K README.TXT File for SAMBA V2.2.7A Distribution CD               23-MAR-2003 K ===========================================================================   H This CD distribution was made from a set of .ZIP files found on the web.I The intent is to have a kit that will link and install directly from the  F CD without the need to copy down the entire directory from the CD and " build/install it from local disk.   E The entire source distribution is provided as downloaded, as are the  B object distribution archives which did not originally include the 5 necessary DCL procedures to LINK and INSTALL the kit.   G The functionality of the SAMBA software is in no way modified by this.   Only the packaging was revised.   : Note that IPF (IA64) support is not provided at this time.  G The entire installation procedure (including the uninstall) was tested  H with BYPASS privilege enabled. It is recommended that BYPASS be enabled B for your process, if at all possible; however, SYSPRV may suffice.  E The INSTALL procedure will require SYSPRV and CMEXEC privilege, at a   minimum.     Installing from the CD ----------------------  H The following example illustrates the commands needed to accomplish the 
 installation:   G $ MOUNT/NOASSIST/OVER=ID ddcu:          ! "ddcu:" is your CD-Rom device ? $ @ddcu:[SAMBAU7A022.VMS]LINK           ! Common LINK procedure G $ @ddcu:[SAMBAU7A022.VMS]INSTALL        ! Common installation procedure  $ DISMOUNT ddcu:  G The LINK procedure will place the executables in [.SAMBAU7A022.BIN] in  E your current default directory. The INSTALL procedure will expect to   find them there.  F The INSTALL procedure will ask for the location where the SAMBA files H should be installed. The default location is a [SAMBA] directory on the G system disk. You can specify another directory or another directory on   another volume.   D After INSTALL, you will find a [.SAMBAU7A022.BIN] structure in your D current default directory. This and the files in it can be deleted. H When installing for multiple architectures, these files must be deleted E after the first INSTALL before attempting the second; otherwise, VAX  D executables would be installed for Alpha or vice-versa, for example.     UN-Installing Samba  -------------------   D An UNINSTALL.COM procedure is provided to aid in removing the Samba . software should this be needed for any reason.     Copying the Entire Source Tree ------------------------------  D To build the software from scratch, unpack the SAMBA-2_2_7A-SRC.ZIP F archive to your local disk. This archive includes the program source, A the DCL procedures and FDL files used during the BUILD, LINK and  > INSTALL operations, and the on-line HTML (only) documentation.  5 Two additional archives are also provided on the CD:     o SAMBA-2_2_7A-OBJ.ZIP o SAMBA-2_2_7A-OBJ_VAX.ZIP  F Unpack one or the other, but not both as both archives are built from D the same directory tree. The object files from one archive would be H replaced by those from the other. The original provider of the archives H did not have architecture-specific directories for the binaries (object  files).      On-line Documentation  ---------------------   H HTML (only) documentation is provided as received in the *-SRC archive. C This can be read directly from the CD prior to installation, also.  C Navigate to the [SAMBAU7A022.DOCS.HTMLDOCS] directory and open the  E desired file. A central INDEX.HTML file does not appear to have been  	 provided.     
 Disclaimer
 ----------  I The provider of this kit makes no representation regarding the condition  G of the software or documentation as received and provided, and assumes  G no responsibility for this kit or the results of attempting to install  F or use the kit, or for the usability or suitability to any purpose of G this kit or its contents. Under no circumstances shall the provider of  F this kit be in any way liable for any consequences resulting from any * attempted use of this kit or its contents.  
 [End of text] 