       H                     HP DECwindows Motif for OpenVMS_____________________&                     Installation Guide  -                     Order Number: BA402-90003                          July 2006   F                     This manual provides step-by-step instructions forG                     installing the DECwindows Motif for OpenVMS Version !                     1.6 software.               H                     Revision/Update Information:  This manual supersedesI                                                   the HP DECwindows Motif C                                                   for OpenVMS Alpha D                                                   Installation GuideB                                                   for Version 1.5.  I                     Operating Systems:            OpenVMS I64 Version 8.3   G                                                   OpenVMS Alpha Version 5                                                   8.3   F                     Software Versions:            DECwindows Motif forI                                                   OpenVMS I64 Version 1.6   F                                                   DECwindows Motif forG                                                   OpenVMS Alpha Version 5                                                   1.6                       +                     Hewlett-Packard Company )                     Palo Alto, California                  J           ________________________________________________________________  D            Copyright 2006 Hewlett-Packard Development Company, L.P.  ?           Confidential computer software. Valid license from HP B           required for possession, use or copying. Consistent with>           FAR 12.211 and 12.212, Commercial Computer Software,A           Computer Software Documentation, and Technical Data for D           Commercial Items are licensed to the U.S. Government under/           vendor's standard commercial license.   ?           The information contained herein is subject to change A           without notice. The only warranties for HP products and C           services are set forth in the express warranty statements A           accompanying such products and services. Nothing herein E           should be construed as constituting an additional warranty. E           HP shall not be liable for technical or editorial errors or %           omissions contained herein.   C           Intel and Itanium are trademarks or registered trademarks @           of Intel Corporation or its subsidiaries in the United%           States and other countries.   :           Java is a US trademark of Sun Microsystems, Inc.  ;           UNIX is a registered trademark of The Open Group.   C           The X device is a trademark of X/Open Company Ltd. in the !           UK and other countries.              Printed in the US   E                                                                ZK6434   @           The DECwindows Motif documentation set is available on           CD-ROM.                                  C   _________________________________________________________________   C                                                            Contents       C   Preface...................................................    vii   &   1  Preparing to Install the Software  C         1.1   Hardware and Memory Requirements..............    1-2 C         1.2   Required Operating System Software............    1-2 C         1.3   License Requirements..........................    1-5 C         1.3.1     For OpenVMS Alpha Systems.................    1-5 C         1.3.2     For OpenVMS I64 Systems...................    1-6 4         1.4   Saving OSF/Motif Release 1.1.3 and XUIC               Programming Files.............................    1-6 C         1.5   Saving Customized Bookreader Files............    1-7 C         1.6   Installation Procedure Requirements...........    1-8 C         1.6.1     Process Account Quotas....................    1-8 C         1.6.2     Disk Space................................    1-9 C         1.6.3     System Parameters.........................   1-13 C         1.6.4     Backing Up Your System Disk...............   1-16 C         1.6.5     Notifying Other Users.....................   1-17   7   2  Using the POLYCENTER Software Installation Utility   C         2.1   Accessing Help Information....................    2-3 9         2.2   Extracting and Printing the Product Release C               Notes.........................................    2-3 C         2.3   Installing the DECwindows Motif Software......    2-4 C         2.3.1     Starting the Installation.................    2-4 C         2.3.2     The Installation Dialog...................    2-5 6         2.3.2.1     Saving the Programming EnvironmentC                     (Alpha Only)............................    2-7 C         2.3.2.2     Default Installation....................    2-9 C         2.3.2.3     LBX Proxy Installation..................    2-9 4         2.3.2.4     Selecting Installation of ClientC                     Software................................    2-9   C                                                                 iii                    E           2.3.2.5     Asking About Selecting a Desktop........   2-10 E           2.3.2.6     Programming Language Support Options....   2-11 E           2.3.2.7     Translated Image Support (Alpha Only)...   2-12 E           2.3.2.8     Language Variants Notice................   2-12 E           2.3.2.9     Reviewing the Installation Options......   2-13 E           2.3.2.10    Execution Dialog........................   2-14 8           2.3.2.11    Verifying DECwindows Motif SupportE                       Files...................................   2-14 E           2.3.2.12    Reviewing Final Installation Notes......   2-16 E           2.4   Recovering from Errors........................   2-16 E           2.5   Adjusting Parameters After Installation.......   2-18   $     3  After Installing the Software  E           3.1   Starting the DECwindows Motif Software........    3-1 E           3.2   Running the IVP...............................    3-2 E           3.2.1     Starting the Procedure....................    3-2 E           3.2.2     Display-Oriented Tests....................    3-3 E           3.2.3     LBX Proxy Tests...........................    3-5 E           3.2.4     Nondisplay-Oriented Tests.................    3-7 E           3.3   Choosing a Console............................    3-7 E           3.3.1     On OpenVMS Alpha Systems..................    3-7 E           3.3.2     On OpenVMS I64 Systems....................    3-8 E           3.4   Selecting the Desktop.........................    3-8 E           3.5   System Maintenance Procedures.................    3-9 :           3.5.1     Checking a System Parameter Value withE                     SYSGEN....................................    3-9 9           3.5.2     Calculating the Number of Free Global E                     Pages and Global Sections.................   3-10 E           3.5.3     Setting the Size of the Page File.........   3-10 >           3.5.4     Changing System Parameter Values Using theE                     AUTOGEN Utility...........................   3-11   )     4  Managing DECwindows Motif Software   ;           4.1   Customizing the DECwindows X Display Server E                 Startup Procedure.............................    4-1 E           4.2   Adding DECwindows Base-Support Files..........    4-2 E           4.3   Determining and Reporting Problems............    4-2                  iv                   :         A  POLYCENTER Software Installation Utility Sample            Installation   >               A.1   Sample PCSI Installation on an OpenVMS I64I                     System........................................    A-1 @               A.2   Sample PCSI Installation on an OpenVMS AlphaI                     System........................................    A-5   3         B  Software Components and Version Checking   I               B.1   Obtaining a List of Installed Components......    B-1 I               B.2   Checking the Version of Installed Images......    B-2   
         Index              Examples  =               A-1       Sample Installation of the DECwindows @                         Motif Software on an OpenVMS I64 VersionI                         8.3 System................................    A-1   >               A-2       Sample Upgrade of the DECwindows Motif@                         Software on an OpenVMS Alpha Version 8.3I                         System....................................    A-5            Tables  <               1-1       DECwindows Motif Support Options forI                         OpenVMS...................................    1-3   A               1-2       Directories for Previous XUI or OSF/Motif I                         Programming Environments..................    1-6   ;               1-3       Process Quotas for the Installation @                         Account on OpenVMS I64 and OpenVMS AlphaI                         Systems...................................    1-8   <               1-4       Required Disk Space by Component forI                         OpenVMS I64 Systems (in Blocks)...........   1-10   <               1-5       Required Disk Space by Component forI                         OpenVMS Alpha Systems (in Blocks).........   1-12   @               1-6       Minimum Required System Parameter ValuesI                         for OpenVMS I64 Systems...................   1-14   @               1-7       Minimum Required System Parameter ValuesI                         for OpenVMS Alpha Systems.................   1-15   I                                                                         v                              I         _________________________________________________________________   I                                                                   Preface                Intended Audience   I               This manual is intended for anyone who plans to install the E               HP DECwindows Motif for OpenVMS Version 1.6 (DECwindows A               Motif) software on the OpenVMS I64 or OpenVMS Alpha                platform.            Document Structure  I               This manual contains the following chapters and appendixes:   B               o  Chapter 1 discusses how to prepare for installing+                  DECwindows Motif software.   D               o  Chapter 2 discusses how to install DECwindows MotifD                  using the POLYCENTER Software Installation utility.  I               o  Chapter 3 provides startup procedures. This chapter also F                  includes a sample Installation Verification Procedure                  (IVP).   E               o  Chapter 4 discusses customizing the environment, and "                  reporting errors.  I               o  Appendix A presents sample DECwindows Motif installation F                  procedures using the POLYCENTER Software Installation                   (PCSI) utility.  H               o  Appendix B shows how to obtain a list of the DECwindowsF                  Motif software components as well as how to check the<                  versions of images installed on the system.      I                                                                       vii                         Related Documents   A           In addition to this manual, the following documents are ?           useful when installing the DECwindows Motif software:   9           o  HP DECwindows Motif for OpenVMS New Features   :           o  HP DECwindows Motif for OpenVMS Release Notes  1           o  Getting Started With the New Desktop   =           o  HP DECwindows Motif for OpenVMS Management Guide   /           o  HP OpenVMS System Manager's Manual   D           o  HP OpenVMS System Management Utilities Reference Manual  @           For additional information about OpenVMS or DECwindowsD           Motif products and services, visit the following web site:  &           http://www.hp.com/go/openvms       Reader's Comments   ?           HP welcomes your comments on this manual. Please send 8           comments to either of the following addresses:  '           Internet    openvmsdoc@hp.com   -           Mail        Hewlett-Packard Company :                       OSSG Documentation Group, ZKO3-4/U08(                       110 Spit Brook Rd.+                       Nashua, NH 03062-2698   )     How To Order Additional Documentation   7           For information about how to order additional D           documentation, visit the following World Wide Web address:  0           http://www.hp.com/go/openvms/doc/order       Conventions   @           The following product names may appear in this manual:  B           o  HP OpenVMS Industry Standard 64 for Integrity servers             o  OpenVMS I64             o  I64       viii                   E               All three names-the longer form and the two abbreviated H               forms-refer to the version of the OpenVMS operating system:               that runs on the Intel Itanium architecture.  F               All uses of DECwindows and DECwindows Motif refer to theI               HP DECwindows Motif for OpenVMS software; and all uses of X H               server and X display server refer to the HP DECwindows X11F               Display Server. Additionally, all uses of DECwindows XUII               (X User Interface) refer to the DECwindows product prior to +               DECwindows Motif Version 1.0.   G               The following typographic conventions may be used in this                manual:   G               Ctrl/x           A sequence such as Ctrl/x indicates that F                                you must hold down the key labeled CtrlH                                while you press another key or a pointing-                                device button.   D               <Return>         In examples, a key name enclosed in aD                                box indicates that you press a key onH                                the keyboard. (In text, a key name is not2                                enclosed in a box.)  I                                In the HTML version of this document, this E                                convention appears as brackets, rather *                                than a box.  <                . . .           Horizontal ellipsis points inE                                examples indicate one of the following -                                possibilities:   D                                o  Additional optional arguments in a>                                   statement have been omitted.  D                                o  The preceding item or items can be=                                   repeated one or more times.   I                                o  Additional parameters, values, or other =                                   information can be entered.   D               .                Vertical ellipsis points indicate theD               .                omission of items from a code exampleG               .                or command format; the items are omitted D                                because they are not important to the5                                topic being discussed.   I                                                                        ix                      :           ( )              In command format descriptions,E                            parentheses indicate that you must enclose C                            the choices in parentheses if you choose )                            more than one.   C           [ ]              In command format descriptions, brackets >                            indicate optional elements. You canC                            choose one, none, or all of the options. B                            (Brackets are not optional, however, in?                            the syntax of a directory name in an ?                            OpenVMS file specification or in the A                            syntax of a substring specification in 4                            an assignment statement.)  C           |                In command format descriptions, vertical @                            bars separating items inside bracketsA                            indicate that you choose one, none, or 8                            more than one of the options.  A           { }              In command format descriptions, braces E                            surround a required choice of options; you A                            must choose one of the options listed.   9           text style       This text style represents the A                            introduction of a new term or the name E                            of an argument, an attribute, or a reason.   E                            In the HTML version of this document, this =                            convention appears as italic text.   :           italic text      Italic text indicates important:                            information, complete titles ofC                            manuals, or variables. Variables include E                            information that varies in system messages >                            (Internal error number), in commandA                            lines (/PRODUCER=name), and in command B                            parameters in text (where dd representsD                            the predefined code for the device type).  B           UPPERCASE TEXT   Uppercase text indicates a command, theD                            name of a routine, the name of a file, orC                            the abbreviation for a system privilege.          x                      I               Monospace type   Monospace type indicates code examples and ;                                interactive screen displays.   G                                In the C programming language, monospace D                                type in text identifies the following?                                elements: keywords, the names of H                                independently compiled external functions?                                and files, syntax summaries, and E                                references to variables or identifiers 8                                introduced in an example.  F               -                A hyphen at the end of a command formatF                                description, command line, or code lineF                                indicates that the command or statement?                                continues on the following line.   D               numbers          All numbers in text are assumed to beI                                decimal unless otherwise noted. Nondecimal H                                radixes-binary, octal, or hexadecimal-are4                                explicitly indicated.                                                I                                                                        xi                          I                                                                         1 I         _________________________________________________________________   I                                         Preparing to Install the Software     D               This chapter describes the requirements for installingE               DECwindows Motif software using the POLYCENTER Software *               Installation (PCSI) utility.  C               Before you can install and configure DECwindows Motif I               software, you must have the required version of the OpenVMS G               operating system, sufficient memory, and a license. Also, H               if this is a system upgrade, you may need to take steps toG               preserve OSF/Motif Release 1.1.3 programming files or any *               customized Bookreader files.  9               This chapter includes the following topics:   >               o  Section 1.1, Hardware and Memory Requirements  @               o  Section 1.2, Required Operating System Software  2               o  Section 1.3, License Requirements  D               o  Section 1.4, Saving OSF/Motif Release 1.1.3 and XUI"                  Programming Files  @               o  Section 1.5, Saving Customized Bookreader Files  A               o  Section 1.6, Installation Procedure Requirements   F                 ________________________ Note ________________________  @                 HP strongly recommends that you read the releaseB                 notes before proceeding with the installation. SeeB                 Section 2.2 for instructions on how to access this                 information.  F                 ______________________________________________________    I                                                                       1-1            %     Preparing to Install the Software (     1.1 Hardware and Memory Requirements    (     1.1 Hardware and Memory Requirements  B           DECwindows Motif for OpenVMS Version 1.6 software can beA           installed on any processor supported by OpenVMS Version A           8.3. For a complete list of supported hardware, see the D           OpenVMS and DECwindows Motif Software Product Descriptions           (SPDs).   C           On OpenVMS Alpha systems, a minimum of 64 MB of memory is D           required; at least 128 MB of memory is highly recommended.  A           On OpenVMS I64 systems, the minimum amount of memory is @           dependent upon the specific Integrity Server platform.>           In general for DECwindows Motif, 512 MB of memory isB           recommended. Refer to the supported platform list in the5           OpenVMS SPD for more specific requirements.   *     1.2 Required Operating System Software  ?           The DECwindows Motif for OpenVMS Version 1.6 software @           requires that the OpenVMS Version 8.3 operating system           be installed.   >           If your system is not running a supported version ofA           OpenVMS before you attempt to install DECwindows Motif, !           the installation fails.   >           The OpenVMS operating system provides two subsets ofC           components to support DECwindows Motif. To use DECwindows B           Motif software, your system must be running a version ofD           the OpenVMS system that includes the following components,$           as described in Table 1-1.                               1-2            I                                         Preparing to Install the Software I                                    1.2 Required Operating System Software     I               Table_1-1_DECwindows_Motif_Support_Options_for_OpenVMS_____   I               Option____________Description______________________________   E               DECwindows        This component is required to install F               Motif network     DECwindows Motif and to run DECwindows>               transport and     Motif applications. During theI               base system       installation of OpenVMS, you are prompted F               support           to specify whether you want to install,                                 this option.  D                                 To determine whether this option wasD                                 installed during the installation ofG                                 OpenVMS, check for the existence of the /                                 following file:   E                                 SYS$LIBRARY:DECW$TRANSPORT_COMMON.EXE   I                                 See Section 4.2 for information on adding C                                 DECwindows base support files after ;                                 OpenVMS has been installed.   I                                                  (continued on next page)                                             I                                                                       1-3            %     Preparing to Install the Software *     1.2 Required Operating System Software    @           Table 1-1 (Cont.) DECwindows Motif Support Options forE           __________________OpenVMS__________________________________   E           Option____________Description______________________________   B           DECwindows X11    This component is necessary to display@           Display Server,   DECwindows Motif applications or any?           fonts, and        other X Window applications on your >           device drivers    system. During the installation of@                             OpenVMS, you are prompted to specifyD                             whether you want to install this option.  @                             To determine whether this option was@                             installed during the installation ofC                             OpenVMS, check for the existence of the +                             following file:   ;                             SYS$SYSTEM:DECW$SERVER_MAIN.EXE   ?                             If the DECW$SERVER_MAIN.EXE file is B                             not on your system, you cannot display>                             DECwindows Motif or other X WindowE                             applications on your local system[1]. The C                             DECwindows Motif installation procedure A                             asks whether you want to continue the E                             installation without workstation support.   E                             See Section 4.2 for information on adding C                             DECwindows device support after OpenVMS /                             has been installed. E           [1]If_this_component_is_not_installed_locally,_note_that___   @           you can run DECwindows Motif applications and redirect=           their display to a remote system that does have the 2           DECwindows X11 Display Server installed.E           ___________________________________________________________                        1-4            I                                         Preparing to Install the Software I                                                  1.3 License Requirements               1.3 License Requirements  D               You must register and load your license for DECwindows@               Motif before you run the Installation Verification3               Procedure (IVP) and use the software.   I               To register a license using the License Management Facility B               (LMF), log into the system manager account (SYSTEM).F               Then choose one of the following options to register the               license:  I               o  Invoke the SYS$UPDATE:VMSLICENSE.COM procedure. When the I                  procedure prompts you for information, respond with data '                  from your License PAK.   F               o  At the DCL prompt, enter the LICENSE REGISTER commandC                  with the appropriate qualifiers that correspond to )                  License PAK information.   G               If you plan to use DECwindows Motif software on more than D               one node in a OpenVMS Cluster, load the license on the?               other nodes after you complete this installation.   C               If you are installing DECwindows Motif software as an C               update on a node or cluster already licensed for this B               software, you have already completed the License PAK(               registration requirements.  B               For complete information about using LMF, see the HP8               OpenVMS License Management Utility Manual.  B               The following sections describe additional platform-,               specific license requirements.  '         1.3.1 For OpenVMS Alpha Systems   B               Before you install and run DECwindows Motif softwareA               on a newly licensed node or cluster, you must first I               register a DW-MOTIF License PAK or another License PAK that E               includes support for the DECwindows Motif product (such E               as, NET-APP-SUP-150). The License PAK is provided along I               with the kit if you ordered the license and media together; I               otherwise, it is provided separately to a location based on !               your license order.   I                                                                       1-5            %     Preparing to Install the Software      1.3 License Requirements    !     1.3.2 For OpenVMS I64 Systems   ?           Before you install the DECwindows Motif software, you A           must have first registered a license for an OpenVMS I64 A           Operating Environment (OE) that includes the DECwindows ;           Motif layered product. See the HP OpenVMS I64 and B           DECwindows Motif SPDs for a complete list of the OpenVMSD           I64 OEs that include the DECwindows Motif layered product.  @     1.4 Saving OSF/Motif Release 1.1.3 and XUI Programming Files  >           The X Window System and OSF/Motif libraries that areB           provided with DECwindows Motif software are incompatibleC           with those libraries provided with versions of DECwindows ?           Motif prior to Version 1.2. Run-time compatibility is @           preserved, but the earlier OSF/Motif Release 1.1.3 andB           XUI programming environments are not compatible with the>           later OSF/Motif Release 1.2 programming environment.  D           Programming support in the XUI and OSF/Motif Release 1.1.3@           environments that was provided in previous versions ofC           DECwindows Motif is no longer supported in the DECwindows @           Motif product. The DECwindows Motif Alpha installation>           procedure gives you the option of saving the XUI andD           OSF/Motif Release 1.1.3 programming files if they exist onE           your system. If you choose to save these programming files, D           they are moved to subdirectories where you can access themB           for future use. Specifically, the installation procedureA           creates a subdirectory called [.DECW$113] under each of @           the directories listed in Table 1-2. It then moves the@           Release 1.1.3 programming files into the newly created           subdirectories.   C     Table 1-2 Directories for Previous XUI or OSF/Motif Programming E     __________Environments___________________________________________   E     Directory_____Contents____New_Location___________________________   A     DECW$INCLUDE  C header    SYS$SYSROOT:[DECW$INCLUDE.DECW$113]                    files   ;     SYS$SYSTEM    UIL         SYS$SYSROOT:[SYSEXE.DECW$113]                    compiler  E                                              (continued on next page)        1-6            I                                         Preparing to Install the Software I              1.4 Saving OSF/Motif Release 1.1.3 and XUI Programming Files     C         Table 1-2 (Cont.) Directories for Previous XUI or OSF/Motif I         __________________Programming_Environments_______________________   I         Directory_____Contents____New_Location___________________________   ?         SYS$LIBRARY   Non-C       SYS$SYSROOT:[SYSLIB.DECW$113]                        languageI         ______________bindings___________________________________________   F                 ________________________ Note ________________________  D                 For additional information about accessing and usingB                 the saved programming files, see the HP DECwindows0                 Motif for OpenVMS Release Notes.  F                 ______________________________________________________  .         1.5 Saving Customized Bookreader Files  5               The installation procedure replaces the 1               Bookreader bookshelf settings file, E               SYS$SYSROOT:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF, with the                default version.  G               If you customized this file and want to save it, copy the G               file to another directory or rename the file prior to the I               installation of DECwindows Motif software so that it is not                deleted.  G               To copy your customized file to another directory, create B               the directory and define a global symbol in the file*               DECW$PRIVATE_APPS_SETUP.COM.  5               To create a Bookreader directory called H               SYS$COMMON:[DECW$BOOK_LOCAL], perform the following steps:  E               1. Create the directory and assign world read access as                   follows:   8                  $ CREATE/DIRECTORY/PROTECTION=WORLD:R -0                  _$ SYS$COMMON:[DECW$BOOK_LOCAL]  @               2. Copy the LIBRARY.DECW$BOOKSHELF file to the new&                  directory as follows:  G                  $ COPY SYS$SYSROOT:[DECW$BOOK]LIBRARY.DECW$BOOKSHELF - 5                  _$ SYS$COMMON:[DECW$BOOK_LOCAL]*/LOG   I                                                                       1-7            %     Preparing to Install the Software *     1.5 Saving Customized Bookreader Files    >           3. If the SYS$MANAGER directory does not contain the?              DECW$PRIVATE_APPS_SETUP.COM command file, copy the 8              template file to a command file as follows:  B              $ COPY SYS$MANAGER:DECW$PRIVATE_APPS_SETUP.TEMPLATE -;              _$ SYS$MANAGER:DECW$PRIVATE_APPS_SETUP.COM/LOG   A           4. Edit the DECW$PRIVATE_APPS_SETUP.COM file and define D              the global symbol DECW$BOOK to point to your Bookreader@              directory by adding the following line to the file:  :              $ DECW$BOOK == "SYS$COMMON:[DECW$BOOK_LOCAL]"  D           5. Restart DECwindows Motif using the following command ifB              you performed step 4 after installing the product andD              after DECwindows had been started (for example, after a              reboot):   0              $ @SYS$MANAGER:DECW$STARTUP RESTART  @           For more information about customizing your DECwindows@           Motif environment, see HP DECwindows Motif for OpenVMS           Management Guide.   +     1.6 Installation Procedure Requirements   D           This section discusses the requirements for installing the/           DECwindows Motif software using PCSI.         1.6.1 Process Account Quotas  A           Use the following table to determine the minimum quotas 1           required by the installation procedure.   B           Table 1-3 Process Quotas for the Installation Account onE           __________OpenVMS_I64_and_OpenVMS_Alpha_Systems____________   E           Quota_Name__Value__________________________________________              ASTLM           250              BIOLM           150              BYTLM        64,000              DIOLM           150              ENQLM         2,000   E                                              (continued on next page)        1-8            I                                         Preparing to Install the Software I                                   1.6 Installation Procedure Requirements     C               Table 1-3 (Cont.) Process Quotas for the Installation H                                 Account on OpenVMS I64 and OpenVMS AlphaI               __________________Systems__________________________________   I               Quota_Name__Value__________________________________________   I               FILLM___________100________________________________________   D               Use the OpenVMS AUTHORIZE utility to verify and changeE               process quotas for the installation account in the user H               authorization file (UAF). (Some sites may restrict the useE               of the AUTHORIZE utility to certain accounts or users.) I               For example, to change the BYTLM quota for the account-name A               installation account, enter the following commands:   &               $ SET DEFAULT SYS$SYSTEM               $ RUN AUTHORIZE $               UAF> SHOW account-name5               UAF> MODIFY account-name /BYTLM = 64000 $               UAF> SHOW account-name               UAF> EXIT                $ LOGOUT  G               After you change the quotas for the installation account, F               log out of the installation account and log in again forF               the new quotas to take effect. You can then proceed with               the installation.   8               User account quotas are stored in the fileI               SYS$SYSTEM:SYSUAF.DAT. For more information about modifying B               account quotas, see the description of the AUTHORIZEC               utility in the HP OpenVMS System Management Utilities                Reference Manual.            1.6.2 Disk Space  D               Use the table appropriate for your operating system toF               determine the amount of free disk space that is requiredH               on the system disk to install DECwindows Motif components.D               However, because you can choose not to install all theI               components, your actual disk space requirement may be less.   H               To determine the number of free blocks on the system disk,<               enter the following command at the DCL prompt:  )               $ SHOW DEVICE SYS$SYSDEVICE   I                                                                       1-9            %     Preparing to Install the Software +     1.6 Installation Procedure Requirements     B           The installation procedure checks for free disk space onD           the system disk. If sufficient space is not available, the@           installation procedure provides the following options:  *           o  Install fewer optional files.  D           o  Terminate the installation, create more free disk space>              on the system disk, and restart the installation.  C           o  Continue the installation and risk running out of disk               space.   C              ________________________ Note ________________________   9              If you run out of free disk space during the <              installation, the installation procedure fails.  C              ______________________________________________________   D           Table 1-4 Required Disk Space by Component for OpenVMS I64E           __________Systems_(in_Blocks)______________________________   E           Component/Subcomponent___Requirement_Subtotals___Totals____   B           Installation overhead:    40,000[1]   40,000      40,000  B           LBX support:               1,020       1,020       1,020             Client software:  6               Client base kit      114,970     114,970                 Desktop support   *                   New Desktop       63,510  *                   DECwindows        13,600                   desktop   *                   Manual pages       2,810                   for                    New Desktop   6                   Desktop                       79,920                   subtotal  E           [1]Includes_excess_disk_space_allocation_(dependent_on_____   ?           disk cluster size), PCSI overhead, and log files. The A           value shown is for the combined installation of LBX and            the client software.  E                                              (continued on next page)        1-10           I                                         Preparing to Install the Software I                                   1.6 Installation Procedure Requirements     D               Table 1-4 (Cont.) Required Disk Space by Component forI               __________________OpenVMS_I64_Systems_(in_Blocks)__________   I               Component/Subcomponent___Requirement_Subtotals___Totals____                      Programming                    environment   .                       C, C++             8,970  .                       FORTRAN            2,080  .                       Pascal             3,060  .                       New Desktop          150  :                       Programming                   14,260                       subtotal  "                   Example programs  .                       Sound examples     1,670  .                       Programming       12,290                       examples  .                       New Desktop        1,250                       examples  :                       Examples                      15,210                       subtotal  F                   Client total                                 224,360  F               Total for all                                    265,380I               components:________________________________________________                   I                                                                      1-11            %     Preparing to Install the Software +     1.6 Installation Procedure Requirements     @           Table 1-5 Required Disk Space by Component for OpenVMSE           __________Alpha_Systems_(in_Blocks)________________________   E           Component/Subcomponent___Requirement_Subtotals___Totals____   B           Installation overhead:    40,000[1]   40,000      40,000  B           LBX support:                 450         450         450             Client software:  6               Client base kit       57,030      57,030                 Desktop support   *                   New Desktop       43,410  *                   DECwindows         7,870                   desktop   *                   Manual pages       2,810                   for                    New Desktop   6                   Desktop                       54,090                   subtotal                 Programming                environment   *                   C, C++             7,910  *                   FORTRAN            2,080  *                   Pascal             3,060  *                   New Desktop          150  6                   Programming                   13,200                   subtotal                 Example programs  *                   Sound examples     1,550  *                   Programming       10,290                   examples  *                   New Desktop        1,250                   examples  E           [1]Includes_excess_disk_space_allocation_(dependent_on_____   ?           disk cluster size), PCSI overhead, and log files. The A           value shown is for the combined installation of LBX and            the client software.  E                                              (continued on next page)        1-12           I                                         Preparing to Install the Software I                                   1.6 Installation Procedure Requirements     D               Table 1-5 (Cont.) Required Disk Space by Component forI               __________________OpenVMS_Alpha_Systems_(in_Blocks)________   I               Component/Subcomponent___Requirement_Subtotals___Totals____   :                       Examples                      13,090                       subtotal  :                   Translated image      28,330      28,330                   support   F                   Client total                                 165,740  F               Total for all                                    206,190I               components:________________________________________________            1.6.3 System Parameters   C               Use the table appropriate to your operating system to G               determine the minimum recommended system parameter values A               for running DECwindows. The DECwindows installation A               supplies a NEWPARAMS.DAT file which AUTOGEN uses as C               input for its CLU$PARAMS.DAT file. The CLU$PARAMS.DAT F               file captures system parameter requirements from layeredE               products that use the NEWPARAMS.DAT method of supplying E               their system parameter requirements to AUTOGEN. In most C               cases, this process eliminates the need to modify the !               MODPARAMS.DAT file.   A               Depending on the kinds of programs and applications @               running at your site, you might need higher valuesA               for some settings. If you need higher settings, you A               should modify the MODPARAMS.DAT file before running D               the AUTOGEN procedure. See the HP DECwindows Motif forC               OpenVMS Management Guide for additional system tuning                recommendations.                  I                                                                      1-13            %     Preparing to Install the Software +     1.6 Installation Procedure Requirements     @           Table 1-6 Minimum Required System Parameter Values forE           __________OpenVMS_I64_Systems______________________________              SystemE           Parameter________Value_____________________________________   '           GBLSECTIONS          1,000[1]   '           GBLPAGES           150,000[1]   $           GBLPAGFIL            4,096  $           SWPOUTPGCNT            512  $           MAXBUF               8,192  $           CHANNELCNT             255  $           PROCSECTCNT             64  $           PQL_MASTLM             100  $           PQL_MBIOLM             100  $           PQL_MBYTLM         100,000  $           PQL_MDIOLM             100  $           PQL_MENQLM             300  $           PQL_MFILLM             100  $           PQL_MPRCLM              10  $           PQL_MWSDEFAULT       4,096  $           PQL_MWSQUOTA         8,192  $           PQL_MWSEXTENT       16,384  $           CLISYMTBL              512  $           GH_RES_CODE          3,072  $           IMGREG_PAGES        10,000E           [1]If_you_have_installed_other_software_that_uses_global___   C           pages or global sections, you might need a higher minimum ?           value. When you boot your system and DECwindows Motif A           starts, the values of free GBLPAGES and GBLSECTIONS are @           checked for your system. If you do not have sufficient=           values for GBLPAGES and GBLSECTIONS, the DECwindows A           Motif startup procedure prints a warning and provides a 1           recommended value for these parameters.   E                                              (continued on next page)        1-14           I                                         Preparing to Install the Software I                                   1.6 Installation Procedure Requirements     H               Table 1-6 (Cont.) Minimum Required System Parameter ValuesI               __________________for_OpenVMS_I64_Systems__________________                  SystemI               Parameter________Value_____________________________________   (               WINDOW_SYSTEM            1  (               NPAGEDYN         4,194,304  (               PAGEDYN          4,194,304  I               WSMAX______________131,072_________________________________   D               Table 1-7 Minimum Required System Parameter Values forI               __________OpenVMS_Alpha_Systems____________________________                  SystemI               Parameter________Value_____________________________________   +               GBLSECTIONS            600[1]   +               GBLPAGES           150,000[1]   (               GBLPAGFIL            4,096  (               SWPOUTPGCNT            512  (               MAXBUF               8,192  (               CHANNELCNT             255  (               PROCSECTCNT            128  (               PQL_MASTLM             100  (               PQL_MBIOLM             100  (               PQL_MBYTLM         100,000  (               PQL_MDIOLM             100  (               PQL_MENQLM             300  I               [1]If_you_have_installed_other_software_that_uses_global___   G               pages or global sections, you might need a higher minimum C               value. When you boot your system and DECwindows Motif E               starts, the values of free GBLPAGES and GBLSECTIONS are D               checked for your system. If you do not have sufficientA               values for GBLPAGES and GBLSECTIONS, the DECwindows E               Motif startup procedure prints a warning and provides a 5               recommended value for these parameters.   I                                                  (continued on next page)   I                                                                      1-15            %     Preparing to Install the Software +     1.6 Installation Procedure Requirements     D           Table 1-7 (Cont.) Minimum Required System Parameter ValuesE           __________________for_OpenVMS_Alpha_Systems________________              SystemE           Parameter________Value_____________________________________   $           PQL_MFILLM             100  $           PQL_MPRCLM              10  $           PQL_MWSDEFAULT       1,024  $           PQL_MWSQUOTA         2,048  $           PQL_MWSEXTENT        8,192  $           CLISYMTBL              512  $           GH_RES_CODE          1,584  $           IMGREG_PAGES        10,000  $           WINDOW_SYSTEM            1  $           NPAGEDYN         1,348,576  $           PAGEDYN            704,288  E           WSMAX_______________12,000_________________________________   D              _______________________ CAUTION _______________________  :              If you do not ensure that your system has theA              necessary number of global pages and global sections <              for the installation, the DCL tables can become              corrupted.   C              ______________________________________________________   %     1.6.4 Backing Up Your System Disk   D           HP recommends that you back up your system disk before youE           install any software. At the beginning of the installation, E           the installation procedure asks whether your system disk is C           backed up. Use the backup procedures that are established B           at your site. For details about performing a system diskA           backup, see the section on the Backup utility in the HP ?           OpenVMS System Management Utilities Reference Manual.        1-16           I                                         Preparing to Install the Software I                                   1.6 Installation Procedure Requirements     #         1.6.5 Notifying Other Users   C               Inform users on the system that you plan to install a I               product and that they must log out during the installation. F               To make sure that you are the only user logged in to the)               system, follow these steps:   E               1. Notify current users to log out. Enter the following +                  command at the DCL prompt:   M                  $ REPLY/ALL/BELL/SHUTDOWN "Log out for the installation of - K                  _$ HP DECwindows Motif for OpenVMS, Version 1.6 please..."   I               2. Enter the following command at the DCL prompt to prevent C                  nonprivileged users from logging in to the system:   +                  $ SET LOGINS/INTERACTIVE=0   I               If possible, give users an estimated time when they can log %               in to the system again.                                                   I                                                                      1-17                          I                                                                         2 I         _________________________________________________________________   I                        Using the POLYCENTER Software Installation Utility     A               This chapter describes how to install and configure E               DECwindows Motif software using the POLYCENTER Software G               Installation (PCSI) utility. The DECwindows Motif product C               supports PCSI installations using the Digital Command '               Language (DCL) interface.   F                 ________________________ Note ________________________  E                 Kits included on the OpenVMS Version 8.3 distribution 7                 media are signed using Secure Delivery.   F                 ______________________________________________________  C               This chapter presents information about the following                topics:   8               o  Section 2.1, Accessing Help Information  I               o  Section 2.2, Extracting and Printing the Product Release                   Notes  F               o  Section 2.3, Installing the DECwindows Motif Software  4               o  Section 2.4, Recovering from Errors  A               Refer to the HP OpenVMS System Manager's Manual for E               complete details about installing and managing software E               products on your system. In addition to getting started F               information, this manual provides information about such               topics as:  ,               o  Removing installed products  1               o  Reconfiguring installed products   7               o  Copying software kits to new locations   /               o  Retrieving product information   I                                                                       2-1            6     Using the POLYCENTER Software Installation Utility      A           Refer to Section 1.2 for information about prerequisite             software and licenses.  D              _______________________ Caution _______________________  B              If you do not have a satisfactory backup copy of your>              system disk, do not attempt to install DECwindowsB              Motif software. Back up the system disk (as described?              in the OpenVMS upgrade and installation supplement A              for your system) before you install DECwindows Motif               software.  9              Before beginning the installation procedure, @              review Chapter 1 for information about installation+              preparations and requirements.   C              ______________________________________________________                                                              2-2            I                        Using the POLYCENTER Software Installation Utility I                                            2.1 Accessing Help Information     &         2.1 Accessing Help Information  H               Online help is available with the installation utility forI               all PRODUCT commands and qualifiers. For help on a specific I               command, enter the DCL command HELP followed by the command                and product name.   D               Refer to the following documents for information about8               tasks and PRODUCT commands and qualifiers:  3                  HP OpenVMS System Manager's Manual H                  HP OpenVMS System Management Utilities Reference Manual*                  HP OpenVMS DCL Dictionary  A               Refer to the HP OpenVMS System Manager's Manual for I               complete information about responding to questions that the I               PCSI utility asks during product installation. For example, F               when you respond to questions, you can do the following:  A               o  Enter a value and press the Return key to select                   options.   ?               o  Press the Return key to accept default values.   (               o  Confirm your responses.  D                  After you respond to questions by selecting optionsF                  or accepting default values, the installation utility4                  displays a summary of your answers.  D                  Then a question is displayed asking whether you areD                  satisfied with your answers and whether you want toH                  continue with the installation. If you decide to changeF                  your responses, type No and press the Return key. YouH                  can then either reenter your responses or answer No and4                  exit from the installation utility.  E               o  Stop the installation by pressing Ctrl/Y. (Note that 1                  this option is not recommended.)   =         2.2 Extracting and Printing the Product Release Notes   E               Before you begin the installation procedure, you should F               read the product release notes. To extract a copy of theH               release notes, define PCSI$SOURCE to point to the locationF               (device name and directory) of the PCSI kit. Then, enterG               the PRODUCT EXTRACT RELEASE_NOTES command followed by the 7               product name (DWMOTIF) at the DCL prompt.   I                                                                       2-3            6     Using the POLYCENTER Software Installation Utility9     2.2 Extracting and Printing the Product Release Notes                For example:  ,           $ DEFINE PCSI$SOURCE DKA400:[KITS]1           $ PRODUCT EXTRACT RELEASE_NOTES DWMOTIF   :           In the above example, the directory in which the7           installation kit is located is referred to as B           dka400:[kits]. You should substitute this directory nameB           with the actual location of the DECwindows Motif kit. ToD           obtain the directory location of the DECwindows Motif kit,A           refer to the documentation that accompanies the product            distribution media.   E           Once you extract the release notes to a file, you can print D           the file. Note that you do not need to install the product/           before you extract the release notes.   0     2.3 Installing the DECwindows Motif Software  <           The following sections describe how to install the;           DECwindows Motif software using the PCSI utility.   B           Refer to Chapter 1 for information about account quotas,,           disk space, and system parameters.  #     2.3.1 Starting the Installation   C           To start the PCSI utility, enter the following command at            the DCL prompt:   ,           $ DEFINE PCSI$SOURCE device:[KITS]  =           where device is the name of the device on which the ?           distribution media is mounted or the installation kit B           is located. In the above example, the directory in whichC           the installation kit is located is referred to as [KITS]. C           You should substitute this directory name with the actual C           directory location of the DECwindows Motif kit. To obtain B           the location of the kit, refer to the documentation that5           accompanies the product distribution media.              Next, invoke PCSI:  #           $ PRODUCT INSTALL DWMOTIF   C              ________________________ Note ________________________   ;              If you want to see the help text shown in this >              chapter, use the /HELP qualifier with the PRODUCT       2-4            I                        Using the POLYCENTER Software Installation Utility I                              2.3 Installing the DECwindows Motif Software                       INSTALL command.  @                 With the exception of a few message continuationC                 lines, all of the dialog text shown in this chapter @                 has been left-justified to allow longer lines toC                 appear as displayed. Therefore, indentation present @                 in the actual dialog is not shown in the example                 presented here.   F                 ______________________________________________________  %         2.3.2 The Installation Dialog   F               The installation dialog begins by displaying the name ofI               the product which PCSI is installing. You are then asked to I               verify that you want to continue with the installation. The I               dialog continues with a display of product name, copyright, (               and licensing information.  -         Performing product kit validation ... (         %PCSI-I-VALPASSED, validation ofU         DKB200:[SYS0.][SYSMGR]DEC-AXPVMS-DWMOTIF-V0106--1.PCSI$COMPRESSED;1 succeeded   0         The following product has been selected:N             DEC AXPVMS DWMOTIF V1.6                Layered Product [Installed]  &         Do you want to continue? [YES]  (         Configuration phase starting ...  V         You will be asked to choose options, if any, for each selected product and forW         any products that may be installed to satisfy software dependency requirements.   1         DEC AXPVMS DWMOTIF V1.6: DECwindows Motif   D         (c) Copyright 2006 Hewlett-Packard Development Company, L.P.          Hewlett-Packard Company.  ,         This product uses the PAK:  DW-MOTIF  :         Do you want the defaults for all options? [YES] No  +             DEC AXPVMS VMS V8.3 [Installed]   F             * Configuration options for this referenced product cannotF             * be changed now because the product is already installed.H             * (You can use PRODUCT RECONFIGURE later to change options.)  7             Install Low Bandwidth X (LBX) Support [YES]   J             Install the DECwindows Motif Version 1.6 client software [YES]  I                                                                       2-5            6     Using the POLYCENTER Software Installation Utility0     2.3 Installing the DECwindows Motif Software    =         Do you want the defaults for all suboptions? [YES] NO   "          Install New Desktop [YES]D           Install Manual (reference) pages for the New Desktop [YES]8           Make the New Desktop the default desktop [YES]5          Install traditional DECwindows Desktop [YES] 5          Programming Support for the C Language [YES] :          Programming Support for the Pascal Language [YES];          Programming Support for the FORTRAN Language [YES] 6          Programming Support for the New Desktop [YES]#          Programming examples [YES]   >          Do you want the defaults for all suboptions? [YES] NO#           Sound example files [YES] 3           Programming examples for DECwindows [YES] 8           Programming examples for the New Desktop [YES]'          Translated Image Support [YES]   M          If a Language Variant is installed, refer to the Installation Guide.   '          Do you want to continue? [YES]   /     Do you want to review the options? [NO] YES   -     DEC AXPVMS DWMOTIF V1.6: DECwindows Motif '         DEC AXPVMS VMS V8.3 [Installed] 2         Install Low Bandwidth X (LBX) Support: YESE         Install the DECwindows Motif Version 1.6 client software: YES !          Install New Desktop: YES C           Install Manual (reference) pages for the New Desktop: YES 7           Make the New Desktop the default desktop: YES 4          Install traditional DECwindows Desktop: YES4          Programming Support for the C Language: YES9          Programming Support for the Pascal Language: YES :          Programming Support for the FORTRAN Language: YES5          Programming Support for the New Desktop: YES "          Programming examples: YES"           Sound example files: YES2           Programming examples for DECwindows: YES7           Programming examples for the New Desktop: YES &          Translated Image Support: YES  /     Are you satisfied with these options? [YES]         Execution phase starting ...  ;     The following product will be installed to destination: A         DEC AXPVMS DWMOTIF V1.6      DISK$ALPHAYSYS:[VMS$COMMON.]        2-6            I                        Using the POLYCENTER Software Installation Utility I                              2.3 Installing the DECwindows Motif Software     N         Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%  R         **** DECwindows Motif application and run-time support files DETECTED ****:         **** DECwindows device support files DETECTED ****         ...100%   1         The following product has been installed: B             DEC AXPVMS DWMOTIF V1.6                Layered Product  1         DEC AXPVMS DWMOTIF V1.6: DECwindows Motif   &             System reboot is required.  R             If using a language variant, reboot after upgrade of language variant.  H             Installation Verification Procedure can be run after reboot.  ?         2.3.2.1 Saving the Programming Environment (Alpha Only)   F               The DECwindows Motif Alpha installation procedure checksI               whether the OSF/Motif Release 1.1.3 programming environment G               exists on your system. If it is present, the installation C               procedure displays the following information and asks B               whether you want to save the OSF/Motif Release 1.1.3&               programming environment:  I         The DECwindows Motif programming environment was installed with a O         previous version of this kit. This environment is incompatible with the U         OSF/Motif Release 1.2 environment provided with DECwindows Motif Version 1.6. ;         XUI programming environment is also not included in %         DECwindows Motif Version 1.6.   J         If you intend to continue developing programs for XUI or OSF/MotifG         Release 1.1.3, then save this environment.  Please refer to the N         installation guide for more details and information on accessing these$         files in their new location.  H         If you do not choose to save the XUI and OSF/Motif Release 1.1.3L         programming environment, those files will be removed from the system
         disk.   I         Save the OSF/Motif Release 1.1.3 and XUI programming environment?   D               If you answer Yes and press the Return key to save theF               OSF/Motif Release 1.1.3 and XUI programming environment,E               a subdirectory called [.DECW$113] is created. The files H               that support that programming environment are moved to the'               [.DECW$113] subdirectory.   I                                                                       2-7            6     Using the POLYCENTER Software Installation Utility0     2.3 Installing the DECwindows Motif Software    B           If you answer No and press the Return key, the files are           deleted.  D           Refer to HP DECwindows Motif for OpenVMS Release Notes forD           information about accessing files related to the OSF/Motif0           Release 1.1.3 programming environment.  C           Note that this portion of the installation does not occur B           if you are installing or upgrading the OpenVMS operatingB           system and the DECwindows Motif software simultaneously.                                                                           2-8            I                        Using the POLYCENTER Software Installation Utility I                              2.3 Installing the DECwindows Motif Software     $         2.3.2.2 Default Installation  I               Next, the dialog asks if you want the default installation. A               If this is a new DECwindows Motif installation, the H               procedure installs all options that apply to your hardware               platform.   F               If this is an upgrade, and a prior version of DECwindowsB               Motif is present, the procedure installs all optionsI               selected previously. Any options that were not available in H               the prior version are installed according to their current               default settings.   7         Do you want the defaults for all options? [YES]   I               The remainder of this chapter assumes that you answer No to                this question.  &         2.3.2.3 LBX Proxy Installation  C               Next, the dialog asks if you want to install the Low- -               Bandwidth X (LBX) proxy option.   H         The LBX proxy reduces the overall network bandwidth required forM         client-to-server communications.  The LBX proxy can be installed as a L         standalone option or in conjunction with the DECwindows Motif client         software.   3         Install Low Bandwidth X (LBX) Support [YES]   F               See the HP DECwindows Motif for OpenVMS Management Guide9               for more information about the LBX feature.   9         2.3.2.4 Selecting Installation of Client Software   B               Next, the installation procedure asks if you want to*               install the client software:  G         Install the DECwindows Motif Version 1.6 client software? [YES]   F               Answer Yes if you intend to run any programs requiring aH               DECwindows display, either on this system or on any remote               system.   8               If you answer No, skip to Section 2.3.2.8.  H               If you answer Yes, the dialog asks if you want the default"               client installation:  :         Do you want the defaults for all suboptions? [YES]  I                                                                       2-9            6     Using the POLYCENTER Software Installation Utility0     2.3 Installing the DECwindows Motif Software    =           Answer Yes if you want to take all the defaults for :           the client installation. If you answer Yes, skip:           to Section 2.3.2.8. If you answer No, proceed to           Section 2.3.2.5.  ,     2.3.2.5 Asking About Selecting a Desktop  ?           The installation procedure displays information about @           the New Desktop and Traditional Desktop. You can electB           to install one or both desktops. If you elect to installB           the New Desktop, the dialog asks whether the New Desktop            should be the default.  J     The New Desktop is a graphical user interface that is derived from theK     Common Desktop Environment (CDE).  It offers the following features not 6     available with the traditional DECwindows desktop:  M          o Multiple workspaces for greater flexibility in managing windows on             the screen.  K          o An icon-based File Manager to make it easier to manipulate files -            from the graphical user interface.   I          o Enhanced support for the drag-and-drop feature, which is fully D            supported in the new File Manager and Application Manager            applications.  9          o New Image Viewer and Icon Editor applications.   D     Both the New Desktop and the DECwindows desktop provide the sameF     underlying X and Motif libraries and the same DECterm, Bookreader,$     Mail, and Calendar applications.       Install New Desktop [YES]   =     The manual pages provide online help text for New Desktop <     functions. If installed they can be viewed using the man-     page viewer from the Application Manager.   >     Install Manual (reference) pages for the New Desktop [YES]  I     If the New Desktop is the default, the new login box will be used and A     the user has the option at login to use either the New or the      traditional desktop.  L     If the New Desktop is not the default, the traditional login box will be<     used and only the traditional desktop will be available.       2-10           I                        Using the POLYCENTER Software Installation Utility I                              2.3 Installing the DECwindows Motif Software     >         You can change the default desktop by editing the fileF         [SYSMGR]DECW$PRIVATE_APPS_SETUP.COM and restarting DECwindows.  6         Make the New Desktop the default desktop [YES]  P         The traditional DECwindows Desktop is that provided since Version 1.2 ofL         DECwindows.  If both new and traditional desktops are installed, the5         user can select which to run when logging in.   4         Install traditional DECwindows Desktop [YES]  F               See Section 3.4 for instructions about how to change theC               choice of desktop after the installation is complete.   4         2.3.2.6 Programming Language Support Options  C               Next, the dialog asks you which programming languages E               you want to install and whether you want to install the #               programming examples.   C               The installation procedure uses the following dialog:   L         Headers and related files to support programs in C that will use the         DECwindows libraries.   4         Programming Support for the C Language [YES]  E         Include files to support programs in Pascal that will use the          DECwindows libraries.   9         Programming Support for the Pascal Language [YES]   F         Include files to support programs in FORTRAN that will use the         DECwindows libraries.   :         Programming Support for the FORTRAN Language [YES]  L         Headers and related files to support programs in C that will use the         New Desktop widgets.  5         Programming Support for the New Desktop [YES]   =         Examples of programming to use the various libraries.   "         Programming examples [YES]  ?         Do you want all the defaults for the subitems? [YES] no   :         Sample sound files that can be used with DECsound.  I                                                                      2-11            6     Using the POLYCENTER Software Installation Utility0     2.3 Installing the DECwindows Motif Software         Sound example files [YES]   K     Examples, in various programming languages, of using the DECwindows and #     standard widgets and libraries.   -     Programming examples for DECwindows [YES]   K     Examples, in C, of using the new widgets provided with the New Desktop.   2     Programming examples for the New Desktop [YES]  1     2.3.2.7 Translated Image Support (Alpha Only)   E           If you are installing DECwindows Motif on the OpenVMS Alpha A           operating system, the dialog now prompts you to install C           Translated Image Support (TIS). This option enables Motif D           Release 1.1.3 programs translated from the VAX environment+           to work in the Alpha environment.   F     Translated image support to allow programs translated from the VAX@     to work on the Alpha with the Motif Release 1.1.3 libraries.  "     Translated Image Support [YES]  $     2.3.2.8 Language Variants Notice  @           The dialog now displays text about the use of languageC           variants. You should not install DECwindows Motif Version B           1.6 unless you also plan to install the DECwindows MotifB           Version 1.6 language variants for all the languages that           you want to use.  >           Refer to the Installation Guide that accompanies the?           variant kit for further information about options and >           restrictions specific to the languages you choose to           install and use.  H     If a Language Variant is installed, refer to the Installation Guide.  J     If you have a language variant of DECwindows Motif installed, then youF     must upgrade to the version for DECwindows Motif Version 1.6 afterK     completing this installation and before rebooting the system. A failure 4     to do so could prevent DECwindows from starting.  J     If there is no local language variant upgrade available for DECwindowsH     Motif Version 1.6, then you should remove the local language variant3     before installing DECwindows Motif Version 1.6.   "     Do you want to continue? [YES]       2-12           I                        Using the POLYCENTER Software Installation Utility I                              2.3 Installing the DECwindows Motif Software     2         2.3.2.9 Reviewing the Installation Options  F               The dialog then gives you a chance to review the options                you have selected.  1         Do you want to review the options? [NO] y   1         DEC AXPVMS DWMOTIF V1.6: DECwindows Motif '         DEC AXPVMS VMS V8.3 [Installed]   2         Install Low Bandwidth X (LBX) Support: YESE         Install the DECwindows Motif Version 1.6 client software: YES           Install New Desktop: YESA         Install Manual (reference) pages for the New Desktop: YES 5         Make the New Desktop the default desktop: YES 3         Install traditional DECwindows Desktop: YES 3         Programming Support for the C Language: YES 8         Programming Support for the Pascal Language: YES9         Programming Support for the FORTRAN Language: YES 4         Programming Support for the New Desktop: YES!         Programming examples: YES           Sound example files: YES                                              I                                                                      2-13            6     Using the POLYCENTER Software Installation Utility0     2.3 Installing the DECwindows Motif Software    ,     Programming examples for DECwindows: YES1     Programming examples for the New Desktop: YES !     Translated Image Support: YES   /     Are you satisfied with these options? [YES]        2.3.2.10 Execution Dialog   >           During the execution phase, the installation utility@           begins by displaying the names of all products it willE           install or remove. This is followed by an indication of the            procedure's progress.   C              ________________________ Note ________________________   >              During this phase, a check is made for DECwindowsC              Motif support files. If these files are not available, <              the dialog may ask if you want to continue. See3              Section 2.3.2.11 for more information.   C              ______________________________________________________         Execution phase starting ...  ;     The following product will be installed to destination: H         DEC AXPVMS DWMOTIF V1.6              DISK$ALPHASYS:[VMS$COMMON.]       Portion done: 0%
     ...10%
     ...20%
     ...30%
     ...40%
     ...50%
     ...60%
     ...70%
     ...80%
     ...90%  5     2.3.2.11 Verifying DECwindows Motif Support Files   C           The installation procedure verifies that DECwindows Motif B           applications and run-time support files are installed on?           the operating system (for example, transport and font @           files, which are required for running DECwindows Motif           software).  N     **** DECwindows Motif application and run-time support files DETECTED ****  /           These files are installed by default.        2-14           I                        Using the POLYCENTER Software Installation Utility I                              2.3 Installing the DECwindows Motif Software     F               Next, the installation procedure checks for the presenceE               of support files that are needed to use the system as a I               workstation or as a workstation boot server. If the support F               files are installed, the following message is displayed:  :         **** DECwindows device support files DETECTED ****  C               If the files are not installed, users are warned with B               the following message that their systems cannot be a7               workstation or a workstation boot server:   S         The DECwindows device support files for using this machine as a workstation C         or as a boot node for workstations have not been installed.   N         You can use the POLYCENTER Software Installation utility to change theA         options selected when the OpenVMS software was installed. N         See the POLYCENTER Software Installation Utility User's Guide for moreR         information. To add the support files and the 75DPI and/or the 100DPI font>         files, use the PRODUCT RECONFIGURE command as follows:  !         $ PRODUCT RECONFIGURE VMS   P         You should add the "DECwindows server support" subclass in the Utilities         class.  @               The installation procedure then asks the following               question:   W         Do you wish to continue with this installation without the workstation support?   F               If you answer No (default) and press the Return key, theF               installation is stopped. See Section 4.2 for informationE               on adding the necessary support files. Once you install C               the necessary support files, restart the installation                procedure.  =               If you answer Yes and press the Return key, the %               installation continues.   G               Note that this portion of the installation does not occur H               if you install or upgrade the OpenVMS operating system and7               DECwindows Motif software simultaneously.       I                                                                      2-15            6     Using the POLYCENTER Software Installation Utility0     2.3 Installing the DECwindows Motif Software    /     2.3.2.12 Reviewing Final Installation Notes   B           If the installation is successful, the dialog displays aB           list of all products installed and removed. Finally, theB           procedure displays additional installation notes for the#           DECwindows Motif product.        ...100%   -     The following product has been installed: <         DEC AXPVMS DWMOTIF V1.6              Layered Product  -     DEC AXPVMS DWMOTIF V1.6: DECwindows Motif        System reboot is required.  J     If using a language variant, reboot after upgrade of language variant.  C     A system reboot is required to install the new DECwindows Motif K     images. If this is a new installation, you should execute AUTOGEN using      the following command:  7     $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT CHECK_FEEDBACK   G     This command adjusts your system parameters and reboots the system.   G     If you want to use DECwindows with any language other than English, A     install the appropriate DECwindows Motif Version 1.6 language A     variant product before using AUTOGEN or rebooting the system.   @     Installation Verification Procedure can be run after reboot.  L     Run the Installation Verification Procedure (IVP) after the installationF     is completed and the system is rebooted. The IVP is located in the/     following directory: SYS$TEST:DECW$IVP.COM.        2.4 Recovering from Errors  B           An error during installation can occur if one or more of*           the following conditions exists:  7           o  The operating system version is incorrect.   <           o  The prerequisite software version is incorrect.  D           o  Process quotas required by the installation utility are              inadequate.  :           o  The OpenVMS Help library is currently in use.       2-16           I                        Using the POLYCENTER Software Installation Utility I                                                2.4 Recovering from Errors     A               For descriptions of the error messages generated by G               these conditions, see the documents listed in the Related H               Documents section in the Preface. These documents may helpG               you diagnose errors and decide what corrective actions to                take.                                                                                 I                                                                      2-17            6     Using the POLYCENTER Software Installation Utility     2.4 Recovering from Errors    A           If the installation procedure fails for any reason, the C           PCSI utility displays a message similar to the following:   I     %PCSI-I-INSFAIL, The installation of DECwindows Motif Version 1.6 for           OpenVMS has failed.  D           If the installation fails, fix the problem and restart the!           installation procedure.   /     2.5 Adjusting Parameters After Installation   B           If you are installing or upgrading the OpenVMS operatingB           system and the DECwindows Motif software simultaneously,D           the installation procedure checks the system parameters at9           this point (see Section 1.6.3 and Section 3.5).   D           When DECwindows Motif attempts to start after a successful>           installation, it may display messages similar to the           following:  T     %DECW-W-BADVALUE, SYSGEN parameter GBLPAGES is 120000, should be at least 150000E     %DECW-W-BADVALUE, Free GBLPAGES is 75040 should be at least 92000 O     %DECW-W-BADVALUE, SYSGEN parameter CLISYMTBL is 256, should be at least 512 M     Some SYSGEN parameters must be reset for DECwindows to start. If you type Q     YES, AUTOGEN will change these parameters and reboot your system. If you type P     NO, AUTOGEN will not be run or cause a reboot but DECwindows will not start.7     Do you want the system to run AUTOGEN for you [YES]   C              ________________________ Note ________________________   =              You will not see these messages if this is a new (              installation of DECwindows.  C              ______________________________________________________   B           At this point, press the Return key. The system will runC           AUTOGEN, adjust your system parameters, reboot the system +           and display the DECwindows login.                    2-18                         I                                                                         3 I         _________________________________________________________________   I                                             After Installing the Software     G               This chapter discusses the tasks that you need to perform B               after the DECwindows Motif installation is complete:  D               o  Section 3.1, Starting the DECwindows Motif Software  -               o  Section 3.2, Running the IVP   0               o  Section 3.3, Choosing a Console  3               o  Section 3.4, Selecting the Desktop   2         3.1 Starting the DECwindows Motif Software  A               If the workstation support component of OpenVMS has C               been installed, the DECwindows startup procedure runs C               automatically when the system reboots. Either the New F               Desktop login dialog box or the DECwindows desktop StartH               Session dialog box is displayed, depending on the value ofH               the DECW$START_NEW_DESKTOP global symbol. (See Section 3.4$               for more information.)  B               If the DECwindows Motif license that is installed onD               your system is not valid, warning messages may displayB               on your console terminal and DECwindows Motif is notB               started automatically. If this situation occurs, logC               into the system, install the valid license, and start B               the DECwindows Motif software manually. For completeD               information on installing licenses on OpenVMS systems,G               see the HP OpenVMS License Management Utility Manual. For G               information on starting DECwindows, see the HP DECwindows 1               Motif for OpenVMS Management Guide.           I                                                                       3-1            !     After Installing the Software      3.2 Running the IVP          3.2 Running the IVP   <           Run the Installation Verification Procedure (IVP),@           SYS$TEST:DECW$IVP.COM, after you install and start theD           DECwindows Motif product. This procedure contains a series@           of tests that verify that the software installation is            complete and accurate.        3.2.1 Starting the Procedure  B           To start the IVP procedure, invoke the SYS$TEST:DECW$IVP;           command procedure. The dialog begins with a brief            introduction.        $ @SYS$TEST:DECW$IVP  @     (c) Copyright 2006 Hewlett-Packard Development Company, L.P.  M     HP DECwindows Motif for OpenVMS Installation Verification Procedure (IVP)   N     This IVP is intended to test some of the functionality of DECwindows Motif@     and to provide a quick method of verifying the installation.                                                   3-2            I                                             After Installing the Software I                                                       3.2 Running the IVP     F                 ________________________ Note ________________________  D                 If you are invoking the IVP from an X terminal using@                 LAT software, enter the following command first:  H                 $ SET DISPLAY/CREATE/NODE=LAT_nnnnnnnnnnnn/TRANSPORT=LAT  >                 Substitute your actual LAT terminal number for                 nnnnnnnnnn.   :                 Enter the default at the _Display: prompt.  F                 ______________________________________________________  $         3.2.2 Display-Oriented Tests  G               Next, the IVP procedure attempts to run a set of display- F               oriented tests. Whether these tests are run and how theyI               are run depends on your hardware and on the availability of                the test images.  H               o  If the test images exist and you are invoking the testsE                  from a workstation, you are asked where the display- H                  oriented tests should display. Your current workstationG                  is usually the default display. The default display is I                  usually taken from the value of the DECW$DISPLAY logical I                  associated with the process running the IVP. The logical F                  can point to either a local or remote display server.  A               o  If the test images exist and you are not using a F                  workstation, the procedure indicates that you need toI                  enter a node name at the _Display: prompt. In this case, I                  the DECW$DISPLAY logical is not defined, therefore there G                  is no default display. For example, if you use the SET F                  HOST command to access a system and do not define theG                  DECW$DISPLAY logical, the IVP does not know if you are F                  on a workstation. In this case, you enter the name ofH                  the node where you wish the display to occur. If only aH                  node name is supplied, the default is to use the DECnetI                  transport, server 0, and screen 0 on the specified node. D                  If you wish to override these defaults, specify theE                  full display name (for example, ashfld:2.1 creates a F                  connection to screen 1, server 2 on node ashfld using'                  the TCP/IP transport).   H               o  If the IVP does not find the images, a message displays>                  to inform you that the tests will not be run.  I                                                                       3-3            !     After Installing the Software      3.2 Running the IVP     B           Press Ctrl/Z at the prompt if you do not want to run the!           display-oriented tests.   B           The following example shows the display test dialog on aA           workstation system. The display device _WSA150 could be 5           either a local display or a remote display.   M     To skip the display-oriented tests, press Ctrl/Z at the following prompt.        _Display:[_WSA150:]:  0     %DECW-I-IVP, The IVP will display on WSA150:B     %DECW-I-IVP, Running DECW$EXAMPLES:ICO.EXE for up to a minute.0     %DECW-I-IVP, Press Ctrl/Y to interrupt test.0     %DCL-S-SPAWNED, process DECW$IVP_ICO spawnedB     %DECW-I-IVP, Running SYS$SYSTEM:DECW$CLOCK for up to a minute.0     %DECW-I-IVP, Press Ctrl/Y to interrupt test.2     %DCL-S-SPAWNED, process DECW$IVP_CLOCK spawned                                                           3-4            I                                             After Installing the Software I                                                       3.2 Running the IVP     I               The following partial example shows the test being run on a %               non-workstation system.   M         This machine is not a workstation.  Please provide the node name of a R         workstation on which to display the IVP tests.  You must be sure that thisR         account and node have security access to the display node, or the IVP will
         fail.   Q         To skip the display-oriented tests, press Ctrl/Z at the following prompt.            _Display []: NODE33 8         %DECW-I-IVP, The IVP will display on NODE33::0.0  I               The remainder of the dialog is identical to the workstation                example.           3.2.3 LBX Proxy Tests   A               If the display-oriented tests were selected and the F               required images are available, the procedure attempts toG               run the LBX proxy tests. The dialog's display of the test H               results depends on whether a display name or node name wasG               entered in the previous dialog section, if a display name F               was entered whether the display is local or remote, and,G               if a local display, whether the display has been properly D               configured to support the LBX test. The following listE               describes the IVP's actions in each of several possible                cases.  F               o  If the specified display is local, the display serverI                  has enabled support for the LBX and SECURITY extensions, I                  and the IVP process has the required privileges, the IVP 1                  displays the following messages.   H         %DECW-I-IVP, LBX Proxy tests, tests will execute through a proxyF         %DECW-I-IVP, Running DECW$EXAMPLES:ICO.EXE for up to a minute.4         %DECW-I-IVP, Press Ctrl/Y to interrupt test.4         %DCL-S-SPAWNED, process DECW$IVP_LBX spawned         Using port number '50'4         %DCL-S-SPAWNED, process DECW$IVP_ICO spawned+         %DECW-I-IVP, End of LBX Proxy tests   E               o  If the specified display is remote, the procedure is E                  unable to determine if the associated display server E                  supports the LBX and SECURITY extensions. The dialog F                  issues a message warning you that the tests will failE                  if the remote server is not properly configured. The C                  following example shows the LBX portion of the IVP   I                                                                       3-5            !     After Installing the Software      3.2 Running the IVP     E              after a remote display has been selected and the process @              running the IVP has the required privileges. If theC              remote server is properly configured, the remainder of D              the LBX portion of the dialog is identical to the firstD              case in this list. If the remote server is not properlyD              configured, the LBX Proxy test (and the IVP) will fail.  E     The LBX tests can only be executed if the display server has been J     configured to support the LBX and SECURITY extensions and this accountI     has permission to generate cookies. Normally, remote servers will not >     give that permission and the LBX tests cannot be executed.  >     Answer "NO" at the following prompt to skip the LBX tests.       Execute LBX test? YES   ?           o  If the specified display is local, and the display @              server has enabled support for the LBX and SECURITYA              extensions, but the process running the IVP does not ?              have the required privileges, the IVP displays the               following message.   N     %DECW-I-IVP, No privilege to execute LBX part of test. Proxy test skipped.  E           o  If the specified display is local and the display server B              has not been configured to support the LBX extension,4              the IVP displays the following message.  K     %DECW-I-IVP, Server does not support LBX extension. Proxy test skipped.   ?           o  If the specified display is local, and the display C              server has not been configured to support the SECURITY ?              extension, the IVP displays the following message.   P     %DECW-I-IVP, Server does not support SECURITY extension. Proxy test skipped.  ?           o  If a node name is entered in the first part of IVP C              dialog instead of a display name, the IVP displays the               following message.   K     %DECW-I-IVP, LBX Proxy tests need a display device. Proxy test skipped.              3-6            I                                             After Installing the Software I                                                       3.2 Running the IVP     '         3.2.4 Nondisplay-Oriented Tests   G               Finally, the IVP runs a set of nondisplay-oriented tests.   I               o  The first of these tests invokes the Motif UIL compiler. D                  If you did not install programming support, the IVPG                  informs you that this test will not be run because the I                  Motif UIL image does not exist. If this test is run, you 7                  are notified of its completion status.   F               o  The last test converts a text file to DDIF format andF                  then converts it back to text, comparing the originalC                  text file with the result. If the files match, the G                  test is successful. You are notified of its completion                   status.  F               The following example shows the IVP output for the final               two tests.  7         %DECW-I-IVP, Invoking the UIL Motif compiler... H         %DECW-S-IVP, The UIL Motif compiler test completed successfully.6         %DECW-I-IVP, Beginning CONVERT/DOCUMENT IVP...1         %DECW-S-IVP, CONVERT/DOCUMENT IVP passed. +         %DECW-S-IVP, The IVP has completed. 	         $            3.3 Choosing a Console  H               You can boot the DECwindows Motif software manually from aG               console. However, the type of console varies according to F               operating system platform, as described in the following               sections.   &         3.3.1 On OpenVMS Alpha Systems  F               You can boot the DECwindows Motif software from the mainE               console. You can then toggle between displaying and not E               displaying the operator window by pressing Ctrl/F2. The :               main console is always a workstation screen.  C               If you are logged in to the main console (workstation E               screen), you must log out before DECwindows will start. @               Issue the following command from the main console:  )               $ @SYS$MANAGER:DECW$STARTUP   I                                                                       3-7            !     After Installing the Software      3.3 Choosing a Console    C           Once the command procedure completes, log out of the main B           console. Otherwise the server will not start and a login           box will not appear.  D           For an alternate console, you can use a terminal connected@           to the workstation by means of a terminal port. If you>           boot from the main console, the alternate console is@           connected when you invoke the DECwindows Motif startupB           command procedure. Note that if you boot the system fromC           an alternate console, you cannot start the Console Window            application.        3.3.2 On OpenVMS I64 Systems  B           In the OpenVMS I64 environment, the only type of console=           that is supported is a non-graphics, serial console A           connected through a special management port. See the HP D           OpenVMS Upgrade and Installation Manual for information on3           configuring and using the serial console.        3.4 Selecting the Desktop   A           DECwindows Motif provides a choice of two desktops: the ?           New Desktop, which is derived from the Common Desktop =           Environment (CDE), and the Traditional (DECwindows)            Desktop.  D           During the installation, if you choose to install both theE           New Desktop and the DECwindows desktop, you are asked which 5           desktop you want to be the default desktop.   E           To select the other desktop as the default desktop, perform            the following steps.  E           1. If the file SYS$MANAGER:DECW$PRIVATE_APPS_SETUP.COM does E              not exist, copy it from DECW$PRIVATE_APPS_SETUP.TEMPLATE D              (or create it if an earlier version of DECwindows MotifA              has not been installed on your system). For example:   B              $ COPY SYS$MANAGER:DECW$PRIVATE_APPS_SETUP.TEMPLATE ->              _$ SYS$COMMON:[SYSMGR]DECW$PRIVATE_APPS_SETUP.COM  A           2. Edit SYS$MANAGER:DECW$PRIVATE_APPS_SETUP.COM and add C              a symbol definition for DECW$START_NEW_DESKTOP. If you D              want the New Desktop as the default enter the following&              global symbol definition:  /              $ DECW$START_NEW_DESKTOP == "TRUE"        3-8            I                                             After Installing the Software I                                                 3.4 Selecting the Desktop     I                  If you want the DECwindows desktop as the default, enter 8                  the following global symbol definition:  4                  $ DECW$START_NEW_DESKTOP == "FALSE"  @               3. Restart DECwindows using the following command:  4                  $ @SYS$MANAGER:DECW$STARTUP RESTART  )         3.5 System Maintenance Procedures   D               This section explains how to use the System GenerationE               utility (SYSGEN) and the AUTOGEN utility to adjust your C               system for DECwindows Motif. The AUTOGEN utility uses C               system configuration data to automatically set system                parameters.   F                 ________________________ Note ________________________  D                 The DECwindows Motif startup procedure automaticallyF                 checks for required system parameter values and passesD                 the appropriate values to AUTOGEN via NEWPARAMS.DAT.A                 Therefore, in most cases you do not have to check D                 and modify these values manually as described in theE                 following sections. These sections provide procedures D                 to use if you find it necessary to increase a system@                 resource beyond the values normally specified by!                 DECwindows Motif.   F                 ______________________________________________________  ;         3.5.1 Checking a System Parameter Value with SYSGEN   B               To check the value of a system parameter, invoke theE               SYSGEN utility by entering the following command at the                DCL prompt:   %               $ RUN SYS$SYSTEM:SYSGEN !               SYSGEN> USE CURRENT                SYSGEN>   I               At the SYSGEN prompt, enter the SHOW command to display the I               value of a system parameter. The following command displays ;               the value for the CLISYMTBL system parameter:   $               SYSGEN> SHOW CLISYMTBL  I                                                                       3-9            !     After Installing the Software %     3.5 System Maintenance Procedures     D           After checking parameters with the SHOW command, enter theC           EXIT command at the SYSGEN prompt to return to DCL level.   @     3.5.2 Calculating the Number of Free Global Pages and Global           Sections  ;           To install and run DECwindows Motif software, you ;           must have sufficient free global pages and global A           sections for the DECwindows Motif software and the file $           SYS$LIBRARY:DCLTABLES.EXE.  @           DECwindows Motif attempts to guarantee that sufficient?           resources are available by placing both MIN_ and ADD_ <           parameters for global pages and global sections in=           its NEWPARAMS.DAT file. In addition, the DECwindows A           Motif startup command procedure checks these values and D           automatically invokes AUTOGEN if the current resources areC           insufficient. However, under certain system loads you may B           find it necessary to increase these resources by placingA           your own ADD_ entries in MODPARAMS.DAT. Any ADD_ values B           you place in MODPARAMS.DAT are in addition to the values<           DECwindows Motif places in its NEWPARAMS.DAT file.  E           To determine the number of contiguous free global pages and E           the number of free global sections, enter the WRITE command C           with the F$GETSYI lexical function. If possible, use this E           command at a time of peak load for these two resources. The C           following example shows how to obtain this information at =           your terminal, which is the default for SYS$OUTPUT:   A           $ WRITE SYS$OUTPUT F$GETSYI("CONTIG_GBLPAGES") <Return>            15848 ?           $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLSECTS") <Return>            24  +     3.5.3 Setting the Size of the Page File   >           In order for DECwindows Motif to run with acceptableC           performance, the page file must be large enough to handle E           the virtual memory requirements of your system. The optimal D           size of the page file depends on many factors, such as theE           amount of physical memory on the system and the application            workload.          3-10           I                                             After Installing the Software I                                         3.5 System Maintenance Procedures     D               Normally, you should run AUTOGEN with feedback and letF               AUTOGEN calculate the size of the page file based on theI               usage pattern on your system. To run AUTOGEN with feedback, .               enter the following DCL command:  =               $ @SYS$UPDATE:AUTOGEN SAVPARAMS REBOOT FEEDBACK   H               You can also increase the size of the page file by runningE               the SYSGEN utility or by invoking the command procedure '               SYS$UPDATE:SWAPFILES.COM.   E               For more information about setting the size of the page I               file and running AUTOGEN, see the section about the AUTOGEN G               utility in the HP OpenVMS System Manager's Manual and the G               AUTOGEN section in HP OpenVMS System Management Utilities F               Reference Manual. For more information about performanceG               tuning in general, see the OpenVMS Performance Management                manual.   H         3.5.4 Changing System Parameter Values Using the AUTOGEN Utility  G               If you find it necessary to adjust system parameters, use G               the AUTOGEN utility. AUTOGEN automatically adjusts values D               for parameters that are associated with the values youG               reset manually. To change system parameters with AUTOGEN, 5               edit the file SYS$SYSTEM:MODPARAMS.DAT.   I               To change a parameter value listed in this file, delete the H               current value associated with that parameter and enter the               new value.  D               To make incremental adjustments to parameters, such asF               global pages and global sections, add a line to the fileI               and include both the name of the parameter (with the prefix F               ADD_) and its value. The following example increases the+               global pages value by 30,000:   "               ADD_GBLPAGES = 30000  F               After you enter all your changes, exit from the file andD               execute the AUTOGEN utility to recalculate your systemI               parameters. Enter the following command to recalculate your 6               system parameters and reboot the system:  2               $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT  I                                                                      3-11            !     After Installing the Software %     3.5 System Maintenance Procedures     B           When you specify REBOOT, the AUTOGEN utility performs anD           automatic system shutdown and then reboots the system. AnyD           users logged in to the system are immediately disconnected@           during the shutdown. The automatic reboot puts the new'           parameter values into effect.   D           For details about using AUTOGEN, see the section about theC           AUTOGEN utility in the HP OpenVMS System Manager's Manual A           and the AUTOGEN section in HP OpenVMS System Management %           Utilities Reference Manual.                                                                            3-12                         I                                                                         4 I         _________________________________________________________________   I                                        Managing DECwindows Motif Software     E               After you install the DECwindows Motif product, you can C               tune your system to enhance performance, decrease the F               use of some system resources, and specify certain serverG               settings. This chapter contains information about setting E               up your DECwindows Motif environment. See HP DECwindows H               Motif for OpenVMS Management Guide and HP DECwindows MotifG               for OpenVMS New Features for additional system management                information.  A               The following topics are discussed in this chapter:   I               o  Section 4.1, Customizing the DECwindows X Display Server "                  Startup Procedure  B               o  Section 4.2, Adding DECwindows Base-Support Files  @               o  Section 4.3, Determining and Reporting Problems  I         4.1 Customizing the DECwindows X Display Server Startup Procedure   B               The DECwindows X display server manages the graphicsH               devices on your workstation, such as the screen, keyboard,I               and mouse. The initial startup command procedures determine E               most of the configuration parameters for the DECwindows D               X11 Display Server automatically. However, the commandH               procedures cannot determine some items, such as the layoutH               of the keyboard, appropriate network transport, or which XG               server extensions to enable (such as, XINERAMA, SECURITY,                or XKB).  C               You can specify additional display server settings by ;               modifying the server startup file as follows:   B               1. Make a copy of the file SYS$MANAGER:DECW$PRIVATE_7                  SERVER_SETUP.TEMPLATE and rename it to @                  SYS$MANAGER:DECW$PRIVATE_SERVER_SETUP.COM. ThisF                  server startup file shows how to customize individual  I                                                                       4-1            &     Managing DECwindows Motif SoftwareE     4.1 Customizing the DECwindows X Display Server Startup Procedure     A              workstations by adding a section of DCL commands for               each workstation.  E           2. Edit the file to add or change the desired setup options D              in either of two sections (Cluster Common or Standalone@              Workstation) in the server startup file. Details onE              these options are available from the HP DECwindows Motif E              for OpenVMS Management Guide and within the file itself. D              If you add a workstation-specific option, you must also+              update the variable node_list.   C           3. Restart DECwindows Motif on the workstations for which B              you customized the server startup using the following              command:   0              $ @SYS$MANAGER:DECW$STARTUP RESTART  ,     4.2 Adding DECwindows Base-Support Files  B           If you previously chose not to install or if you removed?           the DECwindows base-support software, use the PRODUCT A           RECONFIGURE command to reconfigure the operating system @           and specifying that you want DECwindows Motif support.  *     4.3 Determining and Reporting Problems  B           If you encounter a problem while using DECwindows Motif,>           report it to HP. Review the related Software ProductB           Description (SPD) for an explanation of warranty. If youA           encounter a problem during the warranty period, you can ,           take one of the following actions:  A           o  Call your HP support representative if your software E              contract or warranty agreement entitles you to telephone               support.   B           o  If you discover a problem with or have comments about=              the documentation, print or edit the online form >              SYS$HELP:OPENVMSDOC_COMMENTS.TXT and send us yourB              comments by Internet, fax, or mail. (See the Reader's<              Comments section in the Preface for addresses.)             4-2                          I                                                                         A I         _________________________________________________________________   I              POLYCENTER Software Installation Utility Sample Installation     I               This appendix contains sample DECwindows Motif installation D               procedures for the OpenVMS I64 Version 8.3 and OpenVMS2               Alpha Version 8.3 operating systems.  G               Refer to Chapter 2 for details about using the POLYCENTER G               Software Installation utility to install DECwindows Motif                software.   B               These sample procedures assume that you have set the@               default directory to the device name and directoryE               containing the DECwindows Motif PCSI kit as well as any                necessary ECOs.   =         A.1 Sample PCSI Installation on an OpenVMS I64 System   C               Example A-1 contains a sample of the DECwindows Motif G               software installation on an OpenVMS I64 operating system.   H         Example A-1 Sample Installation of the DECwindows Motif Software8                     on an OpenVMS I64 Version 8.3 System  I                                                  (continued on next page)                             I                                                                       A-1            @     POLYCENTER Software Installation Utility Sample Installation9     A.1 Sample PCSI Installation on an OpenVMS I64 System     C     Example A-1 (Cont.) Sample Installation of the DECwindows Motif E                         Software on an OpenVMS I64 Version 8.3 System   &     $ PRODUCT INSTALL DWMOTIF <Return>  )     Performing product kit validation ... $     %PCSI-I-VALPASSED, validation ofP     DKB200:[SYS0.][SYSMGR]HP-I64VMS-DWMOTIF-V0106--1.PCSI$COMPRESSED;1 succeeded  ,     The following product has been selected:;         HP I64VMS DWMOTIF V1.6              Layered Product   +     Do you want to continue? [YES] <Return>   $     Configuration phase starting ...  R     You will be asked to choose options, if any, for each selected product and forS     any products that may be installed to satisfy software dependency requirements.   ,     HP I64VMS DWMOTIF V1.6: DECwindows Motif  D         (c) Copyright 2006 Hewlett-Packard Development Company, L.P.       Hewlett-Packard Company.  =     This software product is sold by Hewlett-Packard Company.     N     DECwindows Motif is license-managed using the License Management Facility.    >     Do you want the defaults for all options? [YES] N <Return>  #      HP I64VMS VMS V8.3 [Installed]   ?      * Configuration options for this referenced product cannot >      * be changed now because the product is already installed?      *(You can use PRODUCT RECONFIGURE later to change options)   0      Install Low Bandwidth X (LBX) Support [YES]C      Install the DECwindows Motif Version 1.6 client software [YES]   E                                              (continued on next page)          A-2            I              POLYCENTER Software Installation Utility Sample Installation I                     A.1 Sample PCSI Installation on an OpenVMS I64 System     G         Example A-1 (Cont.) Sample Installation of the DECwindows Motif I                             Software on an OpenVMS I64 Version 8.3 System   G          Do you want the defaults for all suboptions? [YES] NO <Return> &              Install New Desktop [YES]H               Install Manual (reference) pages for the New Desktop [YES]<               Make the New Desktop the default desktop [YES]9              Install traditional DECwindows Desktop [YES] 9              Programming Support for the C Language [YES] >              Programming Support for the Pascal Language [YES]?              Programming Support for the FORTRAN Language [YES] :              Programming Support for the New Desktop [YES]'              Programming examples [YES]   J              Do you want the defaults for all suboptions? [YES] N <Return>'               Sound example files [YES] 7               Programming examples for DECwindows [YES] <               Programming examples for the New Desktop [YES]+              Translated Image Support [YES]   L         If a Language Variant is installed, refer to the Installation Guide.  /         Do you want to continue? [YES] <Return>   :         Do you want to review the options? [NO] Y <Return>  0         HP I64VMS DWMOTIF V1.6: DECwindows Motif*             HP I64VMS VMS V8.3 [Installed]6             Install Low Bandwidth X (LBX) Support: YESI             Install the DECwindows Motif Version 1.6 client software: YES &               Install New Desktop: YESI                 Install Manual (reference) pages for the New Desktop: YES =                 Make the New Desktop the default desktop: YES 9               Install traditional DECwindows Desktop: YES 9               Programming Support for the C Language: YES >               Programming Support for the Pascal Language: YES?               Programming Support for the FORTRAN Language: YES :               Programming Support for the New Desktop: YES'               Programming examples: YES (                 Sound example files: YES8                 Programming examples for DECwindows: YES  I                                                  (continued on next page)     I                                                                       A-3            @     POLYCENTER Software Installation Utility Sample Installation9     A.1 Sample PCSI Installation on an OpenVMS I64 System     C     Example A-1 (Cont.) Sample Installation of the DECwindows Motif E                         Software on an OpenVMS I64 Version 8.3 System   9             Programming examples for the New Desktop: YES   9     Are you satisfied with these options? [YES]  <Return>         Execution phase starting ...  ;     The following product will be installed to destination: H         HP I64VMS DWMOTIF V1.6                DISK$IA64SYS:[VMS$COMMON.]       Portion done: 0%
     ...10%
     ...20%
     ...30%
     ...40%
     ...50%
     ...60%
     ...70%
     ...80%
     ...90%  P       **** DECwindows Motif application and run-time support files DETECTED ****  8       **** DECwindows device support files DETECTED ****       ...100%   -     The following product has been installed: ;         HP I64VMS DWMOTIF V1.6              Layered Product   ,     HP I64VMS DWMOTIF V1.6: DECwindows Motif  "         System reboot is required.  D         Installation Verification Procedure can be run after reboot.     $ Logout <Return>                    A-4            I              POLYCENTER Software Installation Utility Sample Installation I                   A.2 Sample PCSI Installation on an OpenVMS Alpha System     ?         A.2 Sample PCSI Installation on an OpenVMS Alpha System   C               Example A-2 contains a sample of the DECwindows Motif A               software installation on an OpenVMS Alpha operating                system.   I         Example A-2 Sample Upgrade of the DECwindows Motif Software on an 4                     OpenVMS Alpha Version 8.3 System  *         $ PRODUCT INSTALL DWMOTIF <Return>  -         Performing product kit validation ... (         %PCSI-I-VALPASSED, validation ofS         DKB200:[SYS0.][SYSMGR]DEC-AXPVMS-DWMOTIF-V0106--1.PCSI$COMPRESSED succeeded   0         The following product has been selected:@             DEC AXPVMS DWMOTIF V1.6              Layered Product  /         Do you want to continue? [YES] <Return>   (         Configuration phase starting ...  V         You will be asked to choose options, if any, for each selected product and forW         any products that may be installed to satisfy software dependency requirements.   1         DEC AXPVMS DWMOTIF V1.6: DECwindows Motif   H             (c) Copyright 2006 Hewlett-Packard Development Company, L.P.  #             Hewlett-Packard Company   A         This software product is sold by Hewlett-Packard Company.   R         DECwindows Motif is license-managed using the License Management Facility.    B         Do you want the defaults for all options? [YES] N <Return>  +             DEC AXPVMS VMS V8.3 [Installed]       I                                                  (continued on next page)     I                                                                       A-5            @     POLYCENTER Software Installation Utility Sample Installation;     A.2 Sample PCSI Installation on an OpenVMS Alpha System     >     Example A-2 (Cont.) Sample Upgrade of the DECwindows Motif@                         Software on an OpenVMS Alpha Version 8.3                         System  B         * Configuration options for this referenced product cannotA         * be changed now because the product is already installed B         *(You can use PRODUCT RECONFIGURE later to change options)  3         Install Low Bandwidth X (LBX) Support [YES] F         Install the DECwindows Motif Version 1.6 client software [YES]  E         Do you want the defaults for all suboptions? [YES] N <Return> %             Install New Desktop [YES] N                     Install Manual (reference) pages for the New Desktop [YES]B                     Make the New Desktop the default desktop [YES]8             Install traditional DECwindows Desktop [YES]8             Programming Support for the C Language [YES]=             Programming Support for the Pascal Language [YES] >             Programming Support for the FORTRAN Language [YES]9             Programming Support for the New Desktop [YES] &             Programming examples [YES]  I             Do you want the defaults for all suboptions? [YES] N <Return> $            Sound example files [YES]4            Programming examples for DECwindows [YES]9            Programming examples for the New Desktop [YES] *             Translated Image Support [YES]  H     If a Language Variant is installed, refer to the Installation Guide.  +     Do you want to continue? [YES] <Return>   6     Do you want to review the options? [NO] Y <Return>  -     DEC AXPVMS DWMOTIF V1.6: DECwindows Motif '         DEC AXPVMS VMS V8.3 [Installed] 2         Install Low Bandwidth X (LBX) Support: YESE         Install the DECwindows Motif Version 1.6 client software: YES "           Install New Desktop: YESE             Install Manual (reference) pages for the New Desktop: YES 9             Make the New Desktop the default desktop: YES 5           Install traditional DECwindows Desktop: YES   E                                              (continued on next page)        A-6            I              POLYCENTER Software Installation Utility Sample Installation I                   A.2 Sample PCSI Installation on an OpenVMS Alpha System     B         Example A-2 (Cont.) Sample Upgrade of the DECwindows MotifD                             Software on an OpenVMS Alpha Version 8.3"                             System  9               Programming Support for the C Language: YES >               Programming Support for the Pascal Language: YES?               Programming Support for the FORTRAN Language: YES :               Programming Support for the New Desktop: YES'               Programming examples: YES (                 Sound example files: YES8                 Programming examples for DECwindows: YES=                 Programming examples for the New Desktop: YES +               Translated Image Support: YES   =         Are you satisfied with these options? [YES]  <Return>   $         Execution phase starting ...  ?         The following product will be installed to destination: F             DEC AXPVMS DWMOTIF V1.6       DISK$ALPHAYSYS:[VMS$COMMON.]           Portion done: 0%         ...10%         ...20%         ...30%         ...40%         ...50%         ...60%         ...70%         ...80%         ...90%  T           **** DECwindows Motif application and run-time support files DETECTED ****  <           **** DECwindows device support files DETECTED ****           ...100%   1         The following product has been installed: @             DEC AXPVMS DWMOTIF V1.6              Layered Product  1         DEC AXPVMS DWMOTIF V1.6: DECwindows Motif   I                                                  (continued on next page)   I                                                                       A-7            @     POLYCENTER Software Installation Utility Sample Installation;     A.2 Sample PCSI Installation on an OpenVMS Alpha System     >     Example A-2 (Cont.) Sample Upgrade of the DECwindows Motif@                         Software on an OpenVMS Alpha Version 8.3                         System  "         System reboot is required.  D         Installation Verification Procedure can be run after reboot.     $ Logout <Return>                                                                                A-8                          I                                                                         B I         _________________________________________________________________   I                                  Software Components and Version Checking     4         B.1 Obtaining a List of Installed Components  F               Once you have installed DECwindows Motif, you can obtainC               a list of all installed files and the directories and A               subdirectories into which the files were installed.   A               To obtain this list, enter the following POLYCENTER 4               Software Installation utility command:  3               $ PRODUCT SHOW OBJECT/product=dwmotif   ;               Following is sample output from this command.   R         OBJECT                                              OBJECT TYPE     STATUSR         ------                                              -----------     ------N         [000000]                                            directory       OKN         [000000]DEC-AXPVMS-DWMOTIF-V0106.PCSI$DESCRIPTION   file            OKN         [000000]DEC-AXPVMS-DWMOTIF-V0106.PCSI$TLB           file            OKN         [CDA$LIBRARY]                                       directory       OKN         [CDA$LIBRARY]CL_DAY.DOC_STYLE                       file            OKN         [CDA$LIBRARY]DEFSTYLE.DDIF                          file            OKN         [CDE$DEFAULTS]                                      directory       OKN         [CDE$DEFAULTS]                                      directory       OKN         [CDE$DEFAULTS.SYSTEM]                               directory       OKN         [CDE$DEFAULTS.SYSTEM]                               directory       OKN         [CDE$DEFAULTS.SYSTEM.APP-DEFAULTS]                  directory       OKN         [CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]                directory       OKN         [CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DT.DAT          file            OKN         [CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTCALC.DAT      file            OKN         [CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTCREATE.DAT    file            OKN         [CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTFILE.DAT      file            OKN         [CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTHELLO.DAT     file            OK	         . 	         . 	         .   I                                                                       B-1            ,     Software Components and Version Checking0     B.2 Checking the Version of Installed Images    0     B.2 Checking the Version of Installed Images  E           At times you may need to verify the combination of software D           components and versions that are installed on a particularE           system. Use one or more of the following command procedures @           (available from the SYS$UPDATE directory) to check theC           versions of layered product images currently installed on            your system:  '           o  DECW$GET_IMAGE_VERSION.COM   C              Extracts the image identification string from an image 6              and places it into a user-defined symbol.                                                                     B-2            I                                  Software Components and Version Checking I                              B.2 Checking the Version of Installed Images     *               o  DECW$COMPARE_VERSIONS.COM  F                  Compares two image identification strings and assignsE                  a value to a user-defined symbol with these possible                   results:   0                  -  Facility codes do not match.  -                  -  Identifiers are the same.   >                  -  Second identifier is older than the first.  >                  -  Second identifier is newer then the first.  "               o  DECW$VERSIONS.COM  C                  Displays the versions of several components of the C                  DECwindows Motif layered product and the X display A                  server. The DECW$VERSIONS.COM procedure uses the G                  DECW$GET_IMAGE_VERSION.COM command procedure to obtain /                  the image idents of each file.   D               To display the versions of DECwindows images currently5               installed, enter the following command:   ,               $  @SYS$UPDATE:DECW$VERSIONS *  E               The output from the command shows the image ident (DW), I               the version number, and the date the image was created. For ,               example, the following result:                 DW V1.6-060108  H               shows the DECwindows Motif client (DW) image is at version5               1.6 and was created on January 8, 2006.                     I                                                                       B-3                                  F      _________________________________________________________________  F                                                                  Index      1      A                                 Bookreader F      _______________________________     saving customized files,  1-7.      Account quotas                    Booting?        See also Quotas                   DECwindows Motif,  3-1 6        required for installation,      BYTLM parameter;          1-8                             required quota for =      Alternate console                      installation, 1-8   (        See Console                     CF      ASTLM parameter                   _______________________________4        required quota for              Command files?          installation,  1-8              version checking,  B-2 1      AUTHORIZE utility                 Components E        using to change Quotas, 1-9       DECwindows network transport D      AUTOGEN utility                        and base-system support,/        preparing for installation,          1-2 F          3-9                             DECwindows X11 Display Server1        rebooting the system, 3-11           , 1-2 .        using to change system          Console8          parameters,  3-11               alternate,  3-83                                          main,  3-8 5      B______________________________     serial,  3-8 2      Backup                            CustomizingF        backing up a system disk,         saving Bookreader files,  1-7C          1-16                            system after installation, /      Base kit                               4-1   (        required disk space, 1-10       DF      BIOLM parameter                   _______________________________F        required quota for              DECW$COMPARE_VERSIONS.COM,  B-3B          installation,  1-8            DECW$GET_IMAGE_VERSION.COM,-      Blocks                               B-2 >        See Free blocks                 DECW$VERSIONS.COM,  B-3  F                                                                Index-1                   !     DECwindows X11 Display Server F       customizing startup,  4-1        H______________________________/       installing,  1-2                 Hardware E     Desktop                             supported by DECwindows Motif 0       selecting,  2-10, 3-8                , 1-2     DIOLM parameter (       required quota for               IF          installation, 1-8             _______________________________E     Disk space                         Installation requirements, 1-8 *       determining                      IVP5          amount,  1-10                  running,  3-2             number of free blocks, F             1-9                        L______________________________  8       required                         Language variants9          by component,  1-10            installing,  2-12   @                                        License requirements, 1-52     E______________________________    Logging out>     ENQLM parameter                     notifying users,  1-17<       required quota for               Low-Bandwidth X (LBX)9          installation, 1-8              IVP support,  3-5 7     Example programs                    selecting,  2-9           required disk space,  1-10F                                        M______________________________  8     F______________________________    Main console, 3-7?     Files                              Memory requirements, 1-2   #       adding DECwindows files,  4-2 F     FILLM parameter                    N______________________________  2       required quota for               New Desktop=          installation, 1-8              selecting,  2-10, 3-8      Free blocks F       determining amount,  1-9         O______________________________;     Free global pages                  Operator window, 3-7        calculating,  3-10(     Free global sections               PF       calculating,  3-10               _______________________________5                                        Page file size 6     G______________________________     setting,  3-10  1     Global pages                       Parameters   =       See Free global pages             See System parameters +     Global sections                    PCSI @       See Free global sections          accessing DCL help,  2-3C                                         backing up the system disk, .                                            2-2       Index-2                             PCSI (cont'd) I          confirming your responses to     Q______________________________   0             questions,  2-3               QuotasG          displaying messages when the       verifying and changing, 1-9 %             installation fails,  2-18 I          extracting the release notes,    R______________________________ 7             2-3                           Release notes :          installation                       accessing, 2-3              checking programming+                environment,  2-7          S I             displaying language           _______________________________ C                variants,  2-12            Selecting a desktop,  3-8 >             selecting LBX support,        Serial console,  3-88                2-9                        Server startup<             specifying TIS,  2-12           customizing, 4-1B             verifying applications and    Shutting down the systemA                run-time support files,      notifying users, 1-17 2                2-14                       SoftwareE             verifying device support        required operating system ;                files,  2-15                   version,  1-2 I          responding to questions          Starting DECwindows Motif,  3-1 8             during installation,  2-3     SYSGEN utilityE          running the installation           checking system parameter :             command procedure,  2-4           values,  3-9G          selecting the desktop,  2-10       preparing for installation, 1                                               3-9 0         POLYCENTER Software               System4           Installation utility              shutdown  D          See PCSI                              notifying users, 1-175         Postinstallation                  System disk B          determining and reporting          adding DECwindows baseA             problems,  4-2                    support files,  4-2 ;          tasks                              backing up, 2-2 7             customizing DECwindows          determining E                Motif,  4-1                     number of free blocks, 4         Postinstallation tasks, 3-1              1-9C          choosing a console,  3-7           free space required for @          running the IVP,  3-2                installation,  1-9C          starting DECwindows Motif        System Generation utility >             software,  3-1                  See SYSGEN utility;         Programming environment           System parameters 4          disk space requirements,           changingC             1-10                               by using the AUTOGEN ?          OSF/Motif Release 1.1.3,  1-6           utility,  3-11           saving,  2-7   I                                                                   Index-3                    <     System parameters                   recalculating,  3-11         changing (cont'd) F          values,  3-11                 T______________________________  *       checking                         TIS9          values,  3-9                   installing,  2-12 ?       minimum required,  1-13          Translated Image support /       modifying                         See TIS =          incremental adjustments,      Tuning the system, 4-1              3-11                                                                         Index-4                                                                                                                                                                                                                                                                                                                                                                                                                                                                               w(,^z2
Q&簇Cnm6۪X鯄1U6zr5/j2@nf.H1.huF6+=DqJ讇NԨ}>iUK3$Ƿ@*DRjVLb+5E+^(-Z
[ې$˼dzJe!LY#^7NNiuq;XOYwm~EOsϾK&53rA{%Fi/C-dh
^Rw{\ξW)iUv[$q,
|k>%X}Y`051zPvkUwI]r_9#MZW`;玷/ɠ5	$#v%'^!ܻz֋FϞօ=c}%t+Kꜞ?+&.v|JSF{hw|ESZ/NӚ	{Yxh!Z,?/͙ s
6&cVJO25	v52TkUijXMPqfƺRB44͹P!M_pڊPрҬv)ႈ6 ʖy]:Iv<RRJ`M`3GP[B>A
Mk| yڒA0BYDgi<k,@oi}[_f@[NØG666˂O h)Ɯ$fHr?])	TK
+: #ǥA\:'r0cT<ŮqAWȄQ:fy1<ܓfB r|K~Fw%bAC+iyAIuCS:dy6`ah11҄RqZZ^xVHO=p)k޲nL4HtR4ɶ'_B9UiB(rݶ/x\b'grl!c:ܐU4T䒐\6P$-8Leu{a rպЕ|o'y5h1Zd}I8ɐ~Ipr'A\Y_Lug!
ᢾSEo>ɌIGD {Fe	Dwat\FgRa=/	R½׽1V8h>y@]HKЅ˶m۶m6m۶m۶L?D̬\ʝ#:ߔ'aC
Ngkވl{hl-P5^suY?ݖe|i(UIZyƓn .ma46uF~\C2,}Tlx>>Y*{*04DŐz_TlyrRt_qz-8:!uL\y#dn9+	eD@*Mo2<LGzH*g!@k8n9["3`F|P[hFɜfLint!Bhdrbu0~3a1͕ /'/V]z@0j3)g*s}sG5Hxs~yuT32Sݸ=A,$t?|fe3	 	Mu,}bFV{<|@Gí;vQ$'DNG߄I
*ANLg#|4q@ 
Ǉ@
nB2G R;iM[W&0 
/^@d(Qq~e/ۮQlA#LbN]U5 ,x73yrvf͝aգhhLS	z貶}$, :`W8/8ߥ^ZhJN
R&#z^>1ĝ3Ca;ӫZ!i}
zDI
%ooY_zy2(N',?xw4"I+H^V`jymO|W5_%ŏ750w\۱ؔ2
cV"5ևӶ_{UpNz~l7qO#p`=\L[ϕď>{u@1F!i`
B@ex3ũHatö|Y. ܼQ$:[6+ГIĞ*bvMVo<TN7**dg1\wh.$֘V2}a+gǏB͐r{pWEI sB^b*ќ|L';[%LM8/*\'b;/ב?|5?
_R=N:dK
&l5AІJGlVV{E^Odi>euox^z8UEI(^.:3$!lĶ9f;fa=g3Rq,p30_kŮX\ʭO d
vkAW HX|c1VBm_dr1_+o ~(#/xNO`Cr%B3تGfRXP)bMzsF>AR/Y"IC{ZsꌎS/`8/rt9&+|h2a,pJh*-@HAQ2(O)ҥ Lf$MAK@S$2(NV,:PގH<T{'$D5oL
Xs9]wۉ@49CŚJ54Z5uȐpٰūKlOLozN:VS3@Lf9`Ox)lb+s;,ok-w]ozt2);M8d<PaXh|~|em~Ps~pJ?QxޜvZ/BQ"4L`0ld^7M}ql~Sada}S!\EqiYquZתVtE=|,*~6Ǆv	FRPe | XS+-USkP3|K=NKJ'a43U;M83n֕N9oKg&\P\]?~vBߦĦDmWwi|BR*4UKȪ:#ooW]TG#3X*7PtXu2_חgBh*jj҄,9Hk1zDBCbث,CxBʍySdz䀚F%*'l@Tӆ'谥 ҸּCKWSLGeq#6,ɿ0`S5Qi#K <6Db(hu
C*"=
1I8DX`"
p-Qp-6AƵy~|OG# #st|KCfuv)Ed
d>CVE=
#Ai=\\MR[Zbкtim#/gݛR?h^ʺc#l%͊+2{xRXD%<(?$ GA[ۣ7;(ry@ 1o$,uVEH0e*R(=sW/[u>F7HY]Jbv;Su.!}a˝	^{8{A-z'Sۺ8dyfkcD`W~{od퍎񮫱Ϊ}+aWĢ׉ZJ'de0/"`zU27.F+5擬8 vFdp2 0$7щη(HF/b-[jI ъL;Pp%Sҫd6aDl8 J#ATz[wN3
dpؙVZE' sӬvּu[/}RC0?9/._3w)F~8ՙhg1ŉeIwD1Xf2T\r }-zZ+mzxL+=mO&i;Pu<ϜWlB࿈`E>INBk AtƹP4,2.+6X"yMF`eo<_	|Ea)\`,PT?X4AF1
14]1_YGupQdBy[\Z-y!F!kx7f0R$.
Fȋy"aiĉyg(d'dIm< 0& t̄*jK-#0ks1xRBZ~\ű\HrʶCfDh.¢tP?4;d/-=Dڛr'I/})f/NOc2|,~b+Ab7FRJ&52Oi*{+J/:4 cJL!?^ؙ*?,5PxO9.~\,,cwR"l^H^i^
z]5fB/<ߟOilV[-T˫&&92Iz>
BY	jgMTbэF	OlĒR)-?Vl
Bj~l\/_/H4YԶO?<uªSc\j6pSW-=|:GpJwB4(]p=,p`Q\Fۍg̴RmԚdT8Fu0ןTa;cvlfhs*ex,gو·}r6:.GW":3lRMVgQS#Y P/@J8a'I%	QZ,znjX;.pXɝU؛]@E,-3wLS@x
]:4mLI|aVÔ<0eMFgǢƯA頕fE9rR8o)NF^t%좯 ;Z?&$0/މ2PIr#>۸)$ٗJv@\B\ZZ8tTp@B]!\[%9#MVF./E{Y#q3h~wo8]J"@g*/`ϻX>3Jun ,쩐8x!{tox|	ȶp2[A)?S|Z{O?ꡢkW1,0[H[.@p, He
@J,{7/^#Z'/}˨'z: ć-3Pq|?J]&M$+k+3w
lx
z	=ZQdb$20SM]h;Mx?74d	( öYV
!#  
\ĭIL(0'r4hC[o,PTT068@cs""K&ªh&LxȮcXXZAg`EE%e*<pYEs˔Q#˼g>ʐMfih2[Z8QPU3|_?k /'l\,fvZ00,'e
4cɺu
M;{#40_0+2F} RӞdfUWH}ȵ,U2yUæ>lSzY.QDGw`	nôeyW	
k5zfn1K1	-{IM2tq@j&V#15ʺ@0NY}
FV[s߼_+hzBaό7CW$␗.1ORnV֯dIluL썠x֮Qh^#×}tTIbWbh"\k%O[_1c}6f>F\6Irp]p+$#

:
p,H̀jЇ%  65+(8)#FԨ5rH=VyS
cEnŪ@Wp[cF :Ѹ ا[ӝ,y~.Q
jDafc|UR0WǂϽUfVLH̢\%g( V<tAH7ɣVxXTJ<\90 <dHEn%MmX+#K-Px8F?.)*fRCp4`yqjc]\`oSWK(C0kOF'6Y}158i@t#c\/y8"v&tqm;h۞fU՗Y7t6GWW|t<8CFuwSi)^#FΪ.0=9q_rv(ZcYX|.o9|VO
{c+uIiSq;r{L^Vv
`Zsaݪq-P뫧R|4lݮy5$y&ZC"?A:`7ORȹF~!B
_싾&>3noE&`LJg7}XM˛uT{t
mX[(Db{\M7W)Y}}蒞:E~
g׶MAv J%?l_ǂ`%UQLdNT-dzG3d2^'LW_>｜ǷH}ۦ%s© z%=1j6L5|+펨?|'=SmL7쥸r$+99M/Zwo#qhP?{cĸ"lz1AO"3p6xA d_QX1)Q8f-C0
ҟJ{