Management and Administration Messages (MAM)

2.8 Management and Administration Messages (MAM)

The following types of Management and Administration Messages are included in the MUP and are each identified by a different heading code H1:

2.8.1 Restart Information Message (RES)

2.8.2 Restart Information Acknowledgement Message (REA)

2.8.3 Security Failure Notification Message (SFN)

2.8.4 Security Failure Notification Acknowledge Message (SFA)

2.8.5 Manufacturer Specific Data Message(MSD)

2.8.6 Manufacturer Specific Data Acknowledge Message (MSA)

2.8.1 Restart Information Message (RES)

Basic format:

g	f	e	d	c	b	a
D.....BA	L.....BA	D.....BA	L.....BA	D.....BA	D.....BA	fe.........BA
SPARE	MTXV IDENTITY	SPARE	MTXH IDENTITY	HEADING CODE H1	HEADING CODE H0	TRANSACTION NUMBER
0/16 Optional		4	12	4	4	32

Figure 2.8.1 Restart Information Message.

The following codes are used:

a) Transaction number.

See paragraph 2.2.

b) Heading code H0 is coded 0110.

c) Heading code H1 is coded 0001.

d) MTXH Identity.

See paragraph 2.4.1.e.

e) Spare

f) MTXV Identity.
This field is optional (In case the RES message is extended in a future edition of the spec, the validity of this field will be optional).

See paragraph 2.4.1.e.

g) Spare
This field is optional (In case the RES message is extended in a future edition of the spec, the validity of this field will be optional).

2.8.2 Restart Information Acknowledgement Message (REA)

Basic format:

c	b	a
D.....BA	D.....BA	fe.........BA
HEADING CODE H1	HEADING CODE H0	TRANSACTION NUMBER
4	4	32

Figure 2.8.2 Restart Information Acknowledgement Message.

The following codes are used:

a) Transaction number.

See paragraph 2.2.

b) Heading code H0 is coded 0110.

c) Heading code H1 is coded 0010.

2.8.3 Security Failure Notification Message (SFN)

Basic format:

f	e	d	c	b	a
H.....BA	DCBA	DCBA	DCBA	DCBA	fe.........BA
MOBILE STATION IDENTITY	NUMBER OF DIGITS	REASON	HEADING CODE H1	HEADING CODE H0	TRANSACTION NUMBER
n*8	4	4	4	4	32
4<n<5
l	k	j	i	h	g
L.....BA	b.....BA	X.....BA	X.....BA	DCBA	L.......BA
BASE STATION IDENTITY	RAND C1...C7	RECEIVED SRES R1...R4	SRES R1...R4	TRAFFIC CASE	RECEIVED MOBILE STATION PASSWORD
12	28	16	16	4	12

Figure 2.8.3 Security Failure Notification Message

The following codes are used:

a) Transaction number.

See paragraph 2.2.

b) Heading code H0 is coded 0110.

c) Heading code H1 is coded 0011.

d) Reason

Bit DCBA:

	0000	Failed password check
	0001	Failed Authentication

e) Number of digits

The field indicates the number of digits contained in the following subfield. It is expressed in the binary form.

f) Mobile Station Identity

Coded as in the paragraph 2.4.1.g

g) Received mobile Station Password (K₁K₂K₃)

This is the mobile station password received from the mobile station.

The digits in the Mobile Station Password, (K₁K₂K₃), are coded as in the paragraph 2.4.1.g. The most significant digit is sent first.

h) Traffic Case

Bit DCBA:

	0000	Originating call from a mobile subscriber
	0001	Terminating call to a mobile subscriber
	0010	Location updating call
	0011	Not used
	0100	Spare
	:	:
	1111	Spare

i) SRES

Coded as in the paragraph 2.9.2.f

j) Received SRES

This is the signed response received from the mobile station. Coded as in the paragraph 2.9.2.f.

k) RAND

Coded as in the paragraph 2.9.2.D.

l) Base Station Identity (B1 B2 B3)

The Identity of the Base Station serving the Mobile Station. The digits B1B2B3 are coded as in paragraph 2.4.1.g. The most significant digit is sent first.

2.8.4 Security Failure Notification Acknowledgement Message (SFA)

Basic format:

c	b	a
D.....BA	D.....BA	fe.........BA
HEADING CODE H1	HEADING CODE H0	TRANSACTION NUMBER
4	4	32

Figure 2.8.4 Security Failure Notification Acknowledge Message

The following codes are used:

a) Transaction number.

See paragraph 2.2.

b) Heading code H0 is coded 0110.

c) Heading code H1 is coded 0100.

2.8.5 Manufacturer Specific Data Message (MSD)

Basic format:

f	e	d	c	b	a
......BA	D.....BA	D..........BA	D.....BA	D.....BA	fe.........BA
SYSTEM DATA	SPARE	MANUFACTURER INDICATORS	HEADING CODE H1	HEADING CODE H0	TRANSACTION NUMBER
n*8	4	4	4	4	32

Figure 2.8.5 Manufacturer Specific Data Message

The following codes are used:

a) Transaction number

See paragraph 2.2

b) Heading code H0 is coded 0110

c) Heading code H1 is coded 0101

d) Manufacturer indicators

Bit DCBA:

	0000	Not in use
	0001	Manufacturer no 1
	0010	Manufacturer no 2
	0011	Manufacturer no 3
	0100	Spare
	:	:
	1111	Spare

e) Spare

f) System data

Contents, coding and length of this field is specified by the manufacturer. This message is for operator-internal use between network elements. Transmit capacity of network elements define the maximum length of the message.

2.8.6 Manufacturer Specific Data Acknowledge Message (MSA)

Basic format:

d	e	d	c	b	a
......BA	D.....BA	D..........BA	D.....BA	D.....BA	fe.........BA
SYSTEM DATA	SPARE	MANUFACTURER INDICATORS	HEADING CODE H1	HEADING CODE H0	TRANSACTION NUMBER
n*8	4	4	4	4	32

Figure 2.8.6 Manufacturer Specific Data Acknowledge Message.

The following codes are used:

a) Transaction number.

See paragraph 2.2.

b) Heading code H0 is coded 0110.

c) Heading code H1 is coded 0110.

d) Manufacturer indicators

Bit DCBA:

	0000	Not in use
	0001	Manufacturer no 1
	0010	Manufacturer no 2
	0011	Manufacturer no 3
	0100	Spare
	:	:
	1111	Spare

e) Spare

f) System data.

Contents, coding and length of this field is specified by the manufacturer. This message is for internal use between network elements. Transmit capacity of network elements define the maximum length of the message.