensing, you do noth/                 have to run the license server.   E                 _____________________________________________________   G               Each LAN needs only one license server to support client-S@               based licenses. The same license server can manageF               licenses for client access to any of the following types               of file servers:  7               o  PATHWORKS V5 for OpenVMS (LAN Manager)O  ;               o  PATHWORKS V6 for OpenVMS (Advanced Server)   1               o  Advanced Server V7.2 for OpenVMSh  F                 ________________________Note  ________________________  C                 The license server included with PATHWORKS Advancedo=                 Server will not issue or manage PATHWORKS for_?                 OpenVMS (NetWare) licenses. If you have clients_;                 using NetWare networking software, maintaine=                 the existing version of the license server on ?                 a different system from the one that is running *                 PATHWORKS Advanced Server.  E                 _____________________________________________________T  C               In an OpenVMS cluster, the PAKs must be loaded into a B               shared license database. For detailed information onD               managing licenses, see the Advanced Server for OpenVMS9               Guide to Managing Advanced Server Licenses.f  G         4.2 Before You Begin to Configure the Standalone License Servere  E               You install the standalone license server from the same @               software kit that you use to install the PATHWORKS>               Advanced Server. The procedures are described inB               Chapter 2, Installing the PATHWORKS Advanced Server.      B         4-2 Configuring and Starting the Standalone License Server           H                   Configuring and Starting the Standalone License ServerH                            4.3 Configuring the Standalone License Server  5         4.3 Configuring the Standalone License Server   A               You must configure the standalone license server to D               provide licenses to clients in the LAN. Therefore, youD               select the appropriate transports used by the clients.G               You can configure the license server to use the followingh               transports:                                                                             H               Configuring and Starting the Standalone License Server 4-3           >         Configuring and Starting the Standalone License Server5         4.3 Configuring the Standalone License Serverl                 o  DECnetn                 o  NetBEUI                 o  TCP/IP   &         4.4 Configuring the Transports  G               The following section describes how to use the configura- H               tion command procedure to configure the transports for the(               standalone license server.  E               After the installation procedure completes, the OpenVMSc?               system prompt ($) is displayed. If the system wasA.               rebooted following installation:  E               1. Ensure that you are logged in to the SYSTEM account.   ?               2. Start the configuration procedure by entering:a  *                  $ @SYS$UPDATE:PWRK$CONFIG  6               3. Respond to the configuration prompts.  3         4.5 How to Respond to Configuration Promptse  @               Table 4-1, Standalone License Server ConfigurationH               Prompts, tells you how to respond to the prompts displayedF               by PWRK$CONFIG when you configure the standalone license               server.   F                 ________________________Note  ________________________  A                 Table 4-1 shows only the prompts that PWRK$CONFIGi<                 displays; it does not show any informational=                 messages. For a complete sample configurationKA                 script, see Appendix C, Sample Standalone Licensep@                 Server Installation and Configuration Procedure.  E                 _____________________________________________________>          B         4-4 Configuring and Starting the Standalone License Server g  d      H                   Configuring and Starting the Standalone License ServerH                              4.5 How to Respond to Configuration Prompts  H         Table_4-1_Standalone_License_Server_Configuration_Prompts_______  5         At this            If you want the configura- H         prompt_._._._______tion_procedure_to_._._.______Enter_._._._____  @         Enter disk device  Copy the server on-disk      <Return>3         name where         structure to the default .         the Advanced       OpenVMS disk device$         Server data files  displayed2         will be stored     (If you ran PWRK$CONFIG2         [default_device]:  previously, the default  5                            disk device is the one you_6                            specified the last time you2                            configured the server.)  C                            Copy the PATHWORKS Advanced  device_namen3                            Server on-disk structure 4                            to an OpenVMS disk device5                            different from the defaulto$                            displayed  @         Do you want to     Allow licenses to be served  <Return>&         serve PATHWORKS    over DECnet         licenses overn         DECnet [YES]:[1]  :                            Not allow licenses to be     NO-                            served over DECnet   ;         Do you want to     Allow licenses to be served  YESr'         serve PATHWORKS    over NetBEUI          licenses overe         NetBEUI [NO]:[1]  @                            Not allow licenses to be     <Return>.                            served over NetBEUI  H         [1]Default_answers_may_differ_if_you_ran_the_PWRK$CONFIG________           procedure previously.   H                                                 (continued on next page)    H               Configuring and Starting the Standalone License Server 4-5 k  u      >         Configuring and Starting the Standalone License Server3         4.5 How to Respond to Configuration Promptsn  A         Table 4-1 (Cont.) Standalone License Server Configuration H         __________________Prompts_______________________________________  5         At this            If you want the configura- H         prompt_._._._______tion_procedure_to_._._.______Enter_._._._____  ;         Do you want to     Allow licenses to be served  YES &         serve PATHWORKS    over TCP/IP         licenses overt         TCP/IP [NO]:[1]e  @                            Not allow licenses to be     <Return>-                            served over TCP/IP   @         Do you want        Start the server au-         <Return>0         to start the       tomatically after the2         PATHWORKS license  configuration procedure$         server now [YES]:  completes  :                            Complete the configuration   NO5                            procedure without startinge%                            the servereH         [1]Default_answers_may_differ_if_you_ran_the_PWRK$CONFIG________           procedure previously.nH         ________________________________________________________________  6         4.6 How to Start the Standalone License Server  F               You can start the license server in any of the following               ways:t  D               o  During the configuration procedure, as described inH                  Section 4.3, Configuring the Standalone License Server.  0               o  Manually from the command line.  4               o  Automatically each time you reboot.              B         4-6 Configuring and Starting the Standalone License Server           H                   Configuring and Starting the Standalone License ServerH                           4.6 How to Start the Standalone License Server  6         4.6.1 How to Start the License Server Manually  @               If you did not start the license server during theF               configuration procedure, you can start it manually using$               the following command:  )               $ @SYS$STARTUP:PWRK$STARTUPC  B               The license server will use DECnet, NetBEUI, TCP/IP.B               Process NETBIOS created with identification 0000011EH               Process PWRK$NBDAEMON created with identification 00000120I               Process PWRK$KNBDAEMON created with identification 00000122aI               Process PWRK$LICENSE_S created with identification 00000124r               $_  ;         4.6.2 How to Start the License Server Automaticallyp  G               To make sure that the license server starts automaticallyU5               each time you boot your OpenVMS system:   E               1. Edit the system startup file (SYS$STARTUP:SYSTARTUP_                   VMS.COM).  C               2. Add the startup command, as shown in the followingNE                  example. Add the command to the file below all lines E                  that start network transports. The following example ,                  shows how to edit the file.  R         $ IF F$SEARCH("SYS$SYSTEM:NETACP.EXE") .NES. "" THEN @SYS$MANAGER:STARTNET	         .U	         .,	         .   #         $ @SYS$STARTUP:PWRK$STARTUPr  C         4.6.3 How to Start the License Server in an OpenVMS ClusterM  C               If you installed and configured the license server on_B               multiple members of the same OpenVMS cluster, CompaqC               suggests that you use the SYSMAN utility to start theiH               server manually and simultaneously on all cluster members.               To do so:   G               1. Make sure that you are logged in to the SYSTEM account C                  on one of the server nodes in the OpenVMS cluster._  6               2. Start the SYSMAN utility by entering:  (                  $ RUN SYS$SYSTEM:SYSMAN  H               Configuring and Starting the Standalone License Server 4-7 e  t      >         Configuring and Starting the Standalone License Server6         4.6 How to Start the Standalone License Server  D               3. Define all the cluster members on which you want toE                  start the standalone license server. For example, ifoF                  you want to start the license server on nodes HYDRAA,$                  HYDRAB, and HYDRAC:  D                  SYSMAN> SET ENVIRONMENT/NODE=(HYDRAA,HYDRAB,HYDRAC)  F               4. Start the license server on the nodes you defined. AtA                  the SYSMAN> prompt, enter the following command:   4                  SYSMAN>DO @SYS$STARTUP:PWRK$STARTUP                                                                    B         4-8 Configuring and Starting the Standalone License Server    .                  H                                                                        5H         ________________________________________________________________  H                          After You Install the PATHWORKS Advanced Server      D               This chapter describes tasks you can perform after you=               install the PATHWORKS Advanced Server software.l  >               This chapter consists of the following sections:  F               o  Section 5.1, Before You Begin Post-installation Tasks  A               o  Section 5.2, Verifying the PATHWORKS for OpenVMS /                  (Advanced Server) Installation_  D               o  Section 5.3, Starting the PATHWORKS Advanced Server  D               o  Section 5.4, Stopping the PATHWORKS Advanced Server  @               o  Section 5.5, Setting Up External Authentication  G               o  Section 5.6, Installing Optional Server Administration$                  Tools  4         5.1 Before You Begin Post-installation Tasks  D               Make sure you have completed all the required steps inA               Table 5-1, Have You Done . . . , before proceeding.-                        H                      After You Install the PATHWORKS Advanced Server 5-1 -  U      7         After You Install the PATHWORKS Advanced Server 4         5.1 Before You Begin Post-installation Tasks  H               Table_5-1_Have_You_Done_._._._____________________________  H               If_you_are_._._.______Make_sure_that_you_have_._._._______                 Installing theA               PATHWORKS Advanced    1. Completed the installationuH               Server                   procedure described in Chapter 2,  H                                        Installing the PATHWORKS Advanced.                                        Server.  B                                     2. Completed the configurationH                                        procedure described in Chapter 3,@                                        Configuring the PATHWORKS7                                        Advanced Server.i                 Upgrading aYA               PATHWORKS V5          1. Completed the installationW>               for OpenVMS (LAN         procedures described in@               Manager) server to       Chapter 2, Installing theA               PATHWORKS V6 for         PATHWORKS Advanced Server.                OpenVMS (Advanced F               Server) server        2. Completed the upgrade procedureE                                        described in the PATHWORKS for G                                        OpenVMS (Advanced Server) ServerI7                                        Migration Guide.   B                                     3. Completed the configurationH                                        procedure described in Chapter 3,@                                        Configuring the PATHWORKS7                                        Advanced Server.A                 Installing theA               Standalone License    1. Completed the installation >               Server                   procedures described in  @                                        Chapter 2, Installing theA                                        PATHWORKS Advanced Server.   F                                     2. Completed the configuration andC                                        startup procedures describeddD                                        in Chapter 4, Configuring andF                                        Starting the Standalone License.                                        Server.  !               Installing external H               authentication        Completed the installation procedureF               software only         described in Chapter 2, Installing  H               ______________________the_PATHWORKS_Advanced_Server.______;         5-2 After You Install the PATHWORKS Advanced Server            H                          After You Install the PATHWORKS Advanced ServerH   5.2 Verifying the PATHWORKS for OpenVMS (Advanced Server) Installation  A         5.2 Verifying the PATHWORKS for OpenVMS (Advanced Server)n             Installation  D               If you did not run the IVP as part of the installationB               procedure, as described in Chapter 2, Installing theC               PATHWORKS Advanced Server, you can run it now to makej:               sure that the server installed successfully.  B               To run the IVP for PATHWORKS Advanced Server, enter:  "               $ @SYS$TEST:PWRK$IVP  H         ________________________________________________________________         If theJ         instal-                                       And you should . . .H         lation_._._.__Then_the_IVP_displays_._._._______________________  ?         Succeeded     The message %PWRK-I-NORMAL, IVP completedr"                       successfully  G                                                       Start the server,,E                                                       as described in D                                                       Section 5.3.4,G                                                       Starting the File =                                                       Server._  H         Failed        An error message, followed by -PWRK-E-IVPFAIL, IVP                        has failed  C                                                       Reinstall thehB                                                       software, asB                                                       described in@                                                       Chapter 2,D                                                       Installing theH                                                       PATHWORKS AdvancedH         ______________________________________________Server.___________  2         5.3 Starting the PATHWORKS Advanced Server  G               The following sections describe when and how to start the (               PATHWORKS Advanced Server.        H                      After You Install the PATHWORKS Advanced Server 5-3 T  R      7         After You Install the PATHWORKS Advanced ServerA2         5.3 Starting the PATHWORKS Advanced Server  9         5.3.1 When to Start the PATHWORKS Advanced Serverw  G               You must configure the server before you can start it foreH               the first time. After running the configuration procedure,<               you can start and stop the server at any time.  -         5.3.2 What the Startup Procedure Does_  $               The startup procedure:  4               1. Checks for the required privileges.  ?               2. Verifies that required configuration files are                   available.e  G               3. Verifies that the server has been configured, and endse                  if it has not.e  )               4. Loads transport drivers.e  !               5. Installs images.   4               6. Starts transport support processes.  /               7. Starts each of the components:R  %                  o  License Registraro  2                  o  License server (if configured)                    o  File servere  )         5.3.3 Troubleshooting the Startupg  >               PATHWORKS Advanced Server processes are detachedD               processes. During startup, all detached processes mustB               execute the site-specific system login procedure (by0               default, SYS$MANAGER:SYLOGIN.COM).  H               If the PATHWORKS Advanced Server startup does not completeF               successfully, check the SYLOGIN.COM procedure. Make sureD               that only commands that should be executed by detachedB               processes are executed during the PATHWORKS Advanced               Server startup.   C               In SYSLOGIN.COM, you can use the DCL lexical function E               F$MODE or F$GETJPI to conditionalize DCL commands, such C               as $SET TERM/INQUIRE, that should be executed only byeB               nondetached processes, so that they are not executedC               during the PATHWORKS Advanced Server startup. See theT:               OpenVMS DCL Dictionary for more information.  ;         5-4 After You Install the PATHWORKS Advanced Server            H                          After You Install the PATHWORKS Advanced ServerH                               5.3 Starting the PATHWORKS Advanced Server  &         5.3.4 Starting the File Server  ,               You can start the file server:  D               o  During the configuration procedure, as described inF                  Chapter 3, Configuring the PATHWORKS Advanced Server.  0               o  Manually from the command line.  4               o  Automatically each time you reboot.  A         5.3.5 How to Start the PATHWORKS Advanced Server ManuallyR  G               If you did not start the PATHWORKS Advanced Server duringeB               the configuration procedure, you can start it now by               entering:l  )               $ @SYS$STARTUP:PWRK$STARTUPo  H               The PATHWORKS Advanced Server starts, and messages similar-               to the following are displayed:_  <               PATHWORKS file server will use DECnet, TCP/IP.:               PATHWORKS mail notification will use DECnet.B               Process NETBIOS created with identification 0000009AI               Process PWRK$LICENSE_R created with identification 0000009DpP               The PATHWORKS V6.0B server is configured to support 20 PC clients.F               Process PWRK$MASTER created with identification 000000A2N               The master process will now start all other PATHWORKS processes.  G         5.3.6 How to Define PATHWORKS Advanced Server Commands When You                Log In  G               You can define server commands automatically when you logaE               in to the privileged account that you use to manage the (               PATHWORKS Advanced Server.  D               To define server commands at login, edit the LOGIN.COMG               file of the privileged account to add the following line:a  1               $ @SYS$STARTUP:PWRK$DEFINE_COMMANDSh        H                      After You Install the PATHWORKS Advanced Server 5-5 i  b      7         After You Install the PATHWORKS Advanced Server 2         5.3 Starting the PATHWORKS Advanced Server  F         5.3.7 How to Start the PATHWORKS Advanced Server Automatically  D               To make sure that the server starts automatically each0               time you boot your OpenVMS system:  M               1. Edit the system startup file, SYS$STARTUP:SYSTARTUP_VMS.COM.   F               2. Add the @SYS$STARTUP:PWRK$STARTUP command to the fileC                  below all lines that start network transports. For                   example:l  R         $ IF F$SEARCH("SYS$SYSTEM:NETACP.EXE") .NES. "" THEN @SYS$MANAGER:STARTNET  	         . 	         .[	         .   #         $ @SYS$STARTUP:PWRK$STARTUPc  F         5.3.8 How to Start the PATHWORKS Advanced Server in an OpenVMS               ClusterA  D               If you installed and configured the PATHWORKS AdvancedE               Server on multiple members of the same OpenVMS cluster, A               Compaq Computer Corporation recommends that you use A               the SYSMAN utility to start the server manually ande4               simultaneously on all cluster members.  B               To start the servers at the same time, make sure youF               are logged in to the SYSTEM account on one of the server0               nodes, then run SYSMAN as follows:  H         ________________________________________________________________H         Enter_this_command...___________To...___________________________  A         $ RUN SYS$SYSTEM:SYSMAN         Start the SYSMAN utility._           SYSMAN> SET ENVIRONMENT           /NODE=(SPEEDY,SPIN,SPAN)  B                                         Define the OpenVMS clusterA                                         members on which to startnE                                         the server. (In this example, @                                         SPEEDY, SPIN, and SPAN.)  D         SYSMAN> DO @SYS$STARTUP:PWRK$STARTUPt the PATHWORKS AdvancedC                                         Server on all the nodes you H                                         defined in the previous command.  ;         5-6 After You Install the PATHWORKS Advanced Serverw E         H                          After You Install the PATHWORKS Advanced ServerH                               5.3 Starting the PATHWORKS Advanced Server  H         ________________________________________________________________H         Enter_this_command...___________To...___________________________  H         SYSMAN>_EXIT____________________Exit_the_SYSMAN_utility.________  F                 ________________________Note  ________________________  C                  If you are using the STARTUP feature of the SYSMANDC                 utility to start the PATHWORKS Advanced Server, youS=                 must pass a P1 parameter of " ". For example,   I                 SYSMAN STARTUP ADD FILE PWRK$STARTUP.COM/PARAMETER=P1:" "e  B                 For more information on using the SYSMAN utility'sB                 STARTUP feature, see the OpenVMS System Management+                 Utilities Reference Manual.   E                 _____________________________________________________   2         5.4 Stopping the PATHWORKS Advanced Server  G               The following sections describe when and how you stop thet(               PATHWORKS Advanced Server.  8         5.4.1 When to Stop the PATHWORKS Advanced Server  G               You can stop the server at any time for any reason, whichh(               can include the following:  2               o  When you change server parameters  6               o  As part of an orderly system shutdown  :               o  As needed to troubleshoot server problems  7         5.4.2 How to Stop the PATHWORKS Advanced Server   >               To stop the server, enter the following command:  *               $ @SYS$STARTUP:PWRK$SHUTDOWN  A         5.4.3 How to Stop the PATHWORKS Advanced Server on Systemt               Shutdown  G               To stop the server as part of an orderly system shutdown, B               add the shutdown command to the site-specific system!               shutdown procedure.   H                      After You Install the PATHWORKS Advanced Server 5-7           7         After You Install the PATHWORKS Advanced Server .         5.5 Setting Up External Authentication  .         5.5 Setting Up External Authentication  B               The OpenVMS operating system Versions 7.1 and higherD               provide support for external authentication. PATHWORKSG               Advanced Server participates with the operating system tocE               provide external authentication, which allows PATHWORKSdF               Advanced Server users to log in to the OpenVMS operatingF               system using the PATHWORKS Advanced Server user name and               password.h  A               External authentication provides automatic passwordeE               synchronization between an OpenVMS account and a corre- G               sponding Windows NT account. With external authenticatione@               enabled, users who have both OpenVMS and PATHWORKSH               Advanced Server user accounts can avoid having to maintain&               two different passwords.  G               To provide external authentication on the system, performi'               the following procedures.   H               __________________________________________________________H               Step___Procedure_____________Refer_to_._._._______________  D               1.     Install one of the    Chapter 2, Installing theD                      following:            PATHWORKS Advanced Server  %                      o  The PATHWORKSE'                         Advanced Server   !                      o  PATHWORKSr                          External&                         Authentication#                         images only   D               2.     Copy the external     Section 5.5.1, Setting UpE                      authentication files  External Authentication int;                      to the system.        OpenVMS Clusters                 ;         5-8 After You Install the PATHWORKS Advanced Server     _      H                          After You Install the PATHWORKS Advanced ServerH                                   5.5 Setting Up External Authentication  H               __________________________________________________________H               Step___Procedure_____________Refer_to_._._._______________  B               3.     Enable external       The appropriate OpenVMS?                      authentication for    document, one of theS5                      the system.           following:   F                                            o  For OpenVMS Version 7.1:G                                               OpenVMS V7.1 New Features 4                                               Manual  F                                            o  For OpenVMS Version 7.2:C                                               OpenVMS V7.2 Guide to =                                               System Securitys  B               4.     Set the OpenVMS       The appropriate OpenVMS?                      user account to       document, one of thei5                      allow external        following:rF                      authentication.       o  For OpenVMS Version 7.1:  G                                               OpenVMS V7.1 New Featuresn4                                               Manual  F                                            o  For OpenVMS Version 7.2:C                                               OpenVMS V7.2 Guide tot=                                               System Securitye  @               5.     Establish host        PATHWORKS for OpenVMSC                      mapping between the   (Advanced Server) Serverl@                      PATHWORKS Advanced    Administrator's Guide(                      Server user account$                      and the OpenVMS%                      user account, ifpH               _______necessary._________________________________________  D         5.5.1 Setting Up External Authentication in OpenVMS Clusters  H               If you are running PATHWORKS Advanced Server in an OpenVMSC               cluster, and you have enabled external authentication D               for PATHWORKS Advanced Server users, you should set upC               external authentication on all the member nodes in anRB               OpenVMS cluster. If any nodes in the cluster are notC               running the PATHWORKS Advanced Server, you follow the D               procedure described in this section to set up externalH               authentication on nodes that are not running the PATHWORKS               Advanced Server.  H                      After You Install the PATHWORKS Advanced Server 5-9 u  i      7         After You Install the PATHWORKS Advanced Serveri.         5.5 Setting Up External Authentication  A               1. Install PATHWORKS External Authentication images A                  from the PATHWORKS for OpenVMS (Advanced Server)tD                  software kit, as described in Chapter 2, InstallingG                  the PATHWORKS Advanced Server, on the member node that >                  is not running the PATHWORKS Advanced Server.  C               2. Enable external authentication on the member node.   ?               3. Enable external authentication for host-mapped 1                  PATHWORKS Advanced Server users.   E               For information about enabling external authentication, 6               refer to the appropriate OpenVMS manual:  G               o  For OpenVMS Version 7.1, refer to the OpenVMS V7.1 Newt!                  Features Manual.h  C               o  For OpenVMS Version 7.2, refer to the OpenVMS V7.2o*                  Guide to System Security.  =         5.5.2 Enabling External Authentication over a Networkd  ?               External authentication cannot occur if a networkdF               connection is required and the network is down. However,F               privileged users can enter the /LOCAL_PASSWORD qualifierA               after the OpenVMS user name at the login prompt, toO>               specify local authentication. Be sure to specify?               the OpenVMS user name and password when using thei(               /LOCAL_PASSWORD qualifier.  E               Because using the /LOCAL_PASSWORD qualifier effectivelyu>               overrides the security policy established by theD               system manager, it is allowed only under the following               conditions:   D               o  When the user's account has SYSPRV as an authorizedB                  privilege. This allows the system manager to gain?                  access to the system when the network is down.   C               o  When Bit 1 is set in the SYS$SINGLE_SIGNON logical H                  name, which allows nonprivileged users who are normally<                  externally authenticated to log in locally.  H               Refer to the OpenVMS System Management Utilities ReferenceC               Manual for more information about the /LOCAL_PASSWORD -               qualifier to the LOGIN command.   <         5-10 After You Install the PATHWORKS Advanced Server           H                          After You Install the PATHWORKS Advanced ServerH                                   5.5 Setting Up External Authentication  E         5.5.3 Configuring Externally Authenticated Client Connectionsl  @               By default, the PATHWORKS Advanced Server supports>               the processing of up to 10 simultaneous externalB               authentication requests. You can modify this maximumE               to suit the server requirements using the ConfigurationiD               Manager. To start the Configuration Manager, enter the                following command:  (               $ ADMINISTER/CONFIGURATION  ?               The basic server parameters include the number of >               simultaneous activations for users with external<               authentication (also called "Single Sign-on").  @               For more information about using the ConfigurationC               Manager, refer to the PATHWORKS for OpenVMS (AdvancedA3               Server) Server Administrator's Guide.   ;         5.6 Installing Optional Server Administration Tools   E               The PATHWORKS Advanced Server provides optional client- A               based server administration tools that allow you todD               manage the server from Windows 95, Windows 98, Windows@               for Workgroups, or Windows NT clients. These toolsA               are available in the PWUTIL share after installing,i2               configuring and starting the server.  C               The SRVTOOLS directory in the PWUTIL share contains a E               subdirectory for each type of client computer. Refer to E               the README.TXT file in the appropriate subdirectory for C               instructions on installing the software on the client                computer.   H               Refer to the Windows NT Server documentation or use onlineC               Help for more information about how to use Windows NT *               Server administration tools.                H                     After You Install the PATHWORKS Advanced Server 5-11 a  d                  H                                                                        6H         ________________________________________________________________  H                                         Implementing a Wide Area Network      F               This chapter describes how to set up a wide area networkG               (WAN) using one of the TCP/IP transport software productsd5               supported by PATHWORKS Advanced Server.n  >               This chapter consists of the following sections:  ;               o  Section 6.1, Enabling Wide Area Networking   B               o  Section 6.2, Using the LMHOSTS File for Wide Area                  NetworkingI  ?               o  Section 6.3, Using WINS in a Wide Area Network   )         6.1 Enabling Wide Area Networking   D               The PATHWORKS Advanced Server allows you to use one orD               both of the following methods for wide area networking               name resolution:  (               o  LMHOSTS file for TCP/IP  5               o  Windows Internet Name Servers (WINS)r  B               In order to use them, they must be enabled using theD               Configuration Manager. You can enable them through theF               PWRK$CONFIG.COM command procedure, which provides accessE               to the Configuration Manager when you answer YES to theAB               question "Do you want to change server configurationA               parameters." To enable one or both of the wide area B               networking methods, select the Transports screen andF               select the appropriate checkbox. (Refer to the PATHWORKSH               for OpenVMS (Advanced Server) Server Administrator's GuideE               for information about using the Configuration Manager.)     H                                     Implementing a Wide Area Network 6-1           (         Implementing a Wide Area Network;         6.2 Using the LMHOSTS File for Wide Area Networking   ;         6.2 Using the LMHOSTS File for Wide Area Networking   A               The PATHWORKS Advanced Server software provides therC               ability to set up a wide area network with the TCP/IP F               transport through the use of the LMHOSTS file. This fileF               contains a list of domain controllers and member serversC               that are not in the same TCP/IP subnet as the primaryrF               domain controller. The LMHOSTS file allows the PATHWORKSF               Advanced Server to participate in a Windows NT wide area               network as well.  H               Unlike a Windows NT Server, PATHWORKS Advanced Server doesG               not support remote LMHOSTS files (called into the WindowseG               NT LMHOSTS file using #INCLUDE). To include the same hostvG               names as an existing LMHOSTS file on a Windows NT Server,PE               copy the LMHOSTS file to the PATHWORKS Advanced Server,tA               then manually insert the entries into the PATHWORKSn+               Advanced Server LMHOSTS file.   3         6.2.1 Setting up a TCP/IP Wide Area Network.  F               To set up a TCP/IP wide area network, modify the LMHOSTSF               file, which consists of a list of the host names and TCPH               /IP addresses of the domain controllers and member serversC               in the wide area network that are in the same domain.t  F               When you include a node in the LMHOSTS file, the primaryE               domain controller copies the user account database ontolH               that node and keeps it up to date. If you omit a node, its;               user account database may become out of date.   B               You can modify the LMHOSTS file at any time. As longD               as the LMHOSTS file exists, users can establish TCP/IP;               connections to any server listed in the file.   .         6.2.2 Enabling LMHOSTS Name Resolution  G               To use LMHOSTS for name resolution, it must be enabled inaE               the server configuration. Use the Configuration Managerl@               when you run the PWRK$CONFIG initial configurationC               procedure, or run the Configuration Manager later, as B               described in PATHWORKS for OpenVMS (Advanced Server)+               Server Administrator's Guide.w    ,         6-2 Implementing a Wide Area Network _  _      H                                         Implementing a Wide Area NetworkH                      6.2 Using the LMHOSTS File for Wide Area Networking  #         6.2.3 The LMHOSTS DirectoryO  G               You set up a wide area network by supplying the following @               file on all PATHWORKS Advanced Servers that are in                different subnets:  *               PWRK$LMROOT:[LANMAN]LMHOSTS.  5               The LMHOSTS file has no file extension.   !         6.2.4 LMHOSTS File Syntax   G               In the LMHOSTS file, create a list of nodes by specifying /               the following line for each node:   4               address nodename #PRE #DOM:domain_name                 Where:  H               o  address is an Internet address of form x.x.x.x, where x3                  is a decimal number from 0 to 255.l  A               o  nodename is a name from 1 to 16 characters long,rD                  and may include a control character. (The format ofB                  a control character is \0Xnn or \nn, where n is a$                  hexadecimal digit.)  D                  To preserve the case of the characters, enclose theF                  node name in double quotation marks. If the node nameC                  is not enclosed in quotation marks, the alphabeticrH                  characters are set to uppercase before the node name isF                  loaded into cache (see parameter #PRE, below) or used                  for matching.  A                  If the node name includes a control character in C                  the last byte, you should include blank charactersTC                  to explicitly control the placement of the controll@                  character. When the node name has fewer than 16D                  characters, it is padded with blank characters. TheA                  following are some examples of valid node names:h                    1. hydra1  !                  2. "hydra1\0X03"   *                  3. "hydra1         \0X03"  H                  In Example 1, the node name is interpreted as uppercaseC                  (HYDRA1) and will be padded with blank characters.   H                                     Implementing a Wide Area Network 6-3 y  s      (         Implementing a Wide Area Network;         6.2 Using the LMHOSTS File for Wide Area NetworkingA  B                  In Example 2, the node name is not interpreted asD                  uppercase, and will be padded with blank characters(                  for bytes 8 through 16.  B                  In Example 3, the node name is not interpreted asG                  uppercase, and no padding needs to be inserted because G                  blank spaces are already included, to make the controlp-                  character reside in byte 16.s  F               o  #PRE is an optional tag that indicates that the entry4                  should be preloaded into the cache.  D               o  #DOM:domain-name is an optional tag that associatesB                  the entry with the Windows NT domain specified byG                  domain-name. It is required when the entry is a domainTC                  controller. This affects how the logon and browser H                  services behave in routed environments. It is also usedG                  in user account management and in trust relationships.e  G               For example, the following entry might be included in thea               LMHOSTS file:   4               12.13.14.15 SERVER #PRE #DOM:VMSDOMAIN  E               This entry results in NetBIOS name SERVER with InternetdF               address 12.13.14.15 being preloaded into the cache. BothD               the NetBIOS name SERVER and the NetBIOS name VMSDOMAINF               (the name of the domain) will be available for matching.  '         6.2.5 Managing the LMHOSTS Files  E               To change the list of available nodes, you can edit the E               file at any time. Domain names are resolved by checking_+               the LMHOSTS file dynamically._  D               To disable LMHOSTS name resolution, rename the LMHOSTS2               file to any name other than LMHOSTS.  D               When you modify or disable the LMHOSTS file, it is notE               necessary to restart the PATHWORKS Advanced Server. The F               change is effective immediately and is referenced at the               next lookup.      ,         6-4 Implementing a Wide Area Network           H                                         Implementing a Wide Area NetworkH                      6.2 Using the LMHOSTS File for Wide Area Networking  (         6.2.6 Using the LMHOSTS Log File  D               If errors occur when the LMHOSTS file is accessed, the8               errors are recorded in the following file:  ;               PWRK$LMROOT:[LOGS]PWRK$KNBDAEMON_nodename.LOGn  H               This file is open and being written to while the PATHWORKSD               Advanced Server is running. To close the log file, you6               must stop the PATHWORKS Advanced Server.  C               To prevent the log file from becoming too large, eachlH               error is logged only once: the first time it occurs. If anE               error is found in the log file, it is not logged again.o  -         6.3 Using WINS in a Wide Area Network   G               You can configure the PATHWORKS Advanced Server as a WINS F               client. This allows the PATHWORKS Advanced Server to useF               WINS for NETBIOS name registration, resolution, renewal,?               and release in a wide area network configuration.M  B               For more information on how to use the ConfigurationC               Manager to configure the PATHWORKS Advanced Server toaD               use WINS, refer to the PATHWORKS for OpenVMS (Advanced3               Server) Server Administrator's Guide.l  :         6.3.1 Setting up WINS Support for OpenVMS Clusters  C               To allow clients that are configured for WINS supportnE               to use a PATHWORKS alias name to connect to a clusteredaB               PATHWORKS Advanced Server across a WAN, you must addD               to the WINS database a static multihomed entry for theE               PATHWORKS alias name. The following is an example of ant>               entry for the PATHWORKS alias name alpha1_alias:                 alpha1_alias               16.20.240.24  G               When adding the static multihomed entry for the PATHWORKSrE               alias name, you should enter the TCP/IP address of each C               node in the OpenVMS cluster that is running PATHWORKS                Advanced Server.  F                 ________________________Note  ________________________  ?                 The TCP/IP address that you place at the top ofWC                 the list in the WINS database should be that of thev  H                                     Implementing a Wide Area Network 6-5    r      (         Implementing a Wide Area Network-         6.3 Using WINS in a Wide Area Network   D                 first node that will start PATHWORKS Advanced Server                 in the cluster.c  E                 _____________________________________________________t  E               For more information about adding static entries to thetF               WINS database, refer to your WINS product documentation.                                                                            ,         6-6 Implementing a Wide Area Network r  i                  H                                                                        7H         ________________________________________________________________  H                              Removing PATHWORKS Advanced Server Software      @               This chapter describes how to remove the PATHWORKS8               Advanced Server software from your system.  >               This chapter consists of the following sections:  D               o  Section 7.1, Removing the PATHWORKS Advanced Server  C               o  Section 7.2, Removing the PATHWORKS NetWare Servere  2         7.1 Removing the PATHWORKS Advanced Server  C               You may need to remove server software for one of theS                following reasons:  +               o  If the installation failede  D                  If the IVP indicates that the software installationC                  procedure failed, you must reinstall the PATHWORKSt*                  Advanced Server software.  C                  If your system has enough free disk space, you cantB                  install the server again without deinstalling theE                  PATHWORKS Advanced Server. If you do not have enougheH                  disk space, however, you must remove PATHWORKS Advanced/                  Server before reinstalling it.f  H                  For more information about disk space requirements, seeF                  Section 1.9.7, Step 7: Check Disk Space Requirements.  %               o  If you are upgradingC  C                  If the system is running the PATHWORKS for OpenVMSyC                  (NetWare) server, the NetWare server software musteE                  be removed before you can install PATHWORKS Advanced H                  Server. If the NetWare server is installed when you runF                  the PATHWORKS Advanced Server installation procedure,G                  it gives you the option of removing the NetWare server B                  software (Section 2.3.1, Installing the PATHWORKSF                  Advanced Server on a System with the NetWare Server).  H                          Removing PATHWORKS Advanced Server Software 7-1 e  a      3         Removing PATHWORKS Advanced Server Software 2         7.1 Removing the PATHWORKS Advanced Server  C                  Alternatively, you can manually remove the NetWareeE                  server using the procedure described in Section 7.2,r7                  Removing the PATHWORKS NetWare Server.   @         7.1.1 About the PATHWORKS Advanced Server Deinstallation               Command Proceduret  F               You remove the PATHWORKS Advanced Server using a commandC               procedure that is included when you install PATHWORKSmC               Advanced Server. The deinstallation command procedured0               performs the following operations:  5               o  Shuts down the server automatically.a  G               o  Prompts you to enter information necessary to complete '                  the removal procedure.N  F               o  Removes all PATHWORKS Advanced Server images, supportE                  files, and logical names that are created during the H                  installation procedure. Optionally removes the Advanced-                  Server data from the system.a  @               o  Removes the PATHWORKS Advanced Server accounts.  ?               o  Removes the NETBIOS$ACCESS OpenVMS identifier.   B               o  Removes PATHWORKS Advanced Server DECnet objects.  @         7.1.2 Using the PATHWORKS Advanced Server Deinstallation               Proceduren  H               To start the deinstallation procedure and remove PATHWORKS'               Advanced Server software:   E               1. Ensure that you are logged in to the SYSTEM account.v  H               2. Start the deinstallation command procedure, as follows:  ,                  $ @SYS$UPDATE:PWRK$DEINSTAL  H               Table 7-1, PWRK$DEINSTAL Prompts, tells you how to respondC               to the prompts the deinstallation procedure displays.T      7         7-2 Removing PATHWORKS Advanced Server Softwaret t  s      H                              Removing PATHWORKS Advanced Server SoftwareH                               7.1 Removing the PATHWORKS Advanced Server  H         Table_7-1_PWRK$DEINSTAL_Prompts_________________________________  M                                 If you want the removal           Enter . . .lH         At_this_prompt_._._.____procedure_to_._._.______________________  E         Are you sure you        Continue                          YES_         want to deinstall_         PATHWORKS Advanced         Server[no]:   J                                 Exit                              <Return>  J         Do you want to          Save the PATHWORKS Advanced       <Return>9         delete the PATHWORKS    Server on-disk structure, ;         Advanced Server data    including the user accounts 3         files [no]:             and share databasesn  E                                 Remove the PATHWORKS Advanced     YES 9                                 Server on-disk structure,r;                                 including the user accounts6H         ________________________and_share_databases_____________________  @         7.1.3 Sample PATHWORKS Advanced Server Removal Procedure  E               This is a sample of the removal procedure for PATHWORKS '               Advanced Server software.:  I         This procedure shuts down all PATHWORKS V6.0B for OpenVMS serversrM         and deletes all PATHWORKS V6.0B for OpenVMS (Advanced Server) images.a  c         Are you sure you want to deinstall PATHWORKS V6.0B for OpenVMS (Advanced Server)? [no]: YESKF         Do you want to delete the Advanced Server data files [no]: YES  8         Shutting down the currently running server(s)...H         Deleting PATHWORKS V6.0B for OpenVMS (Advanced Server) images....         Deleting Advanced Server data files...<         Deassigning PATHWORKS V6.0B OpenVMS logical names...I         PATHWORKS V6.0B for OpenVMS (Advanced Server) is now deinstalled.P              H                          Removing PATHWORKS Advanced Server Software 7-3           3         Removing PATHWORKS Advanced Server Software 1         7.2 Removing the PATHWORKS NetWare Serverg  1         7.2 Removing the PATHWORKS NetWare Serverm  @               The PATHWORKS for OpenVMS (NetWare) software is noE               longer included with the PATHWORKS for OpenVMS softwareaD               kit. Therefore, you must run the PATHWORKS for OpenVMSF               (NetWare) removal procedure before you install PATHWORKS,               for OpenVMS (Advanced Server).  B               To start the deinstallation procedure and remove the'               PATHWORKS NetWare server:   A               1. Be sure you are logged in to the SYSTEM account.   H               2. Start the NetWare deinstallation procedure, as follows:  ,                  $ @SYS$UPDATE:PWVN$DEINSTAL  H               Table 7-2, PWVN$DEINSTAL Prompts, tells you how to respondH               to the prompts the NetWare server deinstallation procedure               displays.a                                                  7         7-4 Removing PATHWORKS Advanced Server Software     e      H                              Removing PATHWORKS Advanced Server SoftwareH                                7.2 Removing the PATHWORKS NetWare Server  H         Table_7-2_PWVN$DEINSTAL_Prompts_________________________________  M                                 If you want the removal           Enter . . . H         At_this_prompt_._._.____procedure_to_._._.______________________  E         Are you sure you want   Continue                          YESI         to deinstall DIGITAL         PATHWORKS V1.0H for          OpenVMS (NetWare)a         [no][1]:  J                                 Exit                              <Return>  J         Do you want to delete   Save the NetWare on-disk          <Return>8         the NetWare data files  structure, including the3         [no]:                   configuration Filest  E                                 Remove the NetWare on-disk        YESH8                                 structure, including the3                                 configuration files   J         Do you want to delete   Save the NetWare SYS volume       <Return>         the NetWare SYS Volume
         [no]:L  E                                 Remove the NetWare SYS volume     YESvH         [1]To_install_PATHWORKS_Advanced_Server,_you_must_respond_to____           this question with YES.aH         ________________________________________________________________  5         7.2.1 Sample NetWare Server Removal Procedurec  C               This is a sample of the removal procedure for DIGITAL-.               PATHWORKS for OpenVMS (NetWare).  #         $ @SYS$UPDATE:PWVN$DEINSTAL J         This procedure shuts down all PATHWORKS V1.0H for OpenVMS servers,E         and deletes all PATHWORKS V1.0H for OpenVMS (NetWare) images.O  Z         Are you sure you want to deinstall PATHWORKS V1.0H for OpenVMS (NetWare) [no]: YES>         Do you want to delete the NetWare SYS Volume [no]: YES  :         Stopping PATHWORKS for OpenVMS (NetWare) Server...           Process NETBIOS stoppede&         Process PWRK$LICENSE_R stopped%         Stopping IPX Daemon (NPSD)...   H                          Removing PATHWORKS Advanced Server Software 7-5 o  w      3         Removing PATHWORKS Advanced Server Software#1         7.2 Removing the PATHWORKS NetWare Server   7         Deleting PATHWORKS for OpenVMS common images...,;         Deleting PATHWORKS for OpenVMS NETBIOS component...l@         Deleting PATHWORKS V1.0H for OpenVMS (NetWare) images...&         Deleting NetWare data files...&         Deleting NetWare SYS Volume...<         Removing PWRK$DEFAULT and PWRK$GUEST VMS accounts...;         Removing PATHWORKS V1.0H for OpenVMS identifiers... >         Removing PATHWORKS V1.0H for OpenVMS DECnet objects...@         Deassigning PATHWORKS V1.0H for OpenVMS logical names...A         PATHWORKS V1.0H for OpenVMS (NetWare) is now deinstalled.   	         $a                                                                  7         7-6 Removing PATHWORKS Advanced Server Softwared                       H                                                                        AH         ________________________________________________________________  H                                       Installation and Upgrade Checklist      H               Table A-1 summarizes the tasks that you need to perform toF               install and configure the PATHWORKS Advanced Server. YouG               can photocopy this table and use it as a checklist as you1=               read about and complete the tasks in this book.h  H         Table_A-1_Installation_and_Upgrade_Checklist____________________  @         <   >1.   Prepare for the installation by completing allH                   preinstallation tasks on the checklist in Section 1.9,B                   Pre-installation Tasks, including the following:  F                   a. Make sure that you have the required hardware and                      software.  H                   b. Log in to the SYSTEM account and back up the system                      disks.e  A                   c. Make sure that you have enough disk space tox)                      install the servers.s  C                   d. Make sure that the system parameters GBLPAGES,sB                      GBLSECTIONS, PROCSECTCNT, and SCSNODE are set                      properly.  D                   e. Make sure that the queue manager is running and@                      that the time zone is configured correctly.  B                   f. Verify that DECnet and TCP/IP, if needed, are                      running.   G                   g. Check OpenVMS cluster configuration, if installingi"                      on a cluster.  H                                                 (continued on next page)  H                                   Installation and Upgrade Checklist A-1 s         *         Installation and Upgrade Checklist    H         Table_A-1_(Cont.)_Installation_and_Upgrade_Checklist____________  A         <   >2.   Start the installation procedure and respond to2B                   installation prompts. You may choose to install:  ;                   o  The complete PATHWORKS Advanced Servers  -                   o  The Upgrade utility onlyh  ,                   o  The license server only  H                   o  The PATHWORKS External Authentication software only  B         <   >3.   Start the configuration procedure and respond to(                   configuration prompts.  D         <   >4.   If you are upgrading from PATHWORKS V5 for OpenVMSF                   (LAN Manager), complete the upgrade procedure. ReferG                   to the PATHWORKS for OpenVMS (Advanced Server) Server ?                   Migration Guide for information about how to:   5                   a. Determine the role of the server   '                   b. Upgrade the serverR  -                   c. Upgrade OpenVMS clusters   +                   d. Create upgrade reports   -                   e. Upgrade users and groupsl  #                   f. Upgrade shares   %                   g. Upgrade security   <                   h. Upgrade server configuration parameters  E         <   >5.   Run the Installation Verification Procedure (if youM?                   did not do so when you installed the server).f  A         <   >6.   Start the server (if you did not do so when youi)                   configured the server).]  @         <   >7.   Install Windows NT server administration toolsH         __________(optional).___________________________________________  .         A-2 Installation and Upgrade Checklist s                     H                                                                        BH         ________________________________________________________________  H          Sample PATHWORKS Advanced Server Installation and ConfigurationH                                                                Procedure      G               This appendix shows sample installation and configurationtH               procedures for the PATHWORKS Advanced Server on an OpenVMS               cluster.  C         B.1 Sample PATHWORKS Advanced Server Installation Procedureo  F               The following example shows a sample installation dialog0               for the PATHWORKS Advanced Server.  B         $ @SYS$UPDATE:VMSINSTAL PWRKV60B060 SYS$DEVICE:[KITS.PWRK]B           OpenVMS AXP Software Product Installation Procedure V7.1#         It is 16-OCT-1998 at 15:29. 7         Enter a question mark (?) at any time for help. F         * Are you satisfied with the backup of your system disk [YES]?  1         The following products will be processed:e           PWRKV60B V6.0O9          Beginning installation of PWRKV60B V6.0 at 15:29   >         %VMSINSTAL-I-RESTORE, Restoring product save set A ...S         %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.o  +          PATHWORKS for OpenVMS Installation   E             Digital Equipment Corporation 1998. All rights reserved.a  I            Restricted Rights: Use, duplication, or disclosure by the U.S.eM            Government is subject to restrictions as set forth in subparagraphMM            (c) (1) (ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in FAR -            52.227-14 Alt. III, as applicable._  H            This software is proprietary to and embodies the confidentialK            technology of Digital Equipment Corporation. Possession, use, or N            copying of this software and media is authorized only pursuant to aK            valid written license from DIGITAL or an authorized sublicensor.   H  PATHWORKS  Advanced Server Installation and Configuration Procedure B-1 v  e      Q         Sample PATHWORKS Advanced Server Installation and Configuration Procedure_C         B.1 Sample PATHWORKS Advanced Server Installation Proceduret  =             Please select from the following install options:r  9             PATHWORKS V6.0B for OpenVMS (Advanced Server) O             PATHWORKS V6.0B for OpenVMS (Advanced Server) license server (only)d1             External Authentication images (only)   S         * Do you want to install the complete PATHWORKS V6.0B for OpenVMS [NO]? YES_  3         The following components will be installed:   6          PATHWORKS V6.0B for OpenVMS (Advanced Server)  D         If the selection is correct, the installation will continue.G         If the selection is not correct, you can change your selection. ?         Press CTRL/Y if you want to terminate the installation.   2         * Is the selection correct [YES]? <Return>               NOTE             ----S             Because this kit provides a new streams execlet for NetBEUI and TCP/IP,AA             you MUST reboot all nodes in the cluster that are nowaP             running or have run PATHWORKS to complete installation of PATHWORKS.M             If you do not reboot the nodes at this time, you must remember ton8             reboot them later before starting PATHWORKS.  K             To complete the installation of this product, you should reboot M             the system.  If it is not convenient to reboot at this time, thens/             enter NO to the following question.   F             If you enter NO, the installation procedure will continue.  T         * Will you allow a system shutdown after this product is installed [YES]? NOJ         %PWRKV60B-I-VERSION, Checking for OpenVMS version 7.1, or later...W         * Do you want to run the IVP after the installation is finished [YES]? <Return>RR         * Do you want to purge files replaced by this installation [YES]? <Return>9         %PWRK-I-FREEBLKS, Checking for 144500 free blocks   H                       User Accounts and User Identification Codes (UICs)H                       --------------------------------------------------  R             PATHWORKS for OpenVMS creates two OpenVMS accounts: a default account,R             PWRK$DEFAULT, and  a guest account, PWRK$GUEST.  The default UIC groupH             number for both these new accounts depends on the following:  Q             o If you are installing the server for the first time, the default isvC               the first unused UIC group number, starting with 360.o  R             o If there is an existing account PCFS$ACCOUNT, the default is the UIC8               group number associated with PCFS$ACCOUNT.  U         B-2 Sample PATHWORKS Advanced Server Installation and Configuration Procedure     c      H  PATHWORKS      Advanced Server Installation and Configuration ProcedureH              B.1 Sample PATHWORKS Advanced Server Installation Procedure  U             o If there is an existing account PWRK$DEFAULT or PWRK$GUEST, the default T               is the UIC group number associated with PWRK$DEFAULT or PWRK$GUEST, inU               preference to PCFS$ACCOUNT.  However, the default UIC group number will E               not be used to change the UIC of any existing accounts.h                                                                                  H  PATHWORKS  Advanced Server Installation and Configuration Procedure B-3    R      Q         Sample PATHWORKS Advanced Server Installation and Configuration Procedure C         B.1 Sample PATHWORKS Advanced Server Installation Procedurec  P             For more information about UIC group numbers, see the OpenVMS System             Manager's Manual.t  X         * Enter default UIC group number for PWRK$DEFAULT and PWRK$GUEST [360]: <Return>  B             All questions have been answered.  The installation of0             PATHWORKS for OpenVMS will continue.  S         %PWRK-I-ACCOUNTS, Creating OpenVMS accounts for PWRK$DEFAULT and PWRK$GUESTeV         %VMSINSTAL-I-ACCOUNT, This installation creates an ACCOUNT named PWRK$DEFAULT.5         %UAF-I-ADDMSG, user record successfully addedha         %UAF-I-RDBADDMSGU, identifier PWRK$DEFAULT value [000360,000001] added to rights database T         %VMSINSTAL-I-ACCOUNT, This installation creates an ACCOUNT named PWRK$GUEST.5         %UAF-I-ADDMSG, user record successfully addedp_         %UAF-I-RDBADDMSGU, identifier PWRK$GUEST value [000360,000002] added to rights databasev>         %VMSINSTAL-I-RESTORE, Restoring product save set C ...>         %VMSINSTAL-I-RESTORE, Restoring product save set E ...I         %PWRK-I-DEFOBJS, Defining DECnet objects PCX$SERVER and PCSA$MAILI:         %PWRK-I-DCLCMDS, Installing PATHWORKS DCL commandsM         %PWRK-I-SPECIFY, Specifying target directories for the provided filest1         %PWRK-I-OBSOLETE, Deleting obsolete files_  4                                           Next Steps4                                           ----------  R             To continue the installation procedure, enter the following command to?             execute the server configuration command procedure:n  %             $ @SYS$UPDATE:PWRK$CONFIG   N             For information about the configuration command procedure, see theM             PATHWORKS (Advanced Server) Installation and Configuration Guide.   V         %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...  C           Digital Equipment Corporation 1998. All rights reserved.r  5          Starting Installation Verification Procedureu:          for PATHWORKS V6.0B for OpenVMS (Advanced Server)  2         %PWRK-I-NORMAL, IVP completed successfully9          Installation of PWRKV60B V6.0 completed at 15:36   F             Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY  R             Creating installation data file: VMI$ROOT:[SYSUPD]PWRKV60B060.VMI_DATA  *          VMSINSTAL procedure done at 15:36  U         B-4 Sample PATHWORKS Advanced Server Installation and Configuration ProcedureT R  V      H  PATHWORKS      Advanced Server Installation and Configuration ProcedureH             B.2 Sample PATHWORKS Advanced Server Configuration Procedure  D         B.2 Sample PATHWORKS Advanced Server Configuration Procedure  G               The following example shows a sample configuration dialog 0               for the PATHWORKS Advanced Server.  !         $ @SYS$UPDATE:PWRK$CONFIGoM         PATHWORKS V6.0B for OpenVMS (Advanced Server) Configuration Procedure   L             PATHWORKS stores and accesses the following types of data files:  +             o Configuration parameter files '             o License server data filesS             o Log fileso!             o Printer spool files *             o Virtual memory section files  N             You can specify any existing OpenVMS disk device that has at leastF             76500 free blocks of disk space to store these data files.  M             Note: the server frequently accesses the data files stored on theSO             disk.  If these files are stored on the system disk, it can degradesR             the performance of both the OpenVMS system and the server.  Therefore,R             Digital recommends that you specify a disk other than the system disk.  *         Press RETURN to continue: <Return>  Q             If this OpenVMS cluster has multiple system disks, make sure that allP5             nodes on which you plan to run PATHWORKS:   P             o Use the same disk device to store and access PATHWORKS data files.  Q             o Share the same SYSUAF.DAT file. In each system disk's startup file,RN               define a system logical name that points all nodes to the shared+               SYSUAF.DAT file. For example:   O               $ define/system/exec sysuaf pencil$dka300:[sys0.sysexe]sysuaf.dat-  F               The startup file is called SYS$MANAGER:SYSTARTUP_VMS.COM  H         Enter disk device name where PATHWORKS data files will be stored$         [SYS$SYSDEVICE:]: DISK$PWRK::         Creating PATHWORKS directory tree on DISK$PWRK:...2         Creating Advanced Server directory tree...A         Copying client files to Advanced Server directory tree...tW         Creating PATHWORKS Monitor user authorization file PWRK$COMMON:PWMONUAF.DAT ...   H  PATHWORKS  Advanced Server Installation and Configuration Procedure B-5    R      Q         Sample PATHWORKS Advanced Server Installation and Configuration Procedure D         B.2 Sample PATHWORKS Advanced Server Configuration Procedure  Q             Changing the server configuration parameters will allow you to modifygO             this server's client capacity and select the transports to be used.   -             COBRAZ is currently configured tot'                 + support 20 PC clients 8                 + use the following transport(s): DECnet  S             If you want this server to be the primary domain controller, you shouldeT             configure it to use all the transports used by any of the backup servers             in the domain.  P             If you want this server to be a backup domain controller, you shouldS             configure it to have at least one transport in common with the domain'spN             primary domain controller, otherwise this configuration will fail.  P             If you do not change the configuration parameters now, you may do so)             later by typing ADMIN/CONFIG.   P         Do you want to change the server configuration parameters now? [YES]: NO  4         Reading current configuration parameters ...  O           PATHWORKS V6.0 for OpenVMS is presently configured to run as follows:   7            1.  Run the license server:               NOR7            2.  Enable Timesource service:            NO 8            3.  Enable Alerter service:               YESB            3a. Alert user names:                     Administrator8            4.  Enable Netlogon service:              YES=            5.  Advanced Server domain:               LANGROUP <            6.  Advanced Server role:                 PRIMARY;            7.  Advanced Server computer name:        COBRAZ.A            7a. PATHWORKS OpenVMS cluster alias:      COBRAZ_ALIASeX            8.  Server announce comment:    PATHWORKS V6.0B for OpenVMS (Advanced Server)I         Enter item number, or RETURN to use these values [DONE]: <Return>S           Saving parameters ....1         Checking the access control list file ... *         Successfully created new ACL storeE         Creating sharefile PWRK$LMROOT:[LANMAN.DATAFILES]SHAREDB. ... '         New sharefile has been created.          ADMIN$ added         IPC$ added         PWUTIL added  U         B-6 Sample PATHWORKS Advanced Server Installation and Configuration Procedure            H  PATHWORKS      Advanced Server Installation and Configuration ProcedureH             B.2 Sample PATHWORKS Advanced Server Configuration Procedure  H             The Advanced Server Administrator network account is used toE             administer the server.  The Administrator network accountY?             is mapped by default to the OpenVMS SYSTEM account.i  R             If this server is to join an Advanced Server domain, the AdministratorG             network account password should be the same as the password C             to the domain's existing Administrator network account.   I             The network account password can be up to 14 characters long.   5         Enter Administrator network account password:   $         Re-enter to verify password:  >         Changing password for Administrator network account...$         Checking system resources...  O         The current system configuration for COBRAZ will support 20 PC clients. .         PATHWORKS is configured to use DECnet.  U             To automatically start PATHWORKS V6.0B for OpenVMS at system startup, youyT             should add the following line to the SYS$MANAGER:SYSTARTUP_VMS.COM file.  $          $ @SYS$STARTUP:PWRK$STARTUP  Q             Note: Add this line below the lines that start all network transports              (such as DECnet).c  R             Before starting PATHWORKS V6.0B for OpenVMS on this system, be sure toQ             execute @SYS$UPDATE:PWRK$CONFIG on each node that will run PATHWORKS.c  V         Do you want to start PATHWORKS V6.0B for OpenVMS on node COBRAZ now [yes]:  NO  	         $                       H  PATHWORKS  Advanced Server Installation and Configuration Procedure B-7 C  k                  H                                                                        CH         ________________________________________________________________  H          Sample Standalone License Server Installation and ConfigurationH                                                                Procedure      G               This appendix shows sample installation and configurationhF               procedures for a standalone license server on an OpenVMS               cluster.  C         C.1 Sample Standalone License Server Installation Procedureo  F               The following example shows a sample installation dialog0               for the standalone license server.  B         $ @SYS$UPDATE:VMSINSTAL PWRKV60B060 SYS$DEVICE:[KITS.PWRK]B           OpenVMS AXP Software Product Installation Procedure V7.1#         It is 16-OCT-1998 at 16:08. 7         Enter a question mark (?) at any time for help. O         * Are you satisfied with the backup of your system disk [YES]? <Return>a  1         The following products will be processed:S           PWRKV60B V6.0 9          Beginning installation of PWRKV60B V6.0 at 16:08g  >         %VMSINSTAL-I-RESTORE, Restoring product save set A ...S         %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.r  +          PATHWORKS for OpenVMS Installationn  E             Digital Equipment Corporation 1998. All rights reserved.s  I            Restricted Rights: Use, duplication, or disclosure by the U.S.yM            Government is subject to restrictions as set forth in subparagraph M            (c) (1) (ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in FARo-            52.227-14 Alt. III, as applicable._  H            This software is proprietary to and embodies the confidentialK            technology of Digital Equipment Corporation. Possession, use, orBN            copying of this software and media is authorized only pursuant to aK            valid written license from DIGITAL or an authorized sublicensor.   H  Standalone  License Server Installation and Configuration Procedure C-1           Q         Sample Standalone License Server Installation and Configuration ProcedurefC         C.1 Sample Standalone License Server Installation Procedure.  C                   Please select from the following install options:o  ?                   PATHWORKS V6.0B for OpenVMS (Advanced Server) U                   PATHWORKS V6.0B for OpenVMS (Advanced Server) license server (only)S7                   External Authentication images (only)   X               * Do you want to install the complete PATHWORKS V6.0B for OpenVMS [NO]? NOR               * Do you want to install only the PATHWORKS license server [NO]? YESW               * Do you want to install only the External Authentication images [NO]? NOs  9               The following components will be installed:o  -                PATHWORKS V6.0B license serverL  J               If the selection is correct, the installation will continue.M               If the selection is not correct, you can change your selection.OE               Press CTRL/Y if you want to terminate the installation..  8               * Is the selection correct [YES]? <Return>P               %PWRKV60B-I-VERSION, Checking for OpenVMS version 7.1, or later...]               * Do you want to run the IVP after the installation is finished [YES]? <Return>RX               * Do you want to purge files replaced by this installation [YES]? <Return>C               %PWRKV60B-I-FREEBLKS, Checking for 144500 free blockst  H                   All questions have been answered.  The installation of6                   PATHWORKS for OpenVMS will continue.  D               %VMSINSTAL-I-RESTORE, Restoring product save set C ...D               %VMSINSTAL-I-RESTORE, Restoring product save set E ...S               %PWRKV60B-I-DEFOBJS, Defining DECnet objects PCX$SERVER and PCSA$MAILaD               %PWRKV60B-I-DCLCMDS, Installing PATHWORKS DCL commandsW               %PWRKV60B-I-SPECIFY, Specifying target directories for the provided filesa;               %PWRKV60B-I-OBSOLETE, Deleting obsolete filesn  \               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...  I                 Digital Equipment Corporation 1998. All rights reserved.o  ;                Starting Installation Verification Procedure @                for PATHWORKS V6.0B for OpenVMS (Advanced Server)  8               %PWRK-I-NORMAL, IVP completed successfully?                Installation of PWRKV60B V6.0 completed at 19:33   L                   Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY  X                   Creating installation data file: VMI$ROOT:[SYSUPD]PWRKV60B060.VMI_DATA  0                VMSINSTAL procedure done at 19:34  U         C-2 Sample Standalone License Server Installation and Configuration Procedure            H  Standalone      License Server Installation and Configuration ProcedureH             C.2 Sample Standalone License Server Configuration Procedure  D         C.2 Sample Standalone License Server Configuration Procedure  E               The following example shows a sample PATHWORKS AdvancedtG               Server configuration procedure for the standalone licensey               server.v  !         $ @SYS$UPDATE:PWRK$CONFIG M         PATHWORKS V6.0B for OpenVMS (Advanced Server) Configuration Procedure,  L             PATHWORKS stores and accesses the following types of data files:  +             o Configuration parameter files '             o License server data files              o Log fileso!             o Printer spool fileso*             o Virtual memory section files  N             You can specify any existing OpenVMS disk device that has at leastE             5500 free blocks of disk space to store these data files.r  M             Note: the server frequently accesses the data files stored on theUO             disk.  If these files are stored on the system disk, it can degrade R             the performance of both the OpenVMS system and the server.  Therefore,R             Digital recommends that you specify a disk other than the system disk.  !         Press RETURN to continue:   Q             If this OpenVMS cluster has multiple system disks, make sure that allf5             nodes on which you plan to run PATHWORKS:i  P             o Use the same disk device to store and access PATHWORKS data files.  Q             o Share the same SYSUAF.DAT file. In each system disk's startup file,aN               define a system logical name that points all nodes to the shared+               SYSUAF.DAT file. For example:   O               $ define/system/exec sysuaf pencil$dka300:[sys0.sysexe]sysuaf.dat   F               The startup file is called SYS$MANAGER:SYSTARTUP_VMS.COM  H         Enter disk device name where PATHWORKS data files will be stored$         [SYS$SYSDEVICE:]: DISK$PWRK:  :         Creating PATHWORKS directory tree on DISK$PWRK:...  W           The PATHWORKS license server can serve PATHWORKS licenses for Advanced Server T           clients over DECnet, NetBEUI, and TCP/IP.  The Advanced Server file serverH           does not need to be running for the license server to operate.  H  Standalone  License Server Installation and Configuration Procedure C-3 a  e      Q         Sample Standalone License Server Installation and Configuration ProcedurePD         C.2 Sample Standalone License Server Configuration Procedure  K         Do you want to serve PATHWORKS licenses over DECnet [yes]: <Return>aF         Do you want to serve PATHWORKS licenses over NetBEUI [no]: YESE         Do you want to serve PATHWORKS licenses over TCP/IP [no]: YESe  G         Do you want to start the PATHWORKS license server now [yes]: NOn                                                                                U         C-4 Sample Standalone License Server Installation and Configuration Procedured R  E      H  Standalone      License Server Installation and Configuration ProcedureH             C.2 Sample Standalone License Server Configuration Procedure  \                   To automatically start the PATHWORKS license server at system startup, youZ                   should add the following line to the SYS$MANAGER:SYSTARTUP_VMS.COM file:  1                       $ @SYS$STARTUP:PWRK$STARTUPt  W                   Note: Add this line below the lines that start all network transportsI#                   (such as DECnet).E                 $-                                                                        H  Standalone  License Server Installation and Configuration Procedure C-5 e  y                  H                                                                        DH         ________________________________________________________________  H                                             Upgrade Utility Installation      F               This appendix shows a sample installation of the Upgrade               utility.  *         D.1 Installing the Upgrade Utility  E               As a first step in upgrading a system that is running anG               previously released version of PATHWORKS Advanced Server,nH               you can install the Upgrade utility without installing theG               server. Doing this allows you to run the PATHWORKS V5 fortG               OpenVMS (LAN Manager) server while performing the upgradenF               procedure, avoiding any interruption of services to your               users.  B               If you install the Upgrade utility only, the on-diskD               structure and datafile format are not changed, and theH               PATHWORKS V5 for OpenVMS (LAN Manager) executables are not               replaced.S  E               When you execute the installation procedure on a system E               that is running PATHWORKS V5 for OpenVMS (LAN Manager),tC               the procedure offers you the option of installing theaH               Upgrade utility only. To install the Upgrade utility only,!               select this option.   F                 ________________________Note  ________________________  >                 When you install the Upgrade utility only, youB                 cannot run the Installation Verification Procedure?                 (IVP); therefore, the prompt asking whether youv?                 want to run the IVP is not displayed during thet                 installation.   E                 _____________________________________________________     H                                         Upgrade Utility Installation D-1 n         $         Upgrade Utility Installation9         D.2 Sample Upgrade Utility Installation Proceduree  9         D.2 Sample Upgrade Utility Installation Procedureo  @               The following example shows a sample procedure for7               installation of the Upgrade utility only.S  B         $ @SYS$UPDATE:VMSINSTAL PWRKV60B060 SYS$DEVICE:[KITS.PWRK]B           OpenVMS AXP Software Product Installation Procedure V7.1#         It is 22-OCT-1998 at 15:14. 7         Enter a question mark (?) at any time for help. H         * Are you satisfied with the backup of your system disk [YES]? y  1         The following products will be processed:,           PWRKV60B V6.0 9          Beginning installation of PWRKV60B V6.0 at 15:14   >         %VMSINSTAL-I-RESTORE, Restoring product save set A ...S         %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.u  +          PATHWORKS for OpenVMS Installation   E             Digital Equipment Corporation 1998. All rights reserved.F  I            Restricted Rights: Use, duplication, or disclosure by the U.S..M            Government is subject to restrictions as set forth in subparagraphAM            (c) (1) (ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in FARb-            52.227-14 Alt. III, as applicable.   H            This software is proprietary to and embodies the confidentialK            technology of Digital Equipment Corporation. Possession, use, orSN            copying of this software and media is authorized only pursuant to aK            valid written license from DIGITAL or an authorized sublicensor.n  F          You have the option to install only the PATHWORKS for OpenVMSD          Advanced Server upgrade utility, which upgrades your serverF          environment from V5 to V6.  If you choose to install only theF          upgrade utility, no file server components will be installed.  J          The upgrade utility allows you to continue to run your V5 serversL          while you perform the upgrade.  You may install the Advanced Server9          after your server environment has been upgraded.p  H          However, if you choose not to install the upgrade utility only,I          the installation will proceed with the regular kit installation.rL          You may invoke the upgrade utility after the installation by typing$          @SYS$UPDATE:PWRK$V6UPGRADE.  O          The following question allows you to install only the upgrade utility:n  (         D-2 Upgrade Utility Installation    m      H                                             Upgrade Utility InstallationH                        D.2 Sample Upgrade Utility Installation Procedure  C         * Do you want to install the upgrade utility only [NO]? YEShF         %PWRK-I-VERSION, Checking for OpenVMS version 7.1, or later...I         * Do you want to purge files replaced by this installation [YES]? 8         %PWRK-I-FREEBLKS, Checking for 30000 free blocks>         %VMSINSTAL-I-RESTORE, Restoring product save set C ...                                                                                H                                         Upgrade Utility Installation D-3 r  r      $         Upgrade Utility Installation9         D.2 Sample Upgrade Utility Installation Procedure   9                                                 Next Step 9                                                 ---------   N                   To upgrade the server, enter the following command to invoke-                   the server upgrade utility:   +                $ @SYS$UPDATE:PWRK$V6UPGRADE)  N                   For information about the upgrade utility, see the PATHWORKS;                   (Advanced Server) Server Migration Guide.t  \               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...  K                   Digital Equipment Corporation 1998. All rights reserved.   ?                Installation of PWRKV60B V6.0 completed at 15:15   L                   Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY  X                   Creating installation data file: VMI$ROOT:[SYSUPD]PWRK060B060.VMI_DATA  0                VMSINSTAL procedure done at 15:16                 $e                                          (         D-4 Upgrade Utility Installation                       H                                                                        EH         ________________________________________________________________  H                    Sample External Authentication Installation Procedure      G               This appendix shows a sample procedure for installing thei4               external authentication software only.  @         E.1 Sample External Authentication Software Installation             Proceduree  F               The following example shows a sample installation dialog<               for the external authentication software only.  A          OpenVMS AXP Software Product Installation Procedure V7.1u  "         It is 8-NOV-1998 at 19:48.  7         Enter a question mark (?) at any time for help. O         * Are you satisfied with the backup of your system disk [YES]? <Return>   1         The following products will be processed:e           PWRKV60B V6.0S  9          Beginning installation of PWRKV60B V6.0 at 19:48   >         %VMSINSTAL-I-RESTORE, Restoring product save set A ...S         %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.0  +          PATHWORKS for OpenVMS Installation   E             Digital Equipment Corporation 1998. All rights reserved.S  I            Restricted Rights: Use, duplication, or disclosure by the U.S. M            Government is subject to restrictions as set forth in subparagraph M            (c) (1) (ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in FAR -            52.227-14 Alt. III, as applicable.   H            This software is proprietary to and embodies the confidentialK            technology of Digital Equipment Corporation. Possession, use, orCN            copying of this software and media is authorized only pursuant to aK            valid written license from DIGITAL or an authorized sublicensor.g  H                Sample External Authentication Installation Procedure E-1 S         =         Sample External Authentication Installation ProcedureIJ         E.1 Sample External Authentication Software Installation Procedure  C                   Please select from the following install options:   ?                   PATHWORKS V6.0B for OpenVMS (Advanced Server)]U                   PATHWORKS V6.0B for OpenVMS (Advanced Server) license server (only)O7                   External Authentication images (only)a  ^               * Do you want to install the complete PATHWORKS V6.0B for OpenVMS [NO]? <Return>W               * Do you want to install only the PATHWORKS license server [NO]? <Return> X               * Do you want to install only the External Authentication images [NO]? YES  9               The following components will be installed:P  4                External Authentication images (only)  J               If the selection is correct, the installation will continue.M               If the selection is not correct, you can change your selection.dE               Press CTRL/Y if you want to terminate the installation.t  8               * Is the selection correct [YES]? <Return>P               %PWRKV60B-I-VERSION, Checking for OpenVMS version 7.1, or later...]               * Do you want to run the IVP after the installation is finished [YES]? <Return> X               * Do you want to purge files replaced by this installation [YES]? <Return>C               %PWRKV60B-I-FREEBLKS, Checking for 144500 free blocksr  H                   All questions have been answered.  The installation of6                   PATHWORKS for OpenVMS will continue.  D               %VMSINSTAL-I-RESTORE, Restoring product save set B ...D               %VMSINSTAL-I-RESTORE, Restoring product save set C ...S               %PWRKV60B-I-DEFOBJS, Defining DECnet objects PCX$SERVER and PCSA$MAILeW               %PWRKV60B-I-SPECIFY, Specifying target directories for the provided filesn;               %PWRKV60B-I-OBSOLETE, Deleting obsolete files   \               %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...  I                 Digital Equipment Corporation 1998. All rights reserved.6  ;                Starting Installation Verification Procedurel@                for PATHWORKS V6.0B for OpenVMS (Advanced Server)  8               %PWRK-I-NORMAL, IVP completed successfully?                Installation of PWRKV60B V6.0 completed at 19:52l  L                   Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY  X                   Creating installation data file: VMI$ROOT:[SYSUPD]PWRKV60B060.VMI_DATA  W               Enter the products to be processed from the next distribution volume set.t  0                VMSINSTAL procedure done at 19:54  A         E-2 Sample External Authentication Installation Procedurek                       H                                                                        FH         ________________________________________________________________  H                    PATHWORKS Advanced Server Files and On-Disk Structure      <               This appendix includes the following sections:  H               o  Section F.1, PATHWORKS Advanced Server Files, describesC                  the files that are created during the installationO                  procedure.t  ?               o  Section F.2, PATHWORKS Advanced Server On-DisksH                  Structure, shows the on-disk structure of the PATHWORKS!                  Advanced Server.   +         F.1 PATHWORKS Advanced Server Fileso  C               Table F-1, Files Installed for the PATHWORKS AdvancedsF               Server, describes the files created during the installa-4               tion of the PATHWORKS Advanced Server.  H         Table_F-1_Files_Installed_for_the_PATHWORKS_Advanced_Server_____  H         File_________________________________Description________________  H         DCPS$EXAMPLES:PWRK$BORDER.LUP        DECprint Supervisor printer>                                              layup for borders  H         DCPS$EXAMPLES:PWRK$NOBORDER.LUP      DECprint Supervisor printerA                                              layup for no borders   H         DCPS$EXAMPLES:PWRK$REV_LANDSCAPE_    DECprint Supervisor printerC         BORDER.LUP                           layup for borders withV4                                              Windows  H         DCPS$EXAMPLES:PWRK$REV_LANDSCAPE_    DECprint Supervisor printerF         NOBORDER.LUP                         layup for no borders with4                                              Windows  H                                                 (continued on next page)  H                PATHWORKS Advanced Server Files and On-Disk Structure F-1 P  W      =         PATHWORKS Advanced Server Files and On-Disk Structures+         F.1 PATHWORKS Advanced Server Files   D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  G         SYS$HELP:PWRK$ADMIN_CFG.HLB          Configuration Manager help 1                                              file   F         SYS$HELP:PWRKV60B060.RELEASE_NOTES   PATHWORKS Advanced Server:                                              release notes  F         SYS$HELP:PWRK$V6UPGRADE.HLB          Upgrade utility help file  A         SYS$HELP:PCDISKHLP.HLB               DOS File Maintenance A                                              utility help library   A         SYS$HELP:PWRK$ADMIN_LIC.HLB          License Manager helpa4                                              library  ?         SYS$LIBRARY:NETBIOSSHR.EXE           NetBIOS for DECnet <                                              shareable image  A         SYS$LIBRARY:PCDISKSHR.EXE            DOS File Maintenance D                                              utility shareable image  H         SYS$LIBRARY:PCSA_MAILSHR.EXE         Mail notification shareable2                                              image  G         SYS$LIBRARY:PWRK$CMTLIBSHR.EXE       Configurator, Monitor, andtD                                              Tuner shareable library  G         SYS$LIBRARY:PWRK$CMTSHR.EXE          Configurator, Monitor, and B                                              Tuner shareable image  F         SYS$LIBRARY:PWRK$CSSHR_V7.EXE        Common services shareable2                                              image  C         SYS$LIBRARY:PWRK$DEVCTL_GENERIC.TLB  Generic device controlA4                                              library  H         SYS$LIBRARY:PWRK$DEVCTL_LA51.TLB     LA51 device control library  H         SYS$LIBRARY:PWRK$DEVCTL_LA70.TLB     LA70 device control library  A         SYS$LIBRARY:PWRK$DEVCTL_LA75P.TLB    LA75P device controln4                                              library  H         SYS$LIBRARY:PWRK$DEVCTL_LG01.TLB     LG01 device control library  H         SYS$LIBRARY:PWRK$DEVCTL_LG02.TLB     LG02 device control library  H         SYS$LIBRARY:PWRK$DEVCTL_LG06.TLB     LG06 device control library  H                                                 (continued on next page)  A         F-2 PATHWORKS Advanced Server Files and On-Disk Structure            H                    PATHWORKS Advanced Server Files and On-Disk StructureH                                      F.1 PATHWORKS Advanced Server Files  D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  H         SYS$LIBRARY:PWRK$DEVCTL_LG31.TLB     LG31 device control library  A         SYS$LIBRARY:PWRK$DEVCTL_LN03R.TLB    LN03R device controlt4                                              library  A         SYS$LIBRARY:PWRK$DEVCTL_DL1100.TLB   DEClaser 1100 device <                                              control library  A         SYS$LIBRARY:PWRK$DEVCTL_DL2100.TLB   DEClaser 2100 device <                                              control library  B         SYS$LIBRARY:PWRK$DEVCTL_DL2100P.TLB  DEClaser 2100P device<                                              control library  A         SYS$LIBRARY:PWRK$DEVCTL_DL2200.TLB   DEClaser 2200 device <                                              control library  B         SYS$LIBRARY:PWRK$DEVCTL_DL2200P.TLB  DEClaser 2200P device<                                              control library  A         SYS$LIBRARY:PWRK$DEVCTL_DL3200.TLB   DEClaser 3200 devicel<                                              control library  B         SYS$LIBRARY:PWRK$DEVCTL_FX1050.TLB   FX1050 device control4                                              library  A         SYS$LIBRARY:PWRK$DEVCTL_FX850.TLB    FX850 device control 4                                              library  G         SYS$LIBRARY:PWRK$DEVCTL_HP_          HP LaserJet device control 4         LASERJET.TLB                         library  A         SYS$LIBRARY:PWRK$DEVCTL_LA210.TLB    LA210 device controly4                                              library  A         SYS$LIBRARY:PWRK$DEVCTL_LA324.TLB    LA324 device control 4                                              library  H         SYS$LIBRARY:PWRK$DEVCTL_LA50.TLB     LA50 device control library  H         SYS$LIBRARY:PWRK$DEVCTL_LA75.TLB     LA75 device control library  A         SYS$LIBRARY:PWRK$DEVCTL_LJ250.TLB    LJ250 device controls4                                              library  H         SYS$LIBRARY:PWRK$DEVCTL_LN03.TLB     LN03 device control library  H                                                 (continued on next page)  H                PATHWORKS Advanced Server Files and On-Disk Structure F-3           =         PATHWORKS Advanced Server Files and On-Disk Structure +         F.1 PATHWORKS Advanced Server Files   D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  E         SYS$LIBRARY:PWRK$DEVCTL_LN03P.TLB    LN03 PLUS device controlt4                                              library  F         SYS$LIBRARY:PWRK$DEVCTL_PROPRINTER.TLProprinter device control4                                              library  H         SYS$LIBRARY:PWRK$DEVCTL_SILENTWRITER.SilentWriter device control4                                              library  D         SYS$LIBRARY:PWRK$FSLIB_ODS2.EXE      ODS2/ODS5 addon library  F         SYS$LIBRARY:PWRK$LICENSE_LIBSHR.EXE  License shareable library  ?         SYS$LIBRARY:PWRK$LICENSE_            License managementf<         MGMTSHR.EXE                          shareable image  D         SYS$LIBRARY:PWRK$PCMSHR.EXE          Cache manager shareable2                                              image  E         SYS$LIBRARY:PWRK$PRINTER_            Printer information file          INFORMATION.DAT,  E         SYS$LIBRARY:PWRK$SDA.EXE             Extension for the SystemR:                                              Dump Analyzer  C         SYS$LIBRARY:PWRK$SDA_V1.EXE          Original extension forhA                                              System Dump Analyzerm  D         SYS$LIBRARY:PWRK$STREAMSSHR_V7.EXE   Streams shareable image  F         SYS$LIBRARY:PWRK$WINLIBSHR.EXE       PATHWORKS Advanced Server@                                              character-cell userF                                              interface shareable image  G         SYS$LIBRARY:PWRK$XTILIBSHR.EXE       X/Open Transport Interfacei>                                              shareable library  G         SYS$LIBRARY:PWRK$XTINETBIOSSHR.EXE   X/Open Transport InterfacenH                                              shareable image for NetBIOS  G         SYS$LIBRARY:PWRK$XTINSPNBSHR.EXE     X/Open Transport Interface G                                              shareable image for DECnet   G         SYS$LIBRARY:XTI.H                    X/Open Transport Interface 8                                              header file  H                                                 (continued on next page)  A         F-4 PATHWORKS Advanced Server Files and On-Disk Structurep           H                    PATHWORKS Advanced Server Files and On-Disk StructureH                                      F.1 PATHWORKS Advanced Server Files  D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  G         SYS$LOADABLE_IMAGES:PCFSDRIVERDEF.STBData structure definitionsr;                                              for PCFSDRIVERp  D         SYS$LOADABLE_IMAGES:PWRK$STREAMSOS_  Streams system loadable2         V7.EXE                               image  =         SYS$LOADABLE_IMAGES:PWRK$STREAMSOS_  Symbol table for B         V7.STB                               PWRK$STREAMSOS_V7.EXE  B         SYS$LOADABLE_IMAGES:SYS$PCFSDRIVER_  DECnet I/O and double;         V7.EXE                               mapping driver   =         SYS$LOADABLE_IMAGES:SYS$PCFSDRIVER_  Symbol table for B         V7.STB                               SYS$PCFSDRIVER_V7.EXE  E         SYS$LOADABLE_IMAGES:SYS$PCIDRIVER_   Cluster Interconnect I/O 3         V7.EXE                               driver   =         SYS$LOADABLE_IMAGES:SYS$PCIDRIVER_   Symbol table for A         V7.STB                               SYS$PCIDRIVER_V7.EXE   C         SYS$MANAGER:PWRK$DEFINE_COMMANDS.COM[Command procedure that @                                              defines symbols forH                                              commands that run PATHWORKSF                                              Advanced Server utilities  C         SYS$MANAGER:PWRK$DEFINE_ROOT.COM     Directory tree logicaln  C         SYS$MANAGER:PWRK$SHOWSYS.COM         Command procedure thatlH                                              shows status of file server6                                              processes  H         SYS$MESSAGE:PWRK$MSG.EXE             Advanced Server for OpenVMS9                                              message fileS  C         SYS$STARTUP:PWRK$CHECK_PARAMS.COM    Command procedure that1D                                              checks system resources  C         SYS$STARTUP:PWRK$COMMON_LOGICALS.COM Command procedure that D                                              defines common logicals  D         SYS$STARTUP:PWRK$COMMON_SHUTDOWN.COM Common shutdown command6                                              procedure  H         [1]This_file_is_(or_is_associated_with)_an_unsupported_utility__           or command procedure.   H                                                 (continued on next page)  H                PATHWORKS Advanced Server Files and On-Disk Structure F-5    l      =         PATHWORKS Advanced Server Files and On-Disk Structureh+         F.1 PATHWORKS Advanced Server Files   D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  C         SYS$STARTUP:PWRK$COMMON_STARTUP.COM  Common startup commands6                                              procedure  C         SYS$STARTUP:PWRK$GATHER_INFO.COM     Command procedure thateE                                              gathers information intosE                                              a save set for reportingO5                                              problemsC  D         SYS$STARTUP:PWRK$LICENSE_R_          Startup for the License6         START.COM                            Registrar  D         SYS$STARTUP:PWRK$LICENSE_S_          Startup for the license3         START.COM                            serverR  D         SYS$STARTUP:PWRK$LICENSE_            License server shutdown>         SHUTDOWN.COM                         command procedure  C         SYS$STARTUP:PWRK$LICENSE_            License server startups>         STARTUP.COM                          command procedure  C         SYS$STARTUP:PWRK$LOGICALS.COM        Command procedure that B                                              defines logical names  G         SYS$STARTUP:PWRK$SHUTDOWN.COM        Shutdown command proceduree  F         SYS$STARTUP:PWRK$STARTUP.COM         Startup command procedure  ?         SYS$SYSTEM:NetBIOS.EXE               NetBIOS for DECnet   A         SYS$SYSTEM:PCDISK.EXE                DOS File Maintenance 4                                              utility  B         SYS$SYSTEM:PCSA$MAIL_SERVER.EXE      PATHWORKS client mail3                                              serverc  D         SYS$SYSTEM:PCSA_CLAIM_NAME.EXE       PCSA claim name utility  C         SYS$SYSTEM:PCX$SERVER.COM            Command procedure thatwG                                              starts the PC DECwindows X 3                                              servere  F         SYS$SYSTEM:PWRK$ACLADM.EXE           Server configuration tool  F         SYS$SYSTEM:PWRK$BLOBADM.EXE          Server configuration tool  F         SYS$SYSTEM:PWRK$CHACL.EXE            Server configuration tool  E         SYS$SYSTEM:PWRK$CHANGEV5ROLE.EXE     V5 to V6 Upgrade utilityc  H                                                 (continued on next page)  A         F-6 PATHWORKS Advanced Server Files and On-Disk Structure            H                    PATHWORKS Advanced Server Files and On-Disk StructureH                                      F.1 PATHWORKS Advanced Server Files  D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  F         SYS$SYSTEM:PWRK$CHDOMAIN.EXE         Server configuration tool  =         SYS$SYSTEM:PWRK$DELETEACE.EXE        File ACE utilitye  B         SYS$SYSTEM:PWRK$ELFREAD.EXE          Event log file reader4                                              utility  @         SYS$SYSTEM:PWRK$EVTREPORT.EXE        Event logger report6                                              generator  F         SYS$SYSTEM:PWRK$GETROLE.EXE          Server configuration tool  B         SYS$SYSTEM:PWRK$KNBDAEMON.EXE        Kernel NetBIOS daemon4                                              process  >         SYS$SYSTEM:PWRK$LICENSE_REGISTRAR.EXELicense Registrar  ;         SYS$SYSTEM:PWRK$LICENSE_SERVER.EXE   License serverr  >         SYS$SYSTEM:PWRK$LMECHO.EXE           Debugging utility:                                              (unsupported)  >         SYS$SYSTEM:PWRK$LMSTAT.EXE           Debugging utility:                                              (unsupported)  F         SYS$SYSTEM:PWRK$LOADSTREAMS_V7.EXE   Loader for streams system;                                              loadable imagep  H         SYS$SYSTEM:PWRK$LR_SHOW_USAGE.EXE[1] License count units utility  >         SYS$SYSTEM:PWRK$LSACL.EXE            Debugging utility:                                              (unsupported)  F         SYS$SYSTEM:PWRK$MAKEMACH.EXE         Server configuration tool  >         SYS$SYSTEM:PWRK$MAPUNAME.EXE         Debugging utility:                                              (unsupported)  E         SYS$SYSTEM:PWRK$MASTER.EXE           Master process and eventi3                                              loggerK  F         SYS$SYSTEM:PWRK$MONITOR.EXE          PATHWORKS Monitor utility  C         SYS$SYSTEM:PWRK$NBDAEMON.EXE         NetBIOS daemon process   H         SYS$SYSTEM:PWRK$NBSHOW.EXE[1]        NetBEUI show status utility  H         [1]This_file_is_(or_is_associated_with)_an_unsupported_utility__           or command procedure.H  H                                                 (continued on next page)  H                PATHWORKS Advanced Server Files and On-Disk Structure F-7 i  t      =         PATHWORKS Advanced Server Files and On-Disk Structure +         F.1 PATHWORKS Advanced Server FilesH  D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  >         SYS$SYSTEM:PWRK$NETEVENT.EXE         Debugging utility:                                              (unsupported)  G         SYS$SYSTEM:PWRK$PWMON.EXE[1]         Host-based monitor utilityN  F         SYS$SYSTEM:PWRK$RMACL.EXE            Server configuration tool  F         SYS$SYSTEM:PWRK$SAMCHECK.EXE         Server configuration tool  H         SYS$SYSTEM:PWRK$SETSHO.EXE           Set/Show Parameters utility  D         SYS$SYSTEM:PWRK$SHOWQUOTA.EXE        Show Disk Quota utility  >         SYS$SYSTEM:PWRK$SRVCONFIG.EXE        Debugging utility:                                              (unsupported)  @         SYS$SYSTEM:PWRK$START.EXE            Utility that startsD                                              detached master process  >         SYS$SYSTEM:PWRK$STARTSVC.EXE         Debugging utility:                                              (unsupported)  F         SYS$SYSTEM:PWRK$STOP.EXE             Utility that stops server6                                              processes  F         SYS$SYSTEM:PWRK$VAPFADM.EXE          Server configuration tool  B         SYS$SYSTEM:PWRK$VERIFY.EXE           Utility that verifiesE                                              configuration parametersN  F         SYS$TEST:PWRK$IVP.COM                Installation Verification<                                              Procedure (IVP)  F         SYS$TEST:PWRK$IVP.DAT                Installation Verification@                                              Procedure data file  @         SYS$UPDATE:PWRK$COMMANDS.CLD         Server command line8                                              definitions  C         SYS$UPDATE:PWRK$COMMON.SAV[2]        Backup saveset for the E                                              initial server directorya1                                              tree   A         SYS$UPDATE:PWRK$COMMON_CONFIG.COM    Common configuration >                                              command procedure  H         [1]This_file_is_(or_is_associated_with)_an_unsupported_utility__           or command procedure.$?         [2]This file is deleted after you configure the server.   H                                                 (continued on next page)  A         F-8 PATHWORKS Advanced Server Files and On-Disk Structure            H                    PATHWORKS Advanced Server Files and On-Disk StructureH                                      F.1 PATHWORKS Advanced Server Files  D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  C         SYS$UPDATE:PWRK$CONFIG.COM           One-time configurationr>                                              command procedure  C         SYS$UPDATE:PWRK$DEFINE_FORMS.COM[2]  Command procedure that B                                              defines printer forms  F         SYS$UPDATE:PWRK$DEINSTAL.COM         PATHWORKS Advanced ServerF                                              removal command procedure  H         SYS$UPDATE:PWRK$GETPARAM.COM         Command procedure that getsF                                              a parameter from PWRK.INI  C         SYS$UPDATE:PWRK$INSTALL_COMMANDS.COM Command procedure thatF@                                              installs server DCL5                                              commands   F         SYS$UPDATE:PWRK$LICENSE_CONFIG.COM   License server configura-C                                              tion command procedure_  C         SYS$UPDATE:PWRK$SETINI.COM           Command procedure that$@                                              updates file server7                                              parameterso  H         SYS$UPDATE:PWRK$SETPARAM.COM         Command procedure that setsD                                              a parameter in PWRK.INI  C         SYS$UPDATE:PWRK$VERSIONS.COM         Command procedure thatWH                                              shows server image versions  E         SYS$HELP:PWRK$MANAGER.HLB            ADMINISTER commands help04                                              library  K         SYS$HELP:PWRK$SHOWINI.HLB[1]         Help file for PWRK$SHOWINI.EXET  D         SYS$LIBRARY:PWRK$ACME_MODULE_        External authentication8         ALPHA.EXE                            Alpha image  H         SYS$LIBRARY:PWRK$ACME_MODULE_        External authentication VAX2         VAX.EXE                              image  H         [1]This_file_is_(or_is_associated_with)_an_unsupported_utility__           or command procedure.$?         [2]This file is deleted after you configure the server.   H                                                 (continued on next page)  H                PATHWORKS Advanced Server Files and On-Disk Structure F-9    l      =         PATHWORKS Advanced Server Files and On-Disk Structurev+         F.1 PATHWORKS Advanced Server Files   D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  B         SYS$LIBRARY:PWRK$CMT_LM.EXE          User interface to theC                                              Configurator, Monitor,I>                                              and Tuner utility  F         SYS$LIBRARY:PWRK$LMAPISHR.EXE        PATHWORKS Advanced Server<                                              shareable image  F         SYS$LIBRARY:PWRK$LMRPCAPISHR.EXE     PATHWORKS Advanced Server<                                              shareable image  F         SYS$LIBRARY:PWRK$LMRPCSHR.EXE        PATHWORKS Advanced Server<                                              shareable image  F         SYS$LIBRARY:PWRK$LMRPCXNPSHR.EXE     PATHWORKS Advanced Server<                                              shareable image  F         SYS$LIBRARY:PWRK$LMTASKSHR.EXE       PATHWORKS Advanced Server<                                              shareable image  F         SYS$LIBRARY:PWRK$MGTLIBSHR.EXE       PATHWORKS Advanced Server<                                              shareable image  F         SYS$LIBRARY:PWRK$NBLIB_DECNET.EXE    PATHWORKS Advanced ServerH                                              network interface to DECnet  F         SYS$LIBRARY:PWRK$NBLIB_NETBEUI.EXE   PATHWORKS Advanced ServerA                                              network interface toK4                                              NetBEUI  F         SYS$LIBRARY:PWRK$NBLIB_TCPIP.EXE     PATHWORKS Advanced ServerH                                              network interface to TCP/IP  E         SYS$STARTUP:PCSA$MAIL_STARTUP.COM    PCSAMAIL command for TCPKE                                              /IP clients invoking the B                                              PATHWORKS mail server  D         SYS$STARTUP:PWRK$ACME_STARTUP.COM    External authentication9                                              startup file   A         SYS$STARTUP:PWRK$LMBROWSER_          Browser startup file          START.COMA  C         SYS$STARTUP:PWRK$LMDMN_START.COM     Command procedure that H                                              runs the PATHWORKS Advanced:                                              Server daemon  H                                                 (continued on next page)  B         F-10 PATHWORKS Advanced Server Files and On-Disk Structure           H                    PATHWORKS Advanced Server Files and On-Disk StructureH                                      F.1 PATHWORKS Advanced Server Files  D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  C         SYS$STARTUP:PWRK$LMMCP_START.COM     Command procedure thataH                                              runs the PATHWORKS Advanced>                                              Server controller  C         SYS$STARTUP:PWRK$LMSRV_START.COM     Command procedure that H                                              runs the PATHWORKS Advanced3                                              Server   C         SYS$STARTUP:PWRK$PCSA_SHUTDOWN.COM   PATHWORKS for VMS V4.x G                                              shutdown command procedure   E         SYS$SYSTEM:PWRK$ADMIN.COM            Remote Net Admin command_6                                              procedure  B         SYS$SYSTEM:PWRK$ADMIN_CFG.EXE        Configuration Manager4                                              utility  D         SYS$SYSTEM:PWRK$ADMIN_LIC.EXE        License Manager utility  B         SYS$SYSTEM:PWRK$BANNER.EXE           Utility that collectsC                                              system information andeE                                              inserts it at top of log 2                                              files  D         SYS$SYSTEM:PWRK$CHGROUP.EXE[1]       Standalone utility thatB                                              manages the PATHWORKSC                                              Advanced Server groups 5                                              databaseI  D         SYS$SYSTEM:PWRK$CHUSER.EXE[1]        Standalone utility thatB                                              manages the PATHWORKSA                                              Advanced Server user >                                              accounts database  F         SYS$SYSTEM:PWRK$LMBROWSER.EXE        PATHWORKS Advanced Server:                                              browser image  F         SYS$SYSTEM:PWRK$LMDMN.EXE            PATHWORKS Advanced Server3                                              daemonv  F         SYS$SYSTEM:PWRK$LMMCP.EXE            PATHWORKS Advanced Server7                                              controllerC  H         [1]This_file_is_(or_is_associated_with)_an_unsupported_utility__           or command procedure.   H                                                 (continued on next page)  H               PATHWORKS Advanced Server Files and On-Disk Structure F-11           =         PATHWORKS Advanced Server Files and On-Disk StructureM+         F.1 PATHWORKS Advanced Server Files   D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  D         SYS$SYSTEM:PWRK$LMSHARE.EXE[1]       Standalone utility thatB                                              manages the PATHWORKSC                                              Advanced Server sharesu5                                              database   F         SYS$SYSTEM:PWRK$LMSRV.EXE            PATHWORKS Advanced Server  D         SYS$SYSTEM:PWRK$MANAGER.EXE          ADMINISTER command lineC                                              user interface utilitye  D         SYS$SYSTEM:PWRK$MODAL.EXE[1]         Standalone utility thatB                                              manages the PATHWORKSC                                              Advanced Server modalsp5                                              database_  G         SYS$SYSTEM:PWRK$SHOWINI.EXE[1]       Utility that displays file >                                              server parameters  @         SYS$SYSTEM:PWRK$START_PRINTERS.EXE   Utility that startsG                                              printer queues and printer 9                                              destinations   C         SYS$UPDATE:PWRK$LANMAN.SAV[2]        BACKUP saveset for theSG                                              initial PATHWORKS AdvancedsB                                              Server directory tree  E         SYS$UPDATE:PWRK$LICENSE.SAV          PATHWORKS client license 4                                              saveset  H         SYS$UPDATE:PWRK$LMCONFIG.COM         Command procedure that setsE                                              up the initial PATHWORKS F                                              Advanced Server directory1                                              treee  >         SYS$UPDATE:PWRK$ROLLBACK.COM         Command procedureA                                              for restoring the V5o8                                              environment  E         SYS$UPDATE:PWRK$V6UPGRADE.EXE        V5 to V6 Upgrade utility   H         [1]This_file_is_(or_is_associated_with)_an_unsupported_utility__           or command procedure. ?         [2]This file is deleted after you configure the server.S  H                                                 (continued on next page)  B         F-12 PATHWORKS Advanced Server Files and On-Disk Structure S  l      H                    PATHWORKS Advanced Server Files and On-Disk StructureH                                      F.1 PATHWORKS Advanced Server Files  D         Table F-1 (Cont.) Files Installed for the PATHWORKS AdvancedH         __________________Server________________________________________  H         File_________________________________Description________________  E         SYS$UPDATE:PWRK$V6UPGRADE.COM        V5 to V6 upgrade command 6                                              procedure  ?         SYS$UPDATE:PWRK$PWUTIL.SAV[2]        BACKUP saveset fordC                                              PATHWORKS client-basedD6                                              utilitiesH         [2]This_file_is_deleted_after_you_configure_the_server._________  H         ________________________________________________________________  7         F.2 PATHWORKS Advanced Server On-Disk Structure_  E               Figure F-1, PATHWORKS Advanced Server On-Disk Structure_B               Diagram, shows the PATHWORKS Advanced Server on-diskH               structure. Note that only a portion of the substructure is               shown.                                                H               PATHWORKS Advanced Server Files and On-Disk Structure F-13           =         PATHWORKS Advanced Server Files and On-Disk Structure 7         F.2 PATHWORKS Advanced Server On-Disk Structure   D               Figure F-1 PATHWORKS Advanced Server On-Disk Structure                           Diagram  *               pwrk$commonroot, pwrk$lmroot                 |                  |___lanman                 |e"                 |     ---.accounts#                 |     ---.datafiles                  |     ---.debugV!                 |     ---.domains                  |     ---.logs                 |     ---.repl!                 |     ---.samsave                   |     ---.shares!                 |     ---.upgradei                 |                  |___license                  |)                 |___logs                 |E                 |___params                 |                  |___perfdata                 |                  |___print_                 |e                 |___section                  |S                 |___spoolg                 |                  |___temp                          B         F-14 PATHWORKS Advanced Server Files and On-Disk Structure                       H                                                                        GH         ________________________________________________________________  H                                  PATHWORKS Advanced Server Logical Names      D               Table G-1 describes the logical names that are createdH               when you configure or start the PATHWORKS Advanced Server.    H               Table_G-1_PATHWORKS_Advanced_Server_Logical_Names_________  H               Logical_Name__________Description_________________________  D               PWRK$ACME_MODULE      System-specific external authen-D                                     tication software (either VAX or+                                     Alpha).   E               PWRK$ADDON_LIBRARY    Location of file system shareabler*                                     images  E               PWRK$COMMON           Top-level directory for PATHWORKSc3                                     Advanced Server_  B               PWRK$COMMONROOT[1]    Root of the PATHWORKS Advanced@                                     Server common directory tree  :               PWRK$CSSHR            Common services module  1               PWRK$KNBDAEMON_       TCP/IP device$               DEVICE  B               PWRK$LANMAN           PATHWORKS Advanced Server area  C               PWRK$LANMAN_STARTED   Indicates whether the PATHWORKS E                                     Advanced Server has been started.   E               PWRK$LICENSE          PATHWORKS Advanced Server license.(                                     area  H               PWRK$LMDATAFILES      PATHWORKS Advanced Server data files(                                     area  H               [1]This_logical_name_requires_that_you_specify_the________                  directory with it.  H                                                 (continued on next page)  H                              PATHWORKS Advanced Server Logical Names G-1           /         PATHWORKS Advanced Server Logical Namest    H               Table_G-1_(Cont.)_PATHWORKS_Advanced_Server_Logical_Names_  H               Logical_Name__________Description_________________________  F               PWRK$LMDEBUG          Area where trace files are written  D               PWRK$LMDOMAINS        PATHWORKS Advanced Server domain(                                     area  F               PWRK$LMLOGS           PATHWORKS Advanced Server log file(                                     area  B               PWRK$LMROOT[1]        Root of the PATHWORKS Advanced9                                     Server directory treeO  E               PWRK$LMUPGRADE        PATHWORKS Advanced Server upgrade (                                     area  E               PWRK$LMMSGFILES       PATHWORKS Advanced Server message .                                     files area  A               PWRK$LMREPLEXPORT     Export replication files area$  A               PWRK$LMREPLIMPORT     Import replication files area   <               PWRK$LMSAMSAVE        SAM database backup area  <               PWRK$LMSAMSAVEX       SAM database backup area  A               PWRK$LOADSTREAMS      Logical for LoadStreams image   8               PWRK$LOGS             Common log file area  2               PWRK$NETBEUI_DEVICE   NetBEUI device  2               PWRK$PARAMS           Parameter area  /               PWRK$PCFSDRIVER       PCFS driverv  .               PWRK$PCIDRIVER        PCI driver  F               PWRK$PERFDATA         PATHWORKS monitor performance data-                                     directoryH  E               PWRK$PRINT            PATHWORKS Advanced Server printer_6                                     database directory  E               PWRK$ROOT             Top-level directory for PATHWORKS 3                                     Advanced Server   H               PWRK$SHARED_IMAGES    Indicates whether shared images have/                                     been loaded   H               [1]This_logical_name_requires_that_you_specify_the________                  directory with it.  H                                                 (continued on next page)  3         G-2 PATHWORKS Advanced Server Logical Names     C      H                                  PATHWORKS Advanced Server Logical Names    H               Table_G-1_(Cont.)_PATHWORKS_Advanced_Server_Logical_Names_  H               Logical_Name__________Description_________________________  B               PWRK$STREAMSOS        System-specific streams images  D               PWRK$STREAMSSHR       System-specific streams sharable)                                     imageo  5               PWRK$SECTION          Section file area   .               PWRK$SPOOL            Spool area  G               PWRK$TEMP             Temporary PATHWORKS Advanced Server )                                     files$  H               PWRK$VERSION__________File_server_version_number__________                                                        H                              PATHWORKS Advanced Server Logical Names G-3                               E      ________________________________________________________________L  E                                                                 Index     A      A                                    Configuration procedure D      ___________________________           changing default settings5      Administrator account                    ,  3-13 D        password on, 3-7                    for Advanced Server,  3-1<      Alerter service                       preparing for theC        description of, 3-6                    Advanced Server,  3-3e>      alias,  3-7                           prerequisites,  3-3A      Automatic shutdown                    responding to prompts, 6        of file server, 5-7                    3-8, 4-4  <                                            sample script for@      B__________________________              PATHWORKS Advanced  :      BACKUP command,  1-11                    Server,  B-5<                                            sample script for@      C__________________________              standalone license:      Checklist                                server,  C-39        summary, A-1                        starting,  3-8_B      Client-based server                   starting server during,7         administration tools,                 3-8, 3-12u>         5-11                               starting standaloneD      Client software                          license server during,1        LAN Manager, 1-8                       4-6   +      Clusters                             DIE        See OpenVMS clusters               ___________________________ 3      Computer name,  3-7                  Data loss <        SCSNODE parameter and,              preventing,  1-11;          1-14                             DECnet (Phase IV)iA      Configuration (Advanced               checking status,  1-17n5         Server)                           DECnet-Plus A        description of, 3-4                 checking status,  1-17T?      Configuration Manager                DECnet transport, 1-8 9        running after                       running duringEB          configuration,  3-4                  configuration,  1-17  E                                                               Index-1  T  R            !         DECnet transport (cont'd) G          status of,  1-17                   G__________________________N  >         DECprint Supervisor                 GBLPAGES parameterD           software,  1-2                      checking and defining,5          installing,  1-3                        1-12WA         Deinstallation procedure            GBLSECTIONS parameter D          description of,  7-2                 checking and defining,5          guidelines for,  7-1                    1-13C         DeinstallingG          PATHWORKS Advanced Server          H__________________________ B             ,  7-2                          Hardware requirements,8          PATHWORKS for OpenVMS                 1-7, 1-10             (NetWare),  7-4          Device name, 2-3G         Disk space                          I__________________________   <          determining,  1-11                 Installation kit?          requirements,  1-11                  contents of,  2-2 C         Domain name, 3-6                    Installation procedure,   2                                                2-1B         E__________________________           description of,  2-1D         External authentication               files created by,  F-1@          network,  5-10                       interrupting,  2-7G          setting up OpenVMS                   logical names created by, 4             clusters,  5-9                       G-1A         External authentication               prerequisites,  2-3_@           software                            questions in,  2-6D          installing,  2-20                    responding to prompts,4          sample installation                     2-7?             script,  E-1                      sample script for H          separate installation,                  external authentication>             2-5                                  software, E-1?                                               sample script for C         F__________________________              PATHWORKS AdvancedW<         Files                                    Server, B-1?          created by installing                sample script for C             PATHWORKS Advanced                   standalone license <             Server,  F-1                         server, C-1G         File servers                          sample script for Upgrade =          NetWare,  1-2                           utility, D-2PG          starting,  5-3                       standalone license serverR6          stopping,  5-7                          , 4-1<                                               starting,  2-5           Index-2                  !         Installation Verification G           Procedure                         N__________________________H  C          See IVP                            NetBIOS name resolution E         IVP                                   using LMHOSTS for,  6-2 D          restriction when                     using WINS server for,4             installing Upgrade                   6-5B             utility only,  D-1              Netlogon service,  3-6:          running after                      NetWare serverG             installation,  5-3                See PATHWORKS for OpenVMS :          running automatically,                  (NetWare)=             2-15                            Network transport   @         K                                      requirements, 1-8  #         ___________________________AG         Kit contents                        O__________________________ G          checking,  1-10                    OpenVMS cluster alias,  3-7   <         L                                   OpenVMS clustersE         ___________________________           checking configuration, 4         License server, 3-5                      1-9B          configuration procedure,             cluster alias,  3-15H             4-1                               configuring nodes in,  3-2G          installation procedure,              disk device for PATHWORKS G             4-1                                  Advanced Server files,l4          standalone installation,                3-3D             2-4, 2-19                         installation in,  1-19D         Licensing                             loading client license=          requirements,  1-3                      PAKs on, 4-2 C         LMHOSTS                               loading PAKs on,  1-4 E          configuring to use,  6-2             PATHWORKS cluster alias 9          name resolution,  3-5                   for, 3-7YD         Logical names                         running license server=          created by PATHWORKS                    on, 1-4, 4-1 E             Advanced Server                   sample installation on, 4             installation,  G-1                   C-1?          startup procedure,  5-4              sample standaloneg  H                                                  configuration procedure6         M__________________________              , C-3  B         Memory requirements, 1-8              server role in,  3-7A                                               setting up externaleD                                                  authentication, 5-9F                                               starting server in,  5-6A                                               starting standaloneiC                                                  license server in,o4                                                  4-7  H                                                                  Index-3    e            C         OpenVMS clusters (cont'd)           PWRK$DEINSTAL procedures  @          WINS setup for,  6-5                 See Deinstallation:         Operating system                         procedure<           requirements,  1-8                PWVN$STARTUP.COMB         Optional software, 5-11               description of,  5-4  G         P__________________________         Q__________________________   9         Part listing                        Queue manager <          checking,  1-10                      running duringD         PATHWORKS Advanced Server                configuration, 1-16=          configuring,  3-1                    starting,  1-16t"          files installed for,  F-1G          installing,  2-2                   R__________________________eF          kit contents,  2-2                 Release notes,  1-11, 2-3,2          logical names,  G-1                   2-8E          sample deinstallation                in SYS$HELP: area,  1-6d<             procedure,  7-3                   printing,  1-6C          sample installation and            Required hardware,  1-7 C             configuration,  B-5             Required software,  1-8 8          starting,  5-5                     Requirements?          starting during                      disk space,  1-11_B             configuration,  3-8,              hardware,  1-7, 1-10=             3-12                              licensing,  1-3V:         PATHWORKS cluster alias,              memory,  1-8B           3-7                                 software,  1-8, 1-10         PATHWORKS for OpenVMS G           (NetWare),  1-2, 2-18             S__________________________ 3          removal procedure,  7-4            SCSNODEi8          sample deinstallation                name,  3-7C             procedure,  7-5                   parameter definition,_5         Post-installation tasks,                 1-14u2           5-1                               ServerF         Pre-installation tasks,               on-disk structure,  F-13G           2-3                               Server administration toolso?          checklist,  1-8                      installing,  5-11 D         PROCSECTCNT parameter               Server announce comment,2          checking and defining,                3-7G             1-13                            SHOW QUEUE/MANAGER command,A3         Product identifier, 2-3                1-16   >         PWRK$CONFIG procedure               Shutdown procedure  C          See Configuration                    for file server,  5-7o             procedure            Index-4_ m               :         Software requirements,              SYSMAN utilityA           1-8, 1-10                           using STARTUP,  5-7 :         Standalone license server,          SYSTEM accountB           1-4, 4-1                            logging in to,  1-107          sample installation and            System diskp@             configuration procedure           changing the,  3-3>             ,  C-1                            space needed forC          starting during                         installation, 1-11aB             configuration,  4-6               specifying the,  3-3=          startup,  4-6                      System parameters D         Starting                              checking and defining,5          PATHWORKS Advanced Server               1-12r;             ,  5-5                          System shutdown G          PATHWORKS Advanced Server            file server shutdown and, 4             automatically,  5-6                  5-7:          PATHWORKS Advanced Server          System startupC             during configuration,             troubleshooting,  5-4 ?             3-8                             System startup fileu;          PATHWORKS Advanced Server            editing,  5-6   -             in OpenVMS clusters,            T_G             5-6                             ____________________________>          PATHWORKS Advanced Server          Task summary,  A-18             manually,  5-5                  TCP/IP,  1-8>          standalone license server            status of,  1-18>             ,  4-6                          Timesource serviceB          standalone license server            description of,  3-65             automatically,  4-7             Time zonerE          standalone license server            checking setting,  1-16 <             during configuration,           Transports,  3-4>             4-6                               selecting duringC          standalone license server               configuration, 3-4e  -             in a cluster,  4-7              UvG          standalone license server          ___________________________KA             manually,  4-7                  Upgrade utility,  D-1aF         START/QUEUE/MANAGER command         Upgrading PATHWORKS V5 forE           ,  1-16                              OpenVMS (LAN Manager),O3         STARTUP                                2-19              in SYSMAN utility,  5-7         Startup procedureK          for file server,  5-4         SYLOGIN.COM           conditionalizing,  5-4   H                                                                  Index-5 e  r            >                                               See Installation:         V__________________________              procedure           VMSINSTAL procedure G                                             W__________________________   =                                             Wide area domains >                                               setting up,  6-1=                                             Windows NT servereC                                                administration toolsd?                                               installing,  5-11 0                                             WINSF                                               configuring to use,  6-5?                                               setup for OpenVMS >                                                  clusters, 6-5                                                                     Index-6                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               