AA-MR20B-TE ALL-IN-1_____________________________________________ Installation Guide Part 3 U.S. Market Installation digital equipment corporation maynard, massachusetts AA-MR20B-TE First Printing, December 1989 The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. The software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. Digital Equipment Corporation assumes no responsibility for the use or reliability of its software on equipment that is not supplied by Digital. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013. Copyright (c) Digital Equipment Corporation. 1989. All rights reserved. Please complete the reader's comments page at the end of the book. It will help us to keep improving our documentation. The following are trademarks of Digital Equipment Corporation: ALL-IN-1 MicroVAX VAX DOCUMENT DDIF MicroVMS VAX FMS DEC PDP VAX Grammar Checker DECdx P/OS VAX Notes DECmail Professional VAX RALLY DECmate Rainbow VAX TEAMDATA DECspell RSTS VAX VTX DECtalk RSX VMS DECtalk Mail Access TK50 VT DECUS TOPS-20 Work Processor DECwindows UNIBUS WPS-PLUS DECwriter VAX DIBOL VAXcluster +-+-+-+-+-+-+-+TM MAILbus VAX DATATRIEVE |d|i|g|i|t|a|l| MASSBUS VAX DECpage +-+-+-+-+-+-+-+ Bell is a trademark of Bell telephone companies. Ethernet is a trademark of Xerox Corporation. PostScript is a registered trademark of Adobe Systems, Inc. Vadic is a trademark of Racal-Vadic. This document was prepared using VAX DOCUMENT, Version 1.2. ________________________________________________________________ Contents 1 US Market Installation 1.1 Introduction.................................... 1-1 1.1.1 Distribution Media ........................... 1-1 1.1.2 Useful Information for the US Market Component.................................... 1-2 1.1.3 Disk Space Required During Installation ...... 1-3 1.1.4 Disk Space Used Permanently by ALL-IN-1 ...... 1-5 1.1.4.1 New Installation........................... 1-5 1.1.4.2 Upgrade and Update Installations........... 1-6 1.1.5 Keyboard Support ............................. 1-9 1.1.6 Modems Supported ............................. 1-10 A Files on the ALL-IN-1 Version 2.4 US Market kit A.1 List of Files in Each Saveset................... A-1 iii Tables 1-1 Useful Information for the US Market Component....................................... 1-2 1-2 Disk Space Required on the System Disk During Installation.................................... 1-4 1-3 Disk Space Required for Each ALL-IN-1 Area During Installation............................. 1-4 1-4 Disk Space Required for Each ALL-IN-1 Area...... 1-6 1-5 Disk Space Required for Each ALL-IN-1 Area if Purged.......................................... 1-7 1-6 Disk Space Required for Each Area if Not Purged.......................................... 1-8 1-7 Autodial Modems Supported by ALL-IN-1........... 1-10 iv 1 ________________________________________________________________ US Market Installation 1.1 Introduction This document is for the person responsible for installing ALL-IN-1. It describes information specific to your ALL-IN-1 Version 2.4 US market component. This document does not, by itself, describe the installation of your ALL-IN-1 Version 2.4 US market component. The installation of this component is carried out as part of the main ALL-IN-1 Version 2.4 installation procedure (see the ALL-IN-1 Installation Guide Part 1 Base Installation). The ALL-IN-1 Installation Guide Part 1 Base Installation refers to information contained in this document. 1.1.1 Distribution Media Your ALL-IN-1 Version 2.4 market kit contains the US market component of the ALL-IN-1 Version 2.4 kit and is on two pieces of media. This software for the ALL-IN-1 Version 2.4 US market kit is on the distribution media labeled: ALL-IN-1 V2.4 US BIN media_type MARKET COMPONENT (c) 1989 Digital Equipment Corp. US Market Installation 1-1 where media_type is 16MT9 for tape and TK50 for a TK50 cartridge. The Release Notes Part 2 US market is on the distribution media labeled: ALL-IN-1 V2.4 US BIN media_type RELEASE NOTES PART 2 (c) 1989 Digital Equipment Corp. The US market component contains: Saveset Description A1CUS024.A ALL-IN-1 Version 2.4 US market kit A1CUS024.B ALL-IN-1 Version 2.4 US market kit A1CRUS024.A ALL-IN-1 Release Notes Part 2 US Market A list of files on the ALL-IN-1 Version 2.4 US Market kit is given in Appendix A of this part. 1.1.2 Useful Information for the US Market Component Table 1-1 lists useful information for the US market component of ALL-IN-1 Version 2.4. Table 1-1 Useful Information for the US Market Component _____________________________________________________________ Information______Value_________Use___________________________ Product name A1CUS024 Installation and naming of savesets Market name US Media labeling Market code US During installation Market 1,200 Installation component kit size (blocks) (continued on next page) 1-2 US Market Installation Table 1-1 (Cont.) Useful Information for the US Market Component _____________________________________________________________ Information______Value_________Use___________________________ Disk space used 800 Installation permanently by the market files (blocks) ALL-IN-1 date format: Alphanumeric DD-MMM-YYYY ALL-IN-1 Numeric MM/DD/YY ALL-IN-1 WPS-PLUS date dd-mmm-yyyy WPS-PLUS format WPS-PLUS time colon (:) WPS-PLUS separator Currency format: Currency $ ALL-IN-1 symbol Decimal dot (.) ALL-IN-1 separator Thousand comma (,) ALL-IN-1 separator Page_size________66____________Printer_settings______________ 1.1.3 Disk Space Required During Installation The disk space required during installation depends on whether you are installing ALL-IN-1 on the system disk only, or across several disks (see Table 1-2). US Market Installation 1-3 Table 1-2 Disk Space Required on the System Disk During Installation _____________________________________________________________ System_disk_only________Multiple_disks_______________________ 50,000 + nn 15,000+ _____________________________________________________________ + This value does not include any ALL-IN-1 areas that you may want to place on the system disk. See Section 1.1.4 for the disk space require by each ALL-IN-1 area.) nn The space required for the language files is given in the ALL-IN-1 Installation Guide Part 2 Language Installation for the language you are installing. _____________________________________________________________ If you are upgrading from ALL-IN-1 Version 2.3 or ALL-IN-1 STARTER Version 1.0, or are updating from ALL-IN-1 STARTER Version 2.4, the disk space required on the disk for each ALL-IN-1 area is shown in Table 1-3. Table 1-3 Disk Space Required for Each ALL-IN-1 Area During Installation _____________________________________________________________ Area__________________Disk_Space_____________________________ ALL-IN-1 manager's 100 account+ Shared library files 11,500 Shared data files 4,000 Language files nn Mail area SDAF file 1,000 Shared directories n x 100 _____________________________________________________________ + This figure includes the [.IVPUSER], [.MGR], [.POSTMASTE], [.TRANSFER_INCOMING] and [.TRANSFER_OUTGOING] directories. nn The space required for the language files is given in the ALL-IN-1 Installation Guide Part 2 Language Installation for the language you are installing. _____________________________________________________________ 1-4 US Market Installation 1.1.4 Disk Space Used Permanently by ALL-IN-1 The disk space permanently used by ALL-IN-1 Version 2.4 depends on whether or not you incorporate WPS-PLUS. Table 1-4 shows the disk space requirements for each area of ALL-IN-1. The disk space permanently used by the language files is given in the ALL-IN-1 Installation Guide Part 2 Language Installation for the language you are installing. To ease the management of ALL-IN-1 you can choose to split ALL-IN-1 across several disks, with an ALL-IN-1 area on each disk. The ALL-IN-1 areas are: o ALL-IN-1 manager's account. This account includes the IVPUSER, MGR, POSTMASTE, TRANSFER_INCOMING and TRANSFER_OUTGOING directories. o Shared library files. o Shared data files. o Language files. o Mail area SDAF file OA$SHARE:OA$DAF_y.DAT, where y is a letter from A to E. Mail area E is created during a new installation. o Shared directories OA$SHARynnnn, where nnnn is a number in the range 1 to 9999. An example of the directory structure for a multiple-disk ALL-IN-1 system is given in Appendix C of the ALL-IN-1 Installation Guide Part 1 Base Installation. 1.1.4.1 New Installation The permanent disk space required by each ALL-IN-1 area is shown in Table 1-4. If you want more than one area on the same disk, the disk space required is the total for those areas. US Market Installation 1-5 Table 1-4 Disk Space Required for Each ALL-IN-1 Area _____________________________________________________________ ALL-IN-1 Area ______________Disk_Space_____________ ________________________With_WPS-PLUS____Without_WPS-PLUS____ ALL-IN-1 manager's 1,000 900 account+ Shared library files 31,200 26,500 Shared data files 3,000 3,000 Language files nn nn Mail area SDAF file* 1,000 1,000 Shared directories++ n x 1000 n x 1000 System disk files 4,000 + nn 3,500 + nn _____________________________________________________________ + This figure includes the [.IVPUSER], [.MGR], [.POSTMASTE], [.TRANSFER_INCOMING] and [.TRANSFER_OUTGOING] directories. ++ n is the number of shared directories specified during the installation. * This is the minimum amount of free space required on the disk that is to contain the SDAF file, even though the size of the SDAF file may only be a few blocks, after ALL-IN-1 Version 2.3 is installed. nn The space required for the language files is given in the ALL-IN-1 Installation Guide Part 2 Language Installation for the language you are installing. _____________________________________________________________ 1.1.4.2 Upgrade and Update Installations If you are performing an upgrade or update installation, and you choose to purge files during the installation, the additional disk space required for each area is given in Table 1-5. 1-6 US Market Installation Table 1-5 Disk Space Required for Each ALL-IN-1 Area if Purged _____________________________________________________________ Area _______________Disk_Space______________ Upgrade Upgrade from from ALL-IN-1 Update from ALL-IN-1 STARTER ALL-IN-1 ______________________V2.3________V1.0________STARTER_V2.4___ ALL-IN-1 manager's 100 100 100 account+ Shared library files 3,500 7,800 7,800 Shared data files 100 100 100 Language files nn nn nn Mail area SDAF file Shared directories System disk files 1,500 + nn 1,000 + nn 1,000 + nn _____________________________________________________________ + This figure includes the [.IVPUSER], [.MGR], [.POSTMASTE], [.TRANSFER_INCOMING] and [.TRANSFER_OUTGOING] directories. nn The space required for the language files is given in the ALL-IN-1 Installation Guide Part 2 Language Installation for the language you are installing. _____________________________________________________________ If you are performing an upgrade or update installation, and you choose not to purge files during the installation, the additional disk space required for each area is given in Table 1-6. US Market Installation 1-7 Table 1-6 Disk Space Required for Each Area if Not Purged _____________________________________________________________ Area _______________Disk_Space______________ Upgrade Upgrade from from ALL-IN-1 Update from ALL-IN-1 STARTER ALL-IN-1 ______________________V2.3________V1.0________STARTER_V2.4___ ALL-IN-1 manager's 300 300 300 account+ Shared library files 30,900 35,200 35,200 Shared data files 100 100 100 Language files nn nn nn Mail area SDAF file Shared directories System disk files 5,000 + nn 4,500 + nn 4,500 + nn _____________________________________________________________ + This figure includes the [.IVPUSER], [.MGR], [.POSTMASTE], [.TRANSFER_INCOMING] and [.TRANSFER_OUTGOING] directories. nn The space required for the language files is given in the ALL-IN-1 Installation Guide Part 2 Language Installation for the language you are installing. _____________________________________________________________ 1-8 US Market Installation 1.1.5 Keyboard Support Your kit contains a Keyboard Reference Card and a Keyboard Diagram for the American LK201 and VT100 keyboards. The following keyboard mapping tables are supplied with your ALL-IN-1 Version 2.4 kit: FRENCH_A1_LK201-AA.A1KMT FRENCH_WPS_LK201-AA.A1KMT FRENCH_A1_LK201-AP.A1KMT FRENCH_WPS_LK201-AP.A1KMT FRENCH_A1_LK201-BA.A1KMT FRENCH_WPS_LK201-BA.A1KMT FRENCH_A1_LK201_BP.A1KMT FRENCH_WPS_LK201-BP.A1KMT FRENCH_A1_LK201-NA.A1KMT FRENCH_WPS_LK201-NA.A1KMT FRENCH_A1_LK250-AA.A1KMT FRENCH_WPS_LK250-AA.A1KMT FRENCH_A1_LK250-AP.A1KMT FRENCH_WPS_LK250-AP.A1KMT GERMAN_A1_LK201-AG.A1KMT GERMAN_WPS_LK201-AG.A1KMT GERMAN_A1_LK201-BA.A1KMT GERMAN_WPS_LK201-BG.A1KMT GERMAN_A1_LK201-BG.A1KMT GERMAN_WPS_LK201-BA.A1KMT GERMAN_A1_LK250-AG.A1KMT GERMAN_WPS_LK250-AG.A1KMT SPANISH_A1_LK201-AA.A1KMT SPANISH_WPS_LK201-AA.A1KMT SPANISH_A1_LK201-BA.A1KMT SPANISH_WPS_LK201-BA.A1KMT SPANISH_A1_LK201-BS.A1KMT SPANISH_WPS_LK201-BS.A1KMT SPANISH_A1_LK201-LS.A1KMT SPANISH_WPS_LK201-LS.A1KMT SPANISH_A1_LK250-AS.A1KMT SPANISH_WPS_LK250-AS.A1KMT These mapping tables are invoked by entering: $ ALLIN1/KEYBOARD=keyboard_mapping where keyboard_mapping is the identity of the required keyboard. A list of these keywords is held in OA$DATA_SHARE:OA$KEYBOARDS.DAT (see the ALL-IN-1 Management Guide). US Market Installation 1-9 1.1.6 Modems Supported The autodial feature of the modems listed in Table 1-7 is supported. You can disable this feature by customizing OAMARKET.BLI. Note You must use the Customization Management subsystem to customize ALL-IN-1. Table 1-7 Autodial Modems Supported by ALL-IN-1 _____________________________________________________________ Manufacturer____Model_Number_________________________________ Digital DF02-AC Digital DF03-AC Digital DF100 series Case 440/12 Racal-Milgo MPS1222-AD Racal-Milgo_____MPS1222_with_Racal-Vadic_VA811_______________ In addition, all Bell 212A/103 compatible modems, and modems meeting CCITT V21 and V22 recommendations, are supported as manual-dial modems. Refer to the manuals provided with the modems for information on installing and using modems. 1-10 US Market Installation A ________________________________________________________________ Files on the ALL-IN-1 Version 2.4 US Market kit This appendix contains a list of the files on the ALL-IN-1 Version 2.4 US Market kit. Note *.ELE files are used by the installation procedure to transfer the files to the correct place. These files are removed when the installation is completed. Each saveset has a unique kit revision identifier, , given by the file A102COUNTRYsaveset.REV_ (for example, A1024COUNTRYA.REV_A), where saveset is the saveset identity (A or B). The files in each saveset are listed in the next section. A.1 List of Files in Each Saveset MEDIA: ALL-IN-1 V2.4 US BIN media_type MARKET COMPONENT (c) 1989 Digital Equipment Corp. Save Set: A1CUS024.A A1024COUNTRYA.REV_;1 A1CUS.RELEASE_NOTES;1 KITINSTAL.COM;1 Total of 3 files. Files on the ALL-IN-1 Version 2.4 US Market kit A-1 Save Set: A1CUS024.B A1.CLD;1 A1024COUNTRYB.REV_;1 A1WPSPLUS_DECMATE.COM;1 A1WPSPLUS_IBMPC.COM;1 A1WPSPLUS_PRO.COM;1 A1WPSPLUS_RAINBOW.COM;1 A1WPSPLUS_VAXMATE.COM;1 CREATE_PRINTERTYPES.SCP;1 CXGLOBAL.B32;1 DIRCOUNTRYB.ELE;1 DPEHELP.HLB;1 DPEHELP.HLP;1 FRENCH_A1_LK201-AA.A1KMT;1 FRENCH_A1_LK201-AP.A1KMT;1 FRENCH_A1_LK201-BA.A1KMT;1 FRENCH_A1_LK201-BP.A1KMT;1 FRENCH_A1_LK201-NA.A1KMT;1 FRENCH_A1_LK250-AA.A1KMT;1 FRENCH_A1_LK250-AP.A1KMT;1 FRENCH_WPS_LK201-AA.A1KMT;1 FRENCH_WPS_LK201-AP.A1KMT;1 FRENCH_WPS_LK201-BA.A1KMT;1 FRENCH_WPS_LK201-BP.A1KMT;1 FRENCH_WPS_LK201-NA.A1KMT;1 FRENCH_WPS_LK250-AA.A1KMT;1 FRENCH_WPS_LK250-AP.A1KMT;1 GERMAN_A1_LK201-AG.A1KMT;1 GERMAN_A1_LK201-BA.A1KMT;1 GERMAN_A1_LK201-BG.A1KMT;1 GERMAN_A1_LK250-AG.A1KMT;1 GERMAN_WPS_LK201-AG.A1KMT;1 GERMAN_WPS_LK201-BA.A1KMT;1 GERMAN_WPS_LK201-BG.A1KMT;1 GERMAN_WPS_LK250-AG.A1KMT;1 KICOUNTRY.COM;1 LA100.PRA;1 LA100.PRC;1 LA210.PRA;1 LA210.PRC;1 LA50.PRA;1 LA50.PRC;1 LA75.PRA;1 LA75.PRC;1 LJ250.PRA;1 LJ250.PRC;1 LN01.PRA;1 LN01.PRC;1 LN03.PRA;1 LN03.PRC;1 LN03A4.PRA;1 LN03A4.PRC;1 LP11.PRA;1 LP11.PRC;1 LQP02.PRA;1 LQP02.PRC;1 LQP03.PRA;1 LQP03.PRC;1 LQP45.PRA;1 LQP45.PRC;1 OA$DECSPELL_PREPOP.SCP;1 OA$KEYBOARD_PREPOP.SCP;1 OAFORM_US_BRITISH.FLB;1 OAFORM_US_ENGLISH.FLB;1 OAFORM_US_FRENCH.FLB;1 OAFORM_US_GERMAN.FLB;1 OAFORM_US_SPANISH.FLB;1 OAMARKET.BLI;1 OAMARKET.OBJ;1 QUME.PRA;1 QUME.PRC;1 SPANISH_A1_LK201-AA.A1KMT;1 SPANISH_A1_LK201-BA.A1KMT;1 SPANISH_A1_LK201-BS.A1KMT;1 A-2 Files on the ALL-IN-1 Version 2.4 US Market kit SPANISH_A1_LK201-LS.A1KMT;1 SPANISH_A1_LK250-AS.A1KMT;1 SPANISH_WPS_LK201-AA.A1KMT;1 SPANISH_WPS_LK201-BA.A1KMT;1 SPANISH_WPS_LK201-BS.A1KMT;1 SPANISH_WPS_LK201-LS.A1KMT;1 SPANISH_WPS_LK250-AS.A1KMT;1 VT100.PRA;1 VT100.PRC;1 VT200.PRA;1 VT200.PRC;1 VT300.PRA;1 VT300.PRC;1 WPLCURR_US_BRITISH.MSG;1 WPLCURR_US_ENGLISH.MSG;1 WPLCURR_US_FRENCH.MSG;1 WPLCURR_US_GERMAN.MSG;1 WPLCURR_US_SPANISH.MSG;1 WPLDATES_US_BRITISH.MSG;1 WPLDATES_US_ENGLISH.MSG;1 WPLDATES_US_FRENCH.MSG;1 WPLDATES_US_GERMAN.MSG;1 WPLDATES_US_SPANISH.MSG;1 WPSPRT.TBL;1 Total of 97 files. MEDIA: ALL-IN-1 V2.4 US BIN media_type RELEASE NOTES PART 2 (c) 1989 Digital Equipment Corp. Save Set: A1CRUS024.A A1CRUS024.RELEASE_NOTES;1 KITINSTAL.COM;1 Total of 2 files. Files on the ALL-IN-1 Version 2.4 US Market kit A-3