System Support Addendum ________________________________________________________________ ________________________________________________________________ Product Name: DECforms, Version 1.3 SSA 29.90.03-A HARDWARE REQUIREMENTS Processors Supported VAX: VAXft 3000-310 VAX 4000 Model 300, VAX 6000 Model 200 Series, VAX 6000 Model 300 Series, VAX 6000 Model 400 Series, VAX 6000 Model 500 Series VAX 8200, VAX 8250, VAX 8300, VAX 8350, VAX 8500, VAX 8530, VAX 8550, VAX 8600, VAX 8650, VAX 8700, VAX 8800, VAX 8810, VAX 8820, VAX 8830, VAX 8840 VAX 9000-210, VAX 9000 Model 400 Series VAX-11/730, VAX-11/750, VAX-11/780, VAX-11/785 MicroVAX: MicroVAX II, MicroVAX 2000, MicroVAX 3100, MicroVAX 3300, MicroVAX 3400, MicroVAX 3500, MicroVAX 3600, MicroVAX 3800, MicroVAX 3900 DIGITAL April 1991 AE-ME12D-TE DECforms, Version 1.3 SSA 29.90.03-A VAXstationVAXstation II, VAXstation 2000, VAXstation 3100 Series, VAXstation 3200, VAXstation 3500, VAXstation 3520, VAXstation 3540 VAXserver:VAXserver 3100, VAXserver 3300, VAXserver 3400, VAXserver 3500, VAXserver 3600, VAXserver 3602, VAXserver 3800, VAXserver 3900 VAXserver 4000 Model 300, VAXserver 6000-210, VAXserver 6000-220, VAXserver 6000-310, VAXserver 6000-320, VAXserver 6000-410, VAXserver 6000-420, VAXserver 6000-510, VAXserver 6000-520 Processors Not Supported MicroVAX I, VAXstation I, VAX-11/725, VAX-11/782, VAXstation 8000 Processor Restriction A TK50 Tape Drive is required for MicroVAX 2000 and VAXstation 2000 systems. Terminals 1 VT100 VT100 with AVO VT101 VT102 VT103 2 VT125 VT131 VT220 VT240 3 VT241 3 VT320 3 VT330 4 VT340 VT420 2 DECforms, Version 1.3 SSA 29.90.03-A IBM [R] 3270 compatible 5 1. DECforms also supports the Hebrew versions of the VT100, VT200, and VT300 series terminals. 2. The VT131 is supported in VT102 mode only. 3. DECforms does not support the use of the 25th status line nor the use of the locator device on VT300-series terminals. 4. DECforms panels of up to 72 lines may be defined for VT420 terminals. The VT420 can display 24, 36, or 48 lines on a single screen. Panels consisting of a number of lines greater than the screen size can be panned under local hardware con- trol by the VT420 terminal. DECforms does not support access to the F1-F5 function keys or to the ALTERNATE key. The COM- POSE key is supported when configured for LOCAL COMPOSE. 5. DECforms supports display of forms on IBM 3270-class ter- minals only when those terminals are connected to the CXM04 3270 Terminal Option Card of a DECserver 550. This option card makes the IBM 3270-compatible device appear as a VT220 to the application. Terminal Emulators Terminal emulators on VAXstations and personal computers are supported only to the extent that the emulator conforms to the VT100, VT220, or VT320 environment it is emulating. 3 DECforms, Version 1.3 SSA 29.90.03-A Printers DECforms panels and forms can be printed on any Digital printer. Video attributes are not printed and lines are drawn using the characters "-", "+", " " rather than the line-drawing character set. Disk Space Requirements (Block Cluster Size = 1): Full Development System: Disk space required for 17,000 blocks installation: (9 Mbytes) Disk space required for use (permanent): With samples and demos 16,000 blocks (8 Mbytes) Without samples and demos 7,500 blocks (4 Mbytes) Run-time System: Disk space required for 1,500 blocks installation: (.8 Mbytes) Disk space required for 400 blocks use (permanent): (.2 Mbytes) These counts refer to the disk space required on the system disk. The sizes are approximate; actual sizes may vary depending on the users' system environment, configuration and software options selected. 4 DECforms, Version 1.3 SSA 29.90.03-A OPTIONAL HARDWARE Any device supported by the prerequisite/optional software. CLUSTER ENVIRONMENT This layered product is fully supported when installed on any valid and licensed VAXcluster* configuration without restric- tions. The HARDWARE REQUIREMENTS sections of this product's Software Product Description and System Support Addendum detail any special hardware required by this product. * V5.x VAXcluster configurations are fully described in the VAXcluster Software Product Description (29.78.xx) and in- clude CI, Ethernet and Mixed Interconnect configurations. SOFTWARE REQUIREMENTS o VMS Operating System V5.0 - V5.4 VMS Tailoring The following VMS classes are required for full functionality of this layered product: o VMS Required Saveset o Programming Support o Utilities For more information on VMS classes and tailoring, refer to the VMS Operating System Software Product Description (SPD 25.01.xx). 5 DECforms, Version 1.3 SSA 29.90.03-A OPTIONAL SOFTWARE o VAX CDD/Plus V4.1 - V4.3 o VAX Language-Sensitive Editor/Source Code Analyzer V2.3 - V3.1 (requires VMS V5.1 - V5.3) Any VMS programming language that adheres to the VAX Procedure Calling and Condition Handling Standard. GROWTH CONSIDERATIONS The minimum hardware/software requirements for any future ver- sion of this product may be different from the requirements for the current version. DISTRIBUTION MEDIA Tape: 9-track 1600 BPI Magtape (PE), TK50 Streaming Tape This product is also available as part of the VMS Consolidated Software Distribution on CDROM. ORDERING INFORMATION Full Development System Software Licenses: QL-VCHA*-** Software Media: QA-VCHAA-** Software Documentation: QA-VCHAA-GZ Software Product Services: QT-VCHA*-** 6 DECforms, Version 1.3 SSA 29.90.03-A Run-time System Software Licenses: QL-VNSA*-** Software Media: QA-VNSAA-** Software Product Services: QT-VNSA*-** * Denotes variant fields. For additional information on avail- able licenses, services and media, refer to the appropriate price book. The above information is valid at time of release. Please con- tact your local Digital office for the most up-to-date informa- tion. [R] IBM is a registered trademark of International Business Machines Corporation. [TM] The DIGITAL Logo, VAX, VMS, MicroVAX, VAXstation, VAXserver, VAXcluster, DECforms, DECintact, VT, VAX FMS, VAX TDMS, VAX ACMS, VAXTPU and VAX CDD/Plus are trademarks of Digital Equipment Corporation. 7